Nicholas Morse
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Nicholas Morse has a total of 1 co-authors. Here are the top co-authors by number of shared publications:
- Krishnan Mahesh
University of Michigan
2 shared publications
Latest Publications
- 27 September 2025
- Published by Elsevier in International Journal of Multiphase Flow
- Vol. 194
Insights into sub-Kolmogorov-scale droplet breakup via boundary element simulations
- 27 September 2025
- Published by Elsevier in International Journal of Multiphase Flow
- Vol. 194
Insights into sub-Kolmogorov-scale droplet breakup via boundary element simulations
- Open Access
- 15 November 2023
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 975, A3
Tripping effects on model-scale studies of flow over the DARPA SUBOFF
Trip-resolved large-eddy simulations of the DARPA SUBOFF are performed to investigate the development of turbulent boundary layers (TBLs) in model-scale studies. The primary consideration of the study is the extent to which the details of tripping affect statistics in large-eddy simulations of complex geometries, which are presently limited to moderate Reynolds number TBLs. Two trip wire configurations are considered, along with a simple numerical trip (wall-normal blowing), which serves as an exemplar of artificial computational tripping methods often used in practice. When the trip wire height exceeds the laminar boundary layer thickness, shedding from the trip wire initiates transition, and the near field is characterized by an elevation of the wall-normal Reynolds stress and a modification of the turbulence anisotropy and mean momentum balance. This trip wire also induces a large jump in the boundary layer thickness, which affects the way in which the TBL responds to the pressure gradients and streamwise curvature of the hull. The trip-induced turbulence decays along the edge of the TBL as a wake component that sits on top of the underlying TBL structure, which dictates the evolution of the momentum and displacement thicknesses. In contrast, for a trip wire height shorter than the laminar boundary layer thickness, transition is initiated at the reattachment point of the trip-induced recirculation bubble, and the artificial trip reasonably replicates the resolved trip wire behaviour relatively shortly downstream of the trip location. For each case, the inner layer collapses rapidly in terms of the mean profile, Reynolds stresses and mean momentum balance, which is followed by the collapse of the Reynolds stresses in coordinates normalized by the local momentum thickness, and finally against the 99 % thickness. By this point, the lasting impact of the trip is the offset in boundary layer thickness due to the trip itself, which becomes a diminishing fraction of the total boundary layer thickness as the TBL grows. The importance of tripping the model appendages is also highlighted due to their lower Reynolds numbers and susceptibility to laminar separations.
- 15 November 2023
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 975, A3
Open AccessTripping effects on model-scale studies of flow over the DARPA SUBOFF
Trip-resolved large-eddy simulations of the DARPA SUBOFF are performed to investigate the development of turbulent boundary layers (TBLs) in model-scale studies. The primary consideration of the study is the extent to which the details of tripping affect statistics in large-eddy simulations of complex geometries, which are presently limited to moderate Reynolds number TBLs. Two trip wire configurations are considered, along with a simple numerical trip (wall-normal blowing), which serves as an exemplar of artificial computational tripping methods often used in practice. When the trip wire height exceeds the laminar boundary layer thickness, shedding from the trip wire initiates transition, and the near field is characterized by an elevation of the wall-normal Reynolds stress and a modification of the turbulence anisotropy and mean momentum balance. This trip wire also induces a large jump in the boundary layer thickness, which affects the way in which the TBL responds to the pressure gradients and streamwise curvature of the hull. The trip-induced turbulence decays along the edge of the TBL as a wake component that sits on top of the underlying TBL structure, which dictates the evolution of the momentum and displacement thicknesses. In contrast, for a trip wire height shorter than the laminar boundary layer thickness, transition is initiated at the reattachment point of the trip-induced recirculation bubble, and the artificial trip reasonably replicates the resolved trip wire behaviour relatively shortly downstream of the trip location. For each case, the inner layer collapses rapidly in terms of the mean profile, Reynolds stresses and mean momentum balance, which is followed by the collapse of the Reynolds stresses in coordinates normalized by the local momentum thickness, and finally against the 99 % thickness. By this point, the lasting impact of the trip is the offset in boundary layer thickness due to the trip itself, which becomes a diminishing fraction of the total boundary layer thickness as the TBL grows. The importance of tripping the model appendages is also highlighted due to their lower Reynolds numbers and susceptibility to laminar separations.
