ABAlexandr Alexandrovich Bryantsev

Alexandr Alexandrovich Bryantsev

*This is an algorithmically generated author record based on publicly available information.

Alexandr Alexandrovich Bryantsev has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • ASSESSMENT OF THE TECHNICAL CONDITION OF A DAM LOCATED IN A SEISMICALLY ACTIVE ZONE

    by G.T. Kareken, N.I. Vatin, N.A. Shanshabayev, A.A. Bryantsev, S.YE. Orazov

    The aim of this study is to assess the technical condition of a dam in a seismically active zone of Kazakhstan. The object is the pressure front of the Sh. Chokin Kapchagay hydropower plant. It consists of a 52 m hydraulic-fill river-bed dam, a 56 m gravel-rubble ravine dam with a sandy-loam screen, and a quartz-porphyry rock abutment. The dams were designed for intensity 7 (MSK-64), but the site intensity was raised to 8 after the 1988 Spitak earthquake. The materials comprised the dynamic passports of the 2025 survey, settlement records and phreatic curves. The methods included in-situ P and S wave velocity profiling and pseudo-static slope-stability analysis. The seepage regime of both dams is stable. Mean settlement rates are 1.6-2.3 mm/yr for the river-bed dam and 2.06-3.8 mm/yr for the ravine dam, and relative compression does not exceed 0.010 %/yr. Wave velocities and dynamic modulus increase with depth without low-velocity zones. The intensely fractured upper 2 m of the abutment has half the compressive strength of deeper rock. All slopes meet the Class I stability requirements at intensities 7 and 8. At the check intensity of 9, the upstream slope of the ravine dam has Ks = 1.14, 3.4 % below the normative 1.18. It is concluded that settlement is decaying, although the ravine dam has not yet stabilised. The pressure front is stable at the current site intensity of 8, and the upstream slope of the ravine dam is its critical element. Dynamic-property profiles of these dams are published for the first time.

  • GROUND-PENETRATING RADAR DIAGNOSTICS OF THE TECHNICAL CONDITION OF LOAD-BEARING STRUCTURES OF THE KAPCHAGAY HYDROPOWER PLANT UNDER LONG-TERM OPERATION

    by G.T. Kareken, Zh.N. Moldamuratov, N.I. Vatin, N.A. Shanshabayev, A.A. Bryantsev, S.YE. Orazov

    Hydraulic structures and their soil foundations degrade during long-term operation, often through hidden subsurface defects. This study used ground-penetrating radar (GPR) to assess the subsurface condition of the Sh. Chokin Kapchagay hydropower plant (Kazakhstan), in service for over 50 years in a zone of seismic intensity 8. Sixty-two records were acquired with an OKO-3 system (150 and 400 MHz antennas) on six elements: the powerhouse platform, the tailrace channel lining, the upstream slope protection of the river-bed and ravine dams, the 220 kV switchyard platform and the stop-log storage area. Wave velocities were derived from diffraction hyperbolas and calibrated against boreholes where available; radargrams were interpreted using radar-facies criteria. Comparing the apparent velocity of each hyperbola with the ground velocity separated buried objects from reflections off above-ground structures. The reinforced-concrete slope protection and tailrace lining produced continuous slab reflections, with no major defects or large voids; however, a 35 m section of the tailrace lining exhibited differential slab settlement. Loosened soil was identified at 0.8-2.0 m beneath the tailrace lining and at 0.9-1.5 m beneath the ravine dam slope protection. Beneath the powerhouse platform, intermittent loosened zones extended to 1.1-1.9 m over about a third of the profiles. The most severe anomalies occurred in the stop-log storage area, where chaotic scattering zones 15-16 m wide below 3.5 m indicate intense loosening and possible voids. No widespread subsurface deterioration was found, but the stop-log storage area requires priority investigation. These results provide a baseline for repeat GPR monitoring.

  • Open Access

    THEORETICAL FRAMEWORK FOR MODELS OF THE TERRITORIAL AND FUNCTIONAL ORGANIZATION OF AGROECOTOURISM COMPLEXES

    by Inna Ostapenko, Alexandr Bryantsev, Tatyana Gvizdikova, Anna Bukhantseva

    The relevance of this study is determined by the need to develop agroecotourism as an interdisciplinary field that integrates agricultural production, recreation, environmental education, and the architectural and planning organization of rural territories. Existing studies usually consider agritourism through the range of services provided, forms of visitor participation, or economic development mechanisms, while the territorial and functional structure of agroecotourism complexes remains insufficiently systematized. The purpose of this article is to develop and theoretically substantiate a typological model for the territorial and functional organization of agroecotourism complexes suitable for scientific analysis and pre-design application. The study is based on literature analysis, structural and functional analysis, typological modelling, and matrix comparison of classification criteria. As a result, three groups of territorial-functional models according to the degree of connection with a basic agricultural enterprise, three types of production orientation, five models of spatial arrangement of functional complexes, and three variants of internal spatial structure were identified. Their combination forms 135 possible organizational variants. The practical significance of the results lies in the possibility of using the proposed typology for pre-design analysis, functional zoning, preparation of design briefs, and selection of phased development scenarios for agroecotourism complexes.

