Tianyu Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tianyu Wang has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
Christopher K.Y. Leung
5 shared publications- Jishen Qiu
The Hong Kong University of Science and Technology
4 shared publications Bo Wu
2 shared publications- Bo Wu
Hong Kong University of Science & Technology (HKUST)
2 shared publications Haoliang Wu
2 shared publicationsYihong Tang
2 shared publications
Latest Publications
- Open Access
- 25 February 2026
- Published by Elsevier in SSRN Electronic Journal
Effect of carbon sequestration-induced material non-homogeneity on shear behavior of a demountable steel beam–slab connector – a pilot study with strain-hardening magnesia composites (SHMC)
Strain-hardening magnesia composite (SHMC) offers considerable CO2-sequestering capability and tensile ductility, but how depth-dependent carbonation and strength gradients affect structural load transfer remains unclear. This study developed a prefabricated steel–SHMC composite system with a bolt–wedge demountable connection and evaluated its interface behavior by coupled depth-resolved material characterization and structural push-out testing, benchmarking against C50 concrete. Three SHMC mixtures (two binder systems and two fiber hybridizations) were characterized by depth-dependent phase analysis and compressive strength profiling. The results showed distinct carbonation-induced strength gradients across mixtures, which were reflected in different interface shear responses. In push-out tests, steel–SHMC specimens exhibited lower peak shear resistance than steel–C50 (287–343 kN vs. 546 kN) but achieved an order-of-magnitude larger peak slip (25–39 mm vs. ~2 mm) and substantially higher energy absorption up to peak. Interface stiffness evolution depended strongly on mixture uniformity: the relatively uniform mixture showed smooth degradation, whereas the surface-dominated, steep-gradient mixture exhibited a pronounced stiffness drop followed by a distinct mid-stage stiffness recovery. Together with the markedly higher structural-scale CO2 uptake (18.0–34.5 kg/m2 for 150-mm SHMC slabs vs. 1.5–3.0 kg/m2 for C50), these findings highlight a carbonation-dependent interface mechanism and support steel–SHMC assemblies as low-carbon, reusable structures.
- 25 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessEffect of carbon sequestration-induced material non-homogeneity on shear behavior of a demountable steel beam–slab connector – a pilot study with strain-hardening magnesia composites (SHMC)
Strain-hardening magnesia composite (SHMC) offers considerable CO2-sequestering capability and tensile ductility, but how depth-dependent carbonation and strength gradients affect structural load transfer remains unclear. This study developed a prefabricated steel–SHMC composite system with a bolt–wedge demountable connection and evaluated its interface behavior by coupled depth-resolved material characterization and structural push-out testing, benchmarking against C50 concrete. Three SHMC mixtures (two binder systems and two fiber hybridizations) were characterized by depth-dependent phase analysis and compressive strength profiling. The results showed distinct carbonation-induced strength gradients across mixtures, which were reflected in different interface shear responses. In push-out tests, steel–SHMC specimens exhibited lower peak shear resistance than steel–C50 (287–343 kN vs. 546 kN) but achieved an order-of-magnitude larger peak slip (25–39 mm vs. ~2 mm) and substantially higher energy absorption up to peak. Interface stiffness evolution depended strongly on mixture uniformity: the relatively uniform mixture showed smooth degradation, whereas the surface-dominated, steep-gradient mixture exhibited a pronounced stiffness drop followed by a distinct mid-stage stiffness recovery. Together with the markedly higher structural-scale CO2 uptake (18.0–34.5 kg/m2 for 150-mm SHMC slabs vs. 1.5–3.0 kg/m2 for C50), these findings highlight a carbonation-dependent interface mechanism and support steel–SHMC assemblies as low-carbon, reusable structures.
- 20 November 2025
- Published by Elsevier in Construction and Building Materials
- Vol. 503
Reactive magnesia cement-aggregate interfacial properties: A comparison with hydraulic cement
- 20 November 2025
- Published by Elsevier in Construction and Building Materials
- Vol. 503
Reactive magnesia cement-aggregate interfacial properties: A comparison with hydraulic cement
- 11 October 2024
- Published by Elsevier in Cement and Concrete Composites
- Vol. 154
Combined effect of self-stressing and confinement on GFRP-LC3 interface bond
- 11 October 2024
- Published by Elsevier in Cement and Concrete Composites
- Vol. 154
Combined effect of self-stressing and confinement on GFRP-LC3 interface bond
- Open Access
Performance Evaluation of Foamed Concrete with Lightweight Aggregate: Strength, Shrinkage, and Thermal Conductivity
Lightweight concrete offers numerous advantages for modular construction, including easier construction planning and logistics, and the ability to offset additional dead loads induced by double-wall and double-slab features. In a previous study, authors proposed incorporating lightweight aggregate into foamed concrete instead of adding extra foam to achieve lower density, resulting in lightweight concrete with an excellent strength-to-density ratio. This paper further investigated the performance aspects of foamed concrete with lightweight aggregate beyond mechanical strength. To evaluate the effect of aggregate type and foam content, three mix compositions were designed for the lightweight concrete. Specimens were prepared for experimental tests on thermal conductivity and drying shrinkage of lightweight concrete. Results showed that while both the increase in foam volume and the incorporation of lightweight aggregate led to higher drying shrinkage, they also contributed to improved insulating properties and reduced potential of cracking. Using typical multi-storey modular residential buildings in Hong Kong and three other Chinese cities as case studies, simulations were performed to assess potential savings in annual cooling and heating loads by employing the proposed lightweight concrete. These findings demonstrate the practical benefits of using foamed concrete with lightweight aggregate in modular construction and provide valuable insights for further optimization and implementation.
