HLHuanlao Liu

Huanlao Liu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Huanlao Liu has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Research on the Formation Mechanism and Distribution Characteristics of Surface Roughness in End Milling

    by Can Liu, Zhiyi Mo, Runhua Lu, Jiajia He, Ningxia Yin, Huanlao Liu

    The cutting variables of end milling are positively correlated with the machined surface roughness, but their mechanism of action remains unclear. Since the cutting tool used in end milling is a three-dimensional solid, under the action of horizontal cutting force, there exist both axial tensile strain and axial compressive strain in the cutting tool at the same time, thus putting forward an assumption about the formation mechanism of machined surface roughness: cutting variables affect the axial tensile strain of the cutting edge through the horizontal cutting force, and cause the cutting-edge tip to vertically wedge into the machined surface, thereby influencing the unevenness of the processed surface. Based on the cutting-tool deflection model of a two-segment cantilever beam and the horizontal cutting force formula, the mathematical expression for the axial strain at the sharp tip of the cutting edge was derived. Groove milling and half-groove milling experiments were done, and the experimental results show that the roughness Ra value in the central area is significantly higher than that in the cut-in area, with its maximum average value being 1.32 times that of the cut-in area. The surface roughness rises following the rise in depth of machining and feed per cutting tooth, but this relationship is significant. The laboratory findings are consistent with the theoretical analysis results, indicating that the assumption about the formation mechanism of surface roughness should be reasonable, and the surface roughness in the central area is greater than that in the cutting tool cut-in area. The research results provide a kind of new insight into the formation mechanism of machined surface roughness, which can serve as a reference for relevant research and cutting practices.


  • Open Access

    Research on a Universal Analytical Thermal Circuit Model for Civil Electric Cables

    by Can Liu, Kaiquan Mai, Ningxia Yin, Huanlao Liu, Zhong Zheng

    The measured standard resistance at 20 °C (R20) is a critical indicator for evaluating the quality of electric cables. Utilizing a thermal circuit model allows for the rapid determination of R20. Focusing on civil electrical cables, this study constructs a thermal circuit model based on an equivalent circuit. Through mathematical derivation, model parameters are expressed as functions of the insulation cross-sectional area and conductor specification. Subsequently, the insulation area is fitted to the conductor specification, establishing a universal analytical thermal circuit model with the conductor specification as the sole variable. Ambient temperatures measured under specific operating conditions showed exponential variation. Using corresponding simulated conductor temperatures, the Differential Evolution algorithm was employed to train the model, achieving a training standard deviation of 0.0184 °C. Validation under different conditions demonstrated that for various cable specifications, the conductor temperature prediction deviation within 300 s remained within 0.368 °C, and the maximum estimation error for R20 was less than 0.148%. These results indicate that the established model possesses high calculation accuracy and strong universality, offering a valuable tool for researchers and practitioners in fields relevant to civil electrical cables.


  • Open Access

    Research on Milling Burrs of ALSI304 Stainless Steel with Consideration of Tool Eccentricity

    by Can Liu, Jiajia He, Runhua Lu, Zhiyi Mo, Huanlao Liu, Ningxia Yin

    Burrs are a significant machining defect affecting the quality of precision parts, and tool eccentricity may substantially influence milling burrs. Using AISI 304 stainless steel as the workpiece material, a three-dimensional thermo-mechanical coupled model for slot milling was constructed based on an explicit dynamics model. Combining the Johnson–Cook (J-C) constitutive model with the J-C shear failure criterion, simulations were conducted to obtain burr dimensions, cutting temperature distributions, and cutting force waveforms under different tool eccentricity directions and magnitudes. Results: As the eccentricity increases, the temperature of the top burr rises, and both the width of the top burr and the thickness of the exit side burr significantly increase. Under simulated conditions, the width of the top burr in down milling side increased by up to 70%. The burr dimensions under different eccentricity directions can differ by approximately 40%. Groove milling experiments revealed similar burr shapes between experimental and simulated results. Furthermore, the simulated cutting force waveforms aligned with those in the literature, indicating the reliability of the simulation outcomes. Based on these findings, it can be concluded that tool eccentricity significantly affects the dimensions of top burrs and exit side burrs. The width of top burrs and the thickness of exit side burrs are positively correlated with the tool eccentricity distance, while exit bottom burrs remain unaffected by eccentricity. These research results provide valuable reference for burr suppression in practical machining operations.


