Ahmad Shahir Saleh
Research Subjects
Ahmad Shahir Saleh has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Maxwell Azuka Meju
Applied Geophysics Group, Lulea University of Technology, SE-97187 LuleƄ
9 shared publications A B Karpiah
PETRONAS Carigali , Kuala Lumpur 50088
2 shared publications- Federico Miorelli
CGG Multi-Physics Imaging, Milan 20133, Italy.
2 shared publications J H W Kho
PETRONAS Carigali , Kuala Lumpur 50088
2 shared publicationsR V Miller
Geoscience Australia , Canberra ACT 2601 ; previously at PETRONAS Carigali
2 shared publications- Randall L. Mackie
CGG Multi-Physics Imaging 3 , Milan 20133, Italy
2 shared publications
Latest Publications
- Open Access
- 7 October 2024
- Published byĀ Oxford University Press (OUP)Ā inĀ Geophysical Journal International
- Vol.Ā 239 Ā (3) , 1879-1899
Upper mantle flow and crustal deformation patterns beneath the Dangerous Grounds and Borneo where multiple plates converge in South China Sea revealed by 3-D anisotropic magnetotelluric imaging
SUMMARY: A large-scale magnetotelluric (MT) study was carried out in offshore Borneo to understand the lithospheric structure in this geologically complex region where three tectonic plates converge and past crustal studies generated long-standing debates. Marine MT data were acquired at 1416 stations with 3 km spacing along 13 regional lines (covering 4677 line-km) with periodicities of 0.1 to 10 000 s. These were inverted in 3-D incorporating electrical anisotropy with cross-gradients constraints between vertical and horizontal resistivities and the results were validated with resistivity well-logs from several exploration wells. The models reveal widespread presence of electrically resistive upper crustal and uppermost mantle layers, each underlain by a laterally varying conductive and anisotropic layer. The geometries of the anisotropic layers suggest large-scale ductile flow, thrusting and folding forming belts of alternating deep roots and thin lithosphere, consistent with multiple underthrusting/subduction. Our results are in agreement with the seismologically detected lithospheric variations in northern Borneo suggesting onshoreāoffshore continuity and a common lithosphericāasthenospheric origin for the deformation patterns. Over thinned lithosphere, we found consistent low resistivity and high anisotropy anomalies in the mantle above the spatial locations of fast shear-wave bodies imaged by recent seismological workers which we interpret to indicate post-subduction lithosphericāasthenospheric ductile flow in response to multidirectional regional compression. We demonstrate that these zones are spatially correlated with the distribution of mainly Cretaceous ophiolitic rocks and melanges exposed onshore and suggest that serpentinization of mantle peridotite can explain some of the anisotropic conductivity anomalies. The taper zones of these deep anisotropic conductors are also associated with Neogene sub-basins, high thermal gradients, and intrasedimentary magmatic bodies indicating a link between lithospheric thinning and magmatism. We propose that such anomalies could be important pathfinders for geothermal and natural hydrogen systems in the ongoing global drive for carbon-free energy resources.
- 7 October 2024
- Published byĀ Oxford University Press (OUP)Ā inĀ Geophysical Journal International
- Vol.Ā 239 Ā (3) , 1879-1899
Open AccessUpper mantle flow and crustal deformation patterns beneath the Dangerous Grounds and Borneo where multiple plates converge in South China Sea revealed by 3-D anisotropic magnetotelluric imaging
SUMMARY: A large-scale magnetotelluric (MT) study was carried out in offshore Borneo to understand the lithospheric structure in this geologically complex region where three tectonic plates converge and past crustal studies generated long-standing debates. Marine MT data were acquired at 1416 stations with 3 km spacing along 13 regional lines (covering 4677 line-km) with periodicities of 0.1 to 10 000 s. These were inverted in 3-D incorporating electrical anisotropy with cross-gradients constraints between vertical and horizontal resistivities and the results were validated with resistivity well-logs from several exploration wells. The models reveal widespread presence of electrically resistive upper crustal and uppermost mantle layers, each underlain by a laterally varying conductive and anisotropic layer. The geometries of the anisotropic layers suggest large-scale ductile flow, thrusting and folding forming belts of alternating deep roots and thin lithosphere, consistent with multiple underthrusting/subduction. Our results are in agreement with the seismologically detected lithospheric variations in northern Borneo suggesting onshoreāoffshore continuity and a common lithosphericāasthenospheric origin for the deformation patterns. Over thinned lithosphere, we found consistent low resistivity and high anisotropy anomalies in the mantle above the spatial locations of fast shear-wave bodies imaged by recent seismological workers which we interpret to indicate post-subduction lithosphericāasthenospheric ductile flow in response to multidirectional regional compression. We demonstrate that these zones are spatially correlated with the distribution of mainly Cretaceous ophiolitic rocks and melanges exposed onshore and suggest that serpentinization of mantle peridotite can explain some of the anisotropic conductivity anomalies. The taper zones of these deep anisotropic conductors are also associated with Neogene sub-basins, high thermal gradients, and intrasedimentary magmatic bodies indicating a link between lithospheric thinning and magmatism. We propose that such anomalies could be important pathfinders for geothermal and natural hydrogen systems in the ongoing global drive for carbon-free energy resources.
