AKAnirban Kar

Anirban Kar

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Anirban Kar has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Pushing the Limits of Computing: Transistor-to-Processor Benchmarking at 77 K With Self-Heating Effect

    by Shivendra Singh Parihar, Florian Klemme, Anirban Kar, Yogesh Singh Chauhan, Hussam Amrouch

  • Open Access

    Impact of Aging, Self-Heating, and Parasitics Effects on NSFET and CFET

    by Swati Deshwal, Sufia Shahin, Anirban Kar, Yogesh S. Chauhan, Hussam Amrouch

    This work presents a comparative analysis of Complementary Field-Effect Transistor (CFET) and Nanosheet FET (NSFET) architectures, with a focus on self-heating effects (SHE), Negative Bias Temperature Instability (NBTI), Hot Carrier Degradation (HCD), and the impact of Back-End-of-Line (BEOL) parasitics on standard cell performance. NBTI degradation is modeled using a framework combining Reaction-Diffusion (RD) and Reaction-Drift-Diffusion (RDD) mechanisms in TCAD. BEOL parasitics are extracted using TCAD-generated structures. Both the CFET and NSFET exhibit similar degradation behavior under NBTI stress. However, CFETs show more pronounced degradation due to HCD, primarily driven by stronger SHE. Next, we simulate CFET and NSFET-based 3D inverters and SRAM structures in TCAD, with BEOL interconnects up to M3 level, to study the impact of parasitics on the circuit performance. Meanwhile, CFETs offer ~50% area savings at the standard cell level and lower parasitics, leading to a 42% improvement in inverter propagation delay. The SRAM cells based on CFETs are also evaluated and compared against NSFET in terms of area, noise margins, and performance. CFET SRAM cell provides area gain along with faster and more stable write operation, providing a potential advantage in high-performance applications as compared to NSFET.


  • Open Access

    Ferroelectric Digital In-Memory Computing for Scalable, Reliable, and Efficient Similarity Computation

    by Anirban Kar, Albi Mema, Thorgund Nemec, Stefan Dünkel, Halid Mulaosmanovic, Sven Beyer, Yogesh Singh Chauhan, Hussam Amrouch

    Classification-based learning in deep neural networks, particularly few-shot learning, demands efficient similarity metrics such as Hamming distance. Conventional architectures suffer from high energy overheads due to frequent data movement between memory and processing units, hindering scalability. In-memory computing addresses this by integrating computation within memory, yet analog-based systems rely on power-hungry analog-to-digital converters (ADCs) and face scalability challenges due to device variability, especially in emerging memories. This work presents a fully digital Ferroelectric FET (FeFET)-based Logic-in-Memory (LiM) XOR cell, designed using GlobalFoundries’ 28 nm technology, eliminating ADCs and ensuring robust, energy-efficient, and scalable operation. Our 2T FeFET XOR cell, applied to 4096-bit Hamming distance calculations, achieves $23\times $ lower energy, $3\times $ faster latency, and $14\times $ area reduction over state-of-the-art designs. Delivering 2337 Gsamples/(s $\cdot $ W $\cdot $ mm2) — a $300\times $ improvement — this architecture offers a compelling solution for energy-efficient, reliable, and scalable AI hardware, driving sustainable computing.


  • Open Access

    Characterization and Modeling of SH in Multi-Finger RF LDMOS Transistors Using BSIM-BULK Model

    by Ayushi Sharma, Shivendra Singh Parihar, Anirban Kar, Weike Wang, Kimihiko Imura, Yogesh Singh Chauhan

    In this work, we present self-heating (SH) characterization and modeling of 130 nm Bipolar-CMOS-DMOS (BCD) technology node multi-finger Laterally Diffused Metal-Oxide-Semiconductor (LDMOS) transistors using extensive DC and S-parameter measurements. To accurately capture the impact of SH across a wide frequency range, we use a fourth-order thermal network within the industry-standard Berkeley Short-channel IGFET (BSIM)-BULK model framework. Additionally, we analyze the frequency behavior of RF bulk multi-finger LDMOS transistors and capture parasitic effects due to substrate and gate network. Our findings provide significant insights into LDMOS transistors. In particular, increasing the finger count reduces thermal resistance (by 6.6,∘C/Watt). Understanding how thermal resistance varies with finger count allows designers to optimize LDMOS layouts and mitigate SH effects. This leads to improved thermal management and more efficient, reliable RF devices.

