Chao Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Chao Yang has a total of 178 co-authors. Here are the top co-authors by number of shared publications:
- Weida Wang
Beijing Institute of Technology
52 shared publications Weida Wang
32 shared publications- Yuhang Zhang
Beijing Institute of Technology
17 shared publications Changle Xiang
15 shared publicationsLiuquan Yang
14 shared publications- Tianqi Qie
School of Mechanical Engineering, Beijing Institute of Technology, Beijing, China
13 shared publications
Latest Publications
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 75 (9) , 19053-19063
Adaptive MPC-Based Path Following Control for Autonomous Vehicles With Random Time Delays
Autonomous vehicles are further improved with the development of in-vehicle networks and X-by-wire technologies. Due to the increasing integration of vehicle systems and the growing complexity of control links, time delays in information transmission and execution have become increasingly prominent. Because of late responses to control inputs, autonomous vehicles have deterioration in terms of path following accuracy and control stability, which poses a threat to driving safety. To solve this problem, an adaptive model predictive path following control strategy is presented in this paper. Firstly, a real-time delay estimator is designed based on historical feedback information processing and the gradient descent algorithm. Secondly, based on the estimated delay, a delay-augmented model with variable dimension is proposed for adaptive control to mitigate the impact of time-varying delay. Meanwhile, a tube-based model predictive control method is modified for the proposed model to deal with uncertainties generated by time-varying delays. Finally, the proposed control strategy is verified by simulations and experiments in multiple cases. The results show that the proposed strategy achieved a smaller lateral offset than that in the ordinary model predictive control method, leading to a 52.86% improvement in accuracy under the existence of time-varying delays.
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 75 (9) , 19053-19063
Adaptive MPC-Based Path Following Control for Autonomous Vehicles With Random Time Delays
Autonomous vehicles are further improved with the development of in-vehicle networks and X-by-wire technologies. Due to the increasing integration of vehicle systems and the growing complexity of control links, time delays in information transmission and execution have become increasingly prominent. Because of late responses to control inputs, autonomous vehicles have deterioration in terms of path following accuracy and control stability, which poses a threat to driving safety. To solve this problem, an adaptive model predictive path following control strategy is presented in this paper. Firstly, a real-time delay estimator is designed based on historical feedback information processing and the gradient descent algorithm. Secondly, based on the estimated delay, a delay-augmented model with variable dimension is proposed for adaptive control to mitigate the impact of time-varying delay. Meanwhile, a tube-based model predictive control method is modified for the proposed model to deal with uncertainties generated by time-varying delays. Finally, the proposed control strategy is verified by simulations and experiments in multiple cases. The results show that the proposed strategy achieved a smaller lateral offset than that in the ordinary model predictive control method, leading to a 52.86% improvement in accuracy under the existence of time-varying delays.
- 21 August 2026
- Published by Elsevier in Journal of Cleaner Production
- Vol. 575
Power-demand-informed robust power coordination for series hybrid electric vehicles with prescribed-performance constraints
- 21 August 2026
- Published by Elsevier in Journal of Cleaner Production
- Vol. 575
Power-demand-informed robust power coordination for series hybrid electric vehicles with prescribed-performance constraints
- Open Access
- 2 August 2026
- Published by Elsevier in SSRN Electronic Journal
Dynamic-Response-Aware Hybrid Electric Energy Systems Parameter Matching via Two-Stage Multi-Fidelity NSGA-II
Hybrid electric energy systems (HEES), as efficient and clean solutions, have become increasingly popular and are widely used in ground vehicles and aircraft applications. Parameter matching (PM) is critical to HEES, as it fundamentally dictates the achievable levels of reliability, performance, and economy. Current PM methods inherit from traditional single-power-source powertrains, focusing on power and energy boundaries, but neglecting HEES dynamic characteristics. This induces power-supply mismatches under high-dynamic conditions such as vehicle acceleration or aircraft attitude adjustment, causing bus voltage and engine speed fluctuations, thereby degrading powertrain power output performance. To address this, a dynamic-response-aware PM via a two-stage multi-fidelity NSGA-II is proposed. First, a frequency-domain hierarchical power allocation mechanism is introduced, breaking static limitations. The mechanism utilizes component frequency response differences to overcome single time-scale constraints, achieving precise synergy between system-level management and component-level specifications. Second, dynamic equivalent models are developed, replacing ideal-source assumptions. The models accurately capture transient nonlinear characteristics, correcting static deviations for high-fidelity optimization. Third, the two-stage multi-fidelity NSGA-II framework is established, enhancing optimization efficiency. The framework combines global coarse screening with local refined search, ensuring engineering accuracy while solving the trade-off between computational cost and optimization quality in high-dimensional problems. As a result, with dynamic models and frequency-domain power allocation, the proposed method reduces power errors by 6.8% and 7.7% and decreases bus-level RMS and peak errors by 7.3% and 11.5%. Lower battery lifecycle costs by 12.4% are achieved, while the optimized framework cuts runtime and computation costs by 46.8% and 40.3%.
