Ishan Gupta
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ishan Gupta has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Martin Schanz
Graz Univ. of Technology
3 shared publications - Nina Lorenz
Institute of Physics, Johannes Gutenberg University 1 , 55122 Mainz, Germany
1 shared publication - Thomas Palberg
Institute of Physics, Johannes Gutenberg University, Mainz, Germany
1 shared publication Tim Ricken
Univ. of Stuttgart
1 shared publication- Tim Ricken
Institute of Structural Mechanics and Dynamics in Aerospace Engineering, Faculty of Aerospace Engineering and Geodesy, University of Stuttgart, Stuttgart, Germany
1 shared publication
Latest Publications
- 1 September 2025
- Published by American Society of Civil Engineers (ASCE) in Journal of Engineering Mechanics
- Vol. 151 (9)
Thrombosis Simulation Using a Triphasic Porous Medium Model: Application to Aortic Dissection
- 1 September 2025
- Published by American Society of Civil Engineers (ASCE) in Journal of Engineering Mechanics
- Vol. 151 (9)
Thrombosis Simulation Using a Triphasic Porous Medium Model: Application to Aortic Dissection
- Open Access
Triphasic Thrombosis Model: A Computational Study of Type B Aortic Dissection
Thrombosis refers to the formation of a thrombus, or a blood clot, within the body, which can occur either partially or completely. It serves as a crucial indicator of the severity of a patient’s medical condition, with the location and characteristics of thrombosis dictating its clinical implications. Hence, accurate diagnosis and effective management of thrombosis are paramount. In our current investigation, we incorporate the porous attributes of a thrombus using the Theory of Porous Media. This involves dividing the aggregate into solid, liquid, and nutrient phases and utilising volume fractions to capture microstructural details. Fluid flow through the porous media is modelled using a modified Darcy-Brinkman type equation, with interaction terms within balance equations facilitating the modelling of the mass exchange and other phase interactions. The shorter time scales are neglected. We present a comprehensive framework of equations and assumptions governing the behaviour of a strongly coupled multiphasic porous medium problem. Additionally, we introduce scenarios involving type B Aortic Dissection and false lumen geometries, providing a detailed outline of the problem setup. Thereafter, we present the potential of the model for thrombi growth. The simulation results are compared with velocity plots aligning with Magnetic Resonance Imaging data for three distinct cases with varying entry and exit tear sizes. Consequently, our proposed model offers a promising and reasonable approach for numerically simulating thrombosis and gaining insights into the underlying growth mechanics.
Open AccessTriphasic Thrombosis Model: A Computational Study of Type B Aortic Dissection
Thrombosis refers to the formation of a thrombus, or a blood clot, within the body, which can occur either partially or completely. It serves as a crucial indicator of the severity of a patient’s medical condition, with the location and characteristics of thrombosis dictating its clinical implications. Hence, accurate diagnosis and effective management of thrombosis are paramount. In our current investigation, we incorporate the porous attributes of a thrombus using the Theory of Porous Media. This involves dividing the aggregate into solid, liquid, and nutrient phases and utilising volume fractions to capture microstructural details. Fluid flow through the porous media is modelled using a modified Darcy-Brinkman type equation, with interaction terms within balance equations facilitating the modelling of the mass exchange and other phase interactions. The shorter time scales are neglected. We present a comprehensive framework of equations and assumptions governing the behaviour of a strongly coupled multiphasic porous medium problem. Additionally, we introduce scenarios involving type B Aortic Dissection and false lumen geometries, providing a detailed outline of the problem setup. Thereafter, we present the potential of the model for thrombi growth. The simulation results are compared with velocity plots aligning with Magnetic Resonance Imaging data for three distinct cases with varying entry and exit tear sizes. Consequently, our proposed model offers a promising and reasonable approach for numerically simulating thrombosis and gaining insights into the underlying growth mechanics.
- Open Access
- 17 August 2023
- Published by Springer Nature in Archive of Applied Mechanics
- Vol. 93 (11) , 4107-4123
Modelling growth and formation of thrombi: a multiphasic approach based on the theory of porous media
Aortic dissection (AD) has a high mortality rate. About 40% of the people with type B AD do not live for more than a month. The prognosis of AD is quite challenging. Hence, we present a triphasic model for the formation and growth of thrombi using the theory of porous media (TPM). The whole aggregate is divided into solid, liquid and nutrient constituents. The constituents are assumed to be materially incompressible and isothermal, and the whole aggregate is assumed to be fully saturated. Darcy’s law describes the flow of fluid in the porous media. The regions with thrombi formation are determined using the solid volume fraction. The velocity- and nutrient concentration-induced mass exchange is defined between the nutrient and solid phases. We introduce the set of equations and a numerical example for thrombosis in type B AD. Here we study the effects of different material parameters and boundary conditions. We choose the values that give meaningful results and present the model’s features in agreement with the Virchow triad. The simulations show that the thrombus grows in the low-velocity regions of the blood. We use a realistic 2-d geometry of the false lumen and present the model’s usefulness in actual cases. The proposed model provides a reasonable approach for the numerical simulation of thrombosis.
