Wenran Cao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Wenran Cao has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Alexander Scheuermann
School of Civil Engineering, The University of Queensland, Brisbane, Australia
5 shared publications - Harald Hofmann
School of the Environment, University of Queensland, Brisbane, QLD 4072, Australia
5 shared publications - Guanxi Yan
School of Civil Engineering, University of Queensland, Brisbane, Qld 4072, Australia
4 shared publications Harald Hofmann
3 shared publicationsAlexander Scheuermann
2 shared publications- Nike Hu
School of Civil Engineering, University of Queensland, St. Lucia, Queensland, Australia
2 shared publications
Latest Publications
- Open Access
- 4 October 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (10) , 1909
Iron Curtain Formation in Coastal Aquifers: Insights from Darcy-Scale Experiments and Reactive Transport Modelling
Although many studies have examined reaction zones in groundwater–seawater mixing areas, little attention has been given to how subsurface processes drive changes in iron (Fe) precipitation over time and space. This gap has limited our understanding of the “iron curtain” phenomenon in coastal aquifers. To address this, this study developed a reactive transport model to investigate how porosity evolves during the oxidative precipitation of Fe(II) in porous media. The model incorporates the dynamic effects of tortuosity, diffusivity, and surface area as minerals accumulate. Validation experiments, conducted with syringe tests that simulated Fe precipitation during freshwater–saltwater mixing, showed that precipitates formed mainly near the inlets, reflecting the development of a geochemical barrier at the groundwater–seawater interface. Scanning electron microscopy confirmed that Fe precipitates coated the surfaces of spherical particles. Numerical simulations further revealed that high Fe(II) concentrations drove pore clogging near the inlet, creating a dense precipitation zone akin to the iron curtain in coastal aquifers. At 10 mmol/L Fe(II), local clogging was observed, while at 100 mmol/L Fe(II), outflow rates (i.e., discharge) were substantially reduced. Together, the experiments and simulations highlight how hydrogeochemical processes influence hydraulic properties during the oxidative precipitation of Fe(II) in mixing zones.
- 4 October 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (10) , 1909
Open AccessIron Curtain Formation in Coastal Aquifers: Insights from Darcy-Scale Experiments and Reactive Transport Modelling
Although many studies have examined reaction zones in groundwater–seawater mixing areas, little attention has been given to how subsurface processes drive changes in iron (Fe) precipitation over time and space. This gap has limited our understanding of the “iron curtain” phenomenon in coastal aquifers. To address this, this study developed a reactive transport model to investigate how porosity evolves during the oxidative precipitation of Fe(II) in porous media. The model incorporates the dynamic effects of tortuosity, diffusivity, and surface area as minerals accumulate. Validation experiments, conducted with syringe tests that simulated Fe precipitation during freshwater–saltwater mixing, showed that precipitates formed mainly near the inlets, reflecting the development of a geochemical barrier at the groundwater–seawater interface. Scanning electron microscopy confirmed that Fe precipitates coated the surfaces of spherical particles. Numerical simulations further revealed that high Fe(II) concentrations drove pore clogging near the inlet, creating a dense precipitation zone akin to the iron curtain in coastal aquifers. At 10 mmol/L Fe(II), local clogging was observed, while at 100 mmol/L Fe(II), outflow rates (i.e., discharge) were substantially reduced. Together, the experiments and simulations highlight how hydrogeochemical processes influence hydraulic properties during the oxidative precipitation of Fe(II) in mixing zones.
- 18 June 2025
- Published by University of Queensland Library
Reactive transport and oxidative precipitation of Fe(II) in porous media
The University of Queensland's institutional repository, UQ eSpace, aims to create global visibility and accessibility of UQ’s scholarly research.
- 18 June 2025
- Published by University of Queensland Library
Reactive transport and oxidative precipitation of Fe(II) in porous media
The University of Queensland's institutional repository, UQ eSpace, aims to create global visibility and accessibility of UQ’s scholarly research.
- 1 March 2025
- Published by Emerald Publishing in Géotechnique Letters
- Vol. 15 (1) , 25-31
Flow path tortuosity in saturated porous media comprising idealised spherical particles
Extensive research has been conducted on tortuosity–porosity relationships for porous media. However, the relationship remains unclear, particularly when the porosity falls within the range 0·2–0·5, which covers most granular geomaterials. This study proposes a novel tortuosity–porosity model for estimating tortuosity in saturated porous media. Syringe tests were conducted by simulating seepage flow through a porous medium under Darcy’s law. The tortuosity was achieved after determining the porosity and permeability using the volumetric saturation method and constant-head method, respectively. Compared with existing models, the proposed model exhibited consistency at porosity values above 0·5 and improved smoothness as the porosity approached 0·2, which outperformed them in accurately predicting the tortuosities in these experiments. In addition, a sensitivity analysis against porosity demonstrated its precision, thereby facilitating its engineering application. These experimental results and model predictions provide valuable insights into the influence of pore geometry on flow paths and corresponding tortuosities.
