Laisheng Huang
Research Subjects
Laisheng Huang has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Bing Wu
School of Emergency Management and Safety Engineering, China University of Mining and Technology (Beijing), Beijing, China
5 shared publications - Chao Li4 shared publications
Bing Wu
3 shared publications- Bo Li
State Key Laboratory Cultivation Base for Gas Geology and Gas Control, Henan Polytechnic University, Jiaozuo 454000, China
3 shared publications Haiwei Cai
3 shared publications- Jingxin Wang
School of Emergency Management and Safety Engineering, China University of Mining and Technology (Beijing), Beijing, China
3 shared publications
Latest Publications
- 1 September 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (9)
Study on the seepage diffusion characteristics and sealing mechanism of water-based foam in loose media
Goaf air leakage is the primary cause of spontaneous combustion in loose residual coal, which not only poses serious threats to the safe production of coal resources but also contributes to environmental pollution. Sealing air leakage in goafs is a critical measure in the prevention of coal spontaneous combustion. Owing to the excellent diffusion capability of aqueous foam, dynamic foam injection into goafs can be employed to seal leakage channels in real time, thereby mitigating spontaneous combustion in loose residual coal. This study investigates the seepage, diffusion, and sealing mechanisms of foam in loose media through liquid drainage and injection diffusion experiments. Results show that foam decay is primarily influenced by liquid film interaction, medium support, and gravitational effects. The medium's support mitigates gravity-induced decay, while uniform liquid film and bubble distribution enhance foam stability. Foam seepage and diffusion in loose media create a more uniform system, improving sealing effectiveness. The foam half-life can reach 43 min, more than twice that in an atmospheric environment. The foam injection sealing process in loose media can be divided into three stages: foam injection stage, stable seepage stage, and low-seepage stage. Furthermore, the seepage diffusion and sealing mechanisms of foam in loose media were discussed, along with the engineering application of foam for goaf air leakage sealing and coal spontaneous combustion prevention during mine stoppages. The findings of this study provide new insights and a theoretical foundation for applying foam in the prevention of spontaneous combustion in loose residual coal within goafs.
- 1 September 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (9)
Study on the seepage diffusion characteristics and sealing mechanism of water-based foam in loose media
Goaf air leakage is the primary cause of spontaneous combustion in loose residual coal, which not only poses serious threats to the safe production of coal resources but also contributes to environmental pollution. Sealing air leakage in goafs is a critical measure in the prevention of coal spontaneous combustion. Owing to the excellent diffusion capability of aqueous foam, dynamic foam injection into goafs can be employed to seal leakage channels in real time, thereby mitigating spontaneous combustion in loose residual coal. This study investigates the seepage, diffusion, and sealing mechanisms of foam in loose media through liquid drainage and injection diffusion experiments. Results show that foam decay is primarily influenced by liquid film interaction, medium support, and gravitational effects. The medium's support mitigates gravity-induced decay, while uniform liquid film and bubble distribution enhance foam stability. Foam seepage and diffusion in loose media create a more uniform system, improving sealing effectiveness. The foam half-life can reach 43 min, more than twice that in an atmospheric environment. The foam injection sealing process in loose media can be divided into three stages: foam injection stage, stable seepage stage, and low-seepage stage. Furthermore, the seepage diffusion and sealing mechanisms of foam in loose media were discussed, along with the engineering application of foam for goaf air leakage sealing and coal spontaneous combustion prevention during mine stoppages. The findings of this study provide new insights and a theoretical foundation for applying foam in the prevention of spontaneous combustion in loose residual coal within goafs.
- 1 September 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (9)
Experimental study on the effects of inert gases on methane explosion characteristics in a loose medium environment
Gas explosion accidents are one of the major disasters threatening mine safety. The goaf areas in coal mines consist of loose media composed of fragmented coal and rock. Their strong concealment and destructive potential make the prevention and control of gas explosion accidents particularly challenging. In this paper, controlled experiments on methane explosions in loose media were conducted to investigate the variation of explosion characteristics under different inert gas environments, and to discuss the coupling mechanism by which inert gases and loose media influence methane explosion reactions. The results indicate that as the gas concentration increases, both the peak explosion overpressure and the maximum pressure rise rate of methane explosions in loose media tend to decrease. At the same concentration, CO2 is more effective than N2 in suppressing methane explosions in loose media. The maximum difference between the suppression rates of explosion overpressure by CO2 and N2 is 25.36%, with a maximum difference of 9.89% observed in the loose media. When the porosities are 0.504 and 0.534, the combined suppression effect of inert gases and loose media on methane explosion characteristics is better than that of either factor alone. At a porosity of 0.602, the promoting effect of loose media on methane explosions becomes more pronounced; however, as the concentration of inert gases increases, this promoting effect is significantly weakened. Moreover, with increasing inert gas concentration, the KG value of methane explosions in loose media shows a decreasing trend. When the porosities are 0.504 and 0.534, the KG value in loose media is only 3.27%–29.71% of that in a cavity, while at a porosity of 0.602, the KG value increases significantly to approximately 105.65%–450.03% of that in a cavity. N2 at concentrations of 5% and 10% has little effect on the KG value, whereas both N2 and CO2 at a concentration of 15% exhibit good explosion suppression effects. This work provides a theoretical basis for the formulation of prevention and control measures for gas explosion accidents in coal mine goaf areas.
