YAYuki Akura

Yuki Akura

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yuki Akura has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Thermophysical characterization of amorphous NiTa thin films for heat-assisted magnetic recording using frequency-domain thermoreflectance

    by Yasuaki Ikeda, Yuki Akura, Ryota Takechi, Yukiko K. Takahashi, Jun Hirotani

    The rapid global growth in data volume has intensified the need to increase the recording density of hard disk drives (HDDs) while reducing storage costs. Heat-assisted magnetic recording (HAMR), a next-generation HDD technology based on laser-induced heating, requires accurate thermal design of the recording medium for high performance. This study examines the thermophysical properties of amorphous NiTa, a candidate material for heat sinks and adhesion layers in HAMR devices. Frequency-domain thermoreflectance measurements were performed on NiTa films with thicknesses ranging from 5 to 500 nm. The volumetric heat capacity was first determined using sufficiently thick samples, after which the effective thermal conductivity was measured across the full thickness range. The measured values, which include interfacial contributions from the glass substrate and aluminum transducer, were analyzed using a series resistor model. Fitting across all thicknesses yields a thermal conductivity of 6.8±0.3 (W m−1 K−1) for NiTa. The results indicate that the thermal conductivity remains practically independent of film thickness, consistent with typical transport characteristics of amorphous materials. Furthermore, the thermal conductivity of NiTa thin films is one to two orders of magnitude lower than that of representative crystalline metallic materials.

  • Physical reservoir computing using nonlinear heat conduction phenomena in alumina ceramic plates

    by Seita Umemoto, Yuki Matsunaga, Yasuaki Ikeda, Yuki Akura, Lijun Liu, Jun Hirotani

    Physical reservoir computing (PRC) has attracted considerable attention as a low-training-cost framework for edge computing. In this study, we propose a PRC system that uses nonlinear heat conduction in an alumina ceramic plate. In the proposed system, the input information is applied as heat, and the transient temperature responses generated by heat conduction are used as reservoir states. The temperature dependences of the thermal conductivity and specific heat of alumina provide nonlinearity without relying on nonlinear sensor elements. The PRC performance was evaluated using temperature data obtained by finite-element analysis of an alumina disk. The results showed that the short-term memory task was improved by shortening the input step duration and increasing the input heat flux, whereas the parity-check task was enhanced by increasing the input heat flux. These results indicate that the input step duration primarily controls the memory, whereas the input heat flux controls the nonlinear transformation through temperature-dependent thermal diffusion. A demonstration experiment was performed using a fabricated alumina ceramic device with embedded resistors for heating and temperature sensing. The experimental results showed trends that were qualitatively consistent with the numerical simulations, demonstrating the feasibility of PRC using heat conduction in an actual solid-state thermal system. This study suggests that heat, which is generally treated as an unavoidable by-product of electronic devices, can be used as a computational resource for edge-computing applications.

  • Physical reservoir computing with nonlinear temperature characteristics of thermal conductivity

    by Seita Umemoto, Yudai Takeda, Yuki Matsunaga, Yasuaki Ikeda, Yuki Akura, Lijun Liu, Masaki Shimofuri, Toshiyuki Tsuchiya, Jun Hirotani

    Physical reservoir computing (PRC) has emerged as a low-cost machine-learning framework for edge computing applications, where real-time processing and energy efficiency are critical due to the rapid growth of data generated by Internet-of-Things devices. This study proposes a PRC scheme based on nonlinear heat-conduction phenomena arising from the nonlinear temperature-dependent thermal conductivity of materials and examines its computational properties using a one-dimensional model. Information is encoded as transient thermal inputs applied at one boundary, while the resulting temporal temperature responses at multiple spatial positions constitute the reservoir states. Nondimensionalization of the governing heat equation reveals key dimensionless parameters that govern dynamical memory and nonlinearity, enabling systematic exploration of the design space independent of specific physical units. Performance is evaluated using benchmark tasks, including the short-term memory task and the parity check task. The results demonstrate that memory capacity and nonlinear transformation capability can be tuned by adjusting the heat-input magnitude and the thermal diffusion time scale. The proposed heat-conduction-based PRC successfully performs both benchmark tasks, demonstrating the feasibility of implementing PRC through nonlinear thermal transport in materials with temperature-dependent thermal conductivity. These findings indicate that engineered thermal media can serve as effective physical reservoirs with material-level tunability for energy-efficient computing systems.