- 2 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessDynamic-Response-Aware Hybrid Electric Energy Systems Parameter Matching via Two-Stage Multi-Fidelity NSGA-II
Hybrid electric energy systems (HEES), as efficient and clean solutions, have become increasingly popular and are widely used in ground vehicles and aircraft applications. Parameter matching (PM) is critical to HEES, as it fundamentally dictates the achievable levels of reliability, performance, and economy. Current PM methods inherit from traditional single-power-source powertrains, focusing on power and energy boundaries, but neglecting HEES dynamic characteristics. This induces power-supply mismatches under high-dynamic conditions such as vehicle acceleration or aircraft attitude adjustment, causing bus voltage and engine speed fluctuations, thereby degrading powertrain power output performance. To address this, a dynamic-response-aware PM via a two-stage multi-fidelity NSGA-II is proposed. First, a frequency-domain hierarchical power allocation mechanism is introduced, breaking static limitations. The mechanism utilizes component frequency response differences to overcome single time-scale constraints, achieving precise synergy between system-level management and component-level specifications. Second, dynamic equivalent models are developed, replacing ideal-source assumptions. The models accurately capture transient nonlinear characteristics, correcting static deviations for high-fidelity optimization. Third, the two-stage multi-fidelity NSGA-II framework is established, enhancing optimization efficiency. The framework combines global coarse screening with local refined search, ensuring engineering accuracy while solving the trade-off between computational cost and optimization quality in high-dimensional problems. As a result, with dynamic models and frequency-domain power allocation, the proposed method reduces power errors by 6.8% and 7.7% and decreases bus-level RMS and peak errors by 7.3% and 11.5%. Lower battery lifecycle costs by 12.4% are achieved, while the optimized framework cuts runtime and computation costs by 46.8% and 40.3%.
- Open Access
- 1 August 2026
- Published by KEAI Publishing in Chinese Journal of Mechanical Engineering
A Novel Trajectory Tracking Method with a Dual-Loop Framework for Low-altitude Heavy-lift Aircraft
- 1 August 2026
- Published by KEAI Publishing in Chinese Journal of Mechanical Engineering
Open AccessA Novel Trajectory Tracking Method with a Dual-Loop Framework for Low-altitude Heavy-lift Aircraft
- Open Access
- 15 July 2026
- Published by Elsevier in SSRN Electronic Journal
Dynamic-Response-Aware Hybrid Electric Energy Systems Parameter Matching via Two-Stage Multi-Fidelity NSGA-II
Hybrid electric energy systems (HEES), as efficient and clean solutions, have become increasingly popular and are widely used in ground vehicles and aircraft applications. Parameter matching (PM) is critical to HEES, as it fundamentally dictates the achievable levels of reliability, performance, and economy. Current PM methods inherit from traditional single-power-source powertrains, focusing on power and energy boundaries, but neglecting HEES dynamic characteristics. This induces power-supply mismatches under high-dynamic conditions such as vehicle acceleration or aircraft attitude adjustment, causing bus voltage and engine speed fluctuations, thereby degrading powertrain power output performance. To address this, a dynamic-response-aware PM via a two-stage multi-fidelity NSGA-II is proposed. First, a frequency-domain hierarchical power allocation mechanism is introduced, breaking static limitations. The mechanism utilizes component frequency response differences to overcome single time-scale constraints, achieving precise synergy between system-level management and component-level specifications. Second, dynamic equivalent models are developed, replacing ideal-source assumptions. The models accurately capture transient nonlinear characteristics, correcting static deviations for high-fidelity optimization. Third, the two-stage multi-fidelity NSGA-II framework is established, enhancing optimization efficiency. The framework combines global coarse screening with local refined search, ensuring engineering accuracy while solving the trade-off between computational cost and optimization quality in high-dimensional problems. As a result, with dynamic models and frequency-domain power allocation, the proposed method reduces power errors by 6.8% and 7.7% and decreases bus-level RMS and peak errors by 7.3% and 11.5%. Lower battery lifecycle costs by 12.4% are achieved, while the optimized framework cuts runtime and computation costs by 46.8% and 40.3%.
