Anmol Mahendra
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Anmol Mahendra has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- John Kennedy
National Isotope Centre, Earth Sciences New Zealand Lower Hutt New Zealand
2 shared publications Angeline Little Flower
1 shared publicationAtif Islam
Robinson Research Institute, Victoria University of Wellington, Wellington, New Zealand
1 shared publication- Atif Islam
Robinson Research Institute, Victoria University of Wellington, Wellington 6140, New Zealand
1 shared publication Dilip S.
Department of Physics, Islamic Azad University, Ahwaz Branch, Ahwaz
1 shared publicationFarid Jamali
Department of Physics, Islamic Azad University, Ahwaz Branch, Ahwaz
1 shared publication
Latest Publications
- Open Access
- 16 May 2024
- Published by Victoria University of Wellington Library
Defect Engineering Of Perpendicular Magnetic Anisotropy In Cobalt-Based Thin Films
Magnetic sensors have widespread applications in industrial, security, space, and biomedical fields, offering precise measurement of magnetic fields using principles like the Hall effect and magnetoresistance. Magnetic tunnel junctions (MTJs) have played a pivotal role in advancing magnetic sensing through tunnelling magnetoresistance (TMR), contributing to spintronic devices, memory systems, and magnetic sensors. The magnetic anisotropy of the reference ferromagnetic layer in MTJ sensors is a critical factor, influencing sensitivity, accuracy, and sensing direction. Perpendicular magnetic anisotropy (PMA) is particularly advantageous for detecting magnetic fields perpendicular to the sensor plane, opening possibilities in non-destructive testing and magnetic read heads. However, conventional sensors are restricted to fixed axes, hindering their ability to measure fields in three dimensions. To address this limitation, this thesis proposes a magnetic sensor with a tuneable sensing axis, enabling comprehensive field detection in all axes. As part of this exploration, the thesis investigates ion irradiation as a post-processing technique to modify the PMA of ferromagnetic layers, offering versatility for various applications.Cobalt-based materials, especially CoFeB, are well-known for their suitability in MTJs due to high TMR with MgO and PMA at low thicknesses. Half-metallic Heusler alloys, like Co2MnGa, have gained attention for their theoretically infinite TMR, high spin polarization, and high PMA. This research assesses the effects of ion irradiation on ultra-thin Co2MnGa and CoFeB stacks with PMA.Ion irradiation is a versatile tool for precisely tailoring magnetic stack properties with uniformity and reproducibility. This thesis investigates the impact of 30 keV Ar and Ne ion irradiation on CoFeB and Co2MnGa thin film stacks at low fluences (1 × 1013 to 1 × 1015 ion·cm−2), introducing displacement per atom (DPA) as a predictive parameter for ion-induced magnetic property changes. Results show a consistent reduction in PMA for both materials in half-MTJ stacks after irradiation, which is linked to intermixing of the magnetic layer with its adjacent MgO and heavy metal layers. Ar irradiation has a more pronounced effect due to higher DPA, while Ne irradiation has a milder impact. Co2MnGa displays relatively more resilience to irradiation due to reduced intermixing with adjacent layers, compared to CoFeB. Furthermore, the thesis explores the dynamic tuning of magnetic properties through ionic liquid gating, allowing anisotropy and coercivity manipulation via voltage control. It also delves into ion irradiation's potential to enhance the magneto-ionic effect. Lastly, a novel magnetic sensor design is introduced featuring a tuneable sensing axis, enabling three-dimensional detection capabilities.
- 16 May 2024
- Published by Victoria University of Wellington Library
Open AccessDefect Engineering Of Perpendicular Magnetic Anisotropy In Cobalt-Based Thin Films
Magnetic sensors have widespread applications in industrial, security, space, and biomedical fields, offering precise measurement of magnetic fields using principles like the Hall effect and magnetoresistance. Magnetic tunnel junctions (MTJs) have played a pivotal role in advancing magnetic sensing through tunnelling magnetoresistance (TMR), contributing to spintronic devices, memory systems, and magnetic sensors. The magnetic anisotropy of the reference ferromagnetic layer in MTJ sensors is a critical factor, influencing sensitivity, accuracy, and sensing direction. Perpendicular magnetic anisotropy (PMA) is particularly advantageous for detecting magnetic fields perpendicular to the sensor plane, opening possibilities in non-destructive testing and magnetic read heads. However, conventional sensors are restricted to fixed axes, hindering their ability to measure fields in three dimensions. To address this limitation, this thesis proposes a magnetic sensor with a tuneable sensing axis, enabling comprehensive field detection in all axes. As part of this exploration, the thesis investigates ion irradiation as a post-processing technique to modify the PMA of ferromagnetic layers, offering versatility for various applications.Cobalt-based materials, especially CoFeB, are well-known for their suitability in MTJs due to high TMR with MgO and PMA at low thicknesses. Half-metallic Heusler alloys, like Co2MnGa, have gained attention for their theoretically infinite TMR, high spin polarization, and high PMA. This research assesses the effects of ion irradiation on ultra-thin Co2MnGa and CoFeB stacks with PMA.Ion irradiation is a versatile tool for precisely tailoring magnetic stack properties with uniformity and reproducibility. This thesis investigates the impact of 30 keV Ar and Ne ion irradiation on CoFeB and Co2MnGa thin film stacks at low fluences (1 × 1013 to 1 × 1015 ion·cm−2), introducing displacement per atom (DPA) as a predictive parameter for ion-induced magnetic property changes. Results show a consistent reduction in PMA for both materials in half-MTJ stacks after irradiation, which is linked to intermixing of the magnetic layer with its adjacent MgO and heavy metal layers. Ar irradiation has a more pronounced effect due to higher DPA, while Ne irradiation has a milder impact. Co2MnGa displays relatively more resilience to irradiation due to reduced intermixing with adjacent layers, compared to CoFeB. Furthermore, the thesis explores the dynamic tuning of magnetic properties through ionic liquid gating, allowing anisotropy and coercivity manipulation via voltage control. It also delves into ion irradiation's potential to enhance the magneto-ionic effect. Lastly, a novel magnetic sensor design is introduced featuring a tuneable sensing axis, enabling three-dimensional detection capabilities.
