INIrdayanti Mat Nashir

Irdayanti Mat Nashir

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Irdayanti Mat Nashir has a total of 53 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Application of Beidou Navigation Signal Enhancement Technology in Agricultural Machinery Operation Under a Complex Farmland Environment

    by Wang Jin, Irdayanti Mat Nashir

    Navigational systems with high accuracy capabilities are essential modern tools for sophisticated agricultural operations, particularly when used in challenging environments. For fully automated agrarian vehicles, the BeiDou Navigation Satellite System, when combined with RTK and inertial navigation systems, provides high accuracy at a reasonable cost. This paper focuses on enhancing the BeiDou System for better navigation accuracy under farmland complexities like signal blockage, multipath interference, and rough terrain. A low-cost RTK-BDS/INS navigation system, which employs Kalman filtering and multipath reduction techniques, was built. Testing in various areas, including open fields, densely vegetated regions, and those with obstructed signals, demonstrated that the system achieved position accuracy better than 3 cm in open areas and better than 10 cm in more obstructed environments. The system was validated for accuracy, resilience, and real-time performance and was found to have improved flexibility, speed, and efficiency in operation. In addition, precision agriculture through IoT and 5G sensors enabled advanced autonomous controls for tasks such as precision seeding, fertilization, and path following. This approach facilitates further development in machine automation for sustainable agriculture, advancing precision and conventional farming systems through data integration.

  • Open Access

    Air Conditioning System Maintenance Automation with Smart Sensors for Energy Efficiency

    by Muhamad Asrul Affendi Mat Nor, Farah Waheda Othman, Irdayanti Mat Nashir, Sudiyatno Sudiyatno

    A decrease in the performance of a split unit type air conditioning system can be caused by a number of factors, such as airflow obstruction by foreign matter or component maintenance problems. As a result, the use of electricity becomes inefficient, causing operating costs to increase. This study aims to develop a device that can warn users about the appropriate time for maintenance of split unit air conditioning systems. The two main objectives of this study are: first, design and build a sensor that can tell users the best time to carry out maintenance; second, analyze the capability of this sensor as a tool to measure Coefficient of Performance (COP) for split unit air conditioning. In addition, this study also aims to provide a deeper understanding of COP measurement as well as how the sensor can help improve the energy efficiency of the air conditioning system. The research methodology involves analyzing the performance of the split unit air conditioning system by considering the COP as well as the air flow speed in the condenser and evaporator. The best COP achieved is 5.19, while the lowest COP is 1.98. This study found that optimal maintenance should be done when the COP is in the range of 2 to 4. Using this sensor, electricity can be saved significantly by carrying out maintenance at the right time, simultaneously reducing operating costs and increasing the energy efficiency of the air conditioning system.

  • Open Access

    Challenges for Compliance with Industrial Effluent Regulations—An Industry Perspective

    by Zulaikha Mokhtar, Steven Kenway, Irdayanti Mat Nashir

    This study thoroughly examines the environmental challenges faced by Malaysian industries in adhering to industrial effluent regulations, addressing the question: what are the obstacles to compliance from the industry’s perspective? This study focuses on eight industries known for low environmental compliance over a seven-year period. Interviews with 13 stakeholders with combined operational experience of over 200 years were conducted to uncover barriers to compliance from the industry’s viewpoint. Key challenges identified include costs, employee attitudes, technology, management support, public complaints, and jurisdictional issues. The responses highlighted the complexity of compliance issues, ranging from divergent to unified viewpoints. According to respondents, enhancing compliance hinges on behavioral changes driven by awareness, incentives, enforcement, guidance, industry ratings, management commitment, and public disclosure of emissions data. This approach provides fresh practical insights that contribute to policy development, insights not previously documented in the literature. This study underscores the government’s crucial role in regulation adherence and the need to analyze barriers and explore alternative approaches. Understanding industry perspectives and strategies for continuous improvement is imperative. Therefore, analyzing current challenges and adopting adaptive measures are essential steps towards achieving self-compliance, continuous improvement, and ensuring environmental sustainability.