  • Open Access

    Coating Extrusion Characteristics of Thin-Walled Tubes for Catheters Using Thermoplastic Elastomer

    by You He, Huanlao Liu, Yulin Wang, Weikang Hu

    During the production of medical thin-walled tubes, a thin coating layer is required. This requirement reduces the cross-sectional clearance area of the straight section flow channel formed by the mandrel and the die, leading to excessive pressure of the polymer melt at the shaping section, elevated die pressure, and backflow of the material melt, all of which directly impact the quality of the coating layer. To address these issues, this study conducted a non-isothermal numerical simulation of coating models both with and without a shaping section. It analyzed the impact of the coating model without a shaping section on the coating layer’s thickness and the stability of the coating flow field under varying drag velocities, inlet flow rates, and die temperatures. Furthermore, it compared these results with those of coating extrusion using shaping section runners and investigates how different flow channel parameters affect the extrusion characteristics of the coating layer. The results showed that the setting of the shaping section could not eliminate the extrusion expansion in wrap extrusion. In comparison to coating extrusion utilizing a shaping section die, the process without a shaping section die reduced die pressure drop by 35% to 40%, decreased energy consumption, and enhanced the quality of the coating layer. Finally, an amorphous segment-coating extrusion die was designed based on the simulation results, and coating extrusion experiments were carried out using the designed and fabricated die.


  • Open Access

    Improved Hybrid Grey Wolf Optimization Algorithm Based on Dimension Learning-Based Hunting Search Strategy

    by Chuanjing Zhang, Huanlao Liu, Qunlong Zhou, Can Liu

    An improved hybrid grey wolf optimization algorithm (IHGWO) is proposed to solve the problem of population diversity, imbalance of exploration and development capabilities, and premature convergence. The algorithm benefits from particle swarm optimization and a dimension learning-based hunting search strategy. In the particle swarm algorithm search strategy, linear variable social learning and self-learning are introduced to improve the population’s ability to communicate information. The individual position, current iteration optimal position, and optimal population position of grey wolves are combined to update the individual position information, thus strengthening the communication between individuals and the population. In the dimension learning-based hunting search strategy, neighborhoods are built for each search member, and neighborhood members can share information, balance global and local searches, and maintain diversity. To validate the algorithm, 23 typical benchmark functions, CEC2022 benchmark functions, and engineering problem sinusoidal low-order-polynomial prediction of positioning error of numerical control machine tools are used to optimize the algorithm’s parameters. Results are compared with those from four other algorithms and analyzed using Friedman’s statistical test. Experimental and statistical tests reveal that the IHGWO algorithm has the best overall benchmark function rating, with an overall effectiveness of 87.23%. In the engineering parameter optimization problem, the mean square error, root mean square error, and goodness of fit of the prediction equation after IHGWO algorithm optimization are 95.3761, 9.7661, and 97.47%, respectively. These numerical values are superior to those of the compared algorithms, effectively demonstrating the comprehensive performance and applicability of the algorithm.


  • Study on Strain-measuring of High-speed Bowl of Milk-Separator Based on Digital Image Correlation

    by Xiao-Ning Xue, Zhi Ni, Huan-Lao Liu, Wen-Juan Wang, Qing-Hua Zhang, Jian-Hua He

    Due to the high-speed rotation of the bowl of the disc-separator, the domestic study has not been able to solve the problem of actual measurement of its strain. In order to investigate the feasibility, reliability and application effect of the non-contacting measurement of strain of the high-speed bowl by the digital image correlation (DIC). Using the principal strain of the bowl shell of the milk separator in the rotating state, and measure the strain values of each point along the circumferential and axial directions of the conical and cylindrical of the bowl under no-load and water-loaded conditions, and the strain distribution law curves are drawn and analyzed. The shortcomings of high-speed slip-ring initiator and wireless telemetry are analyzed, and the working principle of DIC and the test procedure are discussed. The test results show that: DIC is used for high-speed bowl strain measurement. The technology is feasible and effective, easy to realize, and has technological advancement and reliability in disc-separator. The application of this technology to the disc-separator will provide effective data support for simulation model verification, structural optimization, strength assessment, and has important theoretical and engineering practical significance.