Yijun Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yijun Wang has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Clinton Phillips Conrad
University of Oslo
4 shared publications - Ágnes Király
Centre for Earth Evolution and Dynamics University of Oslo Oslo Norway
3 shared publications Lars Hansen
Department of Earth and Environmental Sciences, University of Minnesota, Minneapolis, MN, USA
2 shared publications- Menno Fraters
Institut für Erdwissenschaften, Universität Graz, Universitätsplatz 2, 8010 Graz, Austria
2 shared publications - Valérie Maupin
PHAB—Centre for Planetary Habitability, University of Oslo , 0315 Oslo
2 shared publications Agnes Király
Centre for Planetary Habitability (PHAB), University of Oslo, Oslo, Norway
1 shared publication
Latest Publications
- Open Access
- 6 January 2026
- Published by California Digital Library (CDL) in Geodynamica
- Vol. 1 (1)
CPO2Hill: An Efficient Parametrisation to Infer Anisotropic Viscous Behaviour Directly from Olivine Texture Parameters
Anisotropic viscosity is likely prevalent within the upper mantle, but is usually disregarded in geodynamics models. On a crystal scale, olivine’s intrinsic properties are such that dislocation creep occurs over an order of magnitude more easily along olivine’s [100] symmetry axis than along its [001] axis. However, deforming olivine aggregates generate crystallographic preferred orientations (CPO) with their own macroscopically effective anisotropic viscosities that have proven difficult to estimate from the microscopic anisotropies of individual olivine crystals. Here we present a simple method to derive anisotropic viscosity parameters directly from the CPO mean orientation tensors. To calibrate the method, we created a large database of textures likely to occur in geodynamic simulations. We tested our method within numerical simulations of simple shear with both constant and varying shear directions. Finally, we integrated our method into the geodynamic code ASPECT, where it can be used to explore the geodynamic importance of anisotropic viscosity.
- 6 January 2026
- Published by California Digital Library (CDL) in Geodynamica
- Vol. 1 (1)
Open AccessCPO2Hill: An Efficient Parametrisation to Infer Anisotropic Viscous Behaviour Directly from Olivine Texture Parameters
Anisotropic viscosity is likely prevalent within the upper mantle, but is usually disregarded in geodynamics models. On a crystal scale, olivine’s intrinsic properties are such that dislocation creep occurs over an order of magnitude more easily along olivine’s [100] symmetry axis than along its [001] axis. However, deforming olivine aggregates generate crystallographic preferred orientations (CPO) with their own macroscopically effective anisotropic viscosities that have proven difficult to estimate from the microscopic anisotropies of individual olivine crystals. Here we present a simple method to derive anisotropic viscosity parameters directly from the CPO mean orientation tensors. To calibrate the method, we created a large database of textures likely to occur in geodynamic simulations. We tested our method within numerical simulations of simple shear with both constant and varying shear directions. Finally, we integrated our method into the geodynamic code ASPECT, where it can be used to explore the geodynamic importance of anisotropic viscosity.
- Open Access
- 7 July 2025
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 26 (7)
Mantle Flow and Anisotropy in Subduction Zones: Modeling and Clustering of Olivine Textures
The mantle near Earth's subduction zones endures intense deformation that generates anisotropic rock textures. These textures can be observed seismically and modeled geodynamically, but the complexity of this deformation makes analyses of these textures difficult. In this study, we apply time‐series clustering analysis to tracers within subduction models, allowing for the identification of regions in the subduction zone with common deformation histories and olivine crystallographic‐preferred orientation development. We compare olivine texture evolution predicted using different methods in both retreating and stationary‐trench settings. Our results reveal distinct variations in olivine texture, indicating that both seismic and viscous anisotropy can exhibit substantial heterogeneity within the mantle wedge, sub‐slab, and subducting plate regions. For retreating trenches, olivine textures are strongest in the mid‐depth mantle wedge region about 200 km away from the trench between 100 and 300 km depth. Our study shows that trench‐normal olivine a‐axis orientations dominate in the center of subduction zones. Toroidal flow around slab edges generates a mix of trench‐normal, trench‐parallel, and oblique fast seismic directions. Textures and anisotropy are stronger for the retreating trench model than for the stationary trench model since more deformation has been accumulated due to trench motion. These findings provide insights for interpreting seismic anisotropy in subduction zones and highlight the importance of considering texture heterogeneity, as characterized by clustering algorithms, when analyzing both geodynamic models and seismic observations of subduction zones.
