Wen-Hsiang Lu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Wen-Hsiang Lu has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Yao-Jen Lee
Institute of Pioneer Semiconductor Innovation, National Yang Ming Chiao Tung University, Hsinchu, Taiwan
3 shared publications - Yeong-Her Wang
National Cheng-Kung University
2 shared publications Chen-Wei Wu
Department of Electronic Engineering, National Taipei University of Technology, Taipei, Taiwan
1 shared publication- Chia-Tsong Chen
Semiconductor Frontier Research Center, National Institute of Advanced Industrial Science and Technology, Tsukuba, Ibaraki, JAPAN
1 shared publication - Hsin-Hui Hu
Department of Electronic Engineering, National Taipei University of Technology, Taipei, Taiwan
1 shared publication - Jiun-Yun Li
Graduate Institute of Electronics Engineering, National Taiwan University, Taipei, Taiwan
1 shared publication
Latest Publications
- 19 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 47 (3) , 621-624
First Demonstration of High-Performance Three-Tier IGZO Channels Gate-All-Around Thin-Film Transistors With Novel Metal Interlayer Contact
For the first time, highly integrated IGZO transistors suitable for back-end-of-line (BEOL) integration are demonstrated, leveraging an in-situ ozone interfacial layer (IL) treatment before HfO deposition. The ozone-treated gate-all-around (GAA) devices achieve an outstanding sub-threshold swing (S.S.) of 64 mV/dec at L = 150 nm, approaching the theoretical limit, and exhibit an Ion/Ioff ratio exceeding 1.44×108. The ozone IL treatment significantly reduces oxygen vacancy (VO) concentration, enhancing channel integrity, electrostatic control, reliability, scalability, and subthreshold swing precision. This metal interlayer significantly reduces source/drain contact resistance, resulting in a 2.3× performance enhancement for three-tier devices compared to single-tier counterparts. These combined advancements underscore the potential of IGZO GAA structures for next-generation high-performance semiconductor applications.
- 19 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 47 (3) , 621-624
First Demonstration of High-Performance Three-Tier IGZO Channels Gate-All-Around Thin-Film Transistors With Novel Metal Interlayer Contact
For the first time, highly integrated IGZO transistors suitable for back-end-of-line (BEOL) integration are demonstrated, leveraging an in-situ ozone interfacial layer (IL) treatment before HfO deposition. The ozone-treated gate-all-around (GAA) devices achieve an outstanding sub-threshold swing (S.S.) of 64 mV/dec at L = 150 nm, approaching the theoretical limit, and exhibit an Ion/Ioff ratio exceeding 1.44×108. The ozone IL treatment significantly reduces oxygen vacancy (VO) concentration, enhancing channel integrity, electrostatic control, reliability, scalability, and subthreshold swing precision. This metal interlayer significantly reduces source/drain contact resistance, resulting in a 2.3× performance enhancement for three-tier devices compared to single-tier counterparts. These combined advancements underscore the potential of IGZO GAA structures for next-generation high-performance semiconductor applications.
- 8 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (8) , 4710-4716
Sub-μm Gate-All-Around-Like Amorphous-InGaZnO Transistors With Record-High fT of 2.09 GHz
In this study, we demonstrate amorphous indium–gallium–zinc oxide ( $\alpha $ -IGZO) radio frequency (RF) thin film transistors (TFTs) with sub-100 nm gate-all-around-like (GAA-like) gate and fin width down to 60 nm. The direct current (dc) and high frequency (HF) performance impacted by the device structure of are investigated in detail including double gate length ( $\textit{L}_{\text{DG}}$ ), top/bottom gate length ( $\textit{L}_{\text{TG}}$ / $\textit{L}_{\text{BG}}$ ), source/drain distance ( $\textit{D}_{\text{SD}}$ ), and fin width ( $\textit{W}_{\text{CH}}$ ). The results show that the influence of $\textit{D}_{\text{SD}}$ and $\textit{L}_{\text{TG}}$ are highly related to sulfur-hexafluoride (SF $_{\text{6}}$ ) etching process during top gate definition. Besides, single-channel design has better both dc and HF performance owing to lower interface trap and capacitance, respectively. With the appropriate device architecture, $\alpha $ -IGZO GAA-like TFTs perform a high on/off ratio ( $\textit{I}_{\text{on}}$ / $\textit{I}_{\text{off}}$ ) $>$ 10 $^{\text{11}}$ , a steep subthreshold swing (S.S.) of 81.25 mV/dec, a high transconductance ( $\textit{g}_{\text{m}}$ ) of 30.89 $\mu$ S/ $\mu$ m, a high on-state current (I $_{\text{on}}$ ) of 100.26 $\mu$ A/ $\mu$ m under $\textit{V}_{\text{DS}}$ $=$ 1 V, and recorded cutoff frequency ( $\textit{f}_{\text{T}}$ ) of 2.09 GHz at $\textit{V}_{\text{DS}}$ of 2 V.