- 17 August 2023
- Published by Springer Nature in Archive of Applied Mechanics
- Vol. 93 (11) , 4107-4123
Open AccessModelling growth and formation of thrombi: a multiphasic approach based on the theory of porous media
Aortic dissection (AD) has a high mortality rate. About 40% of the people with type B AD do not live for more than a month. The prognosis of AD is quite challenging. Hence, we present a triphasic model for the formation and growth of thrombi using the theory of porous media (TPM). The whole aggregate is divided into solid, liquid and nutrient constituents. The constituents are assumed to be materially incompressible and isothermal, and the whole aggregate is assumed to be fully saturated. Darcy’s law describes the flow of fluid in the porous media. The regions with thrombi formation are determined using the solid volume fraction. The velocity- and nutrient concentration-induced mass exchange is defined between the nutrient and solid phases. We introduce the set of equations and a numerical example for thrombosis in type B AD. Here we study the effects of different material parameters and boundary conditions. We choose the values that give meaningful results and present the model’s features in agreement with the Virchow triad. The simulations show that the thrombus grows in the low-velocity regions of the blood. We use a realistic 2-d geometry of the false lumen and present the model’s usefulness in actual cases. The proposed model provides a reasonable approach for the numerical simulation of thrombosis.
- Open Access
- 15 March 2023
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 158 (11) , 114902
Microstructural diversity, nucleation paths, and phase behavior in binary mixtures of charged colloidal spheres
We study low-salt, binary aqueous suspensions of charged colloidal spheres of size ratio Γ = 0.57, number densities below the eutectic number density nE, and number fractions of p = 1.00–0.40. The typical phase obtained by solidification from a homogeneous shear-melt is a substitutional alloy with a body centered cubic structure. In strictly gas-tight vials, the polycrystalline solid is stable against melting and further phase transformation for extended times. For comparison, we also prepare the same samples by slow, mechanically undisturbed deionization in commercial slit cells. These cells feature a complex but well reproducible sequence of global and local gradients in salt concentration, number density, and composition as induced by successive deionization, phoretic transport, and differential settling of the components, respectively. Moreover, they provide an extended bottom surface suitable for heterogeneous nucleation of the β-phase. We give a detailed qualitative characterization of the crystallization processes using imaging and optical microscopy. By contrast to the bulk samples, the initial alloy formation is not volume-filling, and we now observe also α- and β-phases with low solubility of the odd component. In addition to the initial homogeneous nucleation route, the interplay of gradients opens various further crystallization and transformation pathways leading to a great diversity of microstructures. Upon a subsequent increase in salt concentration, the crystals melt again. Wall-based, pebble-shaped β-phase crystals and facetted α-crystals melt last. Our observations suggest that the substitutional alloys formed in bulk experiments by homogeneous nucleation and subsequent growth are mechanically stable in the absence of solid–fluid interfaces but thermodynamically metastable.
- 15 March 2023
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 158 (11) , 114902
Open AccessMicrostructural diversity, nucleation paths, and phase behavior in binary mixtures of charged colloidal spheres
We study low-salt, binary aqueous suspensions of charged colloidal spheres of size ratio Γ = 0.57, number densities below the eutectic number density nE, and number fractions of p = 1.00–0.40. The typical phase obtained by solidification from a homogeneous shear-melt is a substitutional alloy with a body centered cubic structure. In strictly gas-tight vials, the polycrystalline solid is stable against melting and further phase transformation for extended times. For comparison, we also prepare the same samples by slow, mechanically undisturbed deionization in commercial slit cells. These cells feature a complex but well reproducible sequence of global and local gradients in salt concentration, number density, and composition as induced by successive deionization, phoretic transport, and differential settling of the components, respectively. Moreover, they provide an extended bottom surface suitable for heterogeneous nucleation of the β-phase. We give a detailed qualitative characterization of the crystallization processes using imaging and optical microscopy. By contrast to the bulk samples, the initial alloy formation is not volume-filling, and we now observe also α- and β-phases with low solubility of the odd component. In addition to the initial homogeneous nucleation route, the interplay of gradients opens various further crystallization and transformation pathways leading to a great diversity of microstructures. Upon a subsequent increase in salt concentration, the crystals melt again. Wall-based, pebble-shaped β-phase crystals and facetted α-crystals melt last. Our observations suggest that the substitutional alloys formed in bulk experiments by homogeneous nucleation and subsequent growth are mechanically stable in the absence of solid–fluid interfaces but thermodynamically metastable.