Jakub Wiech
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jakub Wiech has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
Artur Bełzo
Rzeszów University of Technology
1 shared publicationJarosław Sęp
Rzeszów University of Technology
1 shared publicationKatarzyna Antosz
Rzeszów University of Technology
1 shared publicationRyszard Perłowski
Rzeszów University of Technology
1 shared publication- Sebastian Jakubowski
Rzeszów University of Technology
1 shared publication Sławomir Prucnal
Rzeszów University of Technology
1 shared publication
Latest Publications
- Open Access
- 12 December 2025
- Published by Polish Academy of Sciences Chancellery in Bulletin Of The Polish Academy Of Sciences-Technical Sciences
- p. 157321
Analysis of the sensor architecture for a level 3 autonomy system in tracked military vehicles
The article presents an analysis of the sensor system architecture designed for third-level autonomy in full-scale tracked platforms intended for military applications. In particular, it focuses on the use of advanced data fusion, enabling the integration of information from heterogeneous sensors, such as LiDARs, cameras, ToF (time-of-flight) sensors, inertial measurement units (IMUs), radars, and vehicle on-board systems. This configuration ensures a high degree of environmental perception accuracy and reliability in decision-making, which is crucial under the dynamic and demanding terrain conditions typical of combat operations. It also enhances situational awareness. Key aspects of designing the sensory system are discussed in detail, including the optimal selection of sensors, their placement on the tracked vehicle, and the implementation of real-time data fusion algorithms. The analysis covers the evaluation of these technologies in terms of environmental mapping accuracy, operational reliability, and adaptability under varying operational conditions. The research results indicate that an appropriate sensor architecture, supported by advanced data processing methods, significantly improves the effectiveness of condition-based autonomous control and the vehicle ability to adapt to the specific requirements of combat missions. The conclusions drawn from the study provide valuable guidance in designing modern military vehicles that utilize state-of-the-art sensing technologies and autonomous algorithms.
- 12 December 2025
- Published by Polish Academy of Sciences Chancellery in Bulletin Of The Polish Academy Of Sciences-Technical Sciences
- p. 157321
Open AccessAnalysis of the sensor architecture for a level 3 autonomy system in tracked military vehicles
The article presents an analysis of the sensor system architecture designed for third-level autonomy in full-scale tracked platforms intended for military applications. In particular, it focuses on the use of advanced data fusion, enabling the integration of information from heterogeneous sensors, such as LiDARs, cameras, ToF (time-of-flight) sensors, inertial measurement units (IMUs), radars, and vehicle on-board systems. This configuration ensures a high degree of environmental perception accuracy and reliability in decision-making, which is crucial under the dynamic and demanding terrain conditions typical of combat operations. It also enhances situational awareness. Key aspects of designing the sensory system are discussed in detail, including the optimal selection of sensors, their placement on the tracked vehicle, and the implementation of real-time data fusion algorithms. The analysis covers the evaluation of these technologies in terms of environmental mapping accuracy, operational reliability, and adaptability under varying operational conditions. The research results indicate that an appropriate sensor architecture, supported by advanced data processing methods, significantly improves the effectiveness of condition-based autonomous control and the vehicle ability to adapt to the specific requirements of combat missions. The conclusions drawn from the study provide valuable guidance in designing modern military vehicles that utilize state-of-the-art sensing technologies and autonomous algorithms.
- 10 June 2025
- Published by Springer Nature
- p. 149-159
Analysis of Static and Dynamic Ball Burnishing of Aluminum: A Servo-Controlled Crank Mechanism Approach
- 10 June 2025
- Published by Springer Nature
- p. 149-159
Analysis of Static and Dynamic Ball Burnishing of Aluminum: A Servo-Controlled Crank Mechanism Approach
- 16 September 2023
- Published by PIAP - Industrial Research Institute for Automation and Measurements in Pomiary Automatyka Robotyka
- Vol. 27 (3) , 107-117
Trajectory Tracking of a Wheeled Robotic Group Connected with Virtual Spring-Damper Mesh
W artykule przedstawiono rozwiązanie problemu śledzenia trajektorii przez grupę robotów kołowych w środowisku bez przeszkód. Śledzenie trajektorii rozumiane jest jako podążanie za punktem odniesienia przez geometryczny środek grupy, wraz z...
- 16 September 2023
- Published by PIAP - Industrial Research Institute for Automation and Measurements in Pomiary Automatyka Robotyka
- Vol. 27 (3) , 107-117
Trajectory Tracking of a Wheeled Robotic Group Connected with Virtual Spring-Damper Mesh
W artykule przedstawiono rozwiązanie problemu śledzenia trajektorii przez grupę robotów kołowych w środowisku bez przeszkód. Śledzenie trajektorii rozumiane jest jako podążanie za punktem odniesienia przez geometryczny środek grupy, wraz z...