  • Open Access

    CFET Beyond 3 nm: SRAM Reliability Under Design-Time and Run-Time Variability

    by Sufia Shahin, Swati Deshwal, Anirban Kar, Mahdi Benkhelifa, Yogesh S. Chauhan, Hussam Amrouch

    This work investigates the reliability of complementary field-effect transistors (CFETs) by addressing both design-time variability arising from process variations and run-time variability due to temperature and aging effects. A rigorously calibrated TCAD model, validated against experimental CFET data, is employed to quantify the impact of metal gate granularity (MGG)-induced work function variation (WFV) and random dopant fluctuation (RDF) on key device parameters, including the threshold voltage (VTH), on-state current (ION), and off-state current (IOFF). Temperature-dependent variability is systematically analyzed to further elucidate the behavior of these advanced devices. To capture the dynamic effects of aging, the reaction-diffusion (RD) framework—which accounts for defect generation due to Negative Bias Temperature Instability (NBTI)—is implemented in TCAD, enabling detailed modeling of trap generation and the corresponding VTH shifts in p-type transistors under varying gate stress biases (VGSTR) and operating temperatures. At the circuit level, a full array of 6T-SRAM cells with the requisite peripheral circuits is simulated using SPICE after careful calibration of the the industry-standard compact model of gate-all-around (BSIM-CMG) against the TCAD data. Variability analysis reveals that the access disturb margin achieves a cell sigma (μ/σ) of 17.4 at nominal supply voltage, significantly exceeding the 6σ robustness criterion for read disturbances. Moreover, as the operating temperature increases from 300K to 398K, the read static noise margin (RSNM) and hold static noise margin (HSNM) degrade by 13.7% and 6.37%, respectively, while the write static noise margin (WSNM) improves by 18.3 %. These findings provide critical insights into the design trade-offs and reliability challenges of CFET-based SRAMs.


  • Open Access

    First Demonstration of Ferroelectric Digital In-Memory Computing for Scalable, Reliable and Ultra-Efficient Similarity Computation

    by Hussam Amrouch, Anirban Kar, Albi Mema, Thorgund Nemec, Stefan Duenkel, Halid Mulaosmanovic, Sven Beyer, Yogesh Singh Chauhan

    Classification-based learning has become a cornerstone of deep neural networks, particularly in few-shot learning, where accurate similarity metrics, such as Hamming distance, are critical. However, conventional architectures require retrieving class vectors from a physically separated memory for Hamming distance calculations, incurring significant energy penalties due to data movement. This inefficiency poses a challenge to scalability and overall system performance. In-memory computing, which eliminates data transfers between processing and memory units, is increasingly recognized as a promising solution to this von Neumann bottleneck. Analog content-addressable memory (CAM)-based systems address this issue by embedding class vectors directly within CAM cells. However, their reliance on sensing circuits, particularly analog-to-digital converters (ADCs), introduces scalability and reliability challenges. The limited sense margin of ADCs, combined with device variability, further constrains array size and performance. These issues are exacerbated with emerging non-volatile memory devices like ferroelectric field-effect transistors (FeFETs). In this work, we present an innovative FeFET-based digital Logic-in-Memory (LiM) XOR cell, fabricated using GlobalFoundries’ 28 nm SLPe technology, eliminating the need for ADCs. Our 2T FeFET-based XOR cell offers a fully digital, compact, and energy-efficient solution that is robust to device variability and scalable for large systems. Applied to Hamming distance calculations for 4096-bit class vectors, our design achieves a 23-fold reduction in energy consumption, a 3-fold decrease in latency, and a 14-fold reduction in silicon footprint compared to state-of-the-art solutions. Crucially, our FeFET-based architecture demonstrates an unprecedented efficiency of 2337 Gsamples/(s·W·mm2 ), a 300-fold improvement over conventional designs, offering a unique competitive advantage where energy efficiency, reliability, and performance trade-offs have long been a concern. Our efficiency gains, while maintaining the maturity of digital computing, align with the industry’s demand for energy-efficient, scalable, and reliable in-memory computing. Furthermore, digital LiM supports the broader goal of energy-efficient AI hardware without sacrificing reliability, making it highly appealing to researchers and industries focused on sustainable computing.