- 27 December 2023
- Published byĀ Society of Exploration GeophysicistsĀ inĀ Geophysics
- Vol.Ā 89 Ā (1) , B17-B30
Deep structural controls on the distribution of carbonate reservoirs and overburden heterogeneity in Central Luconia province, offshore Borneo revealed by 3D anisotropic inversion of regional controlled-source electromagnetic and magnetotelluric profile data
- 27 December 2023
- Published byĀ Society of Exploration GeophysicistsĀ inĀ Geophysics
- Vol.Ā 89 Ā (1) , B17-B30
Deep structural controls on the distribution of carbonate reservoirs and overburden heterogeneity in Central Luconia province, offshore Borneo revealed by 3D anisotropic inversion of regional controlled-source electromagnetic and magnetotelluric profile data
- 19 July 2023
- Published byĀ Society of Exploration GeophysicistsĀ inĀ Geophysics
- Vol.Ā 88 Ā (6) , B329-B341
Seismic-electromagnetic projection attribute: Application in integrating seismic quantitative interpretation and 3D controlled-source electromagnetic-magnetotelluric broadband data inversion for robust ranking and sweet spotting of hydrocarbon prospects in offshore northwest Borneo
We introduce a new seismic-electromagnetic (EM) projection (SEMP) attribute to improve the characterization of pay sands by integrating seismic P impedance and S impedance with electrical resistivity measurements leveraging on the high sensitivity of resistivity to fluid saturation and the capability of seismic data to delineate thin beds. Porosity is predicted using an extended elastic impedance (EEI) approach to reduce the risk of encountering SEMP anomalies related to low porosity. First, we determine the seismic-EM integration concept using well logs from a well that encountered hydrocarbons in a deepwater fold belt in offshore Borneo. The SEMP logs supported by the EEI log successfully delineate the pay zones in the well. Second, we extend the approach in three dimensions and evaluate its effectiveness using large-size seismic controlled-source EM (CSEM) and magnetotelluric (MT) data from the same area. The seismic data are inverted to produce P- and S-impedance volumes. EEI volume calibrated to total porosity also is produced. We then perform 3D anisotropic cross-gradient joint CSEM and MT inversion of a large-size survey comprising 647 receivers with receiver spacing of 1.5ā3 km at prospect to regional scale. The SEMP volumes computed using the seismic and CSEM-MT inversion results are then interpreted with the EEI volume to identify possible geobodies of pay sand. Resistive geobodies with low porosity are assigned higher risks because they are likely due to compaction rather than hydrocarbon presence, whereas geobodies with high porosity are assigned lower risks and identified as potential sweet spots. The geobodies need to be corroborated with independent geologic studies to mature them into exploration prospects and assess their associated risk and potential. Although a vertical transverse isotropy approximation is used in our CSEM-MT study, the SEMP concept also is applicable to cases considering tilted transverse isotropy or arbitrary anisotropy where available and operational for such large-size exploration data.
- 19 July 2023
- Published byĀ Society of Exploration GeophysicistsĀ inĀ Geophysics
- Vol.Ā 88 Ā (6) , B329-B341
Seismic-electromagnetic projection attribute: Application in integrating seismic quantitative interpretation and 3D controlled-source electromagnetic-magnetotelluric broadband data inversion for robust ranking and sweet spotting of hydrocarbon prospects in offshore northwest Borneo
We introduce a new seismic-electromagnetic (EM) projection (SEMP) attribute to improve the characterization of pay sands by integrating seismic P impedance and S impedance with electrical resistivity measurements leveraging on the high sensitivity of resistivity to fluid saturation and the capability of seismic data to delineate thin beds. Porosity is predicted using an extended elastic impedance (EEI) approach to reduce the risk of encountering SEMP anomalies related to low porosity. First, we determine the seismic-EM integration concept using well logs from a well that encountered hydrocarbons in a deepwater fold belt in offshore Borneo. The SEMP logs supported by the EEI log successfully delineate the pay zones in the well. Second, we extend the approach in three dimensions and evaluate its effectiveness using large-size seismic controlled-source EM (CSEM) and magnetotelluric (MT) data from the same area. The seismic data are inverted to produce P- and S-impedance volumes. EEI volume calibrated to total porosity also is produced. We then perform 3D anisotropic cross-gradient joint CSEM and MT inversion of a large-size survey comprising 647 receivers with receiver spacing of 1.5ā3 km at prospect to regional scale. The SEMP volumes computed using the seismic and CSEM-MT inversion results are then interpreted with the EEI volume to identify possible geobodies of pay sand. Resistive geobodies with low porosity are assigned higher risks because they are likely due to compaction rather than hydrocarbon presence, whereas geobodies with high porosity are assigned lower risks and identified as potential sweet spots. The geobodies need to be corroborated with independent geologic studies to mature them into exploration prospects and assess their associated risk and potential. Although a vertical transverse isotropy approximation is used in our CSEM-MT study, the SEMP concept also is applicable to cases considering tilted transverse isotropy or arbitrary anisotropy where available and operational for such large-size exploration data.
