Muhammad Faisal Waqar

This study investigates the impact of mineralogical and petrographic characteristics on the mechanical behavior of granitic and mafic rocks from the Shuangjiangkou (Sichuan Province) and Damiao complexes (Hebei Province) in China. The research methodology combined petrographic investigation, comprising optical microscopy and Scanning Electron Microscopy–Energy-Dispersive X-ray Spectroscopy (SEM-EDS) methods, with methodical geotechnical characterization to establish quantitative relationships between mineralogical composition and engineering properties. The petrographic studies revealed three lithologic groups: fine-to-medium-grained Shuangjiangkou granite (45%–60% feldspar, 27%–35% quartz, 10%–15% mica), plagioclase-rich anorthosite (more than 90% of plagioclase), and intermediate mangerite (40%–50% of plagioclase, 25%–35% of perthite). The uniaxial compressive strength tests showed great variations: granite (127.53 ± 15.07 MPa), anorthosite (167.81 ± 23.45 MPa), and mangerite (205.12 ± 23.87 MPa). Physical properties demonstrated inverse correlations between mechanical strength and both water absorption (granite: 0.25%–0.42%; anorthosite: 0.07%–0.44%; mangerite: 0.10%–0.25%) and apparent porosity (granite: 0.75%–0.92%; anorthosite: 0.20%–1.20%; mangerite: 0.29%–0.69%), with positive correlations to specific gravity (granite: 1.88–3.03; anorthosite: 2.67–2.90; mangerite: 2.43–2.99). Critical petrographic features controlling mechanical behavior include the following: (1) mica content in granite creating anisotropic properties, (2) extensive feldspar alteration through sericitization increasing microporosity and reducing intergranular cohesion, (3) plagioclase micro-fracturing and alteration to clinozoisite–sericite assemblages in anorthosite creating weakness networks, and (4) mangerite’s superior composition of >95% hard minerals with minimal sheet mineral content and limited alteration. Failure mode analysis indicated distinct patterns: granite experiencing shear-dominated failure (30–45° diagonal planes), anorthosite demonstrated tensile fracturing with vertical splitting, and mangerite showed catastrophic brittle failure with extensive fracture networks. These findings provide quantitative frameworks that relate petrographic features to engineering behavior, offering valuable insights for rock mass assessment and engineering design in similar crystalline rock terrains.

In response to the challenges of long crossing distances and difficult site selection for linear engineering projects in mountainous areas, this article proposes a multi-scale engineering geological zoning (EGZ) method. This method is based on the linear engineering construction stage and transitions from regional EGZ to EGZ of key sections (areas with poor or worst engineering geological conditions). This method not only ensures the effect of EGZ but also reduces the workload. When carrying out the EGZ of key sections, the assessment ideas of geological disaster hazards were taken into consideration. An improved method for calculating the time probability and magnitude probability of disaster occurrence is proposed. Taking the National Highway 318 Chengdu-Shigatse section as an example, EGZ was carried out. Its results revealed that the Nyingchi section was the key section with poor and worst engineering geological conditions. EGZ of the key section showed that the areas with poor and worst engineering geological conditions were mainly distributed in the curved sections on the northern side of the linear project. The proposed method in this article provides guidance for EGZ for linear engineering projects in mountainous areas.

Brittle failure, also known as rockburst, is a violent phenomenon that occurs during the excavation of hard rock in areas with high geostress, particularly at great depths. The induced hazards have been a global concern since the first half of the 20th century, leading to extensive efforts to understand the mechanisms and develop effective approaches to predict and control such rock mass failures. To understand the current state of research and future prospects of rockburst, a comprehensive review of past developments has been conducted. Firstly, we briefly summarize different definitions and types of rockburst. Next, we delve into the various technologies and methods employed in rockburst research and analyze the current knowledge on the mechanisms, classifications, and prediction of rockbursts. Then, we examine the existing methods for preventing and controlling these events. Despite the advancements made, the relationship between the behavior of rock masses at different scales, both in the laboratory and real-world conditions, remains an area of challenge. Additionally, the absence of rock mass classifications under high in-situ stress and lack of accuracy in rockburst prediction methods remain persistent issues that need to be addressed. This study delves into cutting-edge rockburst research, illuminating potential ground support strategies and empowering the mining industry in order to unleash innovative solutions for controlling these explosive phenomena.