- 8 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (8) , 4710-4716
Sub-μm Gate-All-Around-Like Amorphous-InGaZnO Transistors With Record-High fT of 2.09 GHz
In this study, we demonstrate amorphous indium–gallium–zinc oxide ( $\alpha $ -IGZO) radio frequency (RF) thin film transistors (TFTs) with sub-100 nm gate-all-around-like (GAA-like) gate and fin width down to 60 nm. The direct current (dc) and high frequency (HF) performance impacted by the device structure of are investigated in detail including double gate length ( $\textit{L}_{\text{DG}}$ ), top/bottom gate length ( $\textit{L}_{\text{TG}}$ / $\textit{L}_{\text{BG}}$ ), source/drain distance ( $\textit{D}_{\text{SD}}$ ), and fin width ( $\textit{W}_{\text{CH}}$ ). The results show that the influence of $\textit{D}_{\text{SD}}$ and $\textit{L}_{\text{TG}}$ are highly related to sulfur-hexafluoride (SF $_{\text{6}}$ ) etching process during top gate definition. Besides, single-channel design has better both dc and HF performance owing to lower interface trap and capacitance, respectively. With the appropriate device architecture, $\alpha $ -IGZO GAA-like TFTs perform a high on/off ratio ( $\textit{I}_{\text{on}}$ / $\textit{I}_{\text{off}}$ ) $>$ 10 $^{\text{11}}$ , a steep subthreshold swing (S.S.) of 81.25 mV/dec, a high transconductance ( $\textit{g}_{\text{m}}$ ) of 30.89 $\mu$ S/ $\mu$ m, a high on-state current (I $_{\text{on}}$ ) of 100.26 $\mu$ A/ $\mu$ m under $\textit{V}_{\text{DS}}$ $=$ 1 V, and recorded cutoff frequency ( $\textit{f}_{\text{T}}$ ) of 2.09 GHz at $\textit{V}_{\text{DS}}$ of 2 V.
- 27 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (4) , 2028-2033
Fabrication of GeSn Nanowire MOSFETs by Utilizing Highly Selective Etching Techniques
Germanium–tin (GeSn) epitaxy layer was prepared on an 8-in SOI wafer with a Ge buffer layer. The etching rates of different solutions for the GeSn layer were investigated. The ammonia peroxide mixture can remove the Ge buffer layer with high efficiency and selectivity to the GeSn layer. Heated ammonia solution is able to etch the Si layer without damaging the GeSn layer significantly. The two-step etching process developed in this study is conducive to achieving GeSn nanowires (NWs) by selectively etching the Ge buffer and Si bottom layers. GeSn NWFETs were fabricated and measured. The strain of the GeSn NW channels is preserved with the optimized fabrication process proposed in this study.
- 27 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (4) , 2028-2033
Fabrication of GeSn Nanowire MOSFETs by Utilizing Highly Selective Etching Techniques
Germanium–tin (GeSn) epitaxy layer was prepared on an 8-in SOI wafer with a Ge buffer layer. The etching rates of different solutions for the GeSn layer were investigated. The ammonia peroxide mixture can remove the Ge buffer layer with high efficiency and selectivity to the GeSn layer. Heated ammonia solution is able to etch the Si layer without damaging the GeSn layer significantly. The two-step etching process developed in this study is conducive to achieving GeSn nanowires (NWs) by selectively etching the Ge buffer and Si bottom layers. GeSn NWFETs were fabricated and measured. The strain of the GeSn NW channels is preserved with the optimized fabrication process proposed in this study.