Mugdha Kshirsagar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mugdha Kshirsagar has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
Aroushi Bhagwat
2 shared publications- Pratima Vitthal Kalokhe
Department of Civil Engineering, Pimpri Chinchwad College of Engineering, Nigdi, Pune 411044, India
2 shared publications - Shailendra Pandurang Banne
Department of Civil Engineering, Pimpri Chinchwad College of Engineering, Pune, India
2 shared publications Sonal Waghmare
2 shared publications- Abhijit Date
School of Engineering, RMIT University, Melbourne, VIC 3000, Australia
1 shared publication - Ahmed Abdel Khalek Ebid
Future University in Egypt, Cairo, Egypt
1 shared publication
Latest Publications
- Open Access
Solar-Assisted Direct Contact Membrane Sustainable Distillation for Desalination: An Integrated Bibliometric and Critical Review
Increasing freshwater scarcity has intensified the need for energy-efficient and sustainable desalination technologies, making solar-assisted Direct Contact Membrane Distillation (DCMD) an attractive solution due to its low-temperature operation, high salt rejection, and compatibility with renewable energy. The PRISMA 2020 framework was used to systematically review and analyze the literature published on Scopus during the period 1974–2026 from a bibliometric and critical technical perspective. The study combines bibliometric analysis with critical analysis of technological development to investigate the development of solar-assisted DCMD and its use for sustainable production of freshwater, which was not incorporated in previous reviews. The analysis identifies rapid research momentum since 2017, with China, the USA, Saudi Arabia, Australia and Turkey being major contributors, and shows how the research focus has shifted to include the use of membrane materials, integration with renewable energy, fouling prevention, temperature polarization and energy efficiency. Significant advances have been made, yet commercialization is severely hampered by wetting of membranes, thermal losses, and low numbers of pilot-scale validations and inadequate standardized testing of performance. The review highlights the major research gaps and future directions, such as the development of advanced membrane materials and advanced hybrid renewable energy systems, the use of artificial intelligence (AI) for process optimization, conducting a comprehensive techno-economic and life-cycle assessment, and pilot-scale demonstration over a long duration. The results offer a comprehensive plan for the further development of solar-assisted DCMD for reliable and sustainable water production.
Open AccessSolar-Assisted Direct Contact Membrane Sustainable Distillation for Desalination: An Integrated Bibliometric and Critical Review
Increasing freshwater scarcity has intensified the need for energy-efficient and sustainable desalination technologies, making solar-assisted Direct Contact Membrane Distillation (DCMD) an attractive solution due to its low-temperature operation, high salt rejection, and compatibility with renewable energy. The PRISMA 2020 framework was used to systematically review and analyze the literature published on Scopus during the period 1974–2026 from a bibliometric and critical technical perspective. The study combines bibliometric analysis with critical analysis of technological development to investigate the development of solar-assisted DCMD and its use for sustainable production of freshwater, which was not incorporated in previous reviews. The analysis identifies rapid research momentum since 2017, with China, the USA, Saudi Arabia, Australia and Turkey being major contributors, and shows how the research focus has shifted to include the use of membrane materials, integration with renewable energy, fouling prevention, temperature polarization and energy efficiency. Significant advances have been made, yet commercialization is severely hampered by wetting of membranes, thermal losses, and low numbers of pilot-scale validations and inadequate standardized testing of performance. The review highlights the major research gaps and future directions, such as the development of advanced membrane materials and advanced hybrid renewable energy systems, the use of artificial intelligence (AI) for process optimization, conducting a comprehensive techno-economic and life-cycle assessment, and pilot-scale demonstration over a long duration. The results offer a comprehensive plan for the further development of solar-assisted DCMD for reliable and sustainable water production.