- 1 March 2025
- Published by Emerald Publishing in Géotechnique Letters
- Vol. 15 (1) , 25-31
Flow path tortuosity in saturated porous media comprising idealised spherical particles
Extensive research has been conducted on tortuosity–porosity relationships for porous media. However, the relationship remains unclear, particularly when the porosity falls within the range 0·2–0·5, which covers most granular geomaterials. This study proposes a novel tortuosity–porosity model for estimating tortuosity in saturated porous media. Syringe tests were conducted by simulating seepage flow through a porous medium under Darcy’s law. The tortuosity was achieved after determining the porosity and permeability using the volumetric saturation method and constant-head method, respectively. Compared with existing models, the proposed model exhibited consistency at porosity values above 0·5 and improved smoothness as the porosity approached 0·2, which outperformed them in accurately predicting the tortuosities in these experiments. In addition, a sensitivity analysis against porosity demonstrated its precision, thereby facilitating its engineering application. These experimental results and model predictions provide valuable insights into the influence of pore geometry on flow paths and corresponding tortuosities.
- Open Access
Discernible Orientation for Tortuosity During Oxidative Precipitation of Fe(II) in Porous Media: Laboratory Experiment and Micro-CT Imaging
In the mixing zone, where submarine groundwater carrying ferrous iron [Fe(II)] meets seawater with dissolved oxygen (DO), the oxidative precipitation of Fe(II) occurs at the pore scale (nm~μm), and the resulting Fe precipitation significantly influences the seepage properties at the Darcy scale (cm~m). Previous studies have presented a challenge in upscaling fluid dynamics from a small scale to a large scale, thereby constraining our understanding of the spatiotemporal variations in flow paths as porous media evolve. To address this limitation, this study simulated subsurface mixing by injecting Fe(II)-rich freshwater into a DO-rich saltwater flow within a custom-designed syringe packed with glass beads. Micro-computed tomography imaging at the representative elementary volume scale was utilized to track the development of Fe precipitates over time and space. Experimental observations revealed three distinct stages of Fe hydroxides and their effects on the flow dynamics. Initially, hydrous Fe precipitates were characterized by a low density and exhibited mobility, allowing temporarily clogged pathways to intermittently reopen. As precipitation progressed, the Fe precipitates accumulated, forming interparticle bonding structures that redirected the flow to bypass clogged pores and facilitated precipitate flushing near the syringe wall. In the final stage, a notable reduction in the macroscopic capillary number from 3.0 to 0.05 indicated a transition from a viscous- to capillary-dominated flow, which led to the construction of ramified, tortuous flow channels. This study highlights the critical role of high-resolution imaging techniques in bridging the gap between pore-scale and continuum-scale analyses of multiphase flows in hydrogeochemical processes, offering valuable insights into the complex groundwater–seawater mixing.
Open AccessDiscernible Orientation for Tortuosity During Oxidative Precipitation of Fe(II) in Porous Media: Laboratory Experiment and Micro-CT Imaging
In the mixing zone, where submarine groundwater carrying ferrous iron [Fe(II)] meets seawater with dissolved oxygen (DO), the oxidative precipitation of Fe(II) occurs at the pore scale (nm~μm), and the resulting Fe precipitation significantly influences the seepage properties at the Darcy scale (cm~m). Previous studies have presented a challenge in upscaling fluid dynamics from a small scale to a large scale, thereby constraining our understanding of the spatiotemporal variations in flow paths as porous media evolve. To address this limitation, this study simulated subsurface mixing by injecting Fe(II)-rich freshwater into a DO-rich saltwater flow within a custom-designed syringe packed with glass beads. Micro-computed tomography imaging at the representative elementary volume scale was utilized to track the development of Fe precipitates over time and space. Experimental observations revealed three distinct stages of Fe hydroxides and their effects on the flow dynamics. Initially, hydrous Fe precipitates were characterized by a low density and exhibited mobility, allowing temporarily clogged pathways to intermittently reopen. As precipitation progressed, the Fe precipitates accumulated, forming interparticle bonding structures that redirected the flow to bypass clogged pores and facilitated precipitate flushing near the syringe wall. In the final stage, a notable reduction in the macroscopic capillary number from 3.0 to 0.05 indicated a transition from a viscous- to capillary-dominated flow, which led to the construction of ramified, tortuous flow channels. This study highlights the critical role of high-resolution imaging techniques in bridging the gap between pore-scale and continuum-scale analyses of multiphase flows in hydrogeochemical processes, offering valuable insights into the complex groundwater–seawater mixing.
