AAAisulu Abduova

Aisulu Abduova

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Aisulu Abduova has a total of 54 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    КОМПЛЕКСНАЯ ЭКОЛОГИЧЕСКАЯ ОЦЕНКА ТЕХНОГЕННЫХ ОТХОДОВ ПРОМЫШЛЕННЫХ ПРЕДПРИЯТИЙ И ИХ ВЛИЯНИЕ НА ОКРУЖАЮЩУЮ СРЕДУ (НА ПРИМЕРЕ Г. ШЫМКЕНТА)

    by Сабыр Балыбек, Гульмира Кенжибаева, Айсулу Абдуова, Жақсылық Пернебаев, Анар Есимова, Есенбек Есимов

    This article presents an environmental assessment of technogenic waste generated by industrial enterprises in the city of Shymkent, considering its classification and environmental impact. The relevance of the study is driven by industrial growth and increasing waste volumes, which intensify pressure on air, soil, and water resources. An analysis of industrial enterprises by environmental hazard categories in accordance with the Environmental Code of the Republic of Kazakhstan was conducted. In addition, the main sources of waste generation, including metallurgical, oil refining, and chemical enterprises, were identified. The characteristics of current and historically accumulated waste were also examined. Based on field and laboratory investigations, exceedances of pollutant concentrations were identified, confirming environmental risks. In addition, remote sensing data were used to detect unauthorized waste disposal sites. The findings highlight the need to improve the waste management system and implement environmental monitoring methods to ensure the sustainable development of the region. Keywords: technogenic waste, environmental assessment, industry, pollution.

  • Open Access

    Eco-Constructive Modules for Urban Environmental Remediation in Arid Conditions: A Systematic Review of Concepts, Classification Approaches, and Qualimetric Evaluation Methods

    by Aisulu Abduova, Nailya Zhorabayeva, Nursulu Sarypbekova, Ayaulym Tileuberdi, Arailym Sabyrkhan, Aqerke Suletbek

    Rapid urbanization in arid climates is accompanied by comprehensive degradation of the urban environment, where traditional approaches to greening demonstrate low sustainability due to water scarcity and extreme temperature conditions. This paper presents a systematic review of contemporary concepts, classification approaches, and methods for the quantitative assessment of eco-constructive modules designed for the local rehabilitation of urban systems. A critical synthesis of the evolution of nature-inspired solutions was conducted, revealing conceptual and terminological fragmentation and the absence of climate-adapted classifications for arid regions. The necessity of transitioning from local analytical monitoring to multi-criteria qualimetric assessment is substantiated. As a result, a conceptual matrix for classifying modules based on parameters of function, scale, technological autonomy, and climate adaptation has been developed, and a methodological framework for calculating an integral index of ecological potential has been proposed. The critical role of parametric design and microclimatic modeling in the pre-project validation of solutions is demonstrated. The proposed scientific and applied framework addresses the identified research gaps, providing a reproducible methodology for the design, quantitative assessment, and regulatory integration of modular systems. The results lay the foundation for transforming passive urban surfaces into an active network of local sanitation.


  • Open Access

    Assessment of Ecological Sensitivity to Climate Change in Southern Kazakhstan: A Composite NDVI–Climate Index Approach (2010–2025)

    by Aisulu Abduova, Erzhan Kaldybek, Gulmira Kenzhaliyeva, Gulzhan Bektureyeva, Nailya Zhorabayeva, Akmaral Yussupova, Aidana Kozhakhmetova, Arailym Askerbekova, Ayaulym Tileuberdi, Arailym Sabyrkhan

    Climate change threatens ecosystem stability in arid Central Asia, yet regional vegetation responses remain poorly resolved at the operational scale of land-use policy. We integrated long-term meteorological records (2000–2024) from Kazhydromet with Landsat surface-reflectance imagery for four epochs (2010, 2015, 2020, 2025) across the five administrative regions of Southern Kazakhstan (≈710,000 km2). After cross-sensor harmonization of Landsat 5 TM and Landsat 8 OLI, dense vegetation cover (NDVI > 0.4) increased modestly across all regions, with the cumulative area growing from 9.09 to 9.60 million hectares (+5.6%) and a transient 2020 minimum linked to the 2018–2020 drought. Per-region OLS trend slopes were not statistically significant at p < 0.05, given the four-epoch sampling (n = 4). A composite Biodiversity–Climate Sensitivity Index (BCSI), constructed from four normalized components (temperature trend, precipitation deficit, NDVI trend, and the coefficient of variation of dense-vegetation cover as a biodiversity–vulnerability proxy), identifies the lower Syr Darya floodplain and former Aral Sea margins as the most sensitive territories and the Northern Tien Shan as the most resilient. The framework provides an operational evidence base for climate-adaptive conservation aligned with SDG 13 and SDG 15.