- 22 June 2023
- Published by Springer Nature in Applied Physics A
- Vol. 129 (7) , 1-10
Role of interface intermixing on perpendicular magnetic anisotropy of cobalt-iron-boron alloy
- 22 June 2023
- Published by Springer Nature in Applied Physics A
- Vol. 129 (7) , 1-10
Role of interface intermixing on perpendicular magnetic anisotropy of cobalt-iron-boron alloy
- Open Access
Shaping Perpendicular Magnetic Anisotropy of Co2MnGa Heusler Alloy Using Ion Irradiation for Magnetic Sensor Applications
Magnetic sensors are key elements in many industrial, security, military, and biomedical applications. Heusler alloys are promising materials for magnetic sensor applications due to their high spin polarization and tunable magnetic properties. The dynamic field range of magnetic sensors is strongly related to the perpendicular magnetic anisotropy (PMA). By tuning the PMA, it is possible to modify the sensing direction, sensitivity and even the accuracy of the magnetic sensors. Here, we report the tuning of PMA in a Co2MnGa Heusler alloy film via argon (Ar) ion irradiation. MgO/Co2MnGa/Pd films with an initial PMA were irradiated with 30 keV 40Ar+ ions with fluences (ions·cm−2) between 1 × 1013 and 1 × 1015 Ar·cm−2, which corresponds to displacement per atom values between 0.17 and 17, estimated from Monte-Carlo-based simulations. The magneto optical and magnetization results showed that the effective anisotropy energy (Keff) decreased from ~153 kJ·m−3 for the un-irradiated film to ~14 kJ·m−3 for the 1 × 1014 Ar·cm−2 irradiated film. The reduced Keff and PMA are attributed to ion-irradiation-induced interface intermixing that decreased the interfacial anisotropy. These results demonstrate that ion irradiation is a promising technique for shaping the PMA of Co2MnGa Heusler alloy for magnetic sensor applications.
Open AccessShaping Perpendicular Magnetic Anisotropy of Co2MnGa Heusler Alloy Using Ion Irradiation for Magnetic Sensor Applications
Magnetic sensors are key elements in many industrial, security, military, and biomedical applications. Heusler alloys are promising materials for magnetic sensor applications due to their high spin polarization and tunable magnetic properties. The dynamic field range of magnetic sensors is strongly related to the perpendicular magnetic anisotropy (PMA). By tuning the PMA, it is possible to modify the sensing direction, sensitivity and even the accuracy of the magnetic sensors. Here, we report the tuning of PMA in a Co2MnGa Heusler alloy film via argon (Ar) ion irradiation. MgO/Co2MnGa/Pd films with an initial PMA were irradiated with 30 keV 40Ar+ ions with fluences (ions·cm−2) between 1 × 1013 and 1 × 1015 Ar·cm−2, which corresponds to displacement per atom values between 0.17 and 17, estimated from Monte-Carlo-based simulations. The magneto optical and magnetization results showed that the effective anisotropy energy (Keff) decreased from ~153 kJ·m−3 for the un-irradiated film to ~14 kJ·m−3 for the 1 × 1014 Ar·cm−2 irradiated film. The reduced Keff and PMA are attributed to ion-irradiation-induced interface intermixing that decreased the interfacial anisotropy. These results demonstrate that ion irradiation is a promising technique for shaping the PMA of Co2MnGa Heusler alloy for magnetic sensor applications.
- 1 January 2021
- Published by Elsevier in Materials Today: Proceedings
- Vol. 36, 582-586
Fabrication of superparamagnetic permalloy nanostructures in ZnO matrix by ion beam sputtering
- 1 January 2021
- Published by Elsevier in Materials Today: Proceedings
- Vol. 36, 582-586
Fabrication of superparamagnetic permalloy nanostructures in ZnO matrix by ion beam sputtering
- 1 January 2020
- Published by Elsevier in Journal of Photochemistry and Photobiology A: Chemistry
- Vol. 386
Luminescence and nonlinear optical properties of Er3+- doped ZnWO4 nanostructures
- 1 January 2020
- Published by Elsevier in Journal of Photochemistry and Photobiology A: Chemistry
- Vol. 386
Luminescence and nonlinear optical properties of Er3+- doped ZnWO4 nanostructures
- Open Access
- 18 July 2011
- Published by IntechOpen
Field Emission from Nanowires
Authors: Dilip S. Joag1, Mahendra A. More1 and Farid Jamali Sheini
- 18 July 2011
- Published by IntechOpen
Open AccessField Emission from Nanowires
Authors: Dilip S. Joag1, Mahendra A. More1 and Farid Jamali Sheini