  • Open Access

    The Development of Augmented Reality Application in Electronic Design Topic under Design and Technology: Application Design Validation

    by Mohd Hamizan Jafini, Irdayanti Mat Nashir, Sudiyatno Sudiyatno, Ramlee Mustapha, Ahmad Zulhairie Abu Bakar, Yusmahnizam Yusof, Nurhan Ayub

    The evolution of education has brought significant transformation of Teaching and Learning (T&L) sessions with technologies and digital products, offering students engagement with new learning experiences. This change leads to the change of curriculum of education in Malaysia especially in technical and vocational subject. Design and Technology (D&T) is one of the newest subjects which is replaced from Integrated Life Skills. There are multiple studies shows electronic topic is one of the hardest topics in D&T which leads to difficulty of students to reach their highest mastery level in Curriculum Standard and Assessment Documentation (DSKP). The teachers and students do not have enough time to build electronic project due to their lack of technical skills and poor visualisation effect of students. This purpose of this study is to design and develop Augmented Reality (AR) application in electronic topic and validate the application design validity among experts. This study uses qualitative research design with the help of model ADDIE approach which focuses more on design, development, and implementation phase. The design and development of application uses main theories which are Multisensory Learning and Mayer’s Cognitive Theory of Multimedia Learning with the help of navigation map, wireframe, and storyboards. After design and development phase, the application design will be validated by three experts who are in Information Technology, and Computer Science field by using questionnaire. There are 12 items in questionnaire to validate the application design validity. The data of the study is analysed by using Content Validity Index (CVI). The result of CVI value for all items are 1.00 and the value of S-CVI is 1.00. This shows the application design validity can be used in pilot study and actual study to see the usability or effectiveness of the application. In conclusion, application design had been validated by experts which could enhance the quality of application design and find the gaps of the research in future studies which are findings its usability and effectiveness of the application.


  • Open Access

    CNC Learning Innovation: Improving Students' Self-Efficacy and Creativity through Peer-PBL

    by Sutopo Sutopo, Bayu Rahmat Setiadi, Irdayanti Mat Nashir, Virda Hersy Lutviana Saputri, Achmad Arifin, Tri Adi Prasetya, Chrisna Tri Harjanto, Beni Tri Sasongko

    The demand for increasingly diverse product designs and specifications in the manufacturing industry requires CNC machine operators to have high technical skills and strong self-efficacy and creativity. High self-efficacy allows operators to be more confident in applying their technical skills, while creativity helps them solve problems and challenges during the production process. This study aims to improve students' self-efficacy and creativity by applying the Peer-Project Based Learning (Peer-PjBL) model, which combines aspects of project-based learning with peer-to-peer learning. The method used in this research is Classroom Action Research (PTK), which consists of two implementation cycles. Each cycle involves planning, implementation, observation, and reflection stages. The subjects of this study were 20 students who took the CNC Machining Technology course at Yogyakarta State University. Data were collected using a questionnaire that measured self-efficacy and student creativity indicators and then analyzed descriptively. The results showed that applying the Peer-PjBL method significantly increased students' self-efficacy and creativity in each research cycle. This improvement can be seen in students' ability to face new challenges independently, as well as their ability to generate diverse creative ideas in solving problems. This research makes an important contribution to the development of learning methods in vocational education by emphasizing the improvement of technical abilities and non-technical skills, such as self-efficacy and creativity, which are needed in the modern world of work.