  • Investigation of the effect of a modified additive on the strength characteristics of foam concrete

    by А.м. Askerbekova, D.S. Dyussembinov, Zh.A. Shashpan, A.A. Abduova, M.A. Kambarov

    The article presents the second stage of the investigate the effect of the modified additive on the strength characteristics of foam concrete. This work describes a method for manufacturing foam concrete samples, selects a modifying additive composition with different percentages of components, and analyzes their strength characteristics. The purpose of introducing plasticizing additives (post-alcohol bard) in foam concrete D600 to reduce water consumption and the expected increase in strength. To evaluate the changes in strength, samples were made and tested in compression at the age of 3, 7, 14, and 28 days of normal moisture curing. According to research results, the use of such additives can significantly reduce formwork removal times, increase the load-bearing capacity of structures, and expand the scope of application of foam concrete—even to structural and thermal insulation products. Additives improve not only strength but also structural uniformity, reducing the number of macropores and increasing the density of the material.

  • Opportunities for environmentally sustainable development of low-carbon technologies in cement production

    by N.B. Sarsenbayev, M.SH. Salamanova, B.K. Sarsenbayev, G.R. Sauganova, R.S. Fediuk, M.M. Begentayev, A.S. Kolesnikov, A.A. Abduova

    In the context of the transition to a low-carbon economy, the development and implementation of environmentally sustainable technologies in cement production is becoming a key priority. Therefore, the development of new binding materials with reduced clinker content or no clinker at all is becoming a key area for reducing the carbon footprint in construction. Use of clinker-free binders, such as geopolymers and various equivalents based on mineral additives, can significantly reduce the carbon footprint of the construction sector in the environment. The most promising and appropriate benchmark is the disposal of industrial waste of aluminosilicate oxide composition with subsequent mechanical and alkaline activation. For the first time, the microstructure of geopolymers based on aspiration cement dust and tuff has been comprehensively studied. The theoretical prerequisite for the creation of a binder system of such a concept is the synthesis of sufficiently strong and resistant to external manifestations of alkali metals, including the structures of frame aluminosilicates with a hidden crystalline structure. The results of a comprehensive study (X-ray phase analysis, scanning electron microscopy, electron dispersion spectrometry, differential thermal analysis and IR spectroscopy) indicate the presence of characteristic hydration reaction products in the geopolymer paste. The following have been identified in the composition of the material: hydrated aluminosilicates; aluminates; silicate groups of sodium and calcium; mineral phases (quartz, calcite); feldspars of the albite-orthoclase series; micaceous components, etc. The data obtained confirm the typical composition characteristic of the processes of structure formation in geopolymer systems. The results obtained on the key results of the conducted studies confirm the high efficiency of the proposed technology and guarantee increased strength and durability of geopolymer concrete.