Open AccessPerformance Evaluation of Foamed Concrete with Lightweight Aggregate: Strength, Shrinkage, and Thermal Conductivity
Lightweight concrete offers numerous advantages for modular construction, including easier construction planning and logistics, and the ability to offset additional dead loads induced by double-wall and double-slab features. In a previous study, authors proposed incorporating lightweight aggregate into foamed concrete instead of adding extra foam to achieve lower density, resulting in lightweight concrete with an excellent strength-to-density ratio. This paper further investigated the performance aspects of foamed concrete with lightweight aggregate beyond mechanical strength. To evaluate the effect of aggregate type and foam content, three mix compositions were designed for the lightweight concrete. Specimens were prepared for experimental tests on thermal conductivity and drying shrinkage of lightweight concrete. Results showed that while both the increase in foam volume and the incorporation of lightweight aggregate led to higher drying shrinkage, they also contributed to improved insulating properties and reduced potential of cracking. Using typical multi-storey modular residential buildings in Hong Kong and three other Chinese cities as case studies, simulations were performed to assess potential savings in annual cooling and heating loads by employing the proposed lightweight concrete. These findings demonstrate the practical benefits of using foamed concrete with lightweight aggregate in modular construction and provide valuable insights for further optimization and implementation.
- Open Access
- 30 July 2024
- Published by Elsevier in SSRN Electronic Journal
Combined Effect of Self-Stressing and Confinement on Gfrp-Lc3 Interface Bond
The load capacity, failure mode and durability of reinforced concrete members are strongly affected by the bond strength between the concrete and the reinforcement. This work presents a physics-based approach to improve the bond strength based on self-stressing effect. Combination of limestone calcined clay cement (LC3) and calcium sulphoaluminate cement (CSA) with different ratios was employed to develop self-stressing function. The addition of CSA induces a remarkable volume expansion of matrix due to the formation of ettringite, it however leads to a decreased compressive strength because of the reduced Portlandite content and increased porosity. A push-out test was conducted to evaluate the interface properties between glass fiber reinforced polymer (GFRP) and LC3-based matrix. The results show that the interface bond strength is highly dependent on the matrix strength under unconfined condition. On the contrary, under confined condition, the interface bond strength increases linearly with the expansion value regardless of matrix strength, attributed to that the self-stressing effect can effectively refine the matrix pores and densify the interface transition zone. The findings from this work demonstrate that the self-stressing effect holds promise to be a plausible method to strengthen the overall properties of reinforced concrete without creating additional carbon emission.
- 30 July 2024
- Published by Elsevier in SSRN Electronic Journal
Open AccessCombined Effect of Self-Stressing and Confinement on Gfrp-Lc3 Interface Bond
The load capacity, failure mode and durability of reinforced concrete members are strongly affected by the bond strength between the concrete and the reinforcement. This work presents a physics-based approach to improve the bond strength based on self-stressing effect. Combination of limestone calcined clay cement (LC3) and calcium sulphoaluminate cement (CSA) with different ratios was employed to develop self-stressing function. The addition of CSA induces a remarkable volume expansion of matrix due to the formation of ettringite, it however leads to a decreased compressive strength because of the reduced Portlandite content and increased porosity. A push-out test was conducted to evaluate the interface properties between glass fiber reinforced polymer (GFRP) and LC3-based matrix. The results show that the interface bond strength is highly dependent on the matrix strength under unconfined condition. On the contrary, under confined condition, the interface bond strength increases linearly with the expansion value regardless of matrix strength, attributed to that the self-stressing effect can effectively refine the matrix pores and densify the interface transition zone. The findings from this work demonstrate that the self-stressing effect holds promise to be a plausible method to strengthen the overall properties of reinforced concrete without creating additional carbon emission.