- 1 September 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (9)
Experimental study on the effects of inert gases on methane explosion characteristics in a loose medium environment
Gas explosion accidents are one of the major disasters threatening mine safety. The goaf areas in coal mines consist of loose media composed of fragmented coal and rock. Their strong concealment and destructive potential make the prevention and control of gas explosion accidents particularly challenging. In this paper, controlled experiments on methane explosions in loose media were conducted to investigate the variation of explosion characteristics under different inert gas environments, and to discuss the coupling mechanism by which inert gases and loose media influence methane explosion reactions. The results indicate that as the gas concentration increases, both the peak explosion overpressure and the maximum pressure rise rate of methane explosions in loose media tend to decrease. At the same concentration, CO2 is more effective than N2 in suppressing methane explosions in loose media. The maximum difference between the suppression rates of explosion overpressure by CO2 and N2 is 25.36%, with a maximum difference of 9.89% observed in the loose media. When the porosities are 0.504 and 0.534, the combined suppression effect of inert gases and loose media on methane explosion characteristics is better than that of either factor alone. At a porosity of 0.602, the promoting effect of loose media on methane explosions becomes more pronounced; however, as the concentration of inert gases increases, this promoting effect is significantly weakened. Moreover, with increasing inert gas concentration, the KG value of methane explosions in loose media shows a decreasing trend. When the porosities are 0.504 and 0.534, the KG value in loose media is only 3.27%–29.71% of that in a cavity, while at a porosity of 0.602, the KG value increases significantly to approximately 105.65%–450.03% of that in a cavity. N2 at concentrations of 5% and 10% has little effect on the KG value, whereas both N2 and CO2 at a concentration of 15% exhibit good explosion suppression effects. This work provides a theoretical basis for the formulation of prevention and control measures for gas explosion accidents in coal mine goaf areas.
- 1 August 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (8)
Experimental study on CH4/air premixed gas explosion in loose media
The goaf in coal mines is composed of loose media formed by fragmented coal and rock, and the explosion characteristics of gas within such loose media differ significantly from those in free spaces. In this paper, methane explosion experiments in loose media were conducted to investigate the influence of porosity on the explosion characteristics of methane. The results indicate that under the current conditions, the inhibition rate of explosion pressure and pressure rise rate by the porosity of the loose media generally follow an exponential decay trend. At a porosity of approximately 0.567, the loose media changes from inhibiting to promoting the pressure rise rate generated by the explosion. At a porosity of approximately 0.613, the loose media shifts from inhibiting to promoting the explosion pressure of methane, and the exponential decay relationship between pressure decay rate and porosity may be disrupted. Heat loss and turbulent disturbances are important factors affecting the explosion characteristics of methane in loose media. When the effect of heat loss exceeds that of turbulence disturbances, the loose media significantly suppress the methane explosion; compared to methane explosions in a cavity, the overpressure peak is reduced by 81.82% –93.14%. Conversely, when turbulent disturbances are the primary influencing factor, the loose media can promote the methane explosion reaction process; in loose media with a porosity of 0.602, the maximum rate of pressure rise of the methane explosion is 134.96% higher than that in a cavity, and the deflagration index is 99.43% higher.
- 1 August 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (8)
Experimental study on CH4/air premixed gas explosion in loose media
The goaf in coal mines is composed of loose media formed by fragmented coal and rock, and the explosion characteristics of gas within such loose media differ significantly from those in free spaces. In this paper, methane explosion experiments in loose media were conducted to investigate the influence of porosity on the explosion characteristics of methane. The results indicate that under the current conditions, the inhibition rate of explosion pressure and pressure rise rate by the porosity of the loose media generally follow an exponential decay trend. At a porosity of approximately 0.567, the loose media changes from inhibiting to promoting the pressure rise rate generated by the explosion. At a porosity of approximately 0.613, the loose media shifts from inhibiting to promoting the explosion pressure of methane, and the exponential decay relationship between pressure decay rate and porosity may be disrupted. Heat loss and turbulent disturbances are important factors affecting the explosion characteristics of methane in loose media. When the effect of heat loss exceeds that of turbulence disturbances, the loose media significantly suppress the methane explosion; compared to methane explosions in a cavity, the overpressure peak is reduced by 81.82% –93.14%. Conversely, when turbulent disturbances are the primary influencing factor, the loose media can promote the methane explosion reaction process; in loose media with a porosity of 0.602, the maximum rate of pressure rise of the methane explosion is 134.96% higher than that in a cavity, and the deflagration index is 99.43% higher.
