Eloisa Raluy-López
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Eloisa Raluy-López has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Juan Pedro Montávez
Universidad de Murcia (Murcia, Spain)
40 shared publications - Pedro Jiménez-Guerrero
Physics of the Earth, Regional Campus of International Excellence (CEIR) “Campus Mare Nostrum”, University of Murcia, Murcia, Spain
28 shared publications - Leandro Segado-Moreno
Physics of the Earth, Regional Campus of International Excellence (CEIR) “Campus Mare Nostrum", University of Murcia, Murcia, Spain
22 shared publications - Ginés Garnés-Morales
Department of Meteorology, University of Reading, Reading, United Kingdom
11 shared publications Domingo Muñoz-Esparza
10 shared publications- Ester García-Fernández
Department of Geography, Regional Campus of International Excellence (CEIR) Campus Mare Nostrum, University of Murcia, Murcia, 30001, Spain
10 shared publications
Latest Publications
- Open Access
- 7 September 2026
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 26 (17) , 12641-12669
Impact of high-resolution soil erodibility datasets on dust simulations in WRF-Chem with the GOCART scheme
Mineral dust is a major atmospheric aerosol influencing climate, air quality, and human health through radiative and microphysical processes. The Iberian Peninsula is frequently affected by North African dust intrusions, leading to episodic PM 10 exceedances that challenge air quality forecasting. However, accurate representation of dust emissions remains limited by uncertainties in soil erodibility, land surface properties, and meteorological forcing. This study evaluates the impact of two high-resolution soil erodibility datasets on dust simulations using WRF-Chem with the GOCART scheme. The first dataset, EROD-HR, integrates fine-resolution topography to improve dust source representation at 0.0625° (about 5 km) globally and 1 km over the Iberian Peninsula. The second dataset, SOILHD, further refines dust source characterization by incorporating high-resolution soil texture (sand, silt, and clay fractions) and removing misclassified bare-soil areas, resulting in a 1 km global resolution. Both datasets aim to better capture the spatial heterogeneity of dust sources. Simulations are conducted for five dust episodes between 2022 and 2025, covering local and long-range transport conditions. Model performance is evaluated against PM 10 observations from the SINQLAIR network in the Region of Murcia. Results show improved representation of dust emissions, with better agreement in magnitude and timing of PM 10 peaks at inland stations. Improvements are more limited at coastal and anthropogenically influenced sites, although statistical metrics (correlation, bias, RMSE) indicate consistent gains. Overall, high-resolution erodibility datasets enhance dust simulations by reducing biases and improving variability representation, highlighting the importance of detailed land-surface information for regional dust forecasting systems.
- 7 September 2026
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 26 (17) , 12641-12669
Open AccessImpact of high-resolution soil erodibility datasets on dust simulations in WRF-Chem with the GOCART scheme
Mineral dust is a major atmospheric aerosol influencing climate, air quality, and human health through radiative and microphysical processes. The Iberian Peninsula is frequently affected by North African dust intrusions, leading to episodic PM 10 exceedances that challenge air quality forecasting. However, accurate representation of dust emissions remains limited by uncertainties in soil erodibility, land surface properties, and meteorological forcing. This study evaluates the impact of two high-resolution soil erodibility datasets on dust simulations using WRF-Chem with the GOCART scheme. The first dataset, EROD-HR, integrates fine-resolution topography to improve dust source representation at 0.0625° (about 5 km) globally and 1 km over the Iberian Peninsula. The second dataset, SOILHD, further refines dust source characterization by incorporating high-resolution soil texture (sand, silt, and clay fractions) and removing misclassified bare-soil areas, resulting in a 1 km global resolution. Both datasets aim to better capture the spatial heterogeneity of dust sources. Simulations are conducted for five dust episodes between 2022 and 2025, covering local and long-range transport conditions. Model performance is evaluated against PM 10 observations from the SINQLAIR network in the Region of Murcia. Results show improved representation of dust emissions, with better agreement in magnitude and timing of PM 10 peaks at inland stations. Improvements are more limited at coastal and anthropogenically influenced sites, although statistical metrics (correlation, bias, RMSE) indicate consistent gains. Overall, high-resolution erodibility datasets enhance dust simulations by reducing biases and improving variability representation, highlighting the importance of detailed land-surface information for regional dust forecasting systems.