- 15 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessDynamic-Response-Aware Hybrid Electric Energy Systems Parameter Matching via Two-Stage Multi-Fidelity NSGA-II
Hybrid electric energy systems (HEES), as efficient and clean solutions, have become increasingly popular and are widely used in ground vehicles and aircraft applications. Parameter matching (PM) is critical to HEES, as it fundamentally dictates the achievable levels of reliability, performance, and economy. Current PM methods inherit from traditional single-power-source powertrains, focusing on power and energy boundaries, but neglecting HEES dynamic characteristics. This induces power-supply mismatches under high-dynamic conditions such as vehicle acceleration or aircraft attitude adjustment, causing bus voltage and engine speed fluctuations, thereby degrading powertrain power output performance. To address this, a dynamic-response-aware PM via a two-stage multi-fidelity NSGA-II is proposed. First, a frequency-domain hierarchical power allocation mechanism is introduced, breaking static limitations. The mechanism utilizes component frequency response differences to overcome single time-scale constraints, achieving precise synergy between system-level management and component-level specifications. Second, dynamic equivalent models are developed, replacing ideal-source assumptions. The models accurately capture transient nonlinear characteristics, correcting static deviations for high-fidelity optimization. Third, the two-stage multi-fidelity NSGA-II framework is established, enhancing optimization efficiency. The framework combines global coarse screening with local refined search, ensuring engineering accuracy while solving the trade-off between computational cost and optimization quality in high-dimensional problems. As a result, with dynamic models and frequency-domain power allocation, the proposed method reduces power errors by 6.8% and 7.7% and decreases bus-level RMS and peak errors by 7.3% and 11.5%. Lower battery lifecycle costs by 12.4% are achieved, while the optimized framework cuts runtime and computation costs by 46.8% and 40.3%.
- Open Access
- 7 July 2026
- Published by Elsevier in SSRN Electronic Journal
Dynamic-Response-Aware Hybrid Electric Energy Systems Parameter Matching via Two-Stage Multi-Fidelity NSGA-II
Hybrid electric energy systems (HEES), as efficient and clean solutions, have become increasingly popular and are widely used in ground vehicles and aircraft applications. Parameter matching (PM) is critical to HEES, as it fundamentally dictates the achievable levels of reliability, performance, and economy. Current PM methods inherit from traditional single-power-source powertrains, focusing on power and energy boundaries, but neglecting HEES dynamic characteristics. This induces power-supply mismatches under high-dynamic conditions such as vehicle acceleration or aircraft attitude adjustment, causing bus voltage and engine speed fluctuations, thereby degrading powertrain power output performance. To address this, a dynamic-response-aware PM via a two-stage multi-fidelity NSGA-II is proposed. First, a frequency-domain hierarchical power allocation mechanism is introduced, breaking static limitations. The mechanism utilizes component frequency response differences to overcome single time-scale constraints, achieving precise synergy between system-level management and component-level specifications. Second, dynamic equivalent models are developed, replacing ideal-source assumptions. The models accurately capture transient nonlinear characteristics, correcting static deviations for high-fidelity optimization. Third, the two-stage multi-fidelity NSGA-II framework is established, enhancing optimization efficiency. The framework combines global coarse screening with local refined search, ensuring engineering accuracy while solving the trade-off between computational cost and optimization quality in high-dimensional problems. As a result, with dynamic models and frequency-domain power allocation, the proposed method reduces power errors by 6.8% and 7.7% and decreases bus-level RMS and peak errors by 7.3% and 11.5%. Lower battery lifecycle costs by 12.4% are achieved, while the optimized framework cuts runtime and computation costs by 46.8% and 40.3%.