  • Open Access

    Bulletin WKU

    by Айтуган М.е. Абдуова А.а

    The annotation.This article discusses the use of environmentally friendly structures (phytoconstructions) related to the naturalization of urban development as a way to improve the urban environment. Naturalization of large areas of urban development is becoming a practical large-scale area of urban development. The purpose of this direction is to connect densely built-up central areas of the city with a green zone, a common landscaping system. A method for quantifying the impact of a phytomodule on the environment using the qualimetric method has been developed. An individual "property tree" has been developed for the adjacent territory with a typical set of FMS. The calculation part of the method is based on the use of indicators: weighting coefficient, background value, measurement result, factor indicators. These indicators are determined by measurements and expertise. The improvement of the environment as a result of the impact of the active part of the phytomodule is characterized by the ratio of ecological potential. Keywords: Environment, naturalization of the urban environment, eco-structures, plants, ecological potential,qualimetric method Аннотация.В данной статье рассматриваются вопросы применения экологичных конструкций (фитоконструкций) связаннные с натурализацией городской застройки, как направлением улучшения городской среды. Натурализация больших площадей городской застройки становится практическим крупномасштабным направлением градостроительного развития. Цель этого направления заключается в том, чтобы связать плотно застроенные центральные районы города с зеленой зоной, общей системой озеленения. Разработан метод количественного воздействия фитомодуля на окружающую среду с использованием квалиметрического метода. Для придомовой территории с типовым набором ФКМ разработано индивидуальное «дерево свойств». Расчетная часть метода основывается на использовании показателей: коэффициент весомости, фоновое значение, результат измерения, показатели фактора. Эти показатели определены путем измерений и экспертизы. Улучшение состояния окружающей среды в результате воздействия активной части фитомодуля характеризуется отношением экологического потенциала. Ключевые слова: Окружающая среда, натурализация городской среды, экоконструкции, растения, экологический потенциал,квалиметрический метод Аңдатпа.Бұл мақалада қала ортасын жақсарту бағыты ретіндегі қала құрылысын табиғиландырумен байланысты экологиялық конструкцияларды қолдану мәселелері қарастырылады. Қала құрылысының ауқымды алаңдарын табиғиландыру қала құрылысын дамытудың іс жүзіндегі ірі ауқымды бағытына айналды. Бұл бағыттың мақсаты қаланың тығыз орналасқан орталық аудандарын жасыл аймақпен, көгалдандырудың жалпы жүйесімен байланыстырудан тұрады. Квалиметрикалық әдісті пайдалана отырып, қоршаған ортаға фитомодульдің сандық ықпал ету әдісі қарастырылды. Квалиметрикалық әдіс арқылы фитомодульдің типтік жиынтығына ие үй жанындағы аумақтар үшін жеке «қасиет ағашы» есептеліп жасалынды. Әдістің есептеу бөлімі көрсеткіштерді пайдалануға негізделеді: салмақ коэффициенті, фондық мән, өлшеу нәтижесі, фактор көрсеткіштері. Бұл көрсеткіштер өлшеу және сараптама жолымен анықталған. Фитомодульдің белсенді бөлігінің ықпал етуі нәтижесінде қоршаған орта ахуалын жақсарту, экологиялық әлеуеттің фондық қатынасымен сипатталады. Кілт сөздер: Қоршаған орта,қала ортасын табиғиландыру, экоконструкциялар, өсімдіктер, экологиялық әлеует,квалиметрикалық әдіс.

  • Open Access

    Creating a Green Infrastructure and Optimizing the City’s Territory in Order to Maintain Sustainable Development

    by Aisulu Abduova, Meirbek Aitugan, Ayaulym Tileuberdi, Bekzat Baibatyrova, Farida Yunusova

    The purpose of the research is to identify the features of development of a pattern of green infrastructure of megapolises as a basis of sustainable development. The advancement algorithm of green infrastructure of megapolises is implemented for the first time and it is a scientific novelty. The structural features of green infrastructure, namely the division of surface elements into central and peripheral cores, and the division of linear elements into natural and natural–artificial corridors are highlighted by means of an example of Shymkent city, (Republic of Kazakhstan). Their maps were made taking into account the territorial and industrialized structure. Proposals were made to improve the functioning of the green infrastructure of Shymkent city, promoting sustainable development and creating a population-friendly environment. The analysis of green infrastructure and the impact of socio-economic and demographic infrastructure on the environment was carried out on the advancement of the green infrastructure of megapolises; the main methodological principles were determined. The statistical, cartographic, analytical, comparative and empirical methods were used in this research. The work was carried out using the following software: CorelDraw X4, Microsoft Word, Microsoft Excel, 2Gis 3.16, Adobe Photoshop.


