Siyuan Xie
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Siyuan Xie has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Chengwen Xing
School of Information and Electronics, Beijing Institute of Technology, Beijing, China
5 shared publications - Shiqi Gong
School of Information and Electronics, Beijing Institute of Technology, Beijing, China
5 shared publications - Heng Liu
School of Information and Electronics, Beijing Institute of Technology, Beijing, China
4 shared publications - Jianping An
Beijing Institute of Technology
2 shared publications - Tao Yu
Beijing Institute of Technology
2 shared publications Jinhui Fang
School of Information and Electronics, Beijing Institute of Technology, Beijing, China
1 shared publication
Latest Publications
- 4 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 25 (15361276) , 8228-8245
Energy Efficiency Optimization for Hybrid Active-Passive RIS Aided Communications: A Novel Dynamic Subarray-Based Architecture
Reconfigurable intelligent surface (RIS) has emerged as a promising technology for greatly enhancing communication performance of future wireless networks. To overcome the multiplicative fading effect of passive RIS and high energy consumption of active RIS, we propose a novel dynamic subarray-based hybrid active-passive RIS (HRIS) architecture by dividing all reflecting elements into multiple sub-RISs, each of which can flexibly switch between active and passive modes. Therefore, the proposed subarray-based HRIS is anticipated to achieve optimal system performance with minimal cost and energy consumption. In this paper, we aim to maximize the energy efficiency (EE) for the subarray-based HRIS assisted multi-user multiple-input single-output (MISO) system, where the transmit beamforming vectors at the base station (BS), the mode switching matrix, and the reflection matrices of active and passive sub-RISs are jointly optimized subject to individual user rate constraints. To tackle this intractable problem, we firstly explore the feasible region of the minimum rate threshold among all users, and then develop an efficient two-layer successive convex approximation (SCA) based iterative algorithm. Considering a simplified single-user scenario, we also derive some interesting insights into the optimal active-passive sub-RISs allocation for maximizing EE. It is revealed that for a small BS transmit power, deploying more active sub-RISs in the subarray-based HRIS is preferred to attain the maximum EE. Conversely, under a high BS transmit power and a small HRIS reflection power, more sub-RISs should be switched to the passive mode. Numerical simulation results verify the superior EE performance of the proposed dynamic subarray-based HRIS over the traditional active and passive RISs.
- 4 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 25 (15361276) , 8228-8245
Energy Efficiency Optimization for Hybrid Active-Passive RIS Aided Communications: A Novel Dynamic Subarray-Based Architecture
Reconfigurable intelligent surface (RIS) has emerged as a promising technology for greatly enhancing communication performance of future wireless networks. To overcome the multiplicative fading effect of passive RIS and high energy consumption of active RIS, we propose a novel dynamic subarray-based hybrid active-passive RIS (HRIS) architecture by dividing all reflecting elements into multiple sub-RISs, each of which can flexibly switch between active and passive modes. Therefore, the proposed subarray-based HRIS is anticipated to achieve optimal system performance with minimal cost and energy consumption. In this paper, we aim to maximize the energy efficiency (EE) for the subarray-based HRIS assisted multi-user multiple-input single-output (MISO) system, where the transmit beamforming vectors at the base station (BS), the mode switching matrix, and the reflection matrices of active and passive sub-RISs are jointly optimized subject to individual user rate constraints. To tackle this intractable problem, we firstly explore the feasible region of the minimum rate threshold among all users, and then develop an efficient two-layer successive convex approximation (SCA) based iterative algorithm. Considering a simplified single-user scenario, we also derive some interesting insights into the optimal active-passive sub-RISs allocation for maximizing EE. It is revealed that for a small BS transmit power, deploying more active sub-RISs in the subarray-based HRIS is preferred to attain the maximum EE. Conversely, under a high BS transmit power and a small HRIS reflection power, more sub-RISs should be switched to the passive mode. Numerical simulation results verify the superior EE performance of the proposed dynamic subarray-based HRIS over the traditional active and passive RISs.
- 31 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 13 (1) , 1054-1069
Energy Efficiency Optimization for MA-Enabled Hybrid MIMO Communication Networks
Movable antenna (MA) has been recognized as a promising technology to enhance communication network performance by adjusting the antenna position within a confined region. In this article, we consider an energy-efficient MA-enabled multiple-input–multiple-output (MIMO) network with the hybrid analog–digital transceiver, where energy consumption induced by the MA movement is additionally considered to accurately evaluate the system energy efficiency (EE) performance. Under both fully connected and partially connected transceiver structures, we aim to maximize the system EE by jointly optimizing the hybrid beamformers and antenna positions, subject to the unit-modulus constraints and the minimum MA distance constraints. To tackle these two highly nonconvex problems effectively, we propose an efficient two-layer successive convex approximation (SCA)-based iterative algorithm, where we aim to iteratively update the achievable EE in the outer layer and alternately optimize the hybrid beamformers and antenna positions in the inner layer. Furthermore, considering the asymptotically low-SNR and high-SNR regimes, we, respectively, develop two low-complexity algorithms by leveraging the structural properties of their corresponding optimal fully digital beamformers. Simulation results validate the superior EE performance and low-complexity advantage of our proposed algorithms over the existing benchmark schemes.