  • Open Access

    Design of topological thermal diffusion in the quasi ballistic phonon regime

    by Keita Funayama, Yuki Akura, Hiroya Tanaka, Jun Hirotani

  • In-plane thermal conductivity measurement of nanoscale thin films via frequency-domain thermoreflectance with multilayer stacking

    by Yuki Akura, Yasuaki Ikeda, Lijun Liu, Jun Hirotani

    Nanoscale thin films are a fundamental building block of modern electronic and spintronic devices, and accurate characterization of their heat transport properties is essential for reliable design. However, measuring the in-plane thermal conductivity of substrate-supported nanoscale films remains difficult due to limited measurement sensitivity. This study introduces an approach that enables such measurements by integrating frequency-domain thermoreflectance (FDTR) with a multilayer stacked structure in which the target film and an interlayer are alternately deposited. This configuration increases the cumulative in-plane heat flow through the target layers while preserving the nanoscale thickness of each individual film. Using a fitting procedure that constrains identical parameters within the stack to shared values, the FDTR response becomes strongly sensitive to the in-plane thermal conductivity of the target film. The method is validated using a theoretical FDTR model. For instance, a 10 nm titanium film with a thermal conductivity of 16.8 W/(m K)—a case in which conventional FDTR yields insufficient sensitivity—exhibits an 11.5-fold enhancement in maximum sensitivity and a reduction in uncertainty to 13.6% when 30 stacked repetitions are used. Additional calculations for films with varying thicknesses and materials demonstrate that the method is suitable for nanoscale films commonly employed in devices, with thermal conductivities from 1 to 100 W/(m K) and thicknesses from 1 to 100 nm. This approach provides a practical and scalable means to experimentally evaluate in-plane thermal transport in nanoscale thin films and supports improved understanding of their thermal behavior in device applications.

  • Utilizing machine learning in the three-omega method to predict thermophysical properties with low variation

    by Yasuaki Ikeda, Yuki Akura, Ryuto Yamasaki, Yuki Matsunaga, Lijun Liu, Masaki Shimofuri, Amit Banerjee, Toshiyuki Tsuchiya, Jun Hirotani

    The three-omega method offers a precise and simple technique for measuring the thermal conductivities of a wide range of materials. Utilizing nonlinear data enhances the determination of multiple thermophysical properties at the micro- and nanoscales. However, challenges such as dependence on initial guesses and convergence to local minima render nonlinear fitting processes unstable. This study introduces a machine learning-based approach that addresses these limitations by pre-learning a globally optimal solution. We developed a methodology that processes three-omega signals using machine learning to determine various thermophysical properties. The approach involved compiling results from the analytical three-omega model and augmenting them with Gaussian noise to create a robust machine learning model. Subsequently, a neural network was trained on this dataset. Testing confirmed the model's accurate predictions of volumetric heat capacity and thermal conductivity. Comparative analyses between machine learning-based and conventional fitting methods on the sample data extracted from the test set demonstrated the superior stability of the machine learning model in predicting thermophysical properties. Furthermore, experimental validation was carried out by applying our machine learning model to real-world data from glass and liquid samples. The correspondence between the predicted values and the theoretical curve of the third harmonic voltage affirmed the model's applicability and accuracy in practical scenarios. These findings validate the potential of our machine learning model for robustly predicting thermophysical properties based on actual measured data.

  • Enhancing the precision of thermal conductivity measurement via transducer patterning in frequency-domain thermoreflectance

    by Yuki Akura, Yuki Matsunaga, Lijun Liu, Yasuaki Ikeda, Masaki Shimofuri, Amit Banerjee, Toshiyuki Tsuchiya, Jun Hirotani

    The thermal transport properties of materials are critical in the thermal design of electronic devices, particularly as these designs increase in complexity. Modern devices frequently incorporate materials with low thermal conductivity, such as insulators and flexible substances used in wearable technology. Frequency-domain thermoreflectance (FDTR) is a common method for measuring thermal conductivity due to its simplicity and accuracy. However, challenges arise when measuring materials with low thermal conductivity, as the sensitivity of the measurement diminishes. This reduction in sensitivity is primarily due to significant lateral heat transfer within the metal transducer on the sample’s surface, complicating the precise determination of thermal conductivity. This study introduces a method to enhance measurement precision by minimizing heat transfer within the transducer. This approach involves selectively patterning the transducer and positioning it near the laser irradiation point to curtail internal heat transfer. This strategy ensures that heat transfer within the sample predominates, thereby augmenting the sensitivity of thermal conductivity measurements. We employed a finite element model to evaluate the effectiveness of this technique and established that transducer patterning notably diminishes the uncertainty in measured thermal conductivities. Validation was achieved by measuring the thermal conductivity of glass [1.216 ± 0.056 W/(m K)]. This measurement is consistent with anticipated values for glass conductivity and demonstrates a reduction in uncertainty to less than one-fourth of that observed in conventional FDTR measurements. Such improvements highlight the method’s capability to yield precise thermal conductivity measurements for low-conductivity materials. This advancement addresses the growing imperative for advanced thermal design in modern electronic devices.