  • Open Access

    Investigating Self-Heating Effects in Ferroelectric FinFETs for Reliable In-Memory Computing

    by Swati Deshwal, Shubham Kumar, Swetaki Chatterjee, Anirban Kar, Shivendra Singh Parihar, Yogesh Singh Chauhan, Hussam Amrouch

    Ferroelectric (Fe) FET has emerged as a promising candidate for efficient in-memory computing due to its properties, such as non-volatility and low power. However, scaled 3D devices such as Fe-FinFET suffer from significant self-heating effects (SHE) and process variations. These issues cause inconsistent performance and reduce reliability, limiting their applicability in high-performance applications like ternary content addressable memory (TCAM) and Hyperdimensional computing (HDC). In this paper, we explore the impact of SHE on 14 nm Fe-FinFETs using a cross-layer framework, analyzing how these effects and associated variations affect both circuit-level (TCAM cells) and system-level (HDC) performance. Our results reveal an increased error probability in Hamming distance (HD) calculations through the TCAM array when SHE and variations are present. Additionally, we demonstrate how SHE and variations influence the inference accuracy of the HDC framework.


  • A Lightweight PUF-Based Weights Obfuscation Technique for Secure In-Memory AI Inference

    by Luca Parrini, Anirban Kar, Benjamin Hettwer, Taha Soliman, Yogesh Singh Chauhan, Hussam Amrouch, Norbert Wehn

    In-Memory Computing (IMC) has introduced a novel computational approach that substantially improves emerging embedded AI accelerators’ latency and power consumption efficiency. Despite the numerous advantages, IMC architectures also introduce new security vulnerabilities that may compromise the confidentiality of the deployed Neural Network (NN) algorithms. In this work, following an analysis of the potential threats, we present a novel lightweight security countermeasure for IMC accelerators. This methodology can be employed to de-obfuscate the pre-trained weights of NN architectures whose bits’ significance has been reordered prior to the deployment phase onto the IMC crossbar. The proposed solution is based on the coordinated action of a Ferroelectric Field-Effect Transistor (FeFET) based Physical Unclonable Function (PUF) design and shifting registers. These components perform custom arithmetic shift operations on the values calculated by the IMC device at runtime to obtain a coherent inference computation. Furthermore, a design-space exploration method is proposed to investigate the trade-off between area overhead and the level of security provided by the implementation. The results show that with less than 3% of area overhead our design is robust against all the tested attack strategies.


  • Open Access

    Small-Signal and Large-Signal RF Characterization and Modeling of Low and High Voltage FinFETs for 14/16 nm Technology Node SoCs

    by Anirban Kar, Shivendra Singh Parihar, Jun Z. Huang, Huilong Zhang, Weike Wang, Kimihiko Imura, Yogesh Singh Chauhan

    Modern System-on-Chip (SoC) architectures necessitate low-voltage (LV) core transistors featuring excellent digital, analog, and radio frequency (RF) properties, as well as thick oxide transistors serving as robust I/O buffers and high-voltage (HV) transistors essential for efficient power management. This study presents a comprehensive DC to RF characterization, a detailed modeling strategy, and subsequent model parameter extraction for commercially produced LV and HV Fin Field Effect Transistors (FinFETs) at 14/16 nm technology. The industry-standard BSIM-CMG compact model is modified to accurately capture the characteristics of the HV FinFET devices integrated with the digital LV FinFETs for SoC applications. A detailed analysis of the DC, analog, and RF performance of LV, I/O, and HV FinFETs compared to the contemporary planar CMOS technology is performed. The large-signal performance of the device is evaluated using the developed model and validated with the measured data. Finally, a concise overview of the performance indicators associated with the modeled device is also presented.


  • Characterization and Modeling of 14-/16-nm FinFET-Based LDMOS

    by Anirban Kar, Shivendra Singh Parihar, Jun Z. Huang, Huilong Zhang, Weike Wang, Kimihiko Imura, Yogesh Singh Chauhan

    Due to the significant advancement of system-on-chip (SoC) based architectures in IC technology, FinFET-based laterally diffused MOS (LDMOS) FETs are crucial for integrating high-voltage (HV) devices with low-voltage (LV) FinFET-based digital systems. We have performed on-wafer characterization of the state-of-the-art production level 14-/16-nm FinFET-based LDMOS devices. Industry-standard FinFET’s compact model Berkeley short-channel IGFET model-common multigate (BSIM-CMG) 111.1.0 cannot model the electrical characteristics of these devices accurately. We have developed a physics-based compact model for the overlap charge and voltage-dependent resistance of the drift region. The proposed model has been implemented in Verilog-A and added to the existing BSIM-CMG model. The improved BSIM-CMG model shows excellent agreement with the experimental data for the transcapacitances, current, and its derivatives. To the best of our knowledge, this is the first charge-based compact model presented for multigate LDMOS devices.