- Open Access
- 6 January 2025
- Published by MDPI AG in Geotechnics
- Vol. 5 (1) , 2
A Novel Permeability–Tortuosity–Porosity Model for Evolving Pore Space and Mineral-Induced Clogging in Porous Medium
Hydrogeochemical processes contribute to long-term alterations in key physical properties of a porous medium, including porosity, tortuosity, and permeability, making it essential to understand their evolution and address clogging-dominated problems in hydrogeological systems such as acid rock drainage treatment and aquifer storage and recovery. However, accurately simulating extreme cases of evolving pore space presents challenges due to the inherent heterogeneity and nonlinear reactions in a porous medium. In response, this study introduces a comprehensive model that integrates the effects of tortuosity on permeability and surface area on reactivity during oxidative precipitation of Fe(II) in a porous medium. Benchmark simulations include an innovative permeability–tortuosity–porosity model accounting for Fe precipitation, as well as the occurrence of complete clogging from localized precipitation, which leads to a reduction of permeability and outflow. The outcomes demonstrate complete pore clogging when Fe(II) concentration reaches 10 mmol/L and a significant decrease in outflow at a Fe(II) concentration of 100 mmol/L. The model’s predictions provide detailed insights into the evolution of the pore matrix during hydrogeochemical reactions and support the development of regional engineering-scale models for applications in mining, agriculture, and environmental management.
- 6 January 2025
- Published by MDPI AG in Geotechnics
- Vol. 5 (1) , 2
Open AccessA Novel Permeability–Tortuosity–Porosity Model for Evolving Pore Space and Mineral-Induced Clogging in Porous Medium
Hydrogeochemical processes contribute to long-term alterations in key physical properties of a porous medium, including porosity, tortuosity, and permeability, making it essential to understand their evolution and address clogging-dominated problems in hydrogeological systems such as acid rock drainage treatment and aquifer storage and recovery. However, accurately simulating extreme cases of evolving pore space presents challenges due to the inherent heterogeneity and nonlinear reactions in a porous medium. In response, this study introduces a comprehensive model that integrates the effects of tortuosity on permeability and surface area on reactivity during oxidative precipitation of Fe(II) in a porous medium. Benchmark simulations include an innovative permeability–tortuosity–porosity model accounting for Fe precipitation, as well as the occurrence of complete clogging from localized precipitation, which leads to a reduction of permeability and outflow. The outcomes demonstrate complete pore clogging when Fe(II) concentration reaches 10 mmol/L and a significant decrease in outflow at a Fe(II) concentration of 100 mmol/L. The model’s predictions provide detailed insights into the evolution of the pore matrix during hydrogeochemical reactions and support the development of regional engineering-scale models for applications in mining, agriculture, and environmental management.
- Open Access
- 13 May 2024
- Published by Elsevier in Journal of Hydrology
- p. 131346
Permeability–porosity model considering oxidative precipitation of Fe(II) in granular porous media
- 13 May 2024
- Published by Elsevier in Journal of Hydrology
- p. 131346
Open AccessPermeability–porosity model considering oxidative precipitation of Fe(II) in granular porous media
- Open Access
- 22 April 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (4) , 690
State of the Art on Fe Precipitation in Porous Media: Hydrogeochemical Processes and Evolving Parameters
The mixing of terrestrial groundwater and seawater creates dynamic reaction zones in intertidal areas, where land-derived Fe(II) is oxidized to Fe(III) and then precipitates as Fe hydroxides at the groundwater–seawater interface. These hydrogeochemical processes contribute to the formation of iron bands at the saltwater wedge (SW) and beneath the upper saline plume (USP). This study provides a comprehensive review of physical and geochemical processes at field scale in coastal areas, explores the impact of mineral precipitation on pore structure at pore scale, and synthesizes reactive transport modeling (RTM) approaches for illustrating continuum-scale soil physio-chemical parameters during the evolution of porous media. Upon this review, knowledge gaps and research needs are identified. Additionally, challenges and opportunities are presented. Therefore, we reach the conclusion that the incorporation of observational data into a comprehensive physico-mathematical model becomes imperative for capturing the pore-scale processes in porous media and their influence on groundwater flow and solute transport at large scales. Additionally, a synergistic approach, integrating pore-scale modeling and non-invasive imaging, is equally essential for providing detailed insights into intricate fluid–pore–solid interactions for future studies, as well as facilitating the development of regional engineering-scale models and physio-chemical coupled models with diverse applications in marine science and engineering.