  • ASSESSMENT OF THE TECHNICAL CONDITION OF CONCRETE AND REINFORCED CONCRETE HYDRAULIC STRUCTURES USING 3D ULTRASONIC TOMOGRAPHY

    by Zh.N. Moldamuratov, K.I. Ilyassova, N.I. Vatin, G.T. Kareken, N.A. Shanshabayev, R.K. Sadyrov, А.а. Bryantsev, I.B. Tashmukhanbetova, A.M. Yessenkeldin

    The article presents the results of assessing the technical condition of the concrete and reinforced concrete structures of the emergency spillway of the Tasotkel Reservoir using the 3D ultrasonic tomography method based on the Betonoskop SK-1700 3D system. The study is aimed at detecting hidden defects, evaluating the internal structure of concrete, and analyzing deterioration processes under long-term seepage, hydrodynamic, and seismic impacts. During the investigation, spatial ultrasonic scanning of a 10×10 m section was performed with a diagnostic depth of up to 0.60 m. Three-dimensional tomographic models, ultrasonic wave velocity distribution maps, vertical and transverse sections, and engineering interpretations of defect zones were developed. It was established that the average ultrasonic wave velocity was approximately 3280 m/s, while minimum values in critically deteriorated areas decreased to 1680-1850 m/s. More than 35% of the investigated structural volume was found to be in a state of severe and critical deterioration, while the proportion of potentially hazardous zones associated with internal voids and loss of bonding accounted for approximately 6-8%. The most critical defects were localized in the lower part of the concrete lining and within the concrete-foundation interface zone, where seepage-induced moisture accumulation, structural loosening, delamination, and local void formation were identified. Correlation analysis confirmed a stable relationship between defect depth and the reduction in ultrasonic wave velocity. The agreement coefficient between the 3D ultrasonic tomography results and visual inspection/local opening investigations ranged from 0.79 to 0.88, while the overall diagnostic reliability reached 91-95%. The obtained results confirm the high efficiency of the Betonoskop SK-1700 3D system for diagnosing hidden defects in concrete and reinforced concrete hydraulic structures and can be applied for inspection, monitoring, and assessment of the operational reliability of hydraulic infrastructure facilities.

  • Experimental and numerical investigation of the structural behavior of perforated corrugated-web I-beams with various reinforcement schemes

    by Alexandr Alexandrovich Bryantsev, Inna Ivanovna Ostapenko, Fatimah De’NAn

    1. Developing new and improving existing welded I-beams with thin corrugated webs, including cantilever members weakened by perforations, is important for the development of efficient structural so...

  • MODERNIZATION OF RESIDENTIAL MICRODISTRICTS THROUGH THE INTEGRATION OF ECO-AGRO-ARCHITECTURAL ELEMENTS

    by I.I. Ostapenko, A.A. Bryantsev, T.A. Gvozdikova, N.SH. Seitova, K.B. Bekturganova, O.L. Bantserova

    Modern residential microdistricts in post-Soviet cities are characterized by building wear, a shortage of public spaces, high thermal loads, and an unstable water regime. The integration of eco-agro-architecture elements-courtyard vegetable gardens and orchards, green roofs, rooftop greenhouses, vertical farms, and nature-based stormwater infrastructure-is considered an engineering-architectural solution that combines climate adaptation, increased energy efficiency, and improvement of urban environmental quality. The aim of this study is to substantiate engineering-architectural approaches to the modernization of post-Soviet residential microdistricts through the integration of eco-agro-architecture elements and to determine the conditions for their effective and safe implementation in Kazakhstan. The research methodology includes a qualitative comparative analysis of “green” infrastructure solutions as well as a synthesis of design principles and a phased implementation model. The study results are presented as a three-step model-quick measures on existing roofs and courtyards; pilots on public buildings with monitoring of energy use and water drainage; scaling through municipal programs and standards. The practical significance lies in reducing peak stormwater runoff, mitigating thermal loads, and increasing the resource efficiency of buildings, as well as in forming social practices for the shared use of courtyard and rooftop spaces. The results are intended for akimats, designers, and management organizations and can be applied when preparing modernization passports and developing pilot projects.

