Haoyuan Shao

Catapult-assisted takeoff is the initiation of flight missions for carrier-based aircrafts. Ensuring the safety of aircrafts during catapult-assisted takeoff requires a thorough analysis of their motion characteristics. In this paper, a rigid–flexible coupling model using the Finite Element Method and Multibody Dynamics (FEM-MBD) approach is developed to simulate the aircraft catapult process. This model encompasses the aircraft frame, landing gear, carrier deck, and catapult launch system. Firstly, reasonable assumptions were made for the dynamic modeling of catapult-assisted takeoff. An enhanced plasticity algorithm that includes transverse shear effects was employed to simulate the tensioning and release processes of the holdback system. Additionally, the forces applied by the launch bar and holdback bar, nonlinear aerodynamics loads, shock absorbers, and tires were introduced. Finally, a comparative analysis was conducted to assess the influence of different launch bar angles and holdback bar fracture stain on the aircraft’s attitude and landing gear dynamics during the catapult process. The proposed rigid–flexible coupling dynamics model enables an effective analysis of the dynamic behavior throughout the entire catapult process, including both the holdback bar tensioning and release, takeoff taxing, and extension of the nose landing gear phases. The results show that higher launch bar angle increase the load and extension of the nose landing gear and cause pronounced fluctuations in the aircraft’s pitch attitude. Additionally, the holdback bar fracture strain has a significant impact on the pitch angle during the first second of the aircraft catapult process, with greater holdback bar fracture strain resulting in larger pitch angle variations.

Carrier-based unmanned aerial vehicles (UAVs) require precise evaluation methods for their landing and arresting safety due to their high autonomy and demanding reliability requirements. In this paper, an efficient and accurate simulation method is presented for studying the arresting hook engaging arresting cable process. The finite element method and multibody dynamics (FEM-MBD) approach is employed. By establishing a rigid–flexible coupling model encompassing the UAV and arresting gear system, the simulation model for the engagement process is obtained. The model incorporates multiple coordinate systems to effectively capture the relative motion between the rigid and flexible components. The model considers the material properties, arresting gear system characteristics, and UAV state during engagement. Verification is conducted by comparing simulation results with experimental data from a referenced arresting hook rebound. Finally, simulations are performed under different touchdown points and roll angles of the UAV to analyze the stress distribution of the hook, center of gravity variations, and the tire touch and rollover cable response. The proposed rigid–flexible coupling arresting dynamics model in this paper enables the effective analysis of the dynamic behavior during the arresting hook engaging arresting cable process.

The engagement of the arresting hook with the arresting cable is a critical maneuver that is essential to the safe operation of aircraft landing on aircraft carrier. A comprehensive understanding of the engagement process dynamics is necessary to optimize landing performance and ensure the safety and efficiency of carrier operations. In this paper, an efficient and accurate simulation and analysis method is presented for studying the arresting hook engaging arresting cable process. The Finite Element Method and Multibody Dynamics (FEM-MBD) approach is employed. By establishing a rigid-flexible coupling model encompassing the aircraft frame, arresting hook, carrier deck and arresting gear system, the dynamic model for the engagement process is obtained. The model incorporates multiple coordinate systems to effectively capture the relative motion between the rigid and flexible components, enabling a thorough understanding of the dynamics characteristics. The analysis conducted in this paper takes into account various factors, including the material properties of the components, the characteristics of the arresting gear system, and the state of the aircraft during the engagement process. The analysis method is verified by comparing the simulation results with experiments of arresting hook rebound obtained from reference. Finally, simulations are performed to analyze the engagement process under different touchdown points and rolling angle of aircraft. The simulation results provide valuable insights into the distribution of stresses during the arresting hook and cable engagement, the center of gravity variations, as well as the response of the tire touch and rollover cable under specific scenarios. The proposed rigid-flexible coupling arresting dynamics model in this paper enables effective analysis of the dynamic behavior during arresting hook engaging arresting cable. The results obtained from this analysis offer valuable insights into the performance of the engagement process, which can be used to improve the design of carrier-based aircraft and techniques for carrier landing.

To enable a carrier-based unmanned aerial vehicle (UAV) to track the desired glide trajectory and safely land on the deck with the presence of system faults, this paper proposes a neural network-based adaptive sliding mode fault-tolerant control (NASFTC) method. Firstly, the dynamic model of the carrier -based UAV, the actuator fault model, the additional unknown fault model, and the control framework of the automatic carrier landing system (ACLS) were developed. Subsequently, controllers for both longitudinal and lateral channels were designed by using the NASFTC method. The controller consists of three parts: the adaptive laws for compensating the actuator faults, the RBF neural network for compensating the additional unknown faults, and the sliding mode method for ensuring overall trajectory tracking. Then, the Lyapunov function theorem was applied to carry out the stability analysis. Finally, comparative simulations under three different scenarios were conducted. The comparative results show the effectiveness of the proposed NASFTC method, which has fault-tolerant ability and can successfully control the aircraft to execute carrier landing task regardless of the actuator partial loss fault and the additional unknown fault.