- Open Access
- 17 July 2026
- Published by Copernicus GmbH
Urban climate and air quality feedbacks: a high-resolution WRF-Chem study
Urban areas modify the exchanges of energy, moisture, and momentum between the surface and the atmosphere through the combined effects of materials, urban morphology, and anthropogenic emissions. These modifications influence both local meteorological conditions and air quality, generating a complex system of interactions. While urban climate affects the transport, dispersion, and accumulation of atmospheric pollutants, air pollution can also alter radiative processes and influence local meteorology, leading to a coupled atmosphere–chemistry system.This study investigates the interactions between urban climate and air quality over the metropolitan areas of Madrid and Murcia (Spain) using the WRF-Chem model. A set of high-resolution simulations was performed employing a one-way nested configuration, with an outer domain covering the Iberian Peninsula and two inner domains centered on the target cities. Pollutant emissions were represented using a high-resolution downscaled inventory that resolves major emission sources, including road networks, industrial areas, airports, and agricultural land uses. Four main experiment families were considered: rural and urban configurations, each with and without atmospheric chemistry. Additional sensitivity experiments were conducted to assess the impact of emission strength and urban representation.The experimental framework allows assessment of both the influence of urban processes on pollutant distributions and the impact of atmospheric composition on urban meteorology. Particular attention is paid to the role of urban canopy models in shaping near-surface thermal patterns and local circulations, as well as to the extent to which urban-induced meteorological modifications affect air-quality conditions across the metropolitan area.The results highlight the interactions between urban climate and atmospheric chemistry and emphasize the importance of realistically representing urban morphology and emissions in coupled modeling systems. Acknowledgments: The authors acknowledge the ARUBA project (PID2023-149080OB-I00/MCIN/AEI/10.13039/501100011033, Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación, Spain & FEDER, EU), and the INSIEME project (FSRM/10.13039/100007801). ERL thanks her predoctoral contract FPU (FPU21/02464) to the Ministerio de Universidades of Spain.
- 17 July 2026
- Published by Copernicus GmbH
Open AccessUrban climate and air quality feedbacks: a high-resolution WRF-Chem study
Urban areas modify the exchanges of energy, moisture, and momentum between the surface and the atmosphere through the combined effects of materials, urban morphology, and anthropogenic emissions. These modifications influence both local meteorological conditions and air quality, generating a complex system of interactions. While urban climate affects the transport, dispersion, and accumulation of atmospheric pollutants, air pollution can also alter radiative processes and influence local meteorology, leading to a coupled atmosphere–chemistry system.This study investigates the interactions between urban climate and air quality over the metropolitan areas of Madrid and Murcia (Spain) using the WRF-Chem model. A set of high-resolution simulations was performed employing a one-way nested configuration, with an outer domain covering the Iberian Peninsula and two inner domains centered on the target cities. Pollutant emissions were represented using a high-resolution downscaled inventory that resolves major emission sources, including road networks, industrial areas, airports, and agricultural land uses. Four main experiment families were considered: rural and urban configurations, each with and without atmospheric chemistry. Additional sensitivity experiments were conducted to assess the impact of emission strength and urban representation.The experimental framework allows assessment of both the influence of urban processes on pollutant distributions and the impact of atmospheric composition on urban meteorology. Particular attention is paid to the role of urban canopy models in shaping near-surface thermal patterns and local circulations, as well as to the extent to which urban-induced meteorological modifications affect air-quality conditions across the metropolitan area.The results highlight the interactions between urban climate and atmospheric chemistry and emphasize the importance of realistically representing urban morphology and emissions in coupled modeling systems. Acknowledgments: The authors acknowledge the ARUBA project (PID2023-149080OB-I00/MCIN/AEI/10.13039/501100011033, Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación, Spain & FEDER, EU), and the INSIEME project (FSRM/10.13039/100007801). ERL thanks her predoctoral contract FPU (FPU21/02464) to the Ministerio de Universidades of Spain.
