Kia Wai Liew
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kia Wai Liew has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Poh Kiat Ng
Faculty of Engineering & Technology, Multimedia University, Melaka, Malaysia
10 shared publications - Chai Hua Tay
Centre for Advanced Mechanical and Green Technology (CAMGT), CoE for Robotics and Sensing Technologies, Multimedia University, Jalan Ayer Keroh Lama, Bukit Beruang, Melaka 75450, Malaysia
6 shared publications - Chee Kuang Kok
Centre for Advanced Mechanical and Green Technology, Faculty of Engineering and Technology, Multimedia University, Melaka, Malaysia
6 shared publications - Boon Kian Lim
Faculty of Engineering and Technology, Multimedia University, Jalan Ayer Keroh Lama, Bukit Beruang, Melaka 75450, Malaysia
5 shared publications - Jian Ai Yeow
Multimedia University
5 shared publications - Peng Lean Chong
School of Engineering and Computing, MILA University, No 1, MIU Boulevard, Putra Nilai, Nilai 71800, Malaysia
5 shared publications
Latest Publications
- Open Access
- 28 September 2025
- Published by MDPI AG in Inventions
- Vol. 10  (5) , 87
TRIZ-Based Conceptual Enhancement of a Multifunctional Rollator Walker Design Integrating Wheelchair, Pilates Chair, and Stepladder
The development of a multifunctional invention requires several refinements for optimizing each function. This study presents a Theory of Inventive Problem Solving (TRIZ)-based conceptual framework for enhancing an innovative multifunctional assistive technology device that integrates the functionalities of a rollator walker, wheelchair, Pilates chair, and stepladder. The limitations of the multifunctional rollator walker were identified from the user feedback of a foundational work and were then addressed by identifying the engineering and physical contradictions and problem modeling using Su-field analysis. Through TRIZ Inventive Principles, the proposed design eliminates common trade-offs between portability, stability, and usability. The conceptual enhancement incorporates features such as deployable steps, the utilization of high strength–to–weight ratio material, foldability, a passive mechanical brake-locking system, retractable armrests, the incorporation of spring-assist hinges, and the use of large tires with vibration-dampening hubs. This study contributes a novel, user-focused, and space-saving mobility solution that aligns with the evolving demands of assistive technology, laying the groundwork for future iterations involving smart control, power assist, and modular enhancements.
- 28 September 2025
- Published by MDPI AG in Inventions
- Vol. 10  (5) , 87
Open AccessTRIZ-Based Conceptual Enhancement of a Multifunctional Rollator Walker Design Integrating Wheelchair, Pilates Chair, and Stepladder
The development of a multifunctional invention requires several refinements for optimizing each function. This study presents a Theory of Inventive Problem Solving (TRIZ)-based conceptual framework for enhancing an innovative multifunctional assistive technology device that integrates the functionalities of a rollator walker, wheelchair, Pilates chair, and stepladder. The limitations of the multifunctional rollator walker were identified from the user feedback of a foundational work and were then addressed by identifying the engineering and physical contradictions and problem modeling using Su-field analysis. Through TRIZ Inventive Principles, the proposed design eliminates common trade-offs between portability, stability, and usability. The conceptual enhancement incorporates features such as deployable steps, the utilization of high strength–to–weight ratio material, foldability, a passive mechanical brake-locking system, retractable armrests, the incorporation of spring-assist hinges, and the use of large tires with vibration-dampening hubs. This study contributes a novel, user-focused, and space-saving mobility solution that aligns with the evolving demands of assistive technology, laying the groundwork for future iterations involving smart control, power assist, and modular enhancements.
