Ming-Jun Zheng
Research Subjects
Ming-Jun Zheng has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Eh Tan
Institute of Earth Sciences, Academia Sinica, Taipei 11529, Taiwan
4 shared publications Yuan-Hsi Lee
4 shared publications- Chase J. Shyu
Institute for Geophysics, Jackson School of Geosciences, University of Texas at Austin, Texas 78758, United States
1 shared publication Chi-Hsin Chen
1 shared publicationJia-Bin Chang
1 shared publicationShu-Huei Hung
1 shared publication
Latest Publications
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Thermomechanical models of Taiwan’s orogeny with along-strike variability
Taiwan is situated within an active arc–continent collision zone and represents one of the most rapidly exhuming orogens on Earth, characterized by complex structural architecture. In our previous work, we developed a comprehensive thermomechanical model that incorporates the depth-dependent transition from brittle to ductile deformation, lithology-controlled erosion, and observed geometries of the basal decollement and backstop. The model successfully reproduces the key structural features of the northern Taiwan orogen and is consistent with metamorphic temperature profiles, thermochronological constraints, spatial patterns of strain, and the observed rates of exhumation and cooling. The results further demonstrate the critical roles of ductile deformation and ramp structures in the formation of the Hsuehshan Range and the Western fold-and-thrust belt.Structural styles, however, vary systematically from north to south across the Taiwan orogen. Notably, the Hsuehshan Range is absent in southern Taiwan, and total crustal shortening decreases significantly toward the southern tip of the island.Here, we apply the same thermomechanical framework under varying boundary conditions to reconstruct the along-strike evolution of mountain building across Taiwan.Our results indicate that the timing of orogenic onset is comparable along strike, whereas the rate of shortening decreases progressively from north to south. The basal decollement extends to approximately 20 km depth and exhibits variable ramp–flat geometries, leading to distinct structural styles along the orogen. The model successfully captures the development of the Pingtung Basin and the structural evolution of the Hengchun Peninsula, providing a unified framework for understanding the along-strike variability of Taiwan’s orogeny.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessThermomechanical models of Taiwan’s orogeny with along-strike variability
Taiwan is situated within an active arc–continent collision zone and represents one of the most rapidly exhuming orogens on Earth, characterized by complex structural architecture. In our previous work, we developed a comprehensive thermomechanical model that incorporates the depth-dependent transition from brittle to ductile deformation, lithology-controlled erosion, and observed geometries of the basal decollement and backstop. The model successfully reproduces the key structural features of the northern Taiwan orogen and is consistent with metamorphic temperature profiles, thermochronological constraints, spatial patterns of strain, and the observed rates of exhumation and cooling. The results further demonstrate the critical roles of ductile deformation and ramp structures in the formation of the Hsuehshan Range and the Western fold-and-thrust belt.Structural styles, however, vary systematically from north to south across the Taiwan orogen. Notably, the Hsuehshan Range is absent in southern Taiwan, and total crustal shortening decreases significantly toward the southern tip of the island.Here, we apply the same thermomechanical framework under varying boundary conditions to reconstruct the along-strike evolution of mountain building across Taiwan.Our results indicate that the timing of orogenic onset is comparable along strike, whereas the rate of shortening decreases progressively from north to south. The basal decollement extends to approximately 20 km depth and exhibits variable ramp–flat geometries, leading to distinct structural styles along the orogen. The model successfully captures the development of the Pingtung Basin and the structural evolution of the Hengchun Peninsula, providing a unified framework for understanding the along-strike variability of Taiwan’s orogeny.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
Arc-continent collision and mountain building processes of the Taiwan orogeny
The Taiwan orogeny, a notable example of arc-continent collision, features complex geological structures, rapid exhumation, and dynamic deformation. To better understand these processes, we developed advanced thermomechanical models incorporating dehydration and hydration of serpentinite, partial melting and magma migration in the mantle wedge, elasto-visco-plastic rheology, lithology-dependent erosion, and observed boundary geometries. These models successfully replicate key features of the Taiwan orogeny, including fault distributions, seismicity patterns, and metamorphic temperature profiles. They align with thermochronological records, accurately reflecting rates of exhumation and cooling, and reproduce strain distributions and structural complexities consistent with geodetic and geological data. This study highlights the effectiveness of thermomechanical modeling in capturing the evolution of arc-continent collision zones, offering insights into the driving mechanisms of mountain building. These findings provide a valuable framework for exploring similar tectonic settings globally.