- Open Access
Using Large-Size Three-Dimensional Marine Electromagnetic Data for the Efficient Combined Investigation of Natural Hydrogen and Hydrocarbon Gas Reservoirs: A Geologically Consistent and Process-Oriented Approach with Implications for Carbon Footprint Reduction
The recycling or burial of carbon dioxide in depleted petroleum reservoirs and re-imagining exploration strategies that focus on hydrogen reservoirs (with any associated hydrocarbon gas as the upside potential) are a necessity in todayās environmental and geopolitical climate. Given that geologic hydrogen and hydrocarbon gases may occur in the same or different reservoirs, there will be gains in efficiency when searching for both resources together since they share some commonalities, but there is no geophysical workflow available yet for this purpose. Three-dimensional (3D) marine controlled-source electromagnetic (CSEM) and magnetotelluric (MT) methods provide valuable information on rock-and-fluid variations in the subsurface and can be used to investigate hydrogen and hydrocarbon reservoirs, source rocks, and the migration pathways of contrasting resistivity relative to the host rock. In this paper, a process-oriented CSEM-MT workflow is proposed for the efficient combined investigation of reservoir hydrocarbon and hydrogen within a play-based exploration and production framework that emphasizes carbon footprint reduction. It has the following challenging elements: finding the right basin (and block), selecting the right prospect, drilling the right well, and exploiting the opportunities for sustainability and CO2 recycling or burial in the appropriate reservoirs. Recent methodological developments that integrate 3D CSEM-MT imaging into the appropriate structural constraints to derive the geologically robust models necessary for resolving these challenges and their extension to reservoir monitoring are described. Instructive case studies are revisited, showing how 3D CSEM-MT models facilitate the interpretation of resistivity information in terms of the key elements of geological prospect evaluation (presence of source rocks, migration and charge, reservoir rock, and trap and seal) and understanding how deep geological processes control the distribution and charging of potential hydrocarbon, geothermal, and hydrogen reservoirs. In particular, evidence is provided that deep crustal resistivity imaging can map serpentinized ultramafic rocks (possible source rocks for hydrogen) in offshore northwest Borneo and can be combined with seismic reflection data to map vertical fluid migration pathways and their barrier (or seal), as exemplified by the subhorizontal detachment zones in Eocene shale in the Mexican Ridges fold belt of the southwest of the Gulf of Mexico, raising the possibility of using integrated geophysical methods to map hydrogen kitchens in different terrains. The methodological advancements and new combined investigative workflow provide a way for improved resource mapping and monitoring and, hence, a technology that could play a critical role in helping the world reach net-zero emissions by 2050.