- Open Access
- 12 September 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15  (18) , 10002
Development of a Wearable Walking and Standing Aid for Elderly People
Wearable walking and standing aids have emerged as promising assistive technology devices to support elderly people in promoting mobility for sustainable healthy ageing. However, there is lack of research in this area, which necessitates the present work. In this study, a wearable walking and standing aid was developed for elderly people using the Design for Manufacture and Assembly (DFMA) method, and the device was tested for its effectiveness based on lifting capability. Through a series of engineering design processes, including conceptual design, detailed design, simulation, analysis, fabrication, and assembly, a prototype was developed and tested. The results reveal that the prototype, which supports thighs and calves, is capable of helping the user to stand and sit. The experimental results indicated a lifting capability surpassing the expected theoretical model by almost 43%. Nevertheless, several recommendations are suggested to further improve the prototype in an effort to develop a more effective and reliable wearable walking and standing aid for elderly people.
- 12 September 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15  (18) , 10002
Open AccessDevelopment of a Wearable Walking and Standing Aid for Elderly People
Wearable walking and standing aids have emerged as promising assistive technology devices to support elderly people in promoting mobility for sustainable healthy ageing. However, there is lack of research in this area, which necessitates the present work. In this study, a wearable walking and standing aid was developed for elderly people using the Design for Manufacture and Assembly (DFMA) method, and the device was tested for its effectiveness based on lifting capability. Through a series of engineering design processes, including conceptual design, detailed design, simulation, analysis, fabrication, and assembly, a prototype was developed and tested. The results reveal that the prototype, which supports thighs and calves, is capable of helping the user to stand and sit. The experimental results indicated a lifting capability surpassing the expected theoretical model by almost 43%. Nevertheless, several recommendations are suggested to further improve the prototype in an effort to develop a more effective and reliable wearable walking and standing aid for elderly people.
- Open Access
- 16 July 2025
- Published by MDPI AG in Inventions
- Vol. 10  (4) , 57
An Innovative Solution for Stair Climbing: A Conceptual Design and Analysis of a Tri-Wheeled Trolley with Motorized, Adjustable, and Foldable Features
The objective of this study is to design, develop, and analyze a tri-wheeled trolley integrated with a motor that incorporates adjustable and foldable features. The purpose of a trolley is to allow users to easily transport items from one place to another. However, problems arise when transporting objects across challenging surfaces, such as up a flight of stairs, using a conventional cart. This innovation uses multiple engineering skills to determine and develop the best possible design for a stair-climbing trolley. A tri-wheel mechanism is integrated into its motorized design, meticulously engineered for adjustability, ensuring compatibility with a wide range of staircase dimensions. The designed trolley was constructed considering elements and processes such as a literature review, conceptual design, concept screening, concept scoring, 3D modelling, engineering design calculations, and simulations. The trolley was tested, and the measured pulling force data were compared with the theoretical calculations. A graph of the pulling force vs. load was plotted, in which both datasets showed similar increasing trends; hence, the designed trolley worked as expected. The development of this stair-climbing trolley can benefit people living in rural areas or low-cost buildings that are not equipped with elevators and can reduce injuries among the elderly. The designed stair-climbing trolley will not only minimize the user’s physical effort but also enhance safety. On top of that, the adjustable and foldable features of the stair-climbing trolley would benefit users living in areas with limited space.
- 16 July 2025
- Published by MDPI AG in Inventions
- Vol. 10  (4) , 57
Open AccessAn Innovative Solution for Stair Climbing: A Conceptual Design and Analysis of a Tri-Wheeled Trolley with Motorized, Adjustable, and Foldable Features
The objective of this study is to design, develop, and analyze a tri-wheeled trolley integrated with a motor that incorporates adjustable and foldable features. The purpose of a trolley is to allow users to easily transport items from one place to another. However, problems arise when transporting objects across challenging surfaces, such as up a flight of stairs, using a conventional cart. This innovation uses multiple engineering skills to determine and develop the best possible design for a stair-climbing trolley. A tri-wheel mechanism is integrated into its motorized design, meticulously engineered for adjustability, ensuring compatibility with a wide range of staircase dimensions. The designed trolley was constructed considering elements and processes such as a literature review, conceptual design, concept screening, concept scoring, 3D modelling, engineering design calculations, and simulations. The trolley was tested, and the measured pulling force data were compared with the theoretical calculations. A graph of the pulling force vs. load was plotted, in which both datasets showed similar increasing trends; hence, the designed trolley worked as expected. The development of this stair-climbing trolley can benefit people living in rural areas or low-cost buildings that are not equipped with elevators and can reduce injuries among the elderly. The designed stair-climbing trolley will not only minimize the user’s physical effort but also enhance safety. On top of that, the adjustable and foldable features of the stair-climbing trolley would benefit users living in areas with limited space.