  • Open Access

    Challenges for Compliance with Industrial Effluent Regulations – the Industry Perspective

    by Zulaikha Mokhtar, Steven Kenway, Ilje Pikaar, Irdayanti Mat Nashir

    This study examines the environmental challenges faced by Malaysian industries in adhering to industrial effluent regulations with the research question, what are the challenges in complying with environmental legislations from industries? It investigates the primary factors contributing to non-compliance and the perspectives, knowledge, and needs of Malaysian industries regarding environmental compliance. This study recommends the best strategy for promoting self-compliance. Thirteen stakeholders from various industries with environmental management experience were interviewed. Over the past seven years, these industries have shown low com-pliance with the Industrial Effluent Regulation 2009, prompting an exploration of their adaptability to regulations. Challenges identified include cost, employee attitudes, technology, management support, public complaints, and jurisdictional issues. Responses varied from divergent to unified viewpoints, highlighting the complexity of compliance issues. Respondents suggested enhancing compliance through behavioral changes, including incentives, enforcement, awareness, guidance, industry ratings, management commitment, and public disclosure of emissions. Suggestions for improvement and innovative solutions emerged based on participants' experiences, emphasizing the importance of continuous improvement. The study emphasizes the government's crucial role in ensuring regulation adherence but underscores the need for analyzing barriers and exploring alternative approaches. Understanding industry perspectives and strategies is essential for progress. Compliance, however, requires an analysis of the current challenges and adopting adaptive measures. It is important to understand industries' perspectives and strategies to move forward.


  • Open Access

    JOB CREATORS OF FRESH GRADUATES IN TECHNICAL INSTITUTIONS

    by Irdayanti Mat Nashir, Ramlee Mustapha, Mohamad Amiruddin Bin Ismail, Sudiyatno Dikas Partodiwiryo, Wan Nurlisa Wan Ahmad

    Objective: The main objective of this research is to explore the elements of technical graduates who want to create their own jobs after graduated. Theoretical Framework: The study aims to list down the elements of technical graduates who want to create their own jobs using Delphi Technique. Kajian ini menggunakan Entrepreneurship Theory, Supply and Demand Theory, Human Capital Theory, Innovation Theory dan Structural Unemployment Theory sebagai asas dalam pembangunan kerangka tersebut. Design/Methodology/Approaches: This study uses primary data where elements are obtained from articles, journals, books related to entrepreneurship, career, and employability. The approach used in this study is quantitative and the Delphi Technique has been applied in collecting and validating the collected elements. The quantitative approach used is to use a cross-sectional survey design where a set of questionnaires has been distributed to 331 graduates in technical fields in Malaysia to answer the main purpose of the study which is to identify students' perceptions of 17 elements that have been confirmed by experts and to find if there are a significant relationship between parents' occupational background to these 17 confirmed elements among students. Findings: The data obtained was analysed using descriptive and inferential statistical analysis, which is Mean, Median, Interquartile Range and Standard Deviation to answer each stated research objective. Overall, technical graduates have an average perception of the elements of creating a job. They lack this element in themselves as a job creator. The conclusion of this research, it is hoped that the interest groups involved in curriculum development, the administrators as well as the students themselves can improve themselves with skills and business knowledge so that the spirit of entrepreneurship increases among students and at the same time can reduce the unemployment rate and matching in the job and the business field that is engaged with the field that have been studied in institution. Originality/Value: This study is more relevant and practically applied to education institutions who want to offer new programs to graduates and create courses or programs related to student competence.

  • Open Access

    Government Direction on the Vocational School’s Performance Evaluation in Indonesia and Malaysia: Some Notes from Islamic Education’s Perspective

    by Nurtanio Agus Purwanto, Lia Yuliana, Priadi Surya, Aris Suharyadi, Irdayanti Mat Nashir, Siti Soraya Lin Abullah Kamal, Ahmad Darmadji