- 17 June 2026
- Published by Springer Nature in Innovative Infrastructure Solutions
- Vol. 11 (7)
Geotechnical behaviour of laterite soil stabilized with cellulose and chitosan biopolymers: a comparative study
- 17 June 2026
- Published by Springer Nature in Innovative Infrastructure Solutions
- Vol. 11 (7)
Geotechnical behaviour of laterite soil stabilized with cellulose and chitosan biopolymers: a comparative study
- Open Access
- 30 April 2026
- Published by International Information and Engineering Technology Association in Revue des composites et des matériaux avancés
- Vol. 36 (2) , 385-394
Sustainable Pervious Concrete: Enhancing Performance with Recycled Waste Materials
- 30 April 2026
- Published by International Information and Engineering Technology Association in Revue des composites et des matériaux avancés
- Vol. 36 (2) , 385-394
Open AccessSustainable Pervious Concrete: Enhancing Performance with Recycled Waste Materials
- Open Access
- 1 January 2026
- Published by GN1 Sistemas e Publicacoes Ltd. in ITEGAM-Journal of Engineering and Technology for Industrial Applications (ITEGAM-JETIA)
- Vol. 12 (61) , 576-589
Prediction of Compaction Properties in Biopolymer-Stabilized Laterite Soils Using Artificial Neural Network
Biopolymers like xanthan gum, guar gum, cellulose, and chitosan, in varying proportions, can be used to stabilize weak laterite soil. By enhancing the soil's strength, resistance to erosion, and durability, these biopolymers improve its mechanical properties. This study presents artificial neural networks (ANN) to develop predictive models for estimating the Maximum Dry Density (MDD) and Optimum Moisture Content (OMC) of biopolymer-stabilized laterite soil, with model predictions validated against experimental results. The incorporation of various biopolymers particularly xanthan gum, guar gum, cellulose, and chitosan significantly improves the compaction characteristics of laterite soil, with notable increases in Maximum Dry Density (up to 27.46%) and varied effects on Optimum Moisture Content, depending on the biopolymer type and concentration. A previously made available database was utilized to develop the prediction models. The correlation coefficient (R-value) was employed as the standard for acceptable performance in neural network development. The ANN-based prediction model for MDD (R = 0.941) demonstrates the strongest correlation and best model fit. In comparison, the OMC model shows a slightly lower yet still commendable level of accuracy (R = 0.925).
- 1 January 2026
- Published by GN1 Sistemas e Publicacoes Ltd. in ITEGAM-Journal of Engineering and Technology for Industrial Applications (ITEGAM-JETIA)
- Vol. 12 (61) , 576-589
Open AccessPrediction of Compaction Properties in Biopolymer-Stabilized Laterite Soils Using Artificial Neural Network
Biopolymers like xanthan gum, guar gum, cellulose, and chitosan, in varying proportions, can be used to stabilize weak laterite soil. By enhancing the soil's strength, resistance to erosion, and durability, these biopolymers improve its mechanical properties. This study presents artificial neural networks (ANN) to develop predictive models for estimating the Maximum Dry Density (MDD) and Optimum Moisture Content (OMC) of biopolymer-stabilized laterite soil, with model predictions validated against experimental results. The incorporation of various biopolymers particularly xanthan gum, guar gum, cellulose, and chitosan significantly improves the compaction characteristics of laterite soil, with notable increases in Maximum Dry Density (up to 27.46%) and varied effects on Optimum Moisture Content, depending on the biopolymer type and concentration. A previously made available database was utilized to develop the prediction models. The correlation coefficient (R-value) was employed as the standard for acceptable performance in neural network development. The ANN-based prediction model for MDD (R = 0.941) demonstrates the strongest correlation and best model fit. In comparison, the OMC model shows a slightly lower yet still commendable level of accuracy (R = 0.925).