- Open Access
- 5 June 2025
- Published by MDPI AG in Inventions
- Vol. 10  (3) , 42
A Smart Hydration Device for Children: Leveraging TRIZ Methodology to Combat Dehydration and Enhance Cognitive Performance
Amid globalization and rising global temperatures, dehydration has emerged as a critical issue, especially for children who are more vulnerable due to their higher body surface-to-weight ratio. The issue is even more concerning given that adequate water intake is important for cognitive development, particularly in children since brain development is critical during early years. This study addressed this challenge by, first, designing a smart hydration device based on the Theory of Inventive Problem Solving (TRIZ). Then, this study proceeded with prototyping and testing the smart hydration device to promote increased daily water intake among Malaysian children. The device demonstrated improved water consumption and increased drinking frequency among children. Additionally, the children displayed improved cognitive performance. However, this study was limited to a specific age group and the device requires adult supervision for charging. Therefore, further research is necessary to tackle these limitations. Nevertheless, this smart device represents a promising step forward in fostering better hydration habits among children.
- 5 June 2025
- Published by MDPI AG in Inventions
- Vol. 10  (3) , 42
Open AccessA Smart Hydration Device for Children: Leveraging TRIZ Methodology to Combat Dehydration and Enhance Cognitive Performance
Amid globalization and rising global temperatures, dehydration has emerged as a critical issue, especially for children who are more vulnerable due to their higher body surface-to-weight ratio. The issue is even more concerning given that adequate water intake is important for cognitive development, particularly in children since brain development is critical during early years. This study addressed this challenge by, first, designing a smart hydration device based on the Theory of Inventive Problem Solving (TRIZ). Then, this study proceeded with prototyping and testing the smart hydration device to promote increased daily water intake among Malaysian children. The device demonstrated improved water consumption and increased drinking frequency among children. Additionally, the children displayed improved cognitive performance. However, this study was limited to a specific age group and the device requires adult supervision for charging. Therefore, further research is necessary to tackle these limitations. Nevertheless, this smart device represents a promising step forward in fostering better hydration habits among children.
- Open Access
A Review of the Performance of Smart Lawnmower Development: Theoretical and Practical Implications
Smart lawnmowers are becoming increasingly integrated into daily life as their performance continues to improve. To ensure consistent advancement, it is important to conduct a comprehensive analysis of the performance of various modern smart lawnmowers. However, there appears to be a lack of thorough performance evaluation and analysis of their broader impact. This review explores the key performance indicators influencing smart lawnmower performance, particularly in navigation and obstacle avoidance, operational efficiency, and human–machine interaction (HMI). Key performance indicators identified for evaluation include operating time, Effective Field Capacity (FCe), and field efficiency (%). Additionally, it examines the theoretical and practical implications of smart lawnmower development. Smart lawnmowers have been found to contribute to advancements in machine learning algorithms and possibly swarm robotics. Environmental benefits, such as reduced emissions and noise pollution, were also highlighted in this review. Future research directions are discussed, both in the short and long term, to further optimize smart lawnmower performance. This review serves as a foundation for future studies and experimental investigations aimed at enhancing the real-world applicability of smart lawnmowers.