- 18 March 2025
- Published by Copernicus GmbH
Open AccessArc-continent collision and mountain building processes of the Taiwan orogeny
The Taiwan orogeny, a notable example of arc-continent collision, features complex geological structures, rapid exhumation, and dynamic deformation. To better understand these processes, we developed advanced thermomechanical models incorporating dehydration and hydration of serpentinite, partial melting and magma migration in the mantle wedge, elasto-visco-plastic rheology, lithology-dependent erosion, and observed boundary geometries. These models successfully replicate key features of the Taiwan orogeny, including fault distributions, seismicity patterns, and metamorphic temperature profiles. They align with thermochronological records, accurately reflecting rates of exhumation and cooling, and reproduce strain distributions and structural complexities consistent with geodetic and geological data. This study highlights the effectiveness of thermomechanical modeling in capturing the evolution of arc-continent collision zones, offering insights into the driving mechanisms of mountain building. These findings provide a valuable framework for exploring similar tectonic settings globally.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Numerical modelling of continental margin of the Eurasian Plate Rifting and Tectonic evolution.Causes of the highest metamorphic temperature in the Hsuehshan Range and Backbone Range
Many orogenic belts today preserve evidence of past crustal rifting. During the syn-rifting, the crust undergoes thinning, forming rift basins with thick sedimentary deposits. The upwelling of the mantle during this extensional phase increases the geothermal gradient within the basin, affecting the crust and sedimentary rocks.In this study, we used numerical models to simulate the temperature changes in sedimentary rocks within rift basins during both the active rifting phase and the passive continental margin phase after rifting cessation. We found that under a stretching rate of 0.7 cm per year, after 20 million years of continuous stretching, the geothermal gradient within the basin can reach 50-60°C per kilometer, with sedimentary rocks reaching temperatures as high as 450-500°C. After 20 million years of cooling following the end of stretching, the temperatures of the sedimentary rocks decrease by nearly 100°C, and the geothermal gradient reduces to approximately 30°C per kilometer.We believe that these phenomena can be correlated with the evolution of the Hsuehshan Range in Taiwan, which experienced a transition from rifting to a passive continental margin. During the rifting phase, the temperatures of the sedimentary rocks within the basin reached high metamorphic temperatures of 450-500°C, as indicated by carbonaceous material Raman spectroscopy (RSCM). As the region entered the passive continental margin phase, the rocks gradually cooled, with a temperature decrease of nearly 100°C prior to the onset of mountain building in Taiwan. Similar high-temperature metamorphic temperatures were obtained through RSCM analysis along the Central Cross-Island Highway and Northern Cross-Island Highway, exceeding the closure temperatures of zircon core tracks. However, some zircon core tracks in certain areas did not yield closure ages, suggesting that the high metamorphic temperatures obtained from RSCM analysis were inherited from previous stretching events rather than occurring during the Penglai orogeny.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessNumerical modelling of continental margin of the Eurasian Plate Rifting and Tectonic evolution.Causes of the highest metamorphic temperature in the Hsuehshan Range and Backbone Range
Many orogenic belts today preserve evidence of past crustal rifting. During the syn-rifting, the crust undergoes thinning, forming rift basins with thick sedimentary deposits. The upwelling of the mantle during this extensional phase increases the geothermal gradient within the basin, affecting the crust and sedimentary rocks.In this study, we used numerical models to simulate the temperature changes in sedimentary rocks within rift basins during both the active rifting phase and the passive continental margin phase after rifting cessation. We found that under a stretching rate of 0.7 cm per year, after 20 million years of continuous stretching, the geothermal gradient within the basin can reach 50-60°C per kilometer, with sedimentary rocks reaching temperatures as high as 450-500°C. After 20 million years of cooling following the end of stretching, the temperatures of the sedimentary rocks decrease by nearly 100°C, and the geothermal gradient reduces to approximately 30°C per kilometer.We believe that these phenomena can be correlated with the evolution of the Hsuehshan Range in Taiwan, which experienced a transition from rifting to a passive continental margin. During the rifting phase, the temperatures of the sedimentary rocks within the basin reached high metamorphic temperatures of 450-500°C, as indicated by carbonaceous material Raman spectroscopy (RSCM). As the region entered the passive continental margin phase, the rocks gradually cooled, with a temperature decrease of nearly 100°C prior to the onset of mountain building in Taiwan. Similar high-temperature metamorphic temperatures were obtained through RSCM analysis along the Central Cross-Island Highway and Northern Cross-Island Highway, exceeding the closure temperatures of zircon core tracks. However, some zircon core tracks in certain areas did not yield closure ages, suggesting that the high metamorphic temperatures obtained from RSCM analysis were inherited from previous stretching events rather than occurring during the Penglai orogeny.