- 7 July 2025
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 26 (7)
Open AccessMantle Flow and Anisotropy in Subduction Zones: Modeling and Clustering of Olivine Textures
The mantle near Earth's subduction zones endures intense deformation that generates anisotropic rock textures. These textures can be observed seismically and modeled geodynamically, but the complexity of this deformation makes analyses of these textures difficult. In this study, we apply time‐series clustering analysis to tracers within subduction models, allowing for the identification of regions in the subduction zone with common deformation histories and olivine crystallographic‐preferred orientation development. We compare olivine texture evolution predicted using different methods in both retreating and stationary‐trench settings. Our results reveal distinct variations in olivine texture, indicating that both seismic and viscous anisotropy can exhibit substantial heterogeneity within the mantle wedge, sub‐slab, and subducting plate regions. For retreating trenches, olivine textures are strongest in the mid‐depth mantle wedge region about 200 km away from the trench between 100 and 300 km depth. Our study shows that trench‐normal olivine a‐axis orientations dominate in the center of subduction zones. Toroidal flow around slab edges generates a mix of trench‐normal, trench‐parallel, and oblique fast seismic directions. Textures and anisotropy are stronger for the retreating trench model than for the stationary trench model since more deformation has been accumulated due to trench motion. These findings provide insights for interpreting seismic anisotropy in subduction zones and highlight the importance of considering texture heterogeneity, as characterized by clustering algorithms, when analyzing both geodynamic models and seismic observations of subduction zones.
- Open Access
- 15 March 2025
- Published by Copernicus GmbH
Subduction dynamics and mantle anisotropy: modeling and clustering of olivine textures
The mantle near Earth's subduction zones experiences significant deformation, forming anisotropic rock textures. These textures can be detected using seismic methods and simulated in geodynamic models. This study employs time-series clustering to examine tracers in subduction models, identifying regions with similar deformation histories, olivine crystallographic-preferred orientation (CPO) development, and CPO-induced anisotropic viscosity. We compare the evolution of olivine textures predicted by various numerical methods (e.g. D-Rex, MDM, and MDM+AV) for both retreating and stationary trench subduction settings.Our modeling shows notable variations in olivine texture around the slab and as a function of subduction dynamics. These variations, which are illuminated by the clustering analysis, show that texture, seismic, and viscous anisotropy can vary greatly within the mantle wedge, sub-slab, and subducting plate regions of the upper mantle. In the retreating-trench model, the strongest textures are observed in the mid-depth mantle wedge region and beneath the slab at the 660 km transition zone. Trench-normal olivine a-axis orientations are predominant in the center of subduction zones, while toroidal flow around slab edges produces a mix of trench-normal, trench-parallel, and oblique fast seismic directions. On the other hand, in the stationary-trench model, the trench-normal signal in front of the slab is weaker while there are stronger trench-normal signals behind the slab at shallow depths between 100 and 300 km. At the edge of the slab, weak toroidal flow produces trench-oblique orientations while trench-parallel and trench-normal orientations are missing. In general, the retreating trench model exhibits stronger textures and anisotropy due to increased deformation from trench motion.These results provide valuable insights into seismic anisotropy in subduction zones and underscore the importance of considering texture heterogeneity when interpreting geodynamic models and seismic data. The use of time-series clustering algorithms highlights the intricate pattern of evolution and the relationship between deformation history, CPO, and CPO-induced viscous anisotropy occurring within subduction zones.