- 1 June 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (6)
Research progress and knowledge mapping analysis of air leakage control in gob areas: A CiteSpace-based visual study
Coal has long been a cornerstone of both China's and the global energy systems, significantly contributing to energy supply and economic development. However, large-scale mining has exacerbated air leakage in gob areas, intensifying the risks of spontaneous coal combustion and gas accumulation, thus challenging mine safety and environmental management. Investigating air leakage control in gob areas is vital for improving safety management, optimizing disaster prevention, and promoting sustainable mining practices. This study conducts a knowledge mapping analysis on air leakage control using CiteSpace, with data from the Web of Science Core Collection spanning 2000–2024. The analysis reveals a surge in research interest since 2018, with China, the United States, and Australia as the leading contributors. China University of Mining and Technology, Xi'an University of Science and Technology, and Henan Polytechnic University stand out for their academic influence, with the former being the most prominent contributor. Keyword and burst analysis highlights ongoing research foci, such as “coal spontaneous combustion,” “air leakage,” and “gob,” while emerging topics like “oxidation,” “behavior,” and “extraction” are gaining traction. Future advancements in gob area sealing technologies will focus on efficiency, intelligence, and environmental sustainability. Innovations in sealing materials, intelligent monitoring, and the integration of big data and AI for decision-making will drive progress in this field. The study provides valuable insights for future research directions on air leakage control in gob areas.
- 1 June 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (6)
Research progress and knowledge mapping analysis of air leakage control in gob areas: A CiteSpace-based visual study
Coal has long been a cornerstone of both China's and the global energy systems, significantly contributing to energy supply and economic development. However, large-scale mining has exacerbated air leakage in gob areas, intensifying the risks of spontaneous coal combustion and gas accumulation, thus challenging mine safety and environmental management. Investigating air leakage control in gob areas is vital for improving safety management, optimizing disaster prevention, and promoting sustainable mining practices. This study conducts a knowledge mapping analysis on air leakage control using CiteSpace, with data from the Web of Science Core Collection spanning 2000–2024. The analysis reveals a surge in research interest since 2018, with China, the United States, and Australia as the leading contributors. China University of Mining and Technology, Xi'an University of Science and Technology, and Henan Polytechnic University stand out for their academic influence, with the former being the most prominent contributor. Keyword and burst analysis highlights ongoing research foci, such as “coal spontaneous combustion,” “air leakage,” and “gob,” while emerging topics like “oxidation,” “behavior,” and “extraction” are gaining traction. Future advancements in gob area sealing technologies will focus on efficiency, intelligence, and environmental sustainability. Innovations in sealing materials, intelligent monitoring, and the integration of big data and AI for decision-making will drive progress in this field. The study provides valuable insights for future research directions on air leakage control in gob areas.
- 1 May 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (5)
Experimental study on the phase change–seepage coupling mechanism of liquid nitrogen in loose media
The phase change and diffusion behavior of liquid nitrogen in loose media is a key scientific issue for improving the efficiency of mine fire prevention and extinguishing technologies. This study systematically investigates the coupling mechanism of phase change and seepage during the transient flow of liquid nitrogen using a self-developed liquid nitrogen seepage experimental platform. The results indicate that during liquid nitrogen injection, the vapor lock phenomenon, significantly influenced by the combined effect of vaporization expansion force and gravity, inhibits seepage and leads to a non-uniform temperature distribution. The self-enhancing flow effect induced by the phase change process results in a significantly negative non-Darcy factor. Experimental data show that increasing the injection pipe diameter and particle size reduces inertial resistance, leading to a decrease in the absolute value of the non-Darcy factor. Conversely, when the particle size decreases, the influence of phase change increases, causing the permeability of liquid nitrogen to rise with decreasing particle size. Furthermore, multi-parameter correlation analysis provides deeper insights into the dynamic coupling mechanism of phase change and seepage in loose media. Based on the experimental findings, this study proposes an optimized liquid nitrogen injection strategy for fire prevention and control in coal mine goafs. The research findings establish a theoretical framework for the phase change–seepage coupling dynamics of liquid nitrogen in loose media, providing a theoretical foundation for fire prevention and control in goafs under complex geological conditions.