- 7 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessDynamic-Response-Aware Hybrid Electric Energy Systems Parameter Matching via Two-Stage Multi-Fidelity NSGA-II
Hybrid electric energy systems (HEES), as efficient and clean solutions, have become increasingly popular and are widely used in ground vehicles and aircraft applications. Parameter matching (PM) is critical to HEES, as it fundamentally dictates the achievable levels of reliability, performance, and economy. Current PM methods inherit from traditional single-power-source powertrains, focusing on power and energy boundaries, but neglecting HEES dynamic characteristics. This induces power-supply mismatches under high-dynamic conditions such as vehicle acceleration or aircraft attitude adjustment, causing bus voltage and engine speed fluctuations, thereby degrading powertrain power output performance. To address this, a dynamic-response-aware PM via a two-stage multi-fidelity NSGA-II is proposed. First, a frequency-domain hierarchical power allocation mechanism is introduced, breaking static limitations. The mechanism utilizes component frequency response differences to overcome single time-scale constraints, achieving precise synergy between system-level management and component-level specifications. Second, dynamic equivalent models are developed, replacing ideal-source assumptions. The models accurately capture transient nonlinear characteristics, correcting static deviations for high-fidelity optimization. Third, the two-stage multi-fidelity NSGA-II framework is established, enhancing optimization efficiency. The framework combines global coarse screening with local refined search, ensuring engineering accuracy while solving the trade-off between computational cost and optimization quality in high-dimensional problems. As a result, with dynamic models and frequency-domain power allocation, the proposed method reduces power errors by 6.8% and 7.7% and decreases bus-level RMS and peak errors by 7.3% and 11.5%. Lower battery lifecycle costs by 12.4% are achieved, while the optimized framework cuts runtime and computation costs by 46.8% and 40.3%.
- Open Access
An Augmented Deep Koopman Operator-Based MPC for Steering Control of High-Speed Electric Tracked Vehicles
With advances in electric drive technology, electric tracked vehicles (ETVs) have emerged as a promising solution for high-mobility ground vehicles. However, under high-speed steering conditions, the equivalent motor load inertia varies significantly, introducing strong nonlinear and time-varying characteristics into the ETV that may induce lateral instability and even rollover. To address this issue, a novel augmented deep Koopman operator-based model predictive control (ADK-MPC) method is proposed. First, a high-order sliding-mode (HOSM) observer is designed to estimate the lumped load disturbances associated with the time-varying equivalent motor load inertia. Then, the estimated disturbances are introduced as an augmented state into the DK operator to construct a data-driven augmented model. The proposed model transforms the nonlinear dynamics into a lifted linear time-invariant representation in the augmented-state space while capturing the dominant nonlinear characteristics. Based on the ADK model, an ADK-MPC controller is developed to convert the nonlinear optimization problem into a quadratic programming problem, thereby improving steering stability and reducing computational complexity. Simulation results under steering conditions indicate that the proposed method achieves better yaw rate tracking and lower computational cost than nonlinear MPC. The yaw rate tracking error is reduced by 45.5%, while the average solving time is shortened by 11.7%.
