Yang Li

As a core component of industrial power transmission and motion control, the surface quality and dynamic performance of gears are pivotal to the transmission efficiency, durability, and reliability of mechanical equipment. Driven by extreme service conditions and the demands of high-precision applications, surface lubrication failures (such as contact fatigue and scuffing) have become a critical bottleneck limiting gear performance, making the development of advanced surface-strengthening technologies a vital direction for industrial innovation. This paper provides a systematic review of research progress in gear-related surface-strengthening technologies, with a particular focus on techniques for preparing solid lubricant layers. It elaborates on the microstructures, lubrication mechanisms, and application performance of typical solid lubricant layers (e.g., iron sulfides, nitrides, molybdenum disulfide (MoS₂), diamond-like carbon (DLC) films, and graphite-like carbon (GLC) films) in gear systems. Furthermore, it offers an in-depth analysis of the synergistic mechanisms between single-surface treatments and composite-strengthening processes. Additionally, it outlines innovative applications of additive manufacturing (AM) in gear manufacturing.

Due to their low elasticity modulus, significant fatigue strength, and good formability, titanium and titanium alloys have shown a continuous growth trend in various fields of application. However, the passivation film on the surface of titanium and titanium alloys may dissolve, leading to corrosion under certain environmental conditions. Surface modification of these materials has become an indispensable and critical step in meeting the requirements of various operating conditions of material performance. Compared to other surface treatment techniques, plasma surface treatment has advantages such as high efficiency, wide applicability, environmental friendliness, flexibility and controllability, and low-temperature treatment. This article focuses on the topic of plasma surface modification technology for titanium and titanium alloys and highlights the key limitations of Plasma chemical heat treatment, Physical Vapor Deposition (PVD), plasma-enhanced chemical vapor deposition (PECVD), Plasma immersion ion implantation (PIII), and plasma spraying (PS). The current research status of surface modification methods in improving the surface properties of titanium and titanium alloys and the prospects of surface modification technology for titanium alloys are also discussed.

Under extreme conditions such as high speed and heavy load, 18Cr2Ni4WA steel cannot meet the service requirements even after carburizing and quenching processes. In order to obtain better surface mechanical properties and tribological property, a hollow cathode ion source diffusion strengthening device was used to nitride the traditional carburizing and quenching samples. Unlike traditional ion carbonitriding technology, the low-temperature ion carbonitriding technology used in this article can increase the surface hardness of the material by 50% after 3 h of treatment, from the original 600 HV_0.1 to 900 HV_0.1, while the core hardness only decreases by less than 20%. The effect of post-ion carbonitriding treatment on mechanical properties and tribological properties of the carburized and quenched 18Cr2Ni4WA steel was investigated. Samples in different treatment are characterized using optical microscopy (OM), scanning electron microscopy (SEM), optimal SRV-4 high temperature tribotester, as well as Vickers hardness tester. Under two conditions of 6N light load and 60 N heavy load, compared with untreated samples, the wear rate of ion carbonitriding samples decreased by more than 99%, while the friction coefficient remained basically unchanged. Furthermore, the careful selection of ion nitrocarburizing and carburizing tempering temperatures in this study has been shown to significantly enhance surface hardness and wear resistance, while preserving the overall hardness of the carburized sample. The present study demonstrates the potential of ion carbonitriding technology as a viable post-treatment method for carburized gears.

Titanium alloy has the advantages of high specific strength, good corrosion resistance, and biocompatibility and is widely used in marine equipment, biomedicine, aerospace, and other fields. However, the application of titanium alloy in special working conditions shows some shortcomings, such as low hardness and poor wear resistance, which seriously affect the long life and safe and reliable service of the structural parts. Tribocorrosion has been one of the research hotspots in the field of tribology in recent years, and it is one of the essential factors affecting the application of passivated metal in corrosive environments. In this work, the characteristics of the marine and human environments and their critical tribological problems are analyzed, and the research connotation of tribocorrosion of titanium alloy is expounded. The research status of surface protection technology for titanium alloy in marine and biological environments is reviewed, and the development direction and trends in surface engineering of titanium alloy are prospected.

Low-temperature plasma nitriding of austenitic stainless steel can ensure that its corrosion resistance does not deteriorate, improving surface hardness and wear performance. Nevertheless, it requires a longer processing time. The hollow cathode discharge effect helps increase the plasma density quickly while radiatively heating the workpiece. This work is based on the hollow cathode discharge effect to perform a rapid nitriding strengthening treatment on AISI 304 stainless steels. The experiments were conducted at three different temperatures (450, 475, and 500 °C) for 1 h in an ammonia atmosphere. The samples were characterized using various techniques, including SEM, AFM, XPS, XRD, and micro-hardness measurement. Potentiodynamic polarization and electrochemical impedance spectroscopy methods were employed to assess the electrochemical behavior of the different samples in a 3.5% NaCl solution. The finding suggests that rapid hollow cathode plasma nitriding can enhance the hardness, wear resistance, and corrosion properties of AISI 304 stainless steel.