- 22 April 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (4) , 690
Open AccessState of the Art on Fe Precipitation in Porous Media: Hydrogeochemical Processes and Evolving Parameters
The mixing of terrestrial groundwater and seawater creates dynamic reaction zones in intertidal areas, where land-derived Fe(II) is oxidized to Fe(III) and then precipitates as Fe hydroxides at the groundwater–seawater interface. These hydrogeochemical processes contribute to the formation of iron bands at the saltwater wedge (SW) and beneath the upper saline plume (USP). This study provides a comprehensive review of physical and geochemical processes at field scale in coastal areas, explores the impact of mineral precipitation on pore structure at pore scale, and synthesizes reactive transport modeling (RTM) approaches for illustrating continuum-scale soil physio-chemical parameters during the evolution of porous media. Upon this review, knowledge gaps and research needs are identified. Additionally, challenges and opportunities are presented. Therefore, we reach the conclusion that the incorporation of observational data into a comprehensive physico-mathematical model becomes imperative for capturing the pore-scale processes in porous media and their influence on groundwater flow and solute transport at large scales. Additionally, a synergistic approach, integrating pore-scale modeling and non-invasive imaging, is equally essential for providing detailed insights into intricate fluid–pore–solid interactions for future studies, as well as facilitating the development of regional engineering-scale models and physio-chemical coupled models with diverse applications in marine science and engineering.
- Open Access
- 11 April 2024
- Published by Frontiers Media SA in Frontiers in Marine Science
- Vol. 11, 1385517
Porewater exchange and iron transformation in a coastal groundwater system: a field investigation, driving mechanisms analysis, and conceptual model
The high concentration of dissolved iron (Fe) in coastal waters triggers Lyngbya blooms in the Moreton Bay region of Southeast Queensland, Australia. Previous studies have provided a restricted understanding of how land-derived Fe is transported and then transformed into other forms (e.g., Fe oxides) before its release into the ocean. Here, a field investigation was conducted at a sandy beach on the northern end of Deception Bay, Queensland, Australia, focusing on porewater exchange and Fe transformation. This study revealed that tides provided a significant mechanism for driving the groundwater-seawater mixing in the intertidal area. Such forcing formed an upper saline plume (USP) with high dissolved oxygen (DO), creating a dynamic reaction zone for Fe oxidation and precipitation beneath the USP. The spatial distribution of Fe oxides highlighted a substantial Fe content in the subsurface, providing concrete evidence for the transformation of Fe from an aqueous state to a solid form. It also exhibited a low-permeable area that served as a geochemical barrier, absorbing chemical components like phosphate. These findings can assist in constructing a more accurate transport model that couples physical and geochemical processes to quantify the mechanisms driving Fe transformation in coastal areas and further deepen our comprehension of the hydrogeochemical functionalities in land-ocean connectivity via groundwater.
- 11 April 2024
- Published by Frontiers Media SA in Frontiers in Marine Science
- Vol. 11, 1385517
Open AccessPorewater exchange and iron transformation in a coastal groundwater system: a field investigation, driving mechanisms analysis, and conceptual model
The high concentration of dissolved iron (Fe) in coastal waters triggers Lyngbya blooms in the Moreton Bay region of Southeast Queensland, Australia. Previous studies have provided a restricted understanding of how land-derived Fe is transported and then transformed into other forms (e.g., Fe oxides) before its release into the ocean. Here, a field investigation was conducted at a sandy beach on the northern end of Deception Bay, Queensland, Australia, focusing on porewater exchange and Fe transformation. This study revealed that tides provided a significant mechanism for driving the groundwater-seawater mixing in the intertidal area. Such forcing formed an upper saline plume (USP) with high dissolved oxygen (DO), creating a dynamic reaction zone for Fe oxidation and precipitation beneath the USP. The spatial distribution of Fe oxides highlighted a substantial Fe content in the subsurface, providing concrete evidence for the transformation of Fe from an aqueous state to a solid form. It also exhibited a low-permeable area that served as a geochemical barrier, absorbing chemical components like phosphate. These findings can assist in constructing a more accurate transport model that couples physical and geochemical processes to quantify the mechanisms driving Fe transformation in coastal areas and further deepen our comprehension of the hydrogeochemical functionalities in land-ocean connectivity via groundwater.
- 14 March 2023
- Published by American Chemical Society (ACS) in ACS ES&T Water
- Vol. 3 (4) , 963-973
Oxidative Precipitation of Fe(II) in Porous Media: Laboratory Experiment and Numerical Simulation
- 14 March 2023
- Published by American Chemical Society (ACS) in ACS ES&T Water
- Vol. 3 (4) , 963-973
Oxidative Precipitation of Fe(II) in Porous Media: Laboratory Experiment and Numerical Simulation