Open AccessUsing Large-Size Three-Dimensional Marine Electromagnetic Data for the Efficient Combined Investigation of Natural Hydrogen and Hydrocarbon Gas Reservoirs: A Geologically Consistent and Process-Oriented Approach with Implications for Carbon Footprint Reduction
The recycling or burial of carbon dioxide in depleted petroleum reservoirs and re-imagining exploration strategies that focus on hydrogen reservoirs (with any associated hydrocarbon gas as the upside potential) are a necessity in todayās environmental and geopolitical climate. Given that geologic hydrogen and hydrocarbon gases may occur in the same or different reservoirs, there will be gains in efficiency when searching for both resources together since they share some commonalities, but there is no geophysical workflow available yet for this purpose. Three-dimensional (3D) marine controlled-source electromagnetic (CSEM) and magnetotelluric (MT) methods provide valuable information on rock-and-fluid variations in the subsurface and can be used to investigate hydrogen and hydrocarbon reservoirs, source rocks, and the migration pathways of contrasting resistivity relative to the host rock. In this paper, a process-oriented CSEM-MT workflow is proposed for the efficient combined investigation of reservoir hydrocarbon and hydrogen within a play-based exploration and production framework that emphasizes carbon footprint reduction. It has the following challenging elements: finding the right basin (and block), selecting the right prospect, drilling the right well, and exploiting the opportunities for sustainability and CO2 recycling or burial in the appropriate reservoirs. Recent methodological developments that integrate 3D CSEM-MT imaging into the appropriate structural constraints to derive the geologically robust models necessary for resolving these challenges and their extension to reservoir monitoring are described. Instructive case studies are revisited, showing how 3D CSEM-MT models facilitate the interpretation of resistivity information in terms of the key elements of geological prospect evaluation (presence of source rocks, migration and charge, reservoir rock, and trap and seal) and understanding how deep geological processes control the distribution and charging of potential hydrocarbon, geothermal, and hydrogen reservoirs. In particular, evidence is provided that deep crustal resistivity imaging can map serpentinized ultramafic rocks (possible source rocks for hydrogen) in offshore northwest Borneo and can be combined with seismic reflection data to map vertical fluid migration pathways and their barrier (or seal), as exemplified by the subhorizontal detachment zones in Eocene shale in the Mexican Ridges fold belt of the southwest of the Gulf of Mexico, raising the possibility of using integrated geophysical methods to map hydrogen kitchens in different terrains. The methodological advancements and new combined investigative workflow provide a way for improved resource mapping and monitoring and, hence, a technology that could play a critical role in helping the world reach net-zero emissions by 2050.
- 14 March 2023
- Published byĀ Oxford University Press (OUP)Ā inĀ Geophysical Journal International
- Vol.Ā 234 Ā (2) , 1032-1050
Three-dimensional anisotropic inversion and electrostratigraphic imaging of marine magnetotelluric data to understand the control of crustal deformations by pre-existing lithospheric structures in the Mexican Ridges Fold belt, Southwestern Gulf of Mexico
SUMMARY: 3-D imaging of the lithosphere in the Mexican Ridges fold belt is important for understanding how the crustal deformations in this basin relate to deep tectonic processes and structures inherited from extinct Jurassic seafloor spreading. Here, we use broad-band (0.0001ā0.4642 Hz) marine magnetotelluric data from the basin to reconstruct the 3-D anisotropic resistivities of the lithosphere and their spatial gradients. The resistivity gradients maxima enabled independent definition of important geological boundaries (seen on collocated seismic reflection data) and estimation of crustal thickness. We found anomalous layered zones of low resistivity and high electrical anisotropy at 5ā8 km depth (coinciding with the regional detachment zone in Eocene shales in 3-D seismic data) and in the upper mantle which we interpret as indicating intense deformation and/or recent magmatic influence. We also found a banded crystalline basement structure across the fossil spreading centre comprising WSWāENE trending, 6ā10 km wide, electrically resistive subvertical sheets with conductive and anisotropic borders, which merge into a basal resistive stock-like body at 15ā20 km depth. These are cut or bounded by later NNW trending major faults. These WSW and NNW structural trends correlate with the previously interpreted transform and normal faults that formed during the Late Jurassic opening of the Gulf of Mexico only if rotated clockwise by 25ā30°. Surprisingly, the rugged thrust-related seabed is offset at the projected positions of the steep resistive-conductive basement sheets (which also have spatially coincident high magnetic intensity and seismicity) enabling us to infer they represent magmatic intrusions facilitated by pre-existing faults. Their conductive borders spatially coincide with possibly fluid-filled vertical fracture-sets in the overlying sediments seen in seismic data which we interpret as hydrothermal fluid pathways. We infer that a magmatic body recently intruded our study area, its ascent controlled by pre-existing basement structures, and influenced the deformation of the Neogene sequences and the seafloor topography.