Open AccessA Review of the Performance of Smart Lawnmower Development: Theoretical and Practical Implications
Smart lawnmowers are becoming increasingly integrated into daily life as their performance continues to improve. To ensure consistent advancement, it is important to conduct a comprehensive analysis of the performance of various modern smart lawnmowers. However, there appears to be a lack of thorough performance evaluation and analysis of their broader impact. This review explores the key performance indicators influencing smart lawnmower performance, particularly in navigation and obstacle avoidance, operational efficiency, and human–machine interaction (HMI). Key performance indicators identified for evaluation include operating time, Effective Field Capacity (FCe), and field efficiency (%). Additionally, it examines the theoretical and practical implications of smart lawnmower development. Smart lawnmowers have been found to contribute to advancements in machine learning algorithms and possibly swarm robotics. Environmental benefits, such as reduced emissions and noise pollution, were also highlighted in this review. Future research directions are discussed, both in the short and long term, to further optimize smart lawnmower performance. This review serves as a foundation for future studies and experimental investigations aimed at enhancing the real-world applicability of smart lawnmowers.
- Open Access
- 1 May 2025
- Published by Learning Gate in Edelweiss Applied Science and Technology
- Vol. 9  (5) , 2700-2716
Stackable pallet-shaped triboelectric nanogenerator for water wave energy harvesting
Water wave energy is a vast and underutilized renewable resource. It has the potential to power distributed devices in marine environments. Triboelectric nanogenerators (TENGs) have emerged as a reliable technology for harvesting low-frequency and irregular mechanical energy from natural sources like ocean waves. Herein, a stackable pallet-shaped triboelectric nanogenerator (SP-TENG) is proposed for water wave energy harvesting. The SP-TENG is based on a stackable pallet-inspired structure, offering a modular and scalable platform for converting low-frequency motion into usable electrical energy. By utilizing the solid-solid freestanding triboelectric layer mode, the SP-TENG is able to generate electricity through periodic contact and separation between triboelectric materials. In this paper, two different types of SP-TENGs are designed and tested, each using different triboelectric material configurations in the sliding components. Polytetrafluoroethylene (PTFE) and aluminum were chosen for their strong triboelectric polarity difference, which enables efficient charge generation. One prototype uses solid PTFE plates, while the other uses aluminum-coated sliding components. The main goal is to compare their performance in energy generation under simulated wave conditions. All experiments were conducted using manual sliding motion at approximately 1 Hz to mimic low-frequency wave excitation. The maximum voltage achieved by the best-performing SP-TENG is 4 V. An SP-TENG is able to power 93 LEDs as well as other small electronic devices. Therefore, the SP-TENG is proven to be an effective solution for harvesting water wave energy and powering various marine applications in the future.
- 1 May 2025
- Published by Learning Gate in Edelweiss Applied Science and Technology
- Vol. 9  (5) , 2700-2716
Open AccessStackable pallet-shaped triboelectric nanogenerator for water wave energy harvesting
Water wave energy is a vast and underutilized renewable resource. It has the potential to power distributed devices in marine environments. Triboelectric nanogenerators (TENGs) have emerged as a reliable technology for harvesting low-frequency and irregular mechanical energy from natural sources like ocean waves. Herein, a stackable pallet-shaped triboelectric nanogenerator (SP-TENG) is proposed for water wave energy harvesting. The SP-TENG is based on a stackable pallet-inspired structure, offering a modular and scalable platform for converting low-frequency motion into usable electrical energy. By utilizing the solid-solid freestanding triboelectric layer mode, the SP-TENG is able to generate electricity through periodic contact and separation between triboelectric materials. In this paper, two different types of SP-TENGs are designed and tested, each using different triboelectric material configurations in the sliding components. Polytetrafluoroethylene (PTFE) and aluminum were chosen for their strong triboelectric polarity difference, which enables efficient charge generation. One prototype uses solid PTFE plates, while the other uses aluminum-coated sliding components. The main goal is to compare their performance in energy generation under simulated wave conditions. All experiments were conducted using manual sliding motion at approximately 1 Hz to mimic low-frequency wave excitation. The maximum voltage achieved by the best-performing SP-TENG is 4 V. An SP-TENG is able to power 93 LEDs as well as other small electronic devices. Therefore, the SP-TENG is proven to be an effective solution for harvesting water wave energy and powering various marine applications in the future.