- Open Access
- 26 February 2023
- Published by Copernicus GmbH
Numerical modeling of north china craton Thinning and destruction.
The North China Craton is located on the Eurasian continental margin. Since the Mesozoic, the Izanagi and Pacific plates are subducting westward with the trench retreating eastward over time. This process is accompanied by extensive magmatism, development of rift basins, and the formation of the Japan sea. The lithosphere of the North China Craton, which is about 220 km thick, gradually becomes thinner from west to east down to around 60-80 km. Due to extensive magmatism between 140-120Ma, we believe that the North China Craton was positioned at the back-arc area of the Eurasian continental margin where the Izanagi plate currently subducts, and the trench gradually migrated eastward. We assume that the subduction event formed a large-scale high-temperature weak zone, similar to the high-temperature back-arc region mentioned in (Currie & Hyndman, 2006). By using thermo-mechanical modeling, we simulated the Craton break-up process. Following a continuous eastward extension model characterized by normal faulting and lithospheric thinning, we approximated the observed lithospheric variations. If the extension of the Japan sea is not considered, lithospheric thickness was simulated to decrease from 220 km to 60 km eastward. Within 600 km of tension, continuous lithospheric thinning will eventually lead to the formation of oceanic crust (Japan sea). We tested the mechanism affecting lithosphere thinning and found that a large-scale initial high-temperature weak zone and a low-viscosity mantle (with a large amount of fluid participation) are the key factors for the break-up of the North China craton.
- 26 February 2023
- Published by Copernicus GmbH
Open AccessNumerical modeling of north china craton Thinning and destruction.
The North China Craton is located on the Eurasian continental margin. Since the Mesozoic, the Izanagi and Pacific plates are subducting westward with the trench retreating eastward over time. This process is accompanied by extensive magmatism, development of rift basins, and the formation of the Japan sea. The lithosphere of the North China Craton, which is about 220 km thick, gradually becomes thinner from west to east down to around 60-80 km. Due to extensive magmatism between 140-120Ma, we believe that the North China Craton was positioned at the back-arc area of the Eurasian continental margin where the Izanagi plate currently subducts, and the trench gradually migrated eastward. We assume that the subduction event formed a large-scale high-temperature weak zone, similar to the high-temperature back-arc region mentioned in (Currie & Hyndman, 2006). By using thermo-mechanical modeling, we simulated the Craton break-up process. Following a continuous eastward extension model characterized by normal faulting and lithospheric thinning, we approximated the observed lithospheric variations. If the extension of the Japan sea is not considered, lithospheric thickness was simulated to decrease from 220 km to 60 km eastward. Within 600 km of tension, continuous lithospheric thinning will eventually lead to the formation of oceanic crust (Japan sea). We tested the mechanism affecting lithosphere thinning and found that a large-scale initial high-temperature weak zone and a low-viscosity mantle (with a large amount of fluid participation) are the key factors for the break-up of the North China craton.