- 14 March 2023
- Published byĀ Oxford University Press (OUP)Ā inĀ Geophysical Journal International
- Vol.Ā 234 Ā (2) , 1032-1050
Three-dimensional anisotropic inversion and electrostratigraphic imaging of marine magnetotelluric data to understand the control of crustal deformations by pre-existing lithospheric structures in the Mexican Ridges Fold belt, Southwestern Gulf of Mexico
SUMMARY: 3-D imaging of the lithosphere in the Mexican Ridges fold belt is important for understanding how the crustal deformations in this basin relate to deep tectonic processes and structures inherited from extinct Jurassic seafloor spreading. Here, we use broad-band (0.0001ā0.4642 Hz) marine magnetotelluric data from the basin to reconstruct the 3-D anisotropic resistivities of the lithosphere and their spatial gradients. The resistivity gradients maxima enabled independent definition of important geological boundaries (seen on collocated seismic reflection data) and estimation of crustal thickness. We found anomalous layered zones of low resistivity and high electrical anisotropy at 5ā8 km depth (coinciding with the regional detachment zone in Eocene shales in 3-D seismic data) and in the upper mantle which we interpret as indicating intense deformation and/or recent magmatic influence. We also found a banded crystalline basement structure across the fossil spreading centre comprising WSWāENE trending, 6ā10 km wide, electrically resistive subvertical sheets with conductive and anisotropic borders, which merge into a basal resistive stock-like body at 15ā20 km depth. These are cut or bounded by later NNW trending major faults. These WSW and NNW structural trends correlate with the previously interpreted transform and normal faults that formed during the Late Jurassic opening of the Gulf of Mexico only if rotated clockwise by 25ā30°. Surprisingly, the rugged thrust-related seabed is offset at the projected positions of the steep resistive-conductive basement sheets (which also have spatially coincident high magnetic intensity and seismicity) enabling us to infer they represent magmatic intrusions facilitated by pre-existing faults. Their conductive borders spatially coincide with possibly fluid-filled vertical fracture-sets in the overlying sediments seen in seismic data which we interpret as hydrothermal fluid pathways. We infer that a magmatic body recently intruded our study area, its ascent controlled by pre-existing basement structures, and influenced the deformation of the Neogene sequences and the seafloor topography.
- 17 May 2022
- Published byĀ Society of Exploration GeophysicistsĀ inĀ Geophysics
- Vol.Ā 87 Ā (5) , E279-E290
Use of structure-guided 3D controlled-source electromagnetic inversion to map karst features in carbonates in offshore northwest Borneo
Fractured and/or karstic carbonates (FKCs) in the subsurface are commonly associated with significant drilling risk or reservoir effectiveness issues. Understanding the distribution of karsts will help avoid drilling into possible voids and also reassess risks associated with reservoir effectiveness. A 2020 3D seismic acquisition in offshore northwest Borneo provided data for identifying new carbonate prospects and an opportunity to revisit a 2010 marine controlled-source electromagnetic (CSEM) survey that was not designed specifically for FKC mapping but can serve to test new inversion capability for imaging karsted carbonate bodies. A 3D CSEM data were used to detect and characterize the nature (i.e., fractured and/or karsted) of carbonate prospects mapped using 3D seismic data. In one approach, structure tensors computed from these seismic data were used to constrain the 3D CSEM inversion on the Azure cloud platform. In another approach, cross gradients between vertical and horizontal resistivities were used as a structural guide obviating the need for seismic data. The resulting anisotropic resistivity models were validated using resistivity logs from a nearby well; the resistivity results matched the well-logs satisfactorily, providing geologic justification to interpret the presence of karst features in the resistivity volumes. Lateral boundary of the carbonate prospects was mapped based on the resistivity characteristic, in seismic- and nonseismic-guided structure-coupled inversion. Resistivity-depth cross section of the area revealed the presence of resistivity discontinuity at the seismic-inferred boundary of the main carbonate prospect. Also, resistivity depth slices of the models clearly demonstrated that the areal distribution of low and high resistive zones can be mapped and useful deductions such as the presence of FKC and basement characteristics can be made using the 3D inversion of the CSEM data.
- 17 May 2022
- Published byĀ Society of Exploration GeophysicistsĀ inĀ Geophysics
- Vol.Ā 87 Ā (5) , E279-E290
Use of structure-guided 3D controlled-source electromagnetic inversion to map karst features in carbonates in offshore northwest Borneo
Fractured and/or karstic carbonates (FKCs) in the subsurface are commonly associated with significant drilling risk or reservoir effectiveness issues. Understanding the distribution of karsts will help avoid drilling into possible voids and also reassess risks associated with reservoir effectiveness. A 2020 3D seismic acquisition in offshore northwest Borneo provided data for identifying new carbonate prospects and an opportunity to revisit a 2010 marine controlled-source electromagnetic (CSEM) survey that was not designed specifically for FKC mapping but can serve to test new inversion capability for imaging karsted carbonate bodies. A 3D CSEM data were used to detect and characterize the nature (i.e., fractured and/or karsted) of carbonate prospects mapped using 3D seismic data. In one approach, structure tensors computed from these seismic data were used to constrain the 3D CSEM inversion on the Azure cloud platform. In another approach, cross gradients between vertical and horizontal resistivities were used as a structural guide obviating the need for seismic data. The resulting anisotropic resistivity models were validated using resistivity logs from a nearby well; the resistivity results matched the well-logs satisfactorily, providing geologic justification to interpret the presence of karst features in the resistivity volumes. Lateral boundary of the carbonate prospects was mapped based on the resistivity characteristic, in seismic- and nonseismic-guided structure-coupled inversion. Resistivity-depth cross section of the area revealed the presence of resistivity discontinuity at the seismic-inferred boundary of the main carbonate prospect. Also, resistivity depth slices of the models clearly demonstrated that the areal distribution of low and high resistive zones can be mapped and useful deductions such as the presence of FKC and basement characteristics can be made using the 3D inversion of the CSEM data.