- 1 May 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (5)
Experimental study on the phase change–seepage coupling mechanism of liquid nitrogen in loose media
The phase change and diffusion behavior of liquid nitrogen in loose media is a key scientific issue for improving the efficiency of mine fire prevention and extinguishing technologies. This study systematically investigates the coupling mechanism of phase change and seepage during the transient flow of liquid nitrogen using a self-developed liquid nitrogen seepage experimental platform. The results indicate that during liquid nitrogen injection, the vapor lock phenomenon, significantly influenced by the combined effect of vaporization expansion force and gravity, inhibits seepage and leads to a non-uniform temperature distribution. The self-enhancing flow effect induced by the phase change process results in a significantly negative non-Darcy factor. Experimental data show that increasing the injection pipe diameter and particle size reduces inertial resistance, leading to a decrease in the absolute value of the non-Darcy factor. Conversely, when the particle size decreases, the influence of phase change increases, causing the permeability of liquid nitrogen to rise with decreasing particle size. Furthermore, multi-parameter correlation analysis provides deeper insights into the dynamic coupling mechanism of phase change and seepage in loose media. Based on the experimental findings, this study proposes an optimized liquid nitrogen injection strategy for fire prevention and control in coal mine goafs. The research findings establish a theoretical framework for the phase change–seepage coupling dynamics of liquid nitrogen in loose media, providing a theoretical foundation for fire prevention and control in goafs under complex geological conditions.
- 1 June 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (6)
Analysis of the influence of temperature on the adsorption characteristics of coal: Insights into low-temperature outburst prevention
To investigate the impact of temperature reduction on the adsorption characteristics of coal gas, isothermal adsorption experiments were conducted with environmental temperature and moisture content as variables. The changing patterns of coal gas adsorption characteristics, adsorption theories, and the temperature response of gas expansion were analyzed. Furthermore, engineering measures for preventing gas outbursts in low-temperature frozen coal seams were discussed. The research findings indicate that the gas adsorption capacity of coal samples increases with decreasing temperature. When the temperature decreases from 20 to −20 °C, the gas adsorption capacity decreases from 34.48 to 19.90 cm3/g. At the same pressure, the adsorption capacity of coal is negatively correlated with temperature. The Langmuir theoretical model better reflects the adsorption law of coal gas under different environmental temperature conditions, wherein the adsorption constant “a” gradually decreases with the increase in environmental temperature. In a closed space, the gas pressure decreases with the decrease in coal sample temperature. Under the new adsorption equilibrium, the gas pressure in the coal sample tank decreases linearly with temperature. Coal samples with different moisture contents exhibit varying degrees of decrease in gas pressure at the same temperature, with higher moisture content resulting in a smaller decrease in gas pressure. Gas expansion energy decreases linearly with the decrease in coal temperature, indicating a proportional relationship between gas expansion energy and coal gas release pressure. As the temperature decreases, the gas pressure decreases. Based on the experimental results, a synergistic approach for preventing gas outbursts through low-temperature freezing is proposed.
- 1 June 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (6)
Analysis of the influence of temperature on the adsorption characteristics of coal: Insights into low-temperature outburst prevention
To investigate the impact of temperature reduction on the adsorption characteristics of coal gas, isothermal adsorption experiments were conducted with environmental temperature and moisture content as variables. The changing patterns of coal gas adsorption characteristics, adsorption theories, and the temperature response of gas expansion were analyzed. Furthermore, engineering measures for preventing gas outbursts in low-temperature frozen coal seams were discussed. The research findings indicate that the gas adsorption capacity of coal samples increases with decreasing temperature. When the temperature decreases from 20 to −20 °C, the gas adsorption capacity decreases from 34.48 to 19.90 cm3/g. At the same pressure, the adsorption capacity of coal is negatively correlated with temperature. The Langmuir theoretical model better reflects the adsorption law of coal gas under different environmental temperature conditions, wherein the adsorption constant “a” gradually decreases with the increase in environmental temperature. In a closed space, the gas pressure decreases with the decrease in coal sample temperature. Under the new adsorption equilibrium, the gas pressure in the coal sample tank decreases linearly with temperature. Coal samples with different moisture contents exhibit varying degrees of decrease in gas pressure at the same temperature, with higher moisture content resulting in a smaller decrease in gas pressure. Gas expansion energy decreases linearly with the decrease in coal temperature, indicating a proportional relationship between gas expansion energy and coal gas release pressure. As the temperature decreases, the gas pressure decreases. Based on the experimental results, a synergistic approach for preventing gas outbursts through low-temperature freezing is proposed.
- 2 March 2023
- Published by Elsevier in Engineering Fracture Mechanics
- Vol. 282
Study on mechanical properties and energy evolution of coal under liquid nitrogen freezing
- 2 March 2023
- Published by Elsevier in Engineering Fracture Mechanics
- Vol. 282
Study on mechanical properties and energy evolution of coal under liquid nitrogen freezing