- Open Access
- 21 April 2023
- Published by Springer Nature in International Journal of Dynamics and Control
- Vol. 11 (6) , 3000-3015
Obstacle avoidance of a wheeled robotic swarm using virtual spring-damper mesh
Swarm robotics, in which groups of robots coordinate to achieve a common goal, has the potential to revolutionize a wide range of industries. However, one of the key challenges in developing effective swarm systems is enabling the robots to navigate around obstacles while maintaining cohesion. In this article, the problem of trajectory tracking for a self-organized swarm of wheeled robots in the shape of a regular polygon operating in an environment with obstacles is addressed. The goal is for the swarm to follow a reference point by the geometric center of the swarm, while avoiding collision with obstacles and maintaining a given distance between neighboring robots and the reference point. To solve this problem, a method based on virtual forces that act on each individual robot in the swarm is proposed. These virtual forces are derived from virtual spring-damper connections acting from the obstacles, adjacent robots, and the reference point. The virtual forces allow the robots to dynamically adjust their trajectories to avoid obstacles and maintain the shape of the swarm. The proposed approach is evaluated through simulation and experiment with a swarm of two-wheeled robots. During the experiment the maximum deviation of inter-robot distances was equal to 0.08 m. With the set limit distance to obstacles equal to 0.2 m, from which virtual forces start to push the robot away from the edge of the obstacle, the shortest distance to obstacles was 0.11 m. The results demonstrate the effectiveness of the method in enabling the swarm to accurately follow the reference point while avoiding obstacles and maintaining the desired distances between robots. Overall, the approach represents a step forward in the development of virtual force-based algorithms for obstacle avoidance in swarm robotics.
- 21 April 2023
- Published by Springer Nature in International Journal of Dynamics and Control
- Vol. 11 (6) , 3000-3015
Open AccessObstacle avoidance of a wheeled robotic swarm using virtual spring-damper mesh
Swarm robotics, in which groups of robots coordinate to achieve a common goal, has the potential to revolutionize a wide range of industries. However, one of the key challenges in developing effective swarm systems is enabling the robots to navigate around obstacles while maintaining cohesion. In this article, the problem of trajectory tracking for a self-organized swarm of wheeled robots in the shape of a regular polygon operating in an environment with obstacles is addressed. The goal is for the swarm to follow a reference point by the geometric center of the swarm, while avoiding collision with obstacles and maintaining a given distance between neighboring robots and the reference point. To solve this problem, a method based on virtual forces that act on each individual robot in the swarm is proposed. These virtual forces are derived from virtual spring-damper connections acting from the obstacles, adjacent robots, and the reference point. The virtual forces allow the robots to dynamically adjust their trajectories to avoid obstacles and maintain the shape of the swarm. The proposed approach is evaluated through simulation and experiment with a swarm of two-wheeled robots. During the experiment the maximum deviation of inter-robot distances was equal to 0.08 m. With the set limit distance to obstacles equal to 0.2 m, from which virtual forces start to push the robot away from the edge of the obstacle, the shortest distance to obstacles was 0.11 m. The results demonstrate the effectiveness of the method in enabling the swarm to accurately follow the reference point while avoiding obstacles and maintaining the desired distances between robots. Overall, the approach represents a step forward in the development of virtual force-based algorithms for obstacle avoidance in swarm robotics.
- Open Access
- 1 March 2023
- Published by Institute of Advanced Engineering and Science in IAES International Journal of Robotics and Automation (IJRA)
- Vol. 12 (1)
Self-organization of a wheeled robotic swarm using virtual spring-damper mesh
The article analyzes the problem of self-organization of randomly placed wheeled robots around a stationary reference point, into a given shape of a regular polygon. The paper gives an answer to the question how virtual forces from virtual spring-damper connections between robots allow self-organization of the swarm into the desired shape. The presented method of control is described in detail with the description of i-th robot dynamics and tested numerically and experimentally. The swarm's self-organization is aimed at moving randomly spaced robots with a random frame orientation to a given distance to a reference point, reaching and maintaining a given distance between neighboring robots. The paper presents the results of numerical tests and experimental research and ends with discussion and conclusions. The paper's results could be expanded for applications related to spacial distribution of mobile robots.
- 1 March 2023
- Published by Institute of Advanced Engineering and Science in IAES International Journal of Robotics and Automation (IJRA)
- Vol. 12 (1)
Open AccessSelf-organization of a wheeled robotic swarm using virtual spring-damper mesh
The article analyzes the problem of self-organization of randomly placed wheeled robots around a stationary reference point, into a given shape of a regular polygon. The paper gives an answer to the question how virtual forces from virtual spring-damper connections between robots allow self-organization of the swarm into the desired shape. The presented method of control is described in detail with the description of i-th robot dynamics and tested numerically and experimentally. The swarm's self-organization is aimed at moving randomly spaced robots with a random frame orientation to a given distance to a reference point, reaching and maintaining a given distance between neighboring robots. The paper presents the results of numerical tests and experimental research and ends with discussion and conclusions. The paper's results could be expanded for applications related to spacial distribution of mobile robots.
- 30 April 2021
- Published by Springer Nature
- p. 209-218
Robotic Swarm Shape Control Based on Virtual Viscoelastic Chain
- 30 April 2021
- Published by Springer Nature
- p. 209-218
Robotic Swarm Shape Control Based on Virtual Viscoelastic Chain