- Open Access
Design and Development of a Multifunctional Stepladder: Usability, Sustainability, and Cost-Effectiveness
This study presents the design, development, and evaluation of a multifunctional stepladder that integrates four functionalities: a stepladder, Pilates chair, wheelchair, and walking aid. Unlike existing research that focuses on single-function assistive devices, this study uniquely integrates a stepladder, wheelchair, walking aid, and Pilates chair into one multifunctional device, offering a compact, space-saving solution that addresses multiple daily needs in a single design. Building upon previous research, which conceptualized a multifunctional stepladder by synthesizing ideas, features, and functions from patent literature, existing products, and scientific articles, this study focuses on the design and testing phases to refine and validate the concept. Using sustainable materials like mild steel and aluminium, the design was optimized through structural simulations, ensuring durability under loads of up to 100 kg. Usability tests revealed that the invention significantly reduced task completion times, saved five times the space compared to single-function products, and provided enhanced versatility. Cost analysis highlighted its affordability, with a retail price of MYR 1392—approximately 35% lower than the combined cost of its single-function counterparts. Participant feedback noted strengths such as eco-friendliness, practicality, and ergonomic design, alongside areas for improvement, including portability, armrests, and storage. Future work includes enhanced portability for stair navigation, outdoor usability tests, and integration of smart technologies. This multifunctional stepladder significantly contributes to caregivers by reducing the physical burden of managing multiple assistive devices, enhancing efficiency in daily caregiving tasks, and providing a safer, more convenient tool that supports both mobility and exercise for elderly users. This multifunctional stepladder also offers a sustainable, cost-effective, and user-centric solution, addressing usability gaps while supporting global sustainability and accessibility initiatives.
Open AccessDesign and Development of a Multifunctional Stepladder: Usability, Sustainability, and Cost-Effectiveness
This study presents the design, development, and evaluation of a multifunctional stepladder that integrates four functionalities: a stepladder, Pilates chair, wheelchair, and walking aid. Unlike existing research that focuses on single-function assistive devices, this study uniquely integrates a stepladder, wheelchair, walking aid, and Pilates chair into one multifunctional device, offering a compact, space-saving solution that addresses multiple daily needs in a single design. Building upon previous research, which conceptualized a multifunctional stepladder by synthesizing ideas, features, and functions from patent literature, existing products, and scientific articles, this study focuses on the design and testing phases to refine and validate the concept. Using sustainable materials like mild steel and aluminium, the design was optimized through structural simulations, ensuring durability under loads of up to 100 kg. Usability tests revealed that the invention significantly reduced task completion times, saved five times the space compared to single-function products, and provided enhanced versatility. Cost analysis highlighted its affordability, with a retail price of MYR 1392—approximately 35% lower than the combined cost of its single-function counterparts. Participant feedback noted strengths such as eco-friendliness, practicality, and ergonomic design, alongside areas for improvement, including portability, armrests, and storage. Future work includes enhanced portability for stair navigation, outdoor usability tests, and integration of smart technologies. This multifunctional stepladder significantly contributes to caregivers by reducing the physical burden of managing multiple assistive devices, enhancing efficiency in daily caregiving tasks, and providing a safer, more convenient tool that supports both mobility and exercise for elderly users. This multifunctional stepladder also offers a sustainable, cost-effective, and user-centric solution, addressing usability gaps while supporting global sustainability and accessibility initiatives.