- 29 January 2022
- Published byĀ Oxford University Press (OUP)Ā inĀ Geophysical Journal International
- Vol.Ā 230 Ā (1) , 464-479
Optimization of seismic-guided 3-D marine magnetotelluric imaging in a complex fold-thrust belt setting in NW Borneo, Malaysia
SUMMARY: The use of seismic-derived structure tensor to guide the inversion of non-seismic data has been gaining increasing attention because of its ability to constrain the inversion result to honour structural information from seismic reflectivity. While the cross-gradient method has been recently adapted to this problem, there is a need to further examine how the choice of the various regularization weighting factors and the design of the starting model impact the image-guided results. In this paper focused on marine magnetotellurics (MT), we study several practical aspects of seismic-guided electromagnetic (EM) inversion to see on what can be improved from the current practice. We then show practical examples of how the cross-gradient method can be applied to get a more geologically pleasing model that fits the data. We also show that there are subjective choices in how to effectively apply the method. First, using a field-realistic synthetic model, we established what would be the suitable regularization weights in the vertical and horizontal directions. Secondly, for the actual 3-D survey data, we compared the use of structure tensors derived from anisotropic pre-stack depth migration (APSDM) reflectivity, high-fidelity full-waveform inversion (FWI) velocity and acoustic impedance inversion volumes to guide cross-gradient anisotropic resistivity inversion with initial half-space resistivity starting models. We determined post-facto the optimum structure tensor weights using well logs as the ground truth. We found that the initial model built using horizon-based interpolated resistivity logs from multiple wells in the anisotropic inversion guided with seismic FWI velocity gave the best match to well logs as compared to the other options. However, given that resistivity logs from multiple wells may not always be available for a robust initial model construction in frontier exploration, we suggest that the structure tensor from APSDM reflectivity data is still preferred since the APSDM reflectivity data have well-defined structural information.
- 29 January 2022
- Published byĀ Oxford University Press (OUP)Ā inĀ Geophysical Journal International
- Vol.Ā 230 Ā (1) , 464-479
Optimization of seismic-guided 3-D marine magnetotelluric imaging in a complex fold-thrust belt setting in NW Borneo, Malaysia
SUMMARY: The use of seismic-derived structure tensor to guide the inversion of non-seismic data has been gaining increasing attention because of its ability to constrain the inversion result to honour structural information from seismic reflectivity. While the cross-gradient method has been recently adapted to this problem, there is a need to further examine how the choice of the various regularization weighting factors and the design of the starting model impact the image-guided results. In this paper focused on marine magnetotellurics (MT), we study several practical aspects of seismic-guided electromagnetic (EM) inversion to see on what can be improved from the current practice. We then show practical examples of how the cross-gradient method can be applied to get a more geologically pleasing model that fits the data. We also show that there are subjective choices in how to effectively apply the method. First, using a field-realistic synthetic model, we established what would be the suitable regularization weights in the vertical and horizontal directions. Secondly, for the actual 3-D survey data, we compared the use of structure tensors derived from anisotropic pre-stack depth migration (APSDM) reflectivity, high-fidelity full-waveform inversion (FWI) velocity and acoustic impedance inversion volumes to guide cross-gradient anisotropic resistivity inversion with initial half-space resistivity starting models. We determined post-facto the optimum structure tensor weights using well logs as the ground truth. We found that the initial model built using horizon-based interpolated resistivity logs from multiple wells in the anisotropic inversion guided with seismic FWI velocity gave the best match to well logs as compared to the other options. However, given that resistivity logs from multiple wells may not always be available for a robust initial model construction in frontier exploration, we suggest that the structure tensor from APSDM reflectivity data is still preferred since the APSDM reflectivity data have well-defined structural information.
