Wenhua Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Wenhua Chen has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Shuo-Cheng Zhang
Department of Rural Safety, China Academy of Safety Science and Technology, Beijing, People’s Republic of China
3 shared publications - Tian Xiang
Engineer School Qinghai Institute of Technology Xining China
2 shared publications Guohui Wang
Ph.D. Candidate, School of Civil Engineering, Beijing Jiaotong Univ., No. 3 Shangyuancun, Beijing 100044, China; Hebei Research Institute of Construction and Geotechnical Investigation Co. Ltd., 58 Jianhua S St., Shijiazhuang 050031, China; Technology Center of Geotechnical Engineering of Hebei Province, 58 Jianhua S St., Shijiazhuang 050031, China
1 shared publication- Menglei Ji
Department of Rural Safety, China Academy of Safety Science and Technology, Beijing, People’s Republic of China
1 shared publication - Qingke Nie
China Hebei Construction & Geotechnical Investigation Group LTD., Shijiazhuang 050227, China
1 shared publication - Ruichen Zheng
Department of Rural Safety, China Academy of Safety Science and Technology, Beijing, People’s Republic of China
1 shared publication
Latest Publications
- 8 November 2025
- Published by Springer Nature in Archive of Applied Mechanics
- Vol. 95 (11) , 1-19
Dynamic response of the tunnel embedded in a saturated frozen half-space with wave functions method
- 8 November 2025
- Published by Springer Nature in Archive of Applied Mechanics
- Vol. 95 (11) , 1-19
Dynamic response of the tunnel embedded in a saturated frozen half-space with wave functions method
- 5 August 2024
- Published by Springer Nature in Journal of Mountain Science
- Vol. 21 (8) , 2844-2854
Frost heaving and crack initiation characteristics of tunnel rock mass in cold regions under low-temperature degradation
- 5 August 2024
- Published by Springer Nature in Journal of Mountain Science
- Vol. 21 (8) , 2844-2854
Frost heaving and crack initiation characteristics of tunnel rock mass in cold regions under low-temperature degradation
- 20 July 2024
- Published by Springer Nature in Archive of Applied Mechanics
- Vol. 94 (10) , 2921-2940
Freeze-thaw effect-induced unidirectional extension of crack and rock fracture analysis
- 20 July 2024
- Published by Springer Nature in Archive of Applied Mechanics
- Vol. 94 (10) , 2921-2940
Freeze-thaw effect-induced unidirectional extension of crack and rock fracture analysis
- Open Access
- 1 February 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-18
The shape function method of nonlinear thermal stress of granite fracture tips in a high-temperature environment
Exposed rock masses in tunnel portals are susceptible to thermal deterioration in southern China, where temperatures are relatively high. The thermal stress field of rock masses is affected by fracture shape and distribution as fractures near the surface are channels for solar radiation energy to be converted into rock thermal energy. In this study, a function expression is developed for triangular heat sources of fractured rock masses in a tunnel portal in a high-temperature environment. By the function expression, the temperature field and thermal stress field are calculated, and the influence of fracture shape parameters and multi-fracture interaction is analyzed. The results are as follows: (1) the temperature field and thermal stress field of exposed rocks are redistributed by fractures. The internal temperature of the fractured rocks is higher than that of non-fractured rocks, and thermal stress near the fracture tip increases. (2) For triangular fractures of the same length, thermal stress increases as the apex angle increases. (3) When the spacing between parallel fractures or coplanar fractures is close, the superposition effect of thermal stress becomes significant. (4) In a high-temperature environment, temperature field and thermal stress field of a fractured rock are both nonlinear as temperature and thermal stress around fractures increase significantly. The results provide effective reference for stability evaluation of fractured rock masses in tunnel portals and offer theoretical foundation for thermal diseases analysis and protection measures of tunnel engineering in high-temperature environments of southern China.
