Lekkaiyan Baskaran Thamil Amudhu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lekkaiyan Baskaran Thamil Amudhu has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Esther Florence Sundarsingh
Anna University
5 shared publications - Vimal Samsingh Ramalingam
Sri Sivasubramaniya Nadar College of Engineering
5 shared publications - Arun Prakash Chandran
Madras Institute of Technology
2 shared publications - Sakthi Abirami Balakrishnan
Department of Electronics and Communication Engineering, Sri Sivasubramaniya Nadar College of Engineering, Chennai, India
2 shared publications Ramalingam Vimal Samsingh
Sri Sivasubramaniya Nadar College of Engineering
1 shared publicationShivani Sathyanarayan
Department of Mechanical Engineering, Sri Sivasubramaniya Nadar College of Engineering, Chennai, India
1 shared publication
Latest Publications
- Open Access
- 29 May 2025
- Published by Kaunas University of Technology (KTU) in Materials Science
- Vol. 32 (2) , 236-240
Mechanical and Microwave Absorption Properties of Exfoliated Graphite and Manganese Ferrite Nanoparticles on Polyvinylidene Fluoride Thin Films
This study presents a simple and efficient method for the development of thin polymer composite films for use in absorbing electromagnetic waves at X-band frequencies. The thin film composites were fabricated by solution casting technique by incorporating the exfoliated graphite, and manganese ferrite nanoparticles into the polyvinylidene fluoride matrix. The composite film consisting of both 3 wt.% of MnFe2O4 and exfoliated graphite/PVDF showed better absorption properties and achieved a minimum reflection loss of –30.54 at 9.62 GHz in the 8 – 12 GHz frequency range. This synergistic effect of the film was attributed to its β-phase formation, multiple-reflection-absorption effect, and the conduction of fillers at their interfaces. Finally, the mechanical and absorption characteristics of the fabricated thin film composites were also investigated. The results indicated that these composite films hold potential for use in microwave absorption applications in the X band.
- 29 May 2025
- Published by Kaunas University of Technology (KTU) in Materials Science
- Vol. 32 (2) , 236-240
Open AccessMechanical and Microwave Absorption Properties of Exfoliated Graphite and Manganese Ferrite Nanoparticles on Polyvinylidene Fluoride Thin Films
This study presents a simple and efficient method for the development of thin polymer composite films for use in absorbing electromagnetic waves at X-band frequencies. The thin film composites were fabricated by solution casting technique by incorporating the exfoliated graphite, and manganese ferrite nanoparticles into the polyvinylidene fluoride matrix. The composite film consisting of both 3 wt.% of MnFe2O4 and exfoliated graphite/PVDF showed better absorption properties and achieved a minimum reflection loss of –30.54 at 9.62 GHz in the 8 – 12 GHz frequency range. This synergistic effect of the film was attributed to its β-phase formation, multiple-reflection-absorption effect, and the conduction of fillers at their interfaces. Finally, the mechanical and absorption characteristics of the fabricated thin film composites were also investigated. The results indicated that these composite films hold potential for use in microwave absorption applications in the X band.
- 19 July 2024
- Published by Wiley in Polymer Composites
- Vol. 45 (16) , 15034-15045
Enhanced microwave absorption and mechanical performance of polyvinylidene fluoride thin films embedded with novel activated carbon and manganese ferrite
Thin composite films hold great promise for microwave devices for microwave absorption. This work mainly focuses on the investigation of the microwave absorption and mechanical studies of a composite thin film of activated carbon and manganese ferrite as conductive fillers within a polyvinylidene fluoride (PVDF) matrix. The production of activated carbon was successfully accomplished using a pyrolysis technique. Composite films consisting of polyvinylidene fluoride (PVDF) and activated carbon‐manganese ferrite were fabricated using a solution blending method. The composite films maintained a consistent concentration of activated carbon at 5 wt%. The characterization of the materials was conducted using scanning electron microscopy and X‐ray diffraction. The composite consists of 3 wt% of MnFe 2 O 4 and 5 wt% Activated carbon/PVDF showed exceptional absorption properties and achieved a minimum reflection loss of around −38 dB at a frequency of 8–12 GHz at a thickness of 2 mm. Significantly, the composite film exhibited a greater tensile strength than the PVDF film. The results of our study highlighted the enhanced microwave absorption and economical manufacturing technique for producing composite films. These films exhibit promising microwave‐absorbing properties in stealth applications. Highlights: A facile strategy to fabricate thin film PVDF composites was proposed. Novel activated carbon was synthesized to enhance the conductivity. Achieved reflection loss of around −38 dB at a frequency of 8–12 GHz. Synergistic effects of fillers enhanced dielectric and magnetic losses. Exhibited efficient mechanical performance and microwave absorption.
