Ayman Alfaleh

The ripstop fabrics are highly appreciated in the military and defence workwear. One of the qualities requirements in defence clothing is quick evaporation. The effect of the wearer’s walking speed on textile fabric evaporation during capillary rise was investigated in this study. To achieve this, two steps were taken: modelling the capillary considering evaporation and estimating the coefficient of evaporation using a program designed for image analysis. The walking speed was simulated by varying the air velocity from 0 m/s (non-walking) to 1 m/s (walking) and 2 m/s (running). Results conclusively demonstrated that the evaporation coefficient is directly relational to the water vapour in the surrounding air layer and is highly dependent on the aeration rate. Furthermore, liquid equilibrium front level and capillary diffusion were found to be inversely proportional to the walking speed. The walking speeds affected the indirect water amount on the fabrics and it was more difficult to evaporate liquid from the 100% cotton compared to 65% polyester/35% cotton/

Thermo-physiological comfort refers to the heat and moisture transport properties of clothing and how the clothing helps maintain the body's heat balance during various activities. To maintain the thermoregulation of the body, the resulting sweating should be absorbed by wicking fabrics close to the skin and evaporated to the ambient air. In this study, a mathematical model was developed considering evaporation during the capillary rise, based on the geometric configuration of a jersey-knitted fabric and taking evaporation into account. This model was used to calculate the evaporation coefficient. Based on the activities of the worker, sweat diffusion is controlled by capillary diffusion and moisture evaporation. The effect of air velocities of 0 m/s, 1 m/s, and 2 m/s, representing non-walking, walking, and running activities of a worker, respectively, was studied during capillary diffusion. The experiments were conducted at different relative humidities. The results show that the evaporation coefficient depends on the worker’s activities and the relative humidity ratio.

The physiological systems and biological applications that have arisen during the past 15 years depend heavily on the microscale and nanoscale fluxes. Microchannels have been utilized to develop new diagnostic assays, examine cell adhesion and molecular transport, and replicate the fluid flow microenvironment of the circulatory system. The various uses of MHD boundary flow in engineering and technology are extensive, ranging from MHD power generators and the polymer industry to MHD flow meters and pumps and the spinning of filaments. In this investigation, the (Magnetohydrodynamic) MHD flow of Prandtl nanofluid is investigated along with mixed convection, energy activation, microorganism, and chemical reaction. The flow model is considered through partial differential equations in dimensionless form which is then integrated numerically via considering the Bvp4c technique. The outcome is numerous emerging physical parameters over velocity profile, temperature, mass concentration, and microorganism with the separate pertinent quantities such as the Prandtl fluid parameter, elastic fluid parameter, magnetic field, mixed convection parameter, activation energy, chemical reaction, Brownian motion, thermophoretic force, Prandtl number, and Schmidt number. The friction factor, rate of heat transfer and Sherwood number, and density of microbes are revealed numerically and graphically. The outcomes indicate that the Prandtl fluid parameter and elastic fluid parameter tend to enhance the velocity profile. It is also noted that the Prandtl fluid parameter depreciates the thermal rate with the addition of the concentration profile while the opposite trend is recorded for activation energy. Obtained numerical outcomes are correspondingly compared with the current statistics in limiting cases and a close match is obtained.