- Open Access
- 17 July 2026
- Published by Copernicus GmbH
Improving the Spatial Representation of Emission Sources for Regional Air Quality Modelling
Accurate characterization of atmospheric pollution is essential for understanding its impacts on human health, ecosystems, and climate, as well as for supporting the development of effective air quality management strategies. Numerical atmosphere–chemistry models are powerful tools for studying pollutant dynamics and assessing mitigation measures. However, the quality of their predictions strongly depends on the accuracy of the emission inventories used as input.Most available emission inventories are provided at relatively coarse spatial resolutions, limiting their ability to represent the detailed distribution of emission sources, particularly in heterogeneous urban and regional environments. To address this limitation, we developed a methodology to generate very high-resolution emission fields from low-resolution inventories using a range of geospatial datasets. Emissions from different sectors are spatially redistributed according to their physical origin, including road networks for traffic emissions, airport infrastructure for aviation, industrial facilities for industrial sources, and land-use or population density datasets for other anthropogenic activities. The methodology also incorporates sector-specific vertical allocation and temporal profiles, allowing emissions to vary realistically at hourly, weekly, and seasonal scales.The methodology was evaluated over the Region of Murcia (southeastern Spain) by comparison with an independently developed high-resolution emission inventory. The results showed a good agreement between both datasets. Furthermore, air quality simulations driven by the old and new emissions were compared with observational data, demonstrating an improved representation of pollutant concentrations and confirming the potential of the proposed approach to enhance air quality modelling at regional scales.
- 17 July 2026
- Published by Copernicus GmbH
Open AccessImproving the Spatial Representation of Emission Sources for Regional Air Quality Modelling
Accurate characterization of atmospheric pollution is essential for understanding its impacts on human health, ecosystems, and climate, as well as for supporting the development of effective air quality management strategies. Numerical atmosphere–chemistry models are powerful tools for studying pollutant dynamics and assessing mitigation measures. However, the quality of their predictions strongly depends on the accuracy of the emission inventories used as input.Most available emission inventories are provided at relatively coarse spatial resolutions, limiting their ability to represent the detailed distribution of emission sources, particularly in heterogeneous urban and regional environments. To address this limitation, we developed a methodology to generate very high-resolution emission fields from low-resolution inventories using a range of geospatial datasets. Emissions from different sectors are spatially redistributed according to their physical origin, including road networks for traffic emissions, airport infrastructure for aviation, industrial facilities for industrial sources, and land-use or population density datasets for other anthropogenic activities. The methodology also incorporates sector-specific vertical allocation and temporal profiles, allowing emissions to vary realistically at hourly, weekly, and seasonal scales.The methodology was evaluated over the Region of Murcia (southeastern Spain) by comparison with an independently developed high-resolution emission inventory. The results showed a good agreement between both datasets. Furthermore, air quality simulations driven by the old and new emissions were compared with observational data, demonstrating an improved representation of pollutant concentrations and confirming the potential of the proposed approach to enhance air quality modelling at regional scales.
- Open Access
- 17 July 2026
- Published by Copernicus GmbH
Circulation Patterns of Compound Atmospheric Events Associated with Wintertime Mortality Excess in Mainland Spain
Numerous studies have demonstrated the impacts of extreme meteorological events and air pollution on public health. Nonetheless, only a few consider the synergy of both factors (compound events) when analysing mortality rates from an atmospheric perspective. This work aims to establish connections between mortality excesses in mainland Spain during wintertime, extreme atmospheric events, and the circulation patterns involved in these episodes. For that, daily mortality rate data at a provincial level are used for the 2015-2022 period.Winter mortality extremes were categorised and associated with preceding circulation types (CTs), based on sea-level pressure (SLP), temperature at 850 mb, and geopotential height at 500 mb. This classification uses daily average fields derived from ERA5 reanalysis over a domain covering the entire Iberian Peninsula. This classification uses daily average fields derived from ERA5 reanalysis over a domain covering the entire Iberian Peninsula. For each resulting CT, mean fields of temperature, NO2, and PM10 were computed using CAMS reanalysis data. The results show that most mortality extremes succeed extreme atmospheric conditions, with a time lag that depends on the location and variable considered. The variables that better explain mortality include maximum and minimum temperature, nitrogen dioxide (NO2), particulate matter (PM10), and their combinations. Their influences from previous days are significant for more than half of the cases, especially when the compound event comprising extreme minimum temperature followed by high levels of NO2 occurs, with a median lag of about one week.Regarding the circulation patterns, the results show that most cases of high mortality are linked to anticyclonic systems and warm temperatures at high levels, which can lead to very cold conditions at the ground level and contribute to air stagnation. The situation is exacerbated with the concatenation of CTs related to cold conditions. Extreme mortality occurs when CTs associated with high NO2 levels join persistent low temperatures. This phenomenon may impact multiple provinces simultaneously or within a short timeframe, suggesting that early warning systems should consider these events to alert vulnerable populations and prevent nationwide high mortality rates.