- 19 July 2024
- Published by Wiley in Polymer Composites
- Vol. 45 (16) , 15034-15045
Enhanced microwave absorption and mechanical performance of polyvinylidene fluoride thin films embedded with novel activated carbon and manganese ferrite
Thin composite films hold great promise for microwave devices for microwave absorption. This work mainly focuses on the investigation of the microwave absorption and mechanical studies of a composite thin film of activated carbon and manganese ferrite as conductive fillers within a polyvinylidene fluoride (PVDF) matrix. The production of activated carbon was successfully accomplished using a pyrolysis technique. Composite films consisting of polyvinylidene fluoride (PVDF) and activated carbon‐manganese ferrite were fabricated using a solution blending method. The composite films maintained a consistent concentration of activated carbon at 5 wt%. The characterization of the materials was conducted using scanning electron microscopy and X‐ray diffraction. The composite consists of 3 wt% of MnFe 2 O 4 and 5 wt% Activated carbon/PVDF showed exceptional absorption properties and achieved a minimum reflection loss of around −38 dB at a frequency of 8–12 GHz at a thickness of 2 mm. Significantly, the composite film exhibited a greater tensile strength than the PVDF film. The results of our study highlighted the enhanced microwave absorption and economical manufacturing technique for producing composite films. These films exhibit promising microwave‐absorbing properties in stealth applications. Highlights: A facile strategy to fabricate thin film PVDF composites was proposed. Novel activated carbon was synthesized to enhance the conductivity. Achieved reflection loss of around −38 dB at a frequency of 8–12 GHz. Synergistic effects of fillers enhanced dielectric and magnetic losses. Exhibited efficient mechanical performance and microwave absorption.
- 11 January 2024
- Published by Springer Nature in Journal of Inorganic and Organometallic Polymers and Materials
- Vol. 34 (6) , 2366-2377
Performance Assessment of Nanofiber Integrated Polymer Composite as Electromagnetic Wave Absorber
- 11 January 2024
- Published by Springer Nature in Journal of Inorganic and Organometallic Polymers and Materials
- Vol. 34 (6) , 2366-2377
Performance Assessment of Nanofiber Integrated Polymer Composite as Electromagnetic Wave Absorber
- 11 April 2023
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
- Vol. 237 (10) , 2115-2125
Novel radar absorbing material using resistive frequency selective surface based polymer composites for enhanced broadband microwave absorption
In this paper, a novel approach using glass fibre laminate composite (GFLC) with nanoparticle embedded nanofibres and frequency selective surfaces (FSS) for improved electromagnetic (EM) wave absorption has been proposed. For enhanced absorption, the FSS was coated with polyvinylidene fluoride (PVDF) mixed with multi-walled carbon nanotubes (MWCNTs). The coatings were prepared through electrospinning technique. The composite prepared from FSS, PVDF-MWCNT layers and GFLC showed enhanced absorption properties. It was demonstrated that the fabricated composites reduced reflection of electromagnetic waves by the material when compared to metals. An 80% increase in EM absorption (with respect to metal) was observed over a wide frequency range with the novel composite at an overall thickness of only 3 mm. X-ray diffraction (XRD) spectra showed an improvement in the electroactive β-phases in the electrospun PVDF/MWCNTs compared to Plain PVDF. Scanning electron microscopy analysis on various weight percentages of PVDF/MWCNTs revealed the formation of nano fibres with an average diameter of 75–160 nm. In addition, the proposed novel EM wave absorbing composites were of simple configuration and the mechanical properties of the fabricated composites were comparable to that of GFLC. Experimental results indicated that RAS with 0.25 wt % MWCNT/PVDF had 87.5% bandwidth for over 90% absorption from 8.5 to 12 GHz compared to all other configurations. The tailored composite material could be used as excellent radar absorber structures (RAS) and can find tremendous application in the manufacture of stealth aircrafts.