- 1 February 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-18
Open AccessThe shape function method of nonlinear thermal stress of granite fracture tips in a high-temperature environment
Exposed rock masses in tunnel portals are susceptible to thermal deterioration in southern China, where temperatures are relatively high. The thermal stress field of rock masses is affected by fracture shape and distribution as fractures near the surface are channels for solar radiation energy to be converted into rock thermal energy. In this study, a function expression is developed for triangular heat sources of fractured rock masses in a tunnel portal in a high-temperature environment. By the function expression, the temperature field and thermal stress field are calculated, and the influence of fracture shape parameters and multi-fracture interaction is analyzed. The results are as follows: (1) the temperature field and thermal stress field of exposed rocks are redistributed by fractures. The internal temperature of the fractured rocks is higher than that of non-fractured rocks, and thermal stress near the fracture tip increases. (2) For triangular fractures of the same length, thermal stress increases as the apex angle increases. (3) When the spacing between parallel fractures or coplanar fractures is close, the superposition effect of thermal stress becomes significant. (4) In a high-temperature environment, temperature field and thermal stress field of a fractured rock are both nonlinear as temperature and thermal stress around fractures increase significantly. The results provide effective reference for stability evaluation of fractured rock masses in tunnel portals and offer theoretical foundation for thermal diseases analysis and protection measures of tunnel engineering in high-temperature environments of southern China.
- Open Access
- 27 June 2023
- Published by Springer Nature in Journal of Mountain Science
- Vol. 20 (6) , 1805
Erratum to: Dynamic response characteristics of a circular lined tunnel under anisotropy frost heave of overlying soil at the tunnel portal section in cold regions
- 27 June 2023
- Published by Springer Nature in Journal of Mountain Science
- Vol. 20 (6) , 1805
Open AccessErratum to: Dynamic response characteristics of a circular lined tunnel under anisotropy frost heave of overlying soil at the tunnel portal section in cold regions
- 20 May 2023
- Published by Springer Nature in Journal of Mountain Science
- Vol. 20 (5) , 1424-1440
Dynamic response characteristics of a circular lined tunnel under anisotropy frost heave of overlying soil at the tunnel portal section in cold regions
- 20 May 2023
- Published by Springer Nature in Journal of Mountain Science
- Vol. 20 (5) , 1424-1440
Dynamic response characteristics of a circular lined tunnel under anisotropy frost heave of overlying soil at the tunnel portal section in cold regions
- 15 March 2023
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 41 (4) , 2359-2375
High Temperature Cracking Mechanism of Surrounding Rock Due to TC and CTE Heterogeneity
- 15 March 2023
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 41 (4) , 2359-2375
High Temperature Cracking Mechanism of Surrounding Rock Due to TC and CTE Heterogeneity
- 1 December 2019
- Published by American Society of Civil Engineers (ASCE) in Journal of Transportation Engineering, Part B: Pavements
- Vol. 145 (4) , 04019032
Behavior of Composite Foundations Reinforced with Rigid Columns
Composite foundations reinforced with rigid columns have been widely used as a ground-improvement technique in highway and railway embankments in China. In this study, plate load tests were performed on rigid column–reinforced composite foundations to investigate its load-bearing behavior and the mechanism of load transfer. Two design factors were considered in the study: column length and column spacing. Axial forces of columns as well as vertical stresses and settlement of soils were measured during the loading process. Results show that the upper section of columns together with surrounding soils played a dominant role in the load-bearing capacity of the composite foundation. A significant portion of settlement occurred in the soils within the depth of 0–2 m. With the increase in column spacing or column length, the share of load carried by column increased, but the overall load-bearing capacity of the composite foundation decreased. Negative friction may be generated when a large column spacing was used. Based on the results, proper column length and column spacing should be carefully selected to achieve an optimal overall bearing capacity of the composite foundation.
- 1 December 2019
- Published by American Society of Civil Engineers (ASCE) in Journal of Transportation Engineering, Part B: Pavements
- Vol. 145 (4) , 04019032
Behavior of Composite Foundations Reinforced with Rigid Columns
Composite foundations reinforced with rigid columns have been widely used as a ground-improvement technique in highway and railway embankments in China. In this study, plate load tests were performed on rigid column–reinforced composite foundations to investigate its load-bearing behavior and the mechanism of load transfer. Two design factors were considered in the study: column length and column spacing. Axial forces of columns as well as vertical stresses and settlement of soils were measured during the loading process. Results show that the upper section of columns together with surrounding soils played a dominant role in the load-bearing capacity of the composite foundation. A significant portion of settlement occurred in the soils within the depth of 0–2 m. With the increase in column spacing or column length, the share of load carried by column increased, but the overall load-bearing capacity of the composite foundation decreased. Negative friction may be generated when a large column spacing was used. Based on the results, proper column length and column spacing should be carefully selected to achieve an optimal overall bearing capacity of the composite foundation.