  • A TECHNOLOGICAL APPROACH TO REDUCING LABOR AND MATERIAL CONSUMPTION OF CRANE RUNWAY I-BEAMS WITH CORRUGATED WEB

    by International Educational Corporation, D.A. Okanov, A.A. Bryantsev, S.е. Niyetbay, International Educational Corporation; Satbayev University, M.B. Bozkurt, Manisa Celal Bayar University

    The growing demand for industrial and logistics infrastructure has intensified the need for efficient and economically viable structural systems, particularly in crane runway applications. Welded I-beams with corrugated webs have emerged as a promising alternative to conventional flat-web designs, offering notable advantages in terms of production efficiency, weight reduction, and structural performance. This study investigates the technological strategies involved in manufacturing such beams, with a focus on minimizing labor intensity and material usage through process optimization. A comparative analysis is conducted between beams with flat and corrugated webs, drawing upon experimental data and practical observations from automated production lines. The research highlights the implementation of rotary corrugation machines, automated welding stations, and mechanized assembly platforms. A key innovation lies in eliminating transverse stiffeners, made possible by the enhanced out-of-plane stability provided by the corrugated profile. This not only reduces the number of fabrication steps but also contributes to overall simplification of the production workflow. The findings indicate that the use of corrugated webs results in a weight reduction of up to 6.9%, depending on the design load, and a decrease in labor intensity by up to 40% when compared to traditional flat-web I-beams. These improvements are achieved without compromising structural integrity or regulatory compliance. In conclusion, the study demonstrates that corrugated web beam technology is a viable solution for modern steel construction. It enhances productivity, lowers manufacturing costs, and supports broader adoption of efficient beam systems in industrial and civil engineering contexts.

  • MULTIFACTOR ASSESSMENT OF HYDRAULIC STRUCTURES IN SEISMICALLY ACTIVE ZONES: A CASE STUDY OF THE TASOTKEL RESERVOIR, REPUBLIC OF KAZAKHSTAN

    by Zh.N. Moldamuratov, A.A. Bryantsev, G.T. Kareken, International Educational Corporation, N.A. Shanshabayev, LLP StroyTechExpertiza, A.Z. Tukhtamisheva, O.D. Seitkazinov

    This article presents a multifactor assessment of the technical condition of the Tasotkel Dam, located in the seismically active zone of southern Kazakhstan. With the increasing frequency and intensity of earthquakes in the region - including the March 28, 2025, earthquake near the village of Merke in the Zhambyl region - there is a growing need for a systematic approach to evaluating the seismic safety of hydraulic structures. The investigation employed a range of modern techniques, including visual inspection, instrumental monitoring, geodetic surveying, non-destructive testing of concrete structures, as well as laboratory and in-situ analysis of the physical and mechanical properties of the dam body and its foundation soils. The assessment revealed localized defects in the facing, signs of erosion, reduced piezometric levels compared to design values, and high filtration activity of the foundation. Geodetic data confirmed the absence of critical deformations but identified areas of potential instability. Based on the collected engineering data, a numerical model of the dam was developed using the Plaxis 2D software package. Slope stability calculations were performed for two key cross-sections (PK 5+00 and PK 12+00) under seismic loading scenarios corresponding to intensities of 7 and 8 on the MSK-64 scale. As a result, safety factors, potential failure surfaces, filtration flow directions, and pore pressure distributions were identified. The study revealed the necessity for reconstruction and seismic strengthening of certain dam sections. The findings underscore the importance of implementing a multifactor approach as a reliable diagnostic tool in conditions of elevated seismic risk.

  • PROSPECTS FOR THE DEVELOPMENT OF AGRO-TOURISM ON THE TERRITORY OF THE REPUBLIC OF KAZAKHSTAN

    by International Educational Corporation, I.I. Ostapenko, A.A. Bryantsev

    This article discusses the potential for the development of agro-tourism, which is an industry of the national economy that requires significant investment. Agro-ecotourism is one of the most popular forms of modern recreational activity. Depending on their specific characteristics, natural and climatic conditions, and management practices, various countries of the world organize this activity in different ways. It has been determined in this work that recreational activities are based on agro-landscapes and natural recreational resources. A systematic approach was the basic methodological foundation for this research, specifically the method of factor analysis, which enabled the identification of key questions for surveys that form the basis for prospects for agro-ecotourism development. A sociological survey conducted by KAZTOUR based on the author’s questionnaire revealed population preferences in the field of agrotourism. Among the organisers of tourist trips, 30.9% chose hiking, 24.4% chose enjoying nature, 15.5% wished to get acquainted with agriculture and care for animals, and 13.6% expressed a desire to receive diverse impressions from a business trip. The majority of people (70.4%) preferred a foothill landscape, 26.1% preferred a river-steppe landscape, and only 3.4% preferred a desert landscape. Most respondents, 47.6%, preferred two-day trips with overnight stays, another third, 33%, chose one-day trips without overnight stay, and only 7% of respondents chose a week-long vacation. A program has been proposed for the successful development of agritourism in Kazakhstan at the city or even country level, reflecting factors that will lead to a high demand for agritourism among the population. These factors are listed in the results of the article. As part of the development of the tourism cluster in the republic, priority areas for tourism have been identified: business tourism, ecological tourism, cultural and educational tourism, active and adventure tours. The main tasks have been identified and necessary methods have been proposed to address the issues of popularization and development of agritourism on the territory of the Republic of Kazakhstan.