- 17 July 2026
- Published by Copernicus GmbH
Open AccessCirculation Patterns of Compound Atmospheric Events Associated with Wintertime Mortality Excess in Mainland Spain
Numerous studies have demonstrated the impacts of extreme meteorological events and air pollution on public health. Nonetheless, only a few consider the synergy of both factors (compound events) when analysing mortality rates from an atmospheric perspective. This work aims to establish connections between mortality excesses in mainland Spain during wintertime, extreme atmospheric events, and the circulation patterns involved in these episodes. For that, daily mortality rate data at a provincial level are used for the 2015-2022 period.Winter mortality extremes were categorised and associated with preceding circulation types (CTs), based on sea-level pressure (SLP), temperature at 850 mb, and geopotential height at 500 mb. This classification uses daily average fields derived from ERA5 reanalysis over a domain covering the entire Iberian Peninsula. This classification uses daily average fields derived from ERA5 reanalysis over a domain covering the entire Iberian Peninsula. For each resulting CT, mean fields of temperature, NO2, and PM10 were computed using CAMS reanalysis data. The results show that most mortality extremes succeed extreme atmospheric conditions, with a time lag that depends on the location and variable considered. The variables that better explain mortality include maximum and minimum temperature, nitrogen dioxide (NO2), particulate matter (PM10), and their combinations. Their influences from previous days are significant for more than half of the cases, especially when the compound event comprising extreme minimum temperature followed by high levels of NO2 occurs, with a median lag of about one week.Regarding the circulation patterns, the results show that most cases of high mortality are linked to anticyclonic systems and warm temperatures at high levels, which can lead to very cold conditions at the ground level and contribute to air stagnation. The situation is exacerbated with the concatenation of CTs related to cold conditions. Extreme mortality occurs when CTs associated with high NO2 levels join persistent low temperatures. This phenomenon may impact multiple provinces simultaneously or within a short timeframe, suggesting that early warning systems should consider these events to alert vulnerable populations and prevent nationwide high mortality rates.
- Open Access
- 15 June 2026
- Published by Copernicus GmbH in Geoscientific Model Development
- Vol. 19 (11) , 5139-5154
A local terrain smoothing approach for stabilizing microscale and high-resolution mesoscale simulations: a case study using FastEddy® (v3.0) and WRF (v4.6.0)
High-resolution simulations at both mesoscale and microscale increasingly rely on detailed terrain datasets, but terrain-following coordinate models can suffer from numerical instabilities in steep-slope regions. To address this issue, terrain smoothing is typically applied in numerical weather prediction models, though conventional global smoothing unnecessarily reduces resolution across the entire domain. This study presents a localized terrain smoothing approach designed to prevent numerical instabilities while preserving terrain details. Different smoothing strategies were tested for efficiency, computational cost, and terrain preservation. The final approach applies a Gaussian filter with adaptive standard deviation within a localized 3 × 3 grid, with a blending factor of 0.2, and treating all the steep-slope points simultaneously. Integrated into the NCAR's FastEddy® LES and WRF mesoscale community models, this technique effectively prevents terrain-driven instabilities in high-resolution simulations over complex terrain. The proposed local filtering method helps minimizing loss of terrain detail and avoiding the need for excessively strong numerical filtering during run time to stabilize the simulations. This method is computationally efficient, easy to implement, and adaptable to other models, providing a robust solution to improve numerical stability while maintaining high-resolution terrain features.