- 31 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 13 (1) , 1054-1069
Energy Efficiency Optimization for MA-Enabled Hybrid MIMO Communication Networks
Movable antenna (MA) has been recognized as a promising technology to enhance communication network performance by adjusting the antenna position within a confined region. In this article, we consider an energy-efficient MA-enabled multiple-input–multiple-output (MIMO) network with the hybrid analog–digital transceiver, where energy consumption induced by the MA movement is additionally considered to accurately evaluate the system energy efficiency (EE) performance. Under both fully connected and partially connected transceiver structures, we aim to maximize the system EE by jointly optimizing the hybrid beamformers and antenna positions, subject to the unit-modulus constraints and the minimum MA distance constraints. To tackle these two highly nonconvex problems effectively, we propose an efficient two-layer successive convex approximation (SCA)-based iterative algorithm, where we aim to iteratively update the achievable EE in the outer layer and alternately optimize the hybrid beamformers and antenna positions in the inner layer. Furthermore, considering the asymptotically low-SNR and high-SNR regimes, we, respectively, develop two low-complexity algorithms by leveraging the structural properties of their corresponding optimal fully digital beamformers. Simulation results validate the superior EE performance and low-complexity advantage of our proposed algorithms over the existing benchmark schemes.
- 20 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 11 (5) , 8156-8169
Hybrid Multiantenna Transceiver Optimizations for IoT Systems via Downlink–Uplink Duality
In this article, we investigate the analog–digital hybrid transceiver optimization for multiple-input–multiple-output (MIMO) Internet of Things (IoT) systems, aiming at maximizing the sum rate of multiple IoT devices in downlink communications. We first derive the downlink–uplink duality for the MIMO communications with analog–digital hybrid structures. Based on this, the intractable MIMO downlink sum-rate maximization is equivalently transferred into an easier-to-handle virtual uplink counterpart. In order to solve the nonconvex virtual uplink problem effectively, we resort to decouple the involved digital and analog matrix variables. On the one hand, we propose two kinds of algorithms for the analog matrices optimizations, namely, the joint design and the separate design. Specifically, the joint design optimizes the analog precoder and equalizer matrices in an alternating manner. In each iteration, an element-wise optimization algorithm is utilized to optimize the analog matrix variables under constant modulus constraints. For the separate design, the analog precoder and equalizer matrices are optimized separately via the elaborately designed space alignments with lower computational complexities. On the other hand, the digital precoders can be computed with fixed analog matrix variables, in which a modified iterative water-filling algorithm is proposed. Finally, numerical results demonstrate the superior performance advantages of the proposed algorithms over several benchmark algorithms.
- 20 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 11 (5) , 8156-8169
Hybrid Multiantenna Transceiver Optimizations for IoT Systems via Downlink–Uplink Duality
In this article, we investigate the analog–digital hybrid transceiver optimization for multiple-input–multiple-output (MIMO) Internet of Things (IoT) systems, aiming at maximizing the sum rate of multiple IoT devices in downlink communications. We first derive the downlink–uplink duality for the MIMO communications with analog–digital hybrid structures. Based on this, the intractable MIMO downlink sum-rate maximization is equivalently transferred into an easier-to-handle virtual uplink counterpart. In order to solve the nonconvex virtual uplink problem effectively, we resort to decouple the involved digital and analog matrix variables. On the one hand, we propose two kinds of algorithms for the analog matrices optimizations, namely, the joint design and the separate design. Specifically, the joint design optimizes the analog precoder and equalizer matrices in an alternating manner. In each iteration, an element-wise optimization algorithm is utilized to optimize the analog matrix variables under constant modulus constraints. For the separate design, the analog precoder and equalizer matrices are optimized separately via the elaborately designed space alignments with lower computational complexities. On the other hand, the digital precoders can be computed with fixed analog matrix variables, in which a modified iterative water-filling algorithm is proposed. Finally, numerical results demonstrate the superior performance advantages of the proposed algorithms over several benchmark algorithms.
- 7 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Signal Processing
- Vol. 71 (1053587X) , 3083-3099
Asynchronous Distributed Beamforming Optimization Framework for RIS-Assisted Wireless Communications
Reconfigurable intelligent surface (RIS) is a promising solution to enhance the spectral and energy efficiencies of future wireless networks. In this paper, we aim to maximize the sum rate of the RIS-assisted multiuser system with different availabilities of channel state information (CSI) by jointly optimizing the transmit precoding matrix and the RIS reflection matrix. Considering the large-scale nature of the RIS and the potential large number of served users, the conventional centralized optimization framework suffers from huge computational and communication overheads, and does not scale well with the system size. To tackle this issue, we develop an efficient asynchronous alternating direction method of multipliers (AS-ADMM) framework to maximize the sum rate under both perfect and imperfect CSI. Specifically, we firstly reformulate the original optimization problem under perfect CSI into a tractable consensus problem and then apply the proposed AS-ADMM framework to find a locally optimal solution, in which both the central server (C-server) and distributed servers (D-servers) update their variables with semi-closed-form solutions. Whereas for tackling the worst-case sum rate maximization, we firstly convert it into an equivalent max-min-max counterpart and find its semidefinite programming (SDP) based conservative approximation using the well-known sign-definiteness lemma. To drive a low-complexity solution, we develop an alternating optimization (AO) procedure that alternates between the two layers of the equivalent max-min-max problem with semi-closed-form solutions. The global optimality under a simplified scenario and the convergence behavior of the AS-ADMM algorithm are also discussed. Numerical results demonstrate the good scalability and superior performance of our proposed AS-ADMM framework over the existing benchmark schemes.