- 15 March 2025
- Published by Copernicus GmbH
Open AccessSubduction dynamics and mantle anisotropy: modeling and clustering of olivine textures
The mantle near Earth's subduction zones experiences significant deformation, forming anisotropic rock textures. These textures can be detected using seismic methods and simulated in geodynamic models. This study employs time-series clustering to examine tracers in subduction models, identifying regions with similar deformation histories, olivine crystallographic-preferred orientation (CPO) development, and CPO-induced anisotropic viscosity. We compare the evolution of olivine textures predicted by various numerical methods (e.g. D-Rex, MDM, and MDM+AV) for both retreating and stationary trench subduction settings.Our modeling shows notable variations in olivine texture around the slab and as a function of subduction dynamics. These variations, which are illuminated by the clustering analysis, show that texture, seismic, and viscous anisotropy can vary greatly within the mantle wedge, sub-slab, and subducting plate regions of the upper mantle. In the retreating-trench model, the strongest textures are observed in the mid-depth mantle wedge region and beneath the slab at the 660 km transition zone. Trench-normal olivine a-axis orientations are predominant in the center of subduction zones, while toroidal flow around slab edges produces a mix of trench-normal, trench-parallel, and oblique fast seismic directions. On the other hand, in the stationary-trench model, the trench-normal signal in front of the slab is weaker while there are stronger trench-normal signals behind the slab at shallow depths between 100 and 300 km. At the edge of the slab, weak toroidal flow produces trench-oblique orientations while trench-parallel and trench-normal orientations are missing. In general, the retreating trench model exhibits stronger textures and anisotropy due to increased deformation from trench motion.These results provide valuable insights into seismic anisotropy in subduction zones and underscore the importance of considering texture heterogeneity when interpreting geodynamic models and seismic data. The use of time-series clustering algorithms highlights the intricate pattern of evolution and the relationship between deformation history, CPO, and CPO-induced viscous anisotropy occurring within subduction zones.
- Open Access
- 4 September 2024
- Published by The Open Journal in Journal of Open Source Software
- Vol. 9 (101) , 6671
The Geodynamic World Builder: A planetary structure creator for the geosciences
Many Earth science applications require the discretization, parameterization, and/or visualization of complex geological features in a 3D geometry in global or regional settings. A prime example are geodynamic models that have to make assumptions about the Earth's thermal and chemical structure and the geometry of different features such as plates, subducted slabs, or mantle plumes. This structure is needed in instantaneous models, as model initial conditions, or to test different hypotheses and compare model predictions to observations. Other examples are the creation of an Earth velocity structure for seismic forward modeling and hypothesis-testing, or the visualization of tectonic features in structural geology. The Geodynamic World Builder (GWB) has been designed to make the creation of complex parameterized models significantly easier. It can also be used to design simple synthetic models and it supports the use of several types of datasets to set up models. Besides setting up initial conditions for geodynamic models, the GWB can also visualize complex 3D geologic, tectonic, and geodynamic settings.
- 4 September 2024
- Published by The Open Journal in Journal of Open Source Software
- Vol. 9 (101) , 6671
Open AccessThe Geodynamic World Builder: A planetary structure creator for the geosciences
Many Earth science applications require the discretization, parameterization, and/or visualization of complex geological features in a 3D geometry in global or regional settings. A prime example are geodynamic models that have to make assumptions about the Earth's thermal and chemical structure and the geometry of different features such as plates, subducted slabs, or mantle plumes. This structure is needed in instantaneous models, as model initial conditions, or to test different hypotheses and compare model predictions to observations. Other examples are the creation of an Earth velocity structure for seismic forward modeling and hypothesis-testing, or the visualization of tectonic features in structural geology. The Geodynamic World Builder (GWB) has been designed to make the creation of complex parameterized models significantly easier. It can also be used to design simple synthetic models and it supports the use of several types of datasets to set up models. Besides setting up initial conditions for geodynamic models, the GWB can also visualize complex 3D geologic, tectonic, and geodynamic settings.