  • Open Access

    Estimating depth-directional thermal conductivity profiles using neural network with dropout in frequency-domain thermoreflectance

    by Yasuaki Ikeda, Yuki Akura, Masaki Shimofuri, Amit Banerjee, Toshiyuki Tsuchiya, Jun Hirotani

    Non-contact and non-destructive methods are essential for accurately determining the thermophysical properties necessary for the optimal thermal design of semiconductor devices and for assessing the properties of materials with varying crystallinity across their thickness. Among these methods, frequency-domain thermoreflectance (FDTR) stands out as an effective technique for evaluating the thermal characteristics of nano/microscale specimens. FDTR varies the thermal penetration depth by modifying the heating frequency, enabling a detailed analysis of the thermophysical properties at different depths. This study introduces a machine learning approach that employs FDTR to examine the thermal conductivity profile along the depth of a specimen. A neural network model incorporating dropout techniques was adapted to estimate the posterior probability distribution of depth-wise thermal conductivity. Analytical databases for both uniform and non-uniform thermal conductivity profiles were generated, and the machine learning model was trained using these databases. The effectiveness of the predictive model was confirmed through assessments of both uniform and non-uniform thermal conductivity profiles, achieving a coefficient of determination between 0.96 and 0.99. For uniform thermal conductivity, the method attained mean absolute percentage errors of 1.362% for thermal conductivity and 3.466% for thermal boundary conductance (compared to actual values in the analytically calculated database). In cases of non-uniform thermal conductivity, the prediction accuracy decreased, particularly near the sample's surface, primarily due to the limited availability of machine learning data at higher heating frequencies.


  • Flexible 3ω sensors on submicron-thick parylene substrates for thermal conductivity measurements of liquids and soft materials

    by Ryuto Yamasaki, Yuki Matsunaga, Yuki Akura, Masaki Shimofuri, Amit Banerjee, Toshiyuki Tsuchiya, Jun Hirotani

    Measurement of thermal conductivity in liquids and soft materials is pivotal across various sectors, from designing cooling systems for electronic devices to monitoring biological parameters via medical devices and studying the thermal properties of tissues. Accurate thermal conductivity measurements require high sensitivity, and a flexible measurement device is advantageous to adapt to the shape of the sample. The 3ω method stands out as an ideal technique that meets these criteria, offering a simple and sensitive approach to assess the thermal properties of materials. In this study, we introduce a 3ω sensor fabricated on submicron-thick parylene substrates. The parylene substrate not only provides the necessary flexibility but also acts as an insulating layer, essential for the measurement of conductive materials. The sensor's sensitivity was enhanced by reducing the thickness of the parylene substrate. A thermal peeling film was utilized as a supporting substrate during the fabrication of the 3ω sensor with a thin parylene substrate, which has a thickness of 0.77 μm. The performance of the sensor was evaluated by measuring the thermal conductivities of water, isopropyl alcohol, and their mixtures, achieving results within 15% of previously reported values.


  • Frequency-domain thermoreflectance with beam offset without the spot distortion for accurate thermal conductivity measurement of anisotropic materials

    by Yuki Akura, Yasuaki Ikeda, Yuki Matsunaga, Masaki Shimofuri, Amit Banerjee, Toshiyuki Tsuchiya, Jun Hirotani

    The measurement of thermal conductivities of anisotropic materials and atomically thin films is pivotal for the thermal design of next-generation electronic devices. Frequency-domain thermoreflectance (FDTR) is a pump–probe technique that is known for its accurate and straightforward approach to determining thermal conductivity and stands out as one of the most effective methodologies. Existing research has focused on advancing a measurement system that incorporates beam-offset FDTR. In this approach, the irradiation positions of the pump and probe lasers are spatially offset to enhance sensitivity to in-plane thermal conductivity. Previous implementations primarily adjusted the laser positions by modifying the mirror angle, which inadvertently distorted the laser spot. Such distortion significantly compromises measurement accuracy, which is especially critical in beam-offset FDTR, where the spot radius has a crucial impact on measured values. This study introduces an advanced FDTR measurement system that realizes probe laser offset without inducing spot distortion, utilizing a relay optical system. The system was applied to measure the thermal conductivities of both isotropic standard materials and anisotropic samples, including highly oriented pyrolytic graphite and graphene. The findings corroborate those of prior studies, validating the measurement’s reliability in terms of sensitivity. This development of a beam-offset FDTR system without laser spot distortion establishes a robust basis for accurate thermal conductivity values of anisotropic materials via thermoreflectance methods.