- 7 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Signal Processing
- Vol. 71 (1053587X) , 3083-3099
Asynchronous Distributed Beamforming Optimization Framework for RIS-Assisted Wireless Communications
Reconfigurable intelligent surface (RIS) is a promising solution to enhance the spectral and energy efficiencies of future wireless networks. In this paper, we aim to maximize the sum rate of the RIS-assisted multiuser system with different availabilities of channel state information (CSI) by jointly optimizing the transmit precoding matrix and the RIS reflection matrix. Considering the large-scale nature of the RIS and the potential large number of served users, the conventional centralized optimization framework suffers from huge computational and communication overheads, and does not scale well with the system size. To tackle this issue, we develop an efficient asynchronous alternating direction method of multipliers (AS-ADMM) framework to maximize the sum rate under both perfect and imperfect CSI. Specifically, we firstly reformulate the original optimization problem under perfect CSI into a tractable consensus problem and then apply the proposed AS-ADMM framework to find a locally optimal solution, in which both the central server (C-server) and distributed servers (D-servers) update their variables with semi-closed-form solutions. Whereas for tackling the worst-case sum rate maximization, we firstly convert it into an equivalent max-min-max counterpart and find its semidefinite programming (SDP) based conservative approximation using the well-known sign-definiteness lemma. To drive a low-complexity solution, we develop an alternating optimization (AO) procedure that alternates between the two layers of the equivalent max-min-max problem with semi-closed-form solutions. The global optimality under a simplified scenario and the convergence behavior of the AS-ADMM algorithm are also discussed. Numerical results demonstrate the good scalability and superior performance of our proposed AS-ADMM framework over the existing benchmark schemes.
- 27 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 71 (5) , 2602-2617
A KKT Conditions Based Transceiver Optimization Framework for RIS-Aided Multiuser MIMO Networks
In many core problems of signal processing and wireless communications, Karush-Kuhn-Tucker (KKT) conditions based optimization plays a fundamental role. Hence we investigate the KKT conditions in the context of optimizing positive semidefinite matrix variables under nonconvex rank constraints. More explicitly, based on the properties of KKT conditions, we optimize a reconfigurable intelligent surface (RIS) aided multi-user multi-input multi-output (MU-MIMO) network. Specifically, we consider the capacity maximization and sum mean square error (MSE) minimization problems of both the RIS-aided MU-MIMO uplink (UL) and downlink (DL) under multiple weighted power constraints and rank constraints. As for the RIS-aided MU-MIMO UL, the optimal structures of the signal covariance matrices are derived based on the KKT conditions. Furthermore, an efficient procedure is designed for solving the capacity maximization and sum mean square error (MSE) minimization problems. Then the UL-DL dualities are exploited for solving the capacity maximization and MSE minimization problems of the RIS-aided MU-MIMO DL based on the results of the UL optimization. Hence in the proposed framework, the phase shifting matrix of the RIS is jointly optimized with the signal covariance matrices for both the UL and DL. Our simulation results demonstrate the performance advantages of the proposed framework.
- 27 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 71 (5) , 2602-2617
A KKT Conditions Based Transceiver Optimization Framework for RIS-Aided Multiuser MIMO Networks
In many core problems of signal processing and wireless communications, Karush-Kuhn-Tucker (KKT) conditions based optimization plays a fundamental role. Hence we investigate the KKT conditions in the context of optimizing positive semidefinite matrix variables under nonconvex rank constraints. More explicitly, based on the properties of KKT conditions, we optimize a reconfigurable intelligent surface (RIS) aided multi-user multi-input multi-output (MU-MIMO) network. Specifically, we consider the capacity maximization and sum mean square error (MSE) minimization problems of both the RIS-aided MU-MIMO uplink (UL) and downlink (DL) under multiple weighted power constraints and rank constraints. As for the RIS-aided MU-MIMO UL, the optimal structures of the signal covariance matrices are derived based on the KKT conditions. Furthermore, an efficient procedure is designed for solving the capacity maximization and sum mean square error (MSE) minimization problems. Then the UL-DL dualities are exploited for solving the capacity maximization and MSE minimization problems of the RIS-aided MU-MIMO DL based on the results of the UL optimization. Hence in the proposed framework, the phase shifting matrix of the RIS is jointly optimized with the signal covariance matrices for both the UL and DL. Our simulation results demonstrate the performance advantages of the proposed framework.