- Open Access
The Importance of Anisotropic Viscosity in Numerical Models, for Olivine Textures in Shear and Subduction Deformations
Olivine lattice preferred orientation (LPO), or texture, forms in relation to deformation mechanisms such as dislocation creep and can be observed in the upper mantle as seismic anisotropy. Olivine is also mechanically anisotropic, meaning that it responds to stresses differently depending on the direction of the stress. Understanding the interplay between anisotropic viscosity (AV) and LPO, and their role in deformation, is necessary for relating seismic anisotropy to mantle flow patterns. In this study, we employ three methods to predict olivine texture (D-Rex, MDM, and MDM+AV) in a shear box model and a subduction model. D-Rex and MDM are two representative texture development methods that have been compared before, and our results are in line with previous studies showing that textures computed by D-Rex develop faster and are stronger and more point-like than textures calculated with MDM. MDM+AV uses the same isotropic mantle stresses and particle paths as D-Rex and MDM but includes the effect of AV for texture predictions. MDM+AV predicts a texture similar to MDM with a distinct girdle-like orientation for simple shear deformation or at low strain in the subduction model. At larger strains, MDM+AV’s textures are more point-like and stronger compared to the other two methods. The effective viscosity for MDM+AV drops by up to 60% in a shear box model and can be either strengthened or weakened relative to isotropic viscosity for different regions of the subduction model experiencing different patterns of deformation. Our results emphasize the significant role of AV in olivine texture development, which could substantially affect geodynamic processes in the upper mantle.
Open AccessThe Importance of Anisotropic Viscosity in Numerical Models, for Olivine Textures in Shear and Subduction Deformations
Olivine lattice preferred orientation (LPO), or texture, forms in relation to deformation mechanisms such as dislocation creep and can be observed in the upper mantle as seismic anisotropy. Olivine is also mechanically anisotropic, meaning that it responds to stresses differently depending on the direction of the stress. Understanding the interplay between anisotropic viscosity (AV) and LPO, and their role in deformation, is necessary for relating seismic anisotropy to mantle flow patterns. In this study, we employ three methods to predict olivine texture (D-Rex, MDM, and MDM+AV) in a shear box model and a subduction model. D-Rex and MDM are two representative texture development methods that have been compared before, and our results are in line with previous studies showing that textures computed by D-Rex develop faster and are stronger and more point-like than textures calculated with MDM. MDM+AV uses the same isotropic mantle stresses and particle paths as D-Rex and MDM but includes the effect of AV for texture predictions. MDM+AV predicts a texture similar to MDM with a distinct girdle-like orientation for simple shear deformation or at low strain in the subduction model. At larger strains, MDM+AV’s textures are more point-like and stronger compared to the other two methods. The effective viscosity for MDM+AV drops by up to 60% in a shear box model and can be either strengthened or weakened relative to isotropic viscosity for different regions of the subduction model experiencing different patterns of deformation. Our results emphasize the significant role of AV in olivine texture development, which could substantially affect geodynamic processes in the upper mantle.
- Open Access
- 15 May 2023
- Published by Copernicus GmbH
Effect of olivine anisotropic viscosity in advancing and retreating subduction settings
Lattice preferred orientation (LPO) of olivine crystals occurs due to deformation in the mantle. Different parts of the upper mantle can undergo a large variety of deformation paths. During simple processes, such as simple shearing below oceans due to the movement of tectonic plates, the LPO will reflect the direction of the movement of tectonic plates. On the other hand, in areas, such as around subduction zones, the mantle undergoes more complex deformation paths, resulting in a less easily predictable LPO. Seismic anisotropy has been used as a proxy for mantle flows and the LPO formed in the mantle. To interpret the seismic anisotropy observations more accurately, we need to understand how LPO forms in different regions of subduction.LPO has been implemented in many numerical modelling tools to predict seismic anisotropy, which places constraints on mantle dynamics. However, a few recent studies have linked olivine texture development to viscous anisotropy, resulted from the summed effect of individual crystals that are deforming anisotropically. Anisotropic viscosity can affect deformation and in turn the resulting LPO. To study the effect of anisotropic viscosity (AV) and LPO evolution in geodynamics processes, it is important to know the role of AV on LPO and the differences between the