- Open Access
- 3 April 2025
- Published by Engineering, Technology & Applied Science Research in Engineering, Technology & Applied Science Research
- Vol. 15  (2) , 22004-22014
Micro-Friction Stir Lap Welding of Aluminum and Copper: A Short Review
This review article examines the recent progress in Micro-Friction Stir Lap Welding (ÎĽFSLW) of Al-Cu thin sheets, comparing the differences in tool geometry and processing parameters of macro-scale and micro-scale Friction Stir Lap Welding (FSLW) of Al-Cu plates. The effect of microstructural evolution, intermetallic formation, hardness distribution, mechanical joint strength, and electrical conductivity is discussed in detail. The most common defects in ÎĽFSLW, such as voids, tunnel defects, and hook formations, along with their impact on heat input and tool movement, are examined. Additionally, strategies to improve joint quality, including the addition of engineering interlayers (e.g. zinc foil) and nanoparticles (e.g. graphene), are explored as they mitigate brittle IMCs, improve grain structure, and enhance both mechanical and electrical properties. Important research gaps, regarding the effects of tool tilt angles and complex tool profiles on the mechanical and electrical joint properties, are highlighted as the potential benefits of assistive technologies, such as ultrasonic vibration, assistive heating and cooling, and assistive magnetic field. Future work is essential to enhance the ÎĽFSLW of Al-Cu, investigating complex tool geometries, and improving process parameters.
- 3 April 2025
- Published by Engineering, Technology & Applied Science Research in Engineering, Technology & Applied Science Research
- Vol. 15  (2) , 22004-22014
Open AccessMicro-Friction Stir Lap Welding of Aluminum and Copper: A Short Review
This review article examines the recent progress in Micro-Friction Stir Lap Welding (ÎĽFSLW) of Al-Cu thin sheets, comparing the differences in tool geometry and processing parameters of macro-scale and micro-scale Friction Stir Lap Welding (FSLW) of Al-Cu plates. The effect of microstructural evolution, intermetallic formation, hardness distribution, mechanical joint strength, and electrical conductivity is discussed in detail. The most common defects in ÎĽFSLW, such as voids, tunnel defects, and hook formations, along with their impact on heat input and tool movement, are examined. Additionally, strategies to improve joint quality, including the addition of engineering interlayers (e.g. zinc foil) and nanoparticles (e.g. graphene), are explored as they mitigate brittle IMCs, improve grain structure, and enhance both mechanical and electrical properties. Important research gaps, regarding the effects of tool tilt angles and complex tool profiles on the mechanical and electrical joint properties, are highlighted as the potential benefits of assistive technologies, such as ultrasonic vibration, assistive heating and cooling, and assistive magnetic field. Future work is essential to enhance the ÎĽFSLW of Al-Cu, investigating complex tool geometries, and improving process parameters.
- Open Access
- 17 February 2025
- Published by MDPI AG in Inventions
- Vol. 10  (1) , 20
Development and Usability Evaluation of Inventive and Repurposable Children’s Furniture
This study developed inventive and repurposable children’s furniture to improve functionality and extend product lifespan. Unlike typical cribs which serve a single purpose, the proposed design supports multiple functions: crib, cushioned chair, highchair, walker, toilet attachment, pull-up bar, and bed safety rail. Specific dimensions were established, and the correct material selections were made for the selected concept. This was finalised using Autodesk Inventor 2019 that was used for stress analysis, and material optimisation. Usability tests were conducted to compare the proposed invention with single-function products. These tests were discussed in terms of task completion time, space-saving ability, survey feedback, and a REBA of musculoskeletal risk. It was found that the proposed design could be repurposed in a shorter time and save more space. A majority of the survey participants agreed that it performed well in terms of repurposability, design, space-saving ability, usability, comfort, sustainability, and safety. Additionally, the proposed design is cheaper compared to single-function products. Thus, creating inventive and repurposable children’s furniture can contribute to reducing waste and extending the lifespan of children’s furniture through innovative, cost-effective design solutions.