  • Open Access

    Utilization of Anthropogenic and Natural Waste to Produce Construction Raw Materials

    by Bakhytzhan Sarsenbayev, Said-Alvi Murtazaev, Madina Salamanova, Erzhan Kuldeyev, Magomed Saidumov, Nuraly Sarsenbayev, Sultan Auyesbek, Gaukhar Sauganova, Aisulu Abduova

    The concept of the sustainable development of the world economy is currently aimed at achieving carbon neutrality, and this is due to the global warming of the planet. Energy and construction make a significant contribution to the release of carbon emissions into the environment and atmosphere. According to statistics, simply burning one ton of Portland cement clinker provokes the release of at least half a ton of carbon dioxide. In this study, the prepared samples were subjected to electron diffraction studies, as well as the X-ray phase analysis of the zone (XRF) using an ARLX’TRA diffractometer. Studies of macro- and microstructures were carried out using a Quanta 3D 200i scanning microscope. The obtained spectra were processed using EDAX TEAM software. The study of the microstructure of the samples showed that the bulk of the heterogeneous systems consisted of volumetric aggregates and intergrowths, i.e., small accumulations on their surfaces with pronounced cleavage, features of the microstructure indicating mineral formation processes. Therefore, the development of low-carbon construction models will make it possible to make a contribution and open an effective path to the implementation of climate policy through the rational use of natural resources and the involvement of industrial waste and nature-like technologies in the production process. In this regard, one of the options for solving the identified problems is to revise existing technologies and develop low-carbon, low-clinker binders using industrial waste and substandard raw materials.


  • Open Access

    Improving the Methods of Solid Domestic Waste Disposal to Reduce Its Human Impact on the Environment

    by Bekzat Baibatyrova, Ayaulym Tileuberdi, Meiram Begentayev, Erzhan Kuldeyev, Ruslan Nyrlybayev, Zhaksylyk Altybayev, Bakhytzhan Sarsenbayev, Aisulu Abduova, Gaukhar Sauganova

    Kazakhstan is embarking on a fresh approach to managing waste, aiming to recycle and repurpose solid household waste while integrating innovative, eco-friendly technologies for its treatment and disposal. The main goal is to reduce the amount of waste sent to landfills and instead convert it into more stable forms, lessening its harmful impact on the environment. This effort requires a comprehensive strategy, especially as existing landfills still need to be managed and rehabilitated when they reach capacity. It is essential to use municipal solid waste as a resource for producing various goods, which not only helps in landfill management but also aligns with principles of sustainability. This approach aligns with circular economic principles and helps to reduce the technological impact of landfills on the surrounding environment. The main types of waste in the Aktas landfill were identified as a result of this research: it is glass, of which only 3% is recycled. In our results, the setup allowed for the extraction of valuable components from the fine fraction, which can then be recycled. This enriches the organic material ready for composting (organo-mineral raw material mixture) with food waste.


  • Open Access

    ӨНЕРКӘСІПТІҢ ТЕХНОГЕНДІК ҚАЛДЫҚТАРЫ ҚҰРЫЛЫС МАТЕРИАЛДАРЫН ӨНДІРУГЕ -БАҒАЛЫ ШИКІЗАТ

    by AL-FARABI KAZAKH NATIONAL UNIVERSITY, Akmaral Batyrkhanova, Raziya Issayeva, Bakytzhan Sarsenbayev, Gaukhar Sauganova, Aisulu Abduova, Разия Исаева

    The growth of industrial production leads to an increase in the volume of waste generated and the costs of their storage, concentration, burial, disposal, capture or neutralization, especially in the non-ferrous metallurgy of Kazakhstan. The metallurgical production system is based on technological processes that actively interact with the environment. The bulk of existing technological processes are built on the principle of open systems, on the one hand consuming raw materials and energy, and on the other - producing finished products and waste. Taking into account the current level of production, a significant period of time is still required to significantly reduce production waste associated with the improvement of technological processes. During these periods, waste accumulating in industrial and other territories continues to intensively pollute the soil, air and water sources. The purpose of the work: Utilization of man-made industrial waste and development of technological bases for the production of composite cements based on them. The use of waste "carbonate-barium tailings", phosphoric and blast furnace slags in the production of composite cements, on the one hand, improves the ecological situation of the region, and on the other hand, allows us to save reserves of natural resources for future generations, especially non-renewable ones, and prevent the destruction of natural landscapes with natural self-development. In the course of the work, standard and generally accepted research methods were carried out: chemical and mineralogical methods of analysis, scanning electron microscopy, physical and mechanical tests. Key words: utilization of waste carbonate-barium tailings, technogenic waste, resource conservation, energy conservation, phosphoric and blast furnace slag, environmental damage, composite low-clinker finely ground cement.