- 15 June 2026
- Published by Copernicus GmbH in Geoscientific Model Development
- Vol. 19 (11) , 5139-5154
Open AccessA local terrain smoothing approach for stabilizing microscale and high-resolution mesoscale simulations: a case study using FastEddy® (v3.0) and WRF (v4.6.0)
High-resolution simulations at both mesoscale and microscale increasingly rely on detailed terrain datasets, but terrain-following coordinate models can suffer from numerical instabilities in steep-slope regions. To address this issue, terrain smoothing is typically applied in numerical weather prediction models, though conventional global smoothing unnecessarily reduces resolution across the entire domain. This study presents a localized terrain smoothing approach designed to prevent numerical instabilities while preserving terrain details. Different smoothing strategies were tested for efficiency, computational cost, and terrain preservation. The final approach applies a Gaussian filter with adaptive standard deviation within a localized 3 × 3 grid, with a blending factor of 0.2, and treating all the steep-slope points simultaneously. Integrated into the NCAR's FastEddy® LES and WRF mesoscale community models, this technique effectively prevents terrain-driven instabilities in high-resolution simulations over complex terrain. The proposed local filtering method helps minimizing loss of terrain detail and avoiding the need for excessively strong numerical filtering during run time to stabilize the simulations. This method is computationally efficient, easy to implement, and adaptable to other models, providing a robust solution to improve numerical stability while maintaining high-resolution terrain features.
- Open Access
- 11 May 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-33
Comment on egusphere-2026-2127
Mineral dust is a major atmospheric aerosol influencing climate, air quality, and human health through radiative and microphysical processes. The Iberian Peninsula is frequently affected by North African dust intrusions, leading to episodic PM10 exceedances that challenge air quality forecasting. However, accurate representation of dust emissions remains limited by uncertainties in soil erodibility, land surface properties, and meteorological forcing. This study evaluates the impact of two high-resolution soil erodibility datasets on dust simulations using WRF-Chem with the GOCART scheme. The first dataset, EROD-HR, integrates fine-resolution topography (GMTED2010) to improve dust source representation at 0.0625 ° (~5 km) globally and 1 km over the Iberian Peninsula. The second dataset, SOILHD, further refines dust source characterization by incorporating high-resolution soil texture (sand, silt, clay fractions) and removing misclassified bare soil areas, reaching 1 km global resolution. Both datasets aim to better capture spatial heterogeneity of dust sources in semi-arid environments. Simulations are conducted for five dust episodes between 2022 and 2025, covering local and long-range transport conditions. Model performance is evaluated against PM10 observations from the SINQLAIR network in the Region of Murcia. Results show improved representation of dust emissions, with better agreement in magnitude and timing of PM10 peaks at inland stations. Improvements are more limited at coastal and anthropogenically influenced sites, although statistical metrics (correlation, bias, RMSE) indicate consistent gains. Overall, high-resolution erodibility datasets enhance WRF-Chem dust simulations by reducing biases and improving variability representation, highlighting the importance of detailed land-surface information for regional dust forecasting systems.
- 11 May 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-33
Open AccessComment on egusphere-2026-2127
Mineral dust is a major atmospheric aerosol influencing climate, air quality, and human health through radiative and microphysical processes. The Iberian Peninsula is frequently affected by North African dust intrusions, leading to episodic PM10 exceedances that challenge air quality forecasting. However, accurate representation of dust emissions remains limited by uncertainties in soil erodibility, land surface properties, and meteorological forcing. This study evaluates the impact of two high-resolution soil erodibility datasets on dust simulations using WRF-Chem with the GOCART scheme. The first dataset, EROD-HR, integrates fine-resolution topography (GMTED2010) to improve dust source representation at 0.0625 ° (~5 km) globally and 1 km over the Iberian Peninsula. The second dataset, SOILHD, further refines dust source characterization by incorporating high-resolution soil texture (sand, silt, clay fractions) and removing misclassified bare soil areas, reaching 1 km global resolution. Both datasets aim to better capture spatial heterogeneity of dust sources in semi-arid environments. Simulations are conducted for five dust episodes between 2022 and 2025, covering local and long-range transport conditions. Model performance is evaluated against PM10 observations from the SINQLAIR network in the Region of Murcia. Results show improved representation of dust emissions, with better agreement in magnitude and timing of PM10 peaks at inland stations. Improvements are more limited at coastal and anthropogenically influenced sites, although statistical metrics (correlation, bias, RMSE) indicate consistent gains. Overall, high-resolution erodibility datasets enhance WRF-Chem dust simulations by reducing biases and improving variability representation, highlighting the importance of detailed land-surface information for regional dust forecasting systems.