numerical methods that calculate them.We choose three methods of olivine texture development to examine in this study. D-Rex is a polycrystal LPO model that is relatively balanced in computational efficiency and accuracy. From previous studies, D-Rex has been shown to produce faster texture development and stronger texture compared to other methods, including our second choice, the modified director method (MDM). The MDM parameterizes the olivine LPO formation as relative rotation rates along the slip systems that participate in the rotation of olivine grains due to finite deformation. We also couple the MDM with a micromechanical model for olivine AV (which makes our third choice MDM+AV), to allow the anisotropic texture to modify the viscosity and in turn affect the formation of LPO.Here we compare the LPO evolution under subduction settings with a slowly advancing trench and a retreating trench, with and without the effect of AV. Since the mantle flow pattern in subduction zones is not homogeneous, different particles experience a variety of deformation paths. We place 60 particles in each subduction model around the slab to track the deformation and resulting olivine texture. We compute olivine texture using the above-mentioned three different methods (D-Rex, MDM, MDM+AV). With the particles, we can identify characteristic textures developed in key regions such as the mantle wedge, sub-slab area, and lateral slab edge. We then run a statistical analysis on the texture parameter and anisotropic properties of the particles from both retreating and advancing subduction models, to study where anisotropic viscosity has the largest effect on the mantle flow. We expect AV to have a larger effect in a retreating slab setting since the mantle flows feeding material to the sub-slab region is more intensive.
- 15 May 2023
- Published by Copernicus GmbH
Open AccessEffect of olivine anisotropic viscosity in advancing and retreating subduction settings
Lattice preferred orientation (LPO) of olivine crystals occurs due to deformation in the mantle. Different parts of the upper mantle can undergo a large variety of deformation paths. During simple processes, such as simple shearing below oceans due to the movement of tectonic plates, the LPO will reflect the direction of the movement of tectonic plates. On the other hand, in areas, such as around subduction zones, the mantle undergoes more complex deformation paths, resulting in a less easily predictable LPO. Seismic anisotropy has been used as a proxy for mantle flows and the LPO formed in the mantle. To interpret the seismic anisotropy observations more accurately, we need to understand how LPO forms in different regions of subduction.LPO has been implemented in many numerical modelling tools to predict seismic anisotropy, which places constraints on mantle dynamics. However, a few recent studies have linked olivine texture development to viscous anisotropy, resulted from the summed effect of individual crystals that are deforming anisotropically. Anisotropic viscosity can affect deformation and in turn the resulting LPO. To study the effect of anisotropic viscosity (AV) and LPO evolution in geodynamics processes, it is important to know the role of AV on LPO and the differences between the numerical methods that calculate them.We choose three methods of olivine texture development to examine in this study. D-Rex is a polycrystal LPO model that is relatively balanced in computational efficiency and accuracy. From previous studies, D-Rex has been shown to produce faster texture development and stronger texture compared to other methods, including our second choice, the modified director method (MDM). The MDM parameterizes the olivine LPO formation as relative rotation rates along the slip systems that participate in the rotation of olivine grains due to finite deformation. We also couple the MDM with a micromechanical model for olivine AV (which makes our third choice MDM+AV), to allow the anisotropic texture to modify the viscosity and in turn affect the formation of LPO.Here we compare the LPO evolution under subduction settings with a slowly advancing trench and a retreating trench, with and without the effect of AV. Since the mantle flow pattern in subduction zones is not homogeneous, different particles experience a variety of deformation paths. We place 60 particles in each subduction model around the slab to track the deformation and resulting olivine texture. We compute olivine texture using the above-mentioned three different methods (D-Rex, MDM, MDM+AV). With the particles, we can identify characteristic textures developed in key regions such as the mantle wedge, sub-slab area, and lateral slab edge. We then run a statistical analysis on the texture parameter and anisotropic properties of the particles from both retreating and advancing subduction models, to study where anisotropic viscosity has the largest effect on the mantle flow. We expect AV to have a larger effect in a retreating slab setting since the mantle flows feeding material to the sub-slab region is more intensive.