Open AccessAn Augmented Deep Koopman Operator-Based MPC for Steering Control of High-Speed Electric Tracked Vehicles
With advances in electric drive technology, electric tracked vehicles (ETVs) have emerged as a promising solution for high-mobility ground vehicles. However, under high-speed steering conditions, the equivalent motor load inertia varies significantly, introducing strong nonlinear and time-varying characteristics into the ETV that may induce lateral instability and even rollover. To address this issue, a novel augmented deep Koopman operator-based model predictive control (ADK-MPC) method is proposed. First, a high-order sliding-mode (HOSM) observer is designed to estimate the lumped load disturbances associated with the time-varying equivalent motor load inertia. Then, the estimated disturbances are introduced as an augmented state into the DK operator to construct a data-driven augmented model. The proposed model transforms the nonlinear dynamics into a lifted linear time-invariant representation in the augmented-state space while capturing the dominant nonlinear characteristics. Based on the ADK model, an ADK-MPC controller is developed to convert the nonlinear optimization problem into a quadratic programming problem, thereby improving steering stability and reducing computational complexity. Simulation results under steering conditions indicate that the proposed method achieves better yaw rate tracking and lower computational cost than nonlinear MPC. The yaw rate tracking error is reduced by 45.5%, while the average solving time is shortened by 11.7%.
- Open Access
Physics-Informed Predictive Energy Management Strategy for HEVs Using Kalman-Enhanced Transformer
Predictive energy management strategies (PEMSs) have attracted increasing attention in hybrid electric vehicles (HEVs) for improving fuel economy and powertrain efficiency using anticipated driving information. For PEMS, data-driven velocity prediction is widely used to capture complex driving patterns from historical trajectories and future traffic priors, but often lacks kinematic awareness, leading to physical causality violations and long-horizon state drift. To address these issues, this paper proposes a physics-informed PEMS, where a Physics-Informed Spatio-Temporal Network (PI-STN) provides control-oriented velocity information for an MPC-based energy management controller. Specifically, to address pseudo-motion in velocity prediction under standstill conditions, a global zero-speed gating mechanism is introduced; to suppress acceleration/deceleration trends that violate vehicle kinematic causality, a causal penalty is designed; and to mitigate temporal phase misalignment between data-driven predictions and physical motion priors, a Differentiable Kalman Filter (DKF) is incorporated. At each receding horizon step, the PI-STN-predicted velocity sequence is converted into future power demand through longitudinal vehicle dynamics and used by MPC for engine–battery power allocation under SOC and engine transient constraints. Under the same tested conditions, the proposed strategy reduces engine power fluctuation by 15.1% compared with BiLSTM-Transformer, and achieves an equivalent fuel consumption of 323.74 g, outperforming Transformer-KF by 3.12%.
Open AccessPhysics-Informed Predictive Energy Management Strategy for HEVs Using Kalman-Enhanced Transformer
Predictive energy management strategies (PEMSs) have attracted increasing attention in hybrid electric vehicles (HEVs) for improving fuel economy and powertrain efficiency using anticipated driving information. For PEMS, data-driven velocity prediction is widely used to capture complex driving patterns from historical trajectories and future traffic priors, but often lacks kinematic awareness, leading to physical causality violations and long-horizon state drift. To address these issues, this paper proposes a physics-informed PEMS, where a Physics-Informed Spatio-Temporal Network (PI-STN) provides control-oriented velocity information for an MPC-based energy management controller. Specifically, to address pseudo-motion in velocity prediction under standstill conditions, a global zero-speed gating mechanism is introduced; to suppress acceleration/deceleration trends that violate vehicle kinematic causality, a causal penalty is designed; and to mitigate temporal phase misalignment between data-driven predictions and physical motion priors, a Differentiable Kalman Filter (DKF) is incorporated. At each receding horizon step, the PI-STN-predicted velocity sequence is converted into future power demand through longitudinal vehicle dynamics and used by MPC for engine–battery power allocation under SOC and engine transient constraints. Under the same tested conditions, the proposed strategy reduces engine power fluctuation by 15.1% compared with BiLSTM-Transformer, and achieves an equivalent fuel consumption of 323.74 g, outperforming Transformer-KF by 3.12%.