- Open Access
- 27 February 2023
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 958, A6
Effect of tabs on the shear layer dynamics of a jet in cross-flow
Direct numerical simulations (DNS) of a jet in cross-flow (JICF) with a triangular tab at two positions are performed at jet-to-cross-flow velocity ratios of $R = 2$ and $4$ with a jet Reynolds number of 2000 based on the jet's bulk velocity and exit diameter. The DNS and dynamic mode decomposition show the sensitivity of the tab's effect on the jet upstream shear layer (USL) structure and cross-section to $R$ , echoing the experimental discoveries of Harris et al. (J. Fluid Mech., vol. 918, 2021). Furthermore, DNS reveals that the presence of a tab placed on the upstream side of the nozzle significantly modifies the USL through production of streamwise vortices that curl around the spanwise vortex tubes originating from the primary instability of the USL. This provides an explanation for the improvement in mixing that has been associated with an upstream tab. The streamwise vortex structure shows remarkable similarities to the ‘strain-oriented vortex tubes’ observed for disturbed plane shear layers by Lasheras & Choi (J. Fluid Mech., vol. 189, 1988, pp. 53–86). For both $R$ cases, the USL instability is delayed, the jet penetration is reduced, and the jet cross-section is flattened, although the tab has a less pronounced effect on the USL structure at higher velocity ratios, where the formation of the streamwise vortices is delayed. In contrast, a tab placed 45 $^\circ$ from the upstream position produces significantly different effects compared with the upstream tab. At $R = 4$ , the jet cross-section is significantly skewed away from the tab and a tertiary vortex is formed, as observed in past studies of round JICFs at relatively high $R$ and low Reynolds numbers. The ability of the tab to produce a controllable steady-state tertiary vortex has implications for a variety of applications. The 45 $^\circ$ tab produces asymmetric effects in the wake of the jet at $R = 2$ , but the effect on the jet cross-section is much smaller, highlighting the sensitivity of jets at high $R$ to asymmetric perturbations.- 27 February 2023
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 958, A6
Open AccessEffect of tabs on the shear layer dynamics of a jet in cross-flow
Direct numerical simulations (DNS) of a jet in cross-flow (JICF) with a triangular tab at two positions are performed at jet-to-cross-flow velocity ratios of $R = 2$ and $4$ with a jet Reynolds number of 2000 based on the jet's bulk velocity and exit diameter. The DNS and dynamic mode decomposition show the sensitivity of the tab's effect on the jet upstream shear layer (USL) structure and cross-section to $R$ , echoing the experimental discoveries of Harris et al. (J. Fluid Mech., vol. 918, 2021). Furthermore, DNS reveals that the presence of a tab placed on the upstream side of the nozzle significantly modifies the USL through production of streamwise vortices that curl around the spanwise vortex tubes originating from the primary instability of the USL. This provides an explanation for the improvement in mixing that has been associated with an upstream tab. The streamwise vortex structure shows remarkable similarities to the ‘strain-oriented vortex tubes’ observed for disturbed plane shear layers by Lasheras & Choi (J. Fluid Mech., vol. 189, 1988, pp. 53–86). For both $R$ cases, the USL instability is delayed, the jet penetration is reduced, and the jet cross-section is flattened, although the tab has a less pronounced effect on the USL structure at higher velocity ratios, where the formation of the streamwise vortices is delayed. In contrast, a tab placed 45 $^\circ$ from the upstream position produces significantly different effects compared with the upstream tab. At $R = 4$ , the jet cross-section is significantly skewed away from the tab and a tertiary vortex is formed, as observed in past studies of round JICFs at relatively high $R$ and low Reynolds numbers. The ability of the tab to produce a controllable steady-state tertiary vortex has implications for a variety of applications. The 45 $^\circ$ tab produces asymmetric effects in the wake of the jet at $R = 2$ , but the effect on the jet cross-section is much smaller, highlighting the sensitivity of jets at high $R$ to asymmetric perturbations.