- 11 April 2023
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
- Vol. 237 (10) , 2115-2125
Novel radar absorbing material using resistive frequency selective surface based polymer composites for enhanced broadband microwave absorption
In this paper, a novel approach using glass fibre laminate composite (GFLC) with nanoparticle embedded nanofibres and frequency selective surfaces (FSS) for improved electromagnetic (EM) wave absorption has been proposed. For enhanced absorption, the FSS was coated with polyvinylidene fluoride (PVDF) mixed with multi-walled carbon nanotubes (MWCNTs). The coatings were prepared through electrospinning technique. The composite prepared from FSS, PVDF-MWCNT layers and GFLC showed enhanced absorption properties. It was demonstrated that the fabricated composites reduced reflection of electromagnetic waves by the material when compared to metals. An 80% increase in EM absorption (with respect to metal) was observed over a wide frequency range with the novel composite at an overall thickness of only 3 mm. X-ray diffraction (XRD) spectra showed an improvement in the electroactive β-phases in the electrospun PVDF/MWCNTs compared to Plain PVDF. Scanning electron microscopy analysis on various weight percentages of PVDF/MWCNTs revealed the formation of nano fibres with an average diameter of 75–160 nm. In addition, the proposed novel EM wave absorbing composites were of simple configuration and the mechanical properties of the fabricated composites were comparable to that of GFLC. Experimental results indicated that RAS with 0.25 wt % MWCNT/PVDF had 87.5% bandwidth for over 90% absorption from 8.5 to 12 GHz compared to all other configurations. The tailored composite material could be used as excellent radar absorber structures (RAS) and can find tremendous application in the manufacture of stealth aircrafts.
- 15 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 13 (3) , 444-447
Low-Profile Polymer Composite Radar Absorber Embedded With Frequency Selective Surface
This paper proposed a novel design for a thin, lightweight polymer composite Radar Absorber (RA) with broadband bandwidth in the frequency range 2.8-9.6 GHz. A 3-mm-thick, thin polymer composite structure comprised of glass fiber, epoxy resin, and FSS films was then fabricated using the hand layup process. The β-phase behaviour enhanced polyvinylidene fluoride (PVDF) through electrospinning was deposited on a frequency selective surface (FSS). The PVDF phase structure was evaluated using X-Ray diffraction (XRD). The formation of nanofibers was evaluated by scanning electron microscopy (SEM). A significant increase in the absorption of electromagnetic (EM) waves with a broad operational bandwidth is produced by the addition of FSS to the glass fiber. Experiments were carried out and assessed by comparing the results to numerical models in CST Microwave Studio, indicating that the RA integrated with PVDF coated FSS has an operational bandwidth of 2.8-9.6 GHz and a reflectivity of less than -10dB. Finally, the absorption and mechanical characteristics of the fabricated Radar Absorbing Structure (RAS) was also investigated.
- 15 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 13 (3) , 444-447
Low-Profile Polymer Composite Radar Absorber Embedded With Frequency Selective Surface
This paper proposed a novel design for a thin, lightweight polymer composite Radar Absorber (RA) with broadband bandwidth in the frequency range 2.8-9.6 GHz. A 3-mm-thick, thin polymer composite structure comprised of glass fiber, epoxy resin, and FSS films was then fabricated using the hand layup process. The β-phase behaviour enhanced polyvinylidene fluoride (PVDF) through electrospinning was deposited on a frequency selective surface (FSS). The PVDF phase structure was evaluated using X-Ray diffraction (XRD). The formation of nanofibers was evaluated by scanning electron microscopy (SEM). A significant increase in the absorption of electromagnetic (EM) waves with a broad operational bandwidth is produced by the addition of FSS to the glass fiber. Experiments were carried out and assessed by comparing the results to numerical models in CST Microwave Studio, indicating that the RA integrated with PVDF coated FSS has an operational bandwidth of 2.8-9.6 GHz and a reflectivity of less than -10dB. Finally, the absorption and mechanical characteristics of the fabricated Radar Absorbing Structure (RAS) was also investigated.