- Open Access
- 8 May 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-33
Comment on egusphere-2026-2127
Mineral dust is a major atmospheric aerosol influencing climate, air quality, and human health through radiative and microphysical processes. The Iberian Peninsula is frequently affected by North African dust intrusions, leading to episodic PM10 exceedances that challenge air quality forecasting. However, accurate representation of dust emissions remains limited by uncertainties in soil erodibility, land surface properties, and meteorological forcing. This study evaluates the impact of two high-resolution soil erodibility datasets on dust simulations using WRF-Chem with the GOCART scheme. The first dataset, EROD-HR, integrates fine-resolution topography (GMTED2010) to improve dust source representation at 0.0625 ° (~5 km) globally and 1 km over the Iberian Peninsula. The second dataset, SOILHD, further refines dust source characterization by incorporating high-resolution soil texture (sand, silt, clay fractions) and removing misclassified bare soil areas, reaching 1 km global resolution. Both datasets aim to better capture spatial heterogeneity of dust sources in semi-arid environments. Simulations are conducted for five dust episodes between 2022 and 2025, covering local and long-range transport conditions. Model performance is evaluated against PM10 observations from the SINQLAIR network in the Region of Murcia. Results show improved representation of dust emissions, with better agreement in magnitude and timing of PM10 peaks at inland stations. Improvements are more limited at coastal and anthropogenically influenced sites, although statistical metrics (correlation, bias, RMSE) indicate consistent gains. Overall, high-resolution erodibility datasets enhance WRF-Chem dust simulations by reducing biases and improving variability representation, highlighting the importance of detailed land-surface information for regional dust forecasting systems.
- 8 May 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-33
Open AccessComment on egusphere-2026-2127
Mineral dust is a major atmospheric aerosol influencing climate, air quality, and human health through radiative and microphysical processes. The Iberian Peninsula is frequently affected by North African dust intrusions, leading to episodic PM10 exceedances that challenge air quality forecasting. However, accurate representation of dust emissions remains limited by uncertainties in soil erodibility, land surface properties, and meteorological forcing. This study evaluates the impact of two high-resolution soil erodibility datasets on dust simulations using WRF-Chem with the GOCART scheme. The first dataset, EROD-HR, integrates fine-resolution topography (GMTED2010) to improve dust source representation at 0.0625 ° (~5 km) globally and 1 km over the Iberian Peninsula. The second dataset, SOILHD, further refines dust source characterization by incorporating high-resolution soil texture (sand, silt, clay fractions) and removing misclassified bare soil areas, reaching 1 km global resolution. Both datasets aim to better capture spatial heterogeneity of dust sources in semi-arid environments. Simulations are conducted for five dust episodes between 2022 and 2025, covering local and long-range transport conditions. Model performance is evaluated against PM10 observations from the SINQLAIR network in the Region of Murcia. Results show improved representation of dust emissions, with better agreement in magnitude and timing of PM10 peaks at inland stations. Improvements are more limited at coastal and anthropogenically influenced sites, although statistical metrics (correlation, bias, RMSE) indicate consistent gains. Overall, high-resolution erodibility datasets enhance WRF-Chem dust simulations by reducing biases and improving variability representation, highlighting the importance of detailed land-surface information for regional dust forecasting systems.