    The vocational high school principal is a determining factor for the progress or failure of a school. Therefore, the principal's performance evaluation must be optimal. This study explores the government direction on this performance evaluation in two neighboring countries: Indonesia and Malaysia. The research method uses a qualitative approach, by interviewing both school supervisors and principals, and analyzing documents. The steps are 1) collection of resources through multi techniques; 2) reducing data with the aim of simplifying and categorizing data; 3) presenting data in the form of qualitative descriptions; 4) drawing conclusions and 5) compiling research reports and formulate comparative research findings. For Indonesia, once a year, the School Supervisor and a team from the Education Office in Indonesia are responsible for carrying out the review of the performance of the principals of vocational schools. The current evaluation of the principal of a vocational high school in Malaysia is a component of the overall review of the school's performance. Standard of Educational Quality in Malaysia is the name given to this evaluation, and it has been in effect since 2017. Standard 1 Kepemimpin is the most important benchmark to consider in relation to principal performance (Leadership). The performance evaluation in Indonesia seems still separated from school performance evaluation or accreditation. Although each evaluation scheme has its own format and purposes, the implementation could be made in such a concurrent time. Meanwhile in Malaysia, the principal performance is likely one of the evaluated aspects in the school performance evaluation (SKPM), especially Standard 1 Kepemimpinan (leadership) and Standard 2 Pengurusan Organisasi (organization management).


  • Nonlinear Forced Vibration Analysis of Two-Directional Functionally Graded Truncated Conical Shells

    by Jin Wang, Irdayanti Mat Nashir, Sahar Beygzade

    It is crucial to comprehend the nonlinear vibration behavior of sophisticated engineering constructions to aid in the examination, creation and production procedures. The primary objective of this study, therefore, is to focus on exploring the nonlinear forced vibrational characteristics of two-directional functionally graded (TDFG) cone-shaped shell for the first time. To accomplish this, the motion equations of the TDFG cone-shaped shell are derived based upon the framework of first-order shear deformation theory (FSDT) in conjunction with von Kármán assumption. TDFG cone-shaped shell models have mechanical properties that can change smoothly and continuously across the thickness and length of the shell, following a power law distribution pattern. To discretize the partial differential equations and transform them into ordinary differential equations, the Galerkin approach was used and ultimately, these equations were solved using the multiple time scales method. The accuracy and effectiveness of this analytical model are indicated through comparison with existing solutions. Finally, some comprehensive parametric investigations are carried out to gain insight into the impacts of several factors on the nonlinear behavior of the shell, highlighting the significant influence of transverse and longitudinal gradient indices on the nonlinear frequency response, which is not considered before. The new insights gained from this research could serve as valuable benchmark outcomes as well as contribute to a more comprehensive understanding of the nonlinear vibrations in future analysis and design processes.


  • Open Access

    Anxiety status of junior archers in COVID-19 during training isolation period towards the shooting performance

    by Wan Nurlisa Wan Ahmad, Mohd Azrul Hisham Mohd Adib, Irdayanti Mat Nashir, Mon Redee Sut Txi, Fatin Nurfatehah Mat Salleh, Jing Rui Tang

    Studies have indicated that the COVID-19 pandemic has had miserable effects on athlete performance due to the movement control order (MCO) announced by the Malaysia Government. Dealing with self-training without the coach's guidance leads the archers to lose concentration, diminished self-confidence, and elevated anxiety levels. These factors contribute to inconsistent shooting performance. This study attempted to identify the archer's anxiety status during the training isolation period on the shooting performance. A total of 32 participants from the recurve archery category were recruited and enrolled in a web-based cross-sectional study during the MCO. The CSAI-2R instrument was applied to participants to examine the psychological aspect. Training Isolation resulted in a significant effect on anxiety status and shooting performance. Analysis from CSAI-2R, low-level archers, indicated 5% more anxiety than top-level archers for both cognitive and somatic anxiety sub-component. In contrast, Top archers revealed a higher self-confidence mean of 2.32 (moderately high) than low archers (1.38). The result shows improvement in anxiety and score performance with complete online monitoring and coaching supervision first session until the 8th session. These findings could assist sports institutions in improving a better training experience and understanding the pandemic's impact on athletes' mental health during home isolation.