- 1 November 2020
- Published byĀ Society of Exploration GeophysicistsĀ inĀ Interpretation
- Vol.Ā 8 Ā (4) , SS1-SS13
Seismic image-guided 3D inversion of marine controlled-source electromagnetic and magnetotelluric data
Geologic interpretation of resistivity models from marine controlled-source electromagnetic (CSEM) and magnetotelluric (MT) data for hydrocarbon exploration and reservoir monitoring can be problematic due to structural complexity and low-resistivity contrasts in sedimentary units typically found in new frontier areas. It is desirable to reconstruct 3D resistivity structures that are consistent with seismic images and geologic expectations of the subsurface to reduce uncertainty in the evaluation of petroleum ventures. Structural similarity is achieved by promoting a cross-gradient constraint between external seismically derived gradient fields and the inversion resistivity model. The gradient fields come from coherency weighted structure tensors computed directly from the seismic volume. Consequently, structural similarity is obtained without the requirement for any horizon interpretation or picking, thus significantly reducing the complexity and effort. We have determined the effectiveness of this approach using CSEM, MT, and seismic data from a structurally complex fold-thrust belt in offshore northwest Borneo.
- 1 November 2020
- Published byĀ Society of Exploration GeophysicistsĀ inĀ Interpretation
- Vol.Ā 8 Ā (4) , SS1-SS13
Seismic image-guided 3D inversion of marine controlled-source electromagnetic and magnetotelluric data
Geologic interpretation of resistivity models from marine controlled-source electromagnetic (CSEM) and magnetotelluric (MT) data for hydrocarbon exploration and reservoir monitoring can be problematic due to structural complexity and low-resistivity contrasts in sedimentary units typically found in new frontier areas. It is desirable to reconstruct 3D resistivity structures that are consistent with seismic images and geologic expectations of the subsurface to reduce uncertainty in the evaluation of petroleum ventures. Structural similarity is achieved by promoting a cross-gradient constraint between external seismically derived gradient fields and the inversion resistivity model. The gradient fields come from coherency weighted structure tensors computed directly from the seismic volume. Consequently, structural similarity is obtained without the requirement for any horizon interpretation or picking, thus significantly reducing the complexity and effort. We have determined the effectiveness of this approach using CSEM, MT, and seismic data from a structurally complex fold-thrust belt in offshore northwest Borneo.
- 25 July 2019
- Published byĀ Society of Exploration GeophysicistsĀ inĀ Geophysics
- Vol.Ā 84 Ā (6) , E387-E402
Structurally tailored 3D anisotropic controlled-source electromagnetic resistivity inversion with cross-gradient criterion and simultaneous model calibration
Geologic interpretation of 3D anisotropic resistivity models from conventional marine controlled-source electromagnetic (CSEM) data inversion faces difficulties in low-resistivity contrast sediments and structurally complex environments that typify the new frontiers for hydrocarbon exploration. Currently, the typically reconstructed horizontal resistivity Ļh and vertical resistivity Ļv models often have conflicting depth structures that are difficult to explain in terms of subsurface geology, and the resulting resistivities may not be close to the true formation resistivities required for estimating reservoir parameters. We have investigated the concept that an objective geologically oriented or structurally tailored inversion can be achieved by requiring that the cross-product of the gradient of horizontal resistivity and the gradient of the vertical resistivity is equal to zero at significant geologic boundaries. We incorporate this boundary-shape criterion in our 3D inverse problem formulations, implemented within nonlinear model-space and conjugate-gradient contexts, for cases in which a priori calibration data from wells and/or seismically derived subsurface boundaries are available and for cases in which these are lacking. The resulting fit-for-purpose solutions serve to better analyze the peculiarity of a given data set. We applied these algorithms to synthetic and field CSEM data sets representing a fold-thrust environment with low-resistivity and low-contrast sediments. The resulting Ļh and Ļv models from cross-gradient joint inversion of synthetic data of appropriate frequency bandwidth without a priori information are structurally similar and consistent with the test models, whereas those from the inversions of band-limited field data are consistent with the available seismic and resistivity well-log data. This particular approach will thus be useful for lithologic correlation in frontier regions with limited a priori information using broadband CSEM data. For these band-limited field data, we found that the anisotropic bulk resistivities of the low-contrast sediments are better determined by incorporating a priori calibration data from triaxial resistivity logs and seismic horizons.