- Open Access
- 22 April 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-33
Impact of high-resolution soil erodibility datasets on dust simulations in WRF-Chem with the GOCART scheme
Mineral dust is a major atmospheric aerosol influencing climate, air quality, and human health through radiative and microphysical processes. The Iberian Peninsula is frequently affected by North African dust intrusions, leading to episodic PM10 exceedances that challenge air quality forecasting. However, accurate representation of dust emissions remains limited by uncertainties in soil erodibility, land surface properties, and meteorological forcing. This study evaluates the impact of two high-resolution soil erodibility datasets on dust simulations using WRF-Chem with the GOCART scheme. The first dataset, EROD-HR, integrates fine-resolution topography (GMTED2010) to improve dust source representation at 0.0625 ° (~5 km) globally and 1 km over the Iberian Peninsula. The second dataset, SOILHD, further refines dust source characterization by incorporating high-resolution soil texture (sand, silt, clay fractions) and removing misclassified bare soil areas, reaching 1 km global resolution. Both datasets aim to better capture spatial heterogeneity of dust sources in semi-arid environments. Simulations are conducted for five dust episodes between 2022 and 2025, covering local and long-range transport conditions. Model performance is evaluated against PM10 observations from the SINQLAIR network in the Region of Murcia. Results show improved representation of dust emissions, with better agreement in magnitude and timing of PM10 peaks at inland stations. Improvements are more limited at coastal and anthropogenically influenced sites, although statistical metrics (correlation, bias, RMSE) indicate consistent gains. Overall, high-resolution erodibility datasets enhance WRF-Chem dust simulations by reducing biases and improving variability representation, highlighting the importance of detailed land-surface information for regional dust forecasting systems.
- 22 April 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-33
Open AccessImpact of high-resolution soil erodibility datasets on dust simulations in WRF-Chem with the GOCART scheme
Mineral dust is a major atmospheric aerosol influencing climate, air quality, and human health through radiative and microphysical processes. The Iberian Peninsula is frequently affected by North African dust intrusions, leading to episodic PM10 exceedances that challenge air quality forecasting. However, accurate representation of dust emissions remains limited by uncertainties in soil erodibility, land surface properties, and meteorological forcing. This study evaluates the impact of two high-resolution soil erodibility datasets on dust simulations using WRF-Chem with the GOCART scheme. The first dataset, EROD-HR, integrates fine-resolution topography (GMTED2010) to improve dust source representation at 0.0625 ° (~5 km) globally and 1 km over the Iberian Peninsula. The second dataset, SOILHD, further refines dust source characterization by incorporating high-resolution soil texture (sand, silt, clay fractions) and removing misclassified bare soil areas, reaching 1 km global resolution. Both datasets aim to better capture spatial heterogeneity of dust sources in semi-arid environments. Simulations are conducted for five dust episodes between 2022 and 2025, covering local and long-range transport conditions. Model performance is evaluated against PM10 observations from the SINQLAIR network in the Region of Murcia. Results show improved representation of dust emissions, with better agreement in magnitude and timing of PM10 peaks at inland stations. Improvements are more limited at coastal and anthropogenically influenced sites, although statistical metrics (correlation, bias, RMSE) indicate consistent gains. Overall, high-resolution erodibility datasets enhance WRF-Chem dust simulations by reducing biases and improving variability representation, highlighting the importance of detailed land-surface information for regional dust forecasting systems.
- Open Access
- 20 April 2026
- Published by Copernicus GmbH
- Vol. 2025, 1-23
Reply on RC2
High-resolution simulations at both mesoscale and microscale increasingly rely on detailed terrain datasets, but terrain-following coordinate models can suffer from numerical instabilities in steep-slope regions. To address this issue, terrain smoothing is typically applied in numerical weather prediction models, though conventional global smoothing unnecessarily reduces resolution across the entire domain. This study presents a localized terrain smoothing approach designed to prevent numerical instabilities while preserving terrain details. Different smoothing strategies were tested for efficiency, computational cost, and terrain preservation. The final approach applies a Gaussian filter with adaptive standard deviation within a localized 3×3 grid, with a blending factor of 0.2, and treating all the steep-slope points simultaneously. Integrated into the NCAR's FastEddy® LES and WRF mesoscale community models, this technique effectively prevents terrain-driven instabilities in high-resolution simulations over complex terrain. The proposed local filtering method helps minimizing loss of terrain detail and avoiding the need for excessively strong numerical filtering during run time to stabilize the simulations. This method is computationally efficient, easy to implement, and adaptable to other models, providing a robust solution to improve numerical stability while maintaining high-resolution terrain features.