- Open Access
- 31 October 2025
- Published by International Information and Engineering Technology Association in Revue des composites et des matériaux avancés
- Vol. 35 (05) , 909-923
Impact of Biopolymers on the Mechanical and Durability Properties of Concrete: A Comprehensive Review
- 31 October 2025
- Published by International Information and Engineering Technology Association in Revue des composites et des matériaux avancés
- Vol. 35 (05) , 909-923
Open AccessImpact of Biopolymers on the Mechanical and Durability Properties of Concrete: A Comprehensive Review
- 29 October 2025
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 51 (4) , 4007-4029
Microbially Induced Calcite Precipitation: A Critical Review on a Sustainable Method for Improving Expansive Soil in the Era of Climate Change
- 29 October 2025
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 51 (4) , 4007-4029
Microbially Induced Calcite Precipitation: A Critical Review on a Sustainable Method for Improving Expansive Soil in the Era of Climate Change
- Open Access
- 28 October 2025
- Published by Springer Nature in Journal of Umm Al-Qura University for Engineering and Architecture
- Vol. 17 (2) , 1-21
Impacts of microplastics in soils due to connected built environments, identification challenges, and regulating policies: A ComprehensiveReview
- 28 October 2025
- Published by Springer Nature in Journal of Umm Al-Qura University for Engineering and Architecture
- Vol. 17 (2) , 1-21
Open AccessImpacts of microplastics in soils due to connected built environments, identification challenges, and regulating policies: A ComprehensiveReview
- Open Access
- 18 February 2025
- Published by MDPI AG in Biomimetics
- Vol. 10 (2) , 122
Biomimicry-Based Design of Underground Cold Storage Facilities: Energy Efficiency and Sustainability
Underground cold storage gives rise to special challenges that require innovative solutions to ensure maximum energy efficiency. Conventional energy systems tend to be based on high energy use, so sustainable solutions are crucial. This study explores the novel idea of biomimetics and how it might be used in the planning and building of underground cold storage facilities as well as other infrastructure projects. Biomimetic strategies, inspired by termite mounds, gentoo penguin feathers, and beehive structures, are applied to minimize reliance on energy-intensive cooling systems. These natural models offer efficient thermal regulation, airflow optimization, and passive cooling mechanisms such as geothermal energy harvesting. The integration of naturally driven convection and ventilation ensures stable internal temperatures under varying conditions. Biomimicry was employed in Revit Architecture, coupled with structural optimization, to eliminate urban space’s limitations and further increase energy efficiency. The analytical work for this paper utilized a set of formulas that represent heat flow, thermal resistance, R-value, thermal transmittance, U-value, solar absorption, and G-value. The results pointed to very good insulation, with exterior walls having an R-value of 10.2 m2K/W and U-value of 0.98 W/m2K. Among the chosen 3-layer ETFE cushion with a U-value of 1.96 W/m2K, with a G-value of 0.50, showed good heat regulation and daylight management. Furthermore, bagasse-cement composites with a very low thermal conductivity of 0.10–0.30 W/m·K provided good insulation. This research proposes a scalable and sustainable approach in the design of underground cold storage by merging modelling based on Revit with thermal simulations. Biomimicry has been demonstrated to have the potential for changing subterranean infrastructure, conserving energy consumption, and creating eco-friendly construction practices.
- 18 February 2025
- Published by MDPI AG in Biomimetics
- Vol. 10 (2) , 122
Open AccessBiomimicry-Based Design of Underground Cold Storage Facilities: Energy Efficiency and Sustainability
Underground cold storage gives rise to special challenges that require innovative solutions to ensure maximum energy efficiency. Conventional energy systems tend to be based on high energy use, so sustainable solutions are crucial. This study explores the novel idea of biomimetics and how it might be used in the planning and building of underground cold storage facilities as well as other infrastructure projects. Biomimetic strategies, inspired by termite mounds, gentoo penguin feathers, and beehive structures, are applied to minimize reliance on energy-intensive cooling systems. These natural models offer efficient thermal regulation, airflow optimization, and passive cooling mechanisms such as geothermal energy harvesting. The integration of naturally driven convection and ventilation ensures stable internal temperatures under varying conditions. Biomimicry was employed in Revit Architecture, coupled with structural optimization, to eliminate urban space’s limitations and further increase energy efficiency. The analytical work for this paper utilized a set of formulas that represent heat flow, thermal resistance, R-value, thermal transmittance, U-value, solar absorption, and G-value. The results pointed to very good insulation, with exterior walls having an R-value of 10.2 m2K/W and U-value of 0.98 W/m2K. Among the chosen 3-layer ETFE cushion with a U-value of 1.96 W/m2K, with a G-value of 0.50, showed good heat regulation and daylight management. Furthermore, bagasse-cement composites with a very low thermal conductivity of 0.10–0.30 W/m·K provided good insulation. This research proposes a scalable and sustainable approach in the design of underground cold storage by merging modelling based on Revit with thermal simulations. Biomimicry has been demonstrated to have the potential for changing subterranean infrastructure, conserving energy consumption, and creating eco-friendly construction practices.