- 25 July 2019
- Published byĀ Society of Exploration GeophysicistsĀ inĀ Geophysics
- Vol.Ā 84 Ā (6) , E387-E402
Structurally tailored 3D anisotropic controlled-source electromagnetic resistivity inversion with cross-gradient criterion and simultaneous model calibration
Geologic interpretation of 3D anisotropic resistivity models from conventional marine controlled-source electromagnetic (CSEM) data inversion faces difficulties in low-resistivity contrast sediments and structurally complex environments that typify the new frontiers for hydrocarbon exploration. Currently, the typically reconstructed horizontal resistivity Ļh and vertical resistivity Ļv models often have conflicting depth structures that are difficult to explain in terms of subsurface geology, and the resulting resistivities may not be close to the true formation resistivities required for estimating reservoir parameters. We have investigated the concept that an objective geologically oriented or structurally tailored inversion can be achieved by requiring that the cross-product of the gradient of horizontal resistivity and the gradient of the vertical resistivity is equal to zero at significant geologic boundaries. We incorporate this boundary-shape criterion in our 3D inverse problem formulations, implemented within nonlinear model-space and conjugate-gradient contexts, for cases in which a priori calibration data from wells and/or seismically derived subsurface boundaries are available and for cases in which these are lacking. The resulting fit-for-purpose solutions serve to better analyze the peculiarity of a given data set. We applied these algorithms to synthetic and field CSEM data sets representing a fold-thrust environment with low-resistivity and low-contrast sediments. The resulting Ļh and Ļv models from cross-gradient joint inversion of synthetic data of appropriate frequency bandwidth without a priori information are structurally similar and consistent with the test models, whereas those from the inversions of band-limited field data are consistent with the available seismic and resistivity well-log data. This particular approach will thus be useful for lithologic correlation in frontier regions with limited a priori information using broadband CSEM data. For these band-limited field data, we found that the anisotropic bulk resistivities of the low-contrast sediments are better determined by incorporating a priori calibration data from triaxial resistivity logs and seismic horizons.
- 1 August 2018
- Published byĀ Society of Exploration GeophysicistsĀ inĀ Interpretation
- Vol.Ā 6 Ā (3) , SG49-SG57
Workflow for improvement of 3D anisotropic CSEM resistivity inversion and integration with seismic using cross-gradient constraint to reduce exploration risk in a complex fold-thrust belt in offshore northwest Borneo
The focus of hydrocarbon exploration has now moved into frontier regions where structural complexity, heterogeneous overburden, and hydrocarbon system fundamentals are significant challenges requiring an integrated exploration approach. Three-dimensional controlled-source electromagnetic (CSEM) anisotropic resistivity imaging is emerging as a technique to combine with seismic imaging in such regions. However, the typically reconstructed horizontal resistivity [ ] and vertical resistivity [ ] models often have conflicting depth structures that are difficult to explain in terms of subsurface geology. It is highly desirable to reduce ambiguity or subjectivity in depth interpretation of [ ] and [ ] models and also achieve comparability with other coincidentally located subsurface models. We have developed a workflow for integrating information from seismic well-based inversion, interpreted seismic horizons, and resistivity well logs in a cross-gradient-guided simultaneous 3D CSEM inversion for geologically realistic [ ] and [ ] models whose parameter estimates for a selected reservoir interval can then be better optimized to aid reservoir characterization. We developed our workflow using exploration data from a complex fold-thrust belt. We found that the integrated cross-gradient approach led to [ ] and [ ] models that have a common depth structure, are consistent with seismic and resistivity logs, and are hence less ambiguous for geologic interpretation and reservoir parameter estimation.
- 1 August 2018
- Published byĀ Society of Exploration GeophysicistsĀ inĀ Interpretation
- Vol.Ā 6 Ā (3) , SG49-SG57
Workflow for improvement of 3D anisotropic CSEM resistivity inversion and integration with seismic using cross-gradient constraint to reduce exploration risk in a complex fold-thrust belt in offshore northwest Borneo
The focus of hydrocarbon exploration has now moved into frontier regions where structural complexity, heterogeneous overburden, and hydrocarbon system fundamentals are significant challenges requiring an integrated exploration approach. Three-dimensional controlled-source electromagnetic (CSEM) anisotropic resistivity imaging is emerging as a technique to combine with seismic imaging in such regions. However, the typically reconstructed horizontal resistivity [ ] and vertical resistivity [ ] models often have conflicting depth structures that are difficult to explain in terms of subsurface geology. It is highly desirable to reduce ambiguity or subjectivity in depth interpretation of [ ] and [ ] models and also achieve comparability with other coincidentally located subsurface models. We have developed a workflow for integrating information from seismic well-based inversion, interpreted seismic horizons, and resistivity well logs in a cross-gradient-guided simultaneous 3D CSEM inversion for geologically realistic [ ] and [ ] models whose parameter estimates for a selected reservoir interval can then be better optimized to aid reservoir characterization. We developed our workflow using exploration data from a complex fold-thrust belt. We found that the integrated cross-gradient approach led to [ ] and [ ] models that have a common depth structure, are consistent with seismic and resistivity logs, and are hence less ambiguous for geologic interpretation and reservoir parameter estimation.