- 17 February 2025
- Published by MDPI AG in Inventions
- Vol. 10  (1) , 20
Open AccessDevelopment and Usability Evaluation of Inventive and Repurposable Children’s Furniture
This study developed inventive and repurposable children’s furniture to improve functionality and extend product lifespan. Unlike typical cribs which serve a single purpose, the proposed design supports multiple functions: crib, cushioned chair, highchair, walker, toilet attachment, pull-up bar, and bed safety rail. Specific dimensions were established, and the correct material selections were made for the selected concept. This was finalised using Autodesk Inventor 2019 that was used for stress analysis, and material optimisation. Usability tests were conducted to compare the proposed invention with single-function products. These tests were discussed in terms of task completion time, space-saving ability, survey feedback, and a REBA of musculoskeletal risk. It was found that the proposed design could be repurposed in a shorter time and save more space. A majority of the survey participants agreed that it performed well in terms of repurposability, design, space-saving ability, usability, comfort, sustainability, and safety. Additionally, the proposed design is cheaper compared to single-function products. Thus, creating inventive and repurposable children’s furniture can contribute to reducing waste and extending the lifespan of children’s furniture through innovative, cost-effective design solutions.
- Open Access
- 22 March 2024
- Published by Akademia Baru Publishing in Journal of Advanced Research in Micro and Nano Engineering
- Vol. 16  (1) , 1-18
Enhancing Lubrication Efficiency and Wear Resistance in Mechanical Systems through the Application of Nanofluids: A Comprehensive Review
Due to its potential to increase lubrication effectiveness and reduce wear, nanofluids have drawn substantial interest in the field of mechanical systems. Colloidal suspensions of nanoparticles dispersed across a base fluid to create nanofluids. This comprehensive study's goal is to examine recent developments, scientific discoveries, and possible applications of nanofluids in tribology. The scientific and technical characteristics of materials which move in relation to one another are the subject of the academic topic of tribology. The aim of this review paper includes a thorough investigation of phenomena like lubrication mechanism, wear and friction. Because of their unique features at the nanoscale, nanoparticles offer a special opportunity to mitigate enduring problems in tribological systems. This review critically evaluates the process utilized to create nanofluids, examines their tribological properties, and considers how they affect the effectiveness of how mechanical systems function. The higher lubrication effectiveness and wear resistance are the main points of attention. This study also investigates several methods for characterizing nanofluids to examine their behavior. The assessment also emphasizes important elements that affect the effectiveness of nanofluids, including the composition, concentration, size, and choice of nanoparticles, in addition to the choice of the base fluid. This study examines many problems and probable future endeavors within the industry, encompassing inquiries pertaining to long-term durability, and scalability. The primary objective of this review paper is to conduct a comprehensive analysis of the current state of nanofluid research within the domain of tribology. The objective is to foster further progress and encourage the extensive adoption of nanofluids as an innovative lubricating technology.
- 22 March 2024
- Published by Akademia Baru Publishing in Journal of Advanced Research in Micro and Nano Engineering
- Vol. 16  (1) , 1-18
Open AccessEnhancing Lubrication Efficiency and Wear Resistance in Mechanical Systems through the Application of Nanofluids: A Comprehensive Review
Due to its potential to increase lubrication effectiveness and reduce wear, nanofluids have drawn substantial interest in the field of mechanical systems. Colloidal suspensions of nanoparticles dispersed across a base fluid to create nanofluids. This comprehensive study's goal is to examine recent developments, scientific discoveries, and possible applications of nanofluids in tribology. The scientific and technical characteristics of materials which move in relation to one another are the subject of the academic topic of tribology. The aim of this review paper includes a thorough investigation of phenomena like lubrication mechanism, wear and friction. Because of their unique features at the nanoscale, nanoparticles offer a special opportunity to mitigate enduring problems in tribological systems. This review critically evaluates the process utilized to create nanofluids, examines their tribological properties, and considers how they affect the effectiveness of how mechanical systems function. The higher lubrication effectiveness and wear resistance are the main points of attention. This study also investigates several methods for characterizing nanofluids to examine their behavior. The assessment also emphasizes important elements that affect the effectiveness of nanofluids, including the composition, concentration, size, and choice of nanoparticles, in addition to the choice of the base fluid. This study examines many problems and probable future endeavors within the industry, encompassing inquiries pertaining to long-term durability, and scalability. The primary objective of this review paper is to conduct a comprehensive analysis of the current state of nanofluid research within the domain of tribology. The objective is to foster further progress and encourage the extensive adoption of nanofluids as an innovative lubricating technology.