- 20 April 2026
- Published by Copernicus GmbH
- Vol. 2025, 1-23
Open AccessReply on RC2
High-resolution simulations at both mesoscale and microscale increasingly rely on detailed terrain datasets, but terrain-following coordinate models can suffer from numerical instabilities in steep-slope regions. To address this issue, terrain smoothing is typically applied in numerical weather prediction models, though conventional global smoothing unnecessarily reduces resolution across the entire domain. This study presents a localized terrain smoothing approach designed to prevent numerical instabilities while preserving terrain details. Different smoothing strategies were tested for efficiency, computational cost, and terrain preservation. The final approach applies a Gaussian filter with adaptive standard deviation within a localized 3×3 grid, with a blending factor of 0.2, and treating all the steep-slope points simultaneously. Integrated into the NCAR's FastEddy® LES and WRF mesoscale community models, this technique effectively prevents terrain-driven instabilities in high-resolution simulations over complex terrain. The proposed local filtering method helps minimizing loss of terrain detail and avoiding the need for excessively strong numerical filtering during run time to stabilize the simulations. This method is computationally efficient, easy to implement, and adaptable to other models, providing a robust solution to improve numerical stability while maintaining high-resolution terrain features.
- Open Access
- 31 March 2026
- Published by Copernicus GmbH
- Vol. 2025, 1-23
Comment on egusphere-2025-3744
High-resolution simulations at both mesoscale and microscale increasingly rely on detailed terrain datasets, but terrain-following coordinate models can suffer from numerical instabilities in steep-slope regions. To address this issue, terrain smoothing is typically applied in numerical weather prediction models, though conventional global smoothing unnecessarily reduces resolution across the entire domain. This study presents a localized terrain smoothing approach designed to prevent numerical instabilities while preserving terrain details. Different smoothing strategies were tested for efficiency, computational cost, and terrain preservation. The final approach applies a Gaussian filter with adaptive standard deviation within a localized 3×3 grid, with a blending factor of 0.2, and treating all the steep-slope points simultaneously. Integrated into the NCAR's FastEddy® LES and WRF mesoscale community models, this technique effectively prevents terrain-driven instabilities in high-resolution simulations over complex terrain. The proposed local filtering method helps minimizing loss of terrain detail and avoiding the need for excessively strong numerical filtering during run time to stabilize the simulations. This method is computationally efficient, easy to implement, and adaptable to other models, providing a robust solution to improve numerical stability while maintaining high-resolution terrain features.
- 31 March 2026
- Published by Copernicus GmbH
- Vol. 2025, 1-23
Open AccessComment on egusphere-2025-3744
High-resolution simulations at both mesoscale and microscale increasingly rely on detailed terrain datasets, but terrain-following coordinate models can suffer from numerical instabilities in steep-slope regions. To address this issue, terrain smoothing is typically applied in numerical weather prediction models, though conventional global smoothing unnecessarily reduces resolution across the entire domain. This study presents a localized terrain smoothing approach designed to prevent numerical instabilities while preserving terrain details. Different smoothing strategies were tested for efficiency, computational cost, and terrain preservation. The final approach applies a Gaussian filter with adaptive standard deviation within a localized 3×3 grid, with a blending factor of 0.2, and treating all the steep-slope points simultaneously. Integrated into the NCAR's FastEddy® LES and WRF mesoscale community models, this technique effectively prevents terrain-driven instabilities in high-resolution simulations over complex terrain. The proposed local filtering method helps minimizing loss of terrain detail and avoiding the need for excessively strong numerical filtering during run time to stabilize the simulations. This method is computationally efficient, easy to implement, and adaptable to other models, providing a robust solution to improve numerical stability while maintaining high-resolution terrain features.