ASA. Salmi

A. Salmi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


A. Salmi has a total of 486 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Dimensional isotope scaling of heat and particle transport between JET deuterium and tritium L-mode plasmas

    by T. Tala, A. Mariani, A.E. Järvinen, A. Salmi, F. Albert, I.S. Carvalho, A. Chomiczewska, E. Delabie, J. Ferreira, W. Gromelski, et al.

    The dimensionally matched deuterium–tritium pulse pair under JET L-mode conditions showed 13%–16% improvement in the energy confinement time in favour of the tritium pulse. This favourable isotope scaling can be seen clearly in the effective diffusion coefficients throughout the radius. The isotope scaling originates dominantly from the electron heat transport channel and from the edge part of the plasma. The phase and amplitude profiles in response to the gas puff modulation robustly show that there is no room for a large isotope scaling in the particle transport channel in the core plasma at ρ tor ⩽ 0.95 . This can also be seen in the derived particle transport coefficients between the deuterium and tritium pulses. EDGE2D-EIRENE simulations found that the radial ionisation profiles are very similar between the dimensionally matched deuterium and tritium identity pulses. A similar deviation from the gyro-Bohm scaling, i.e. strong isotope scaling favouring tritium in heat transport was found with gyrokinetic simulations in the edge at ρ tor = 0.95 under the JET L-mode conditions. The strong edge isotope scaling favouring tritium is consistent with the experimental observation. This edge isotope effect ρ tor = 0.95 in the GENE simulations is also much larger than found in the core plasma ρ tor = 0.6 when comparing similarly deuterium and tritium simulation results. Both the experimental results and the GENE simulations suggest that the isotope mass scaling is a nonlinear function of the isotope mass itself, being significantly stronger between deuterium and tritium than between hydrogen and deuterium, at least in JET L-mode conditions.


  • Open Access

    Overview of the MAST Upgrade physics programme: testing novel concepts at low aspect ratio to inform future devices

    by J.R. Harrison, A. Aboutaleb, M. Aljunid, S.Y. Allan, R. Allan, A. Alli, H. Anand, Y. Andrew, L.C. Appel, A. Ash, et al.

    The research programme performed on the Mega Amp Spherical Tokamak (MAST) Upgrade experiment has made significant advances in developing the physics understanding of low aspect ratio tokamaks in support of the operation of ITER and design of fusion powerplants. High performance plasma scenarios have been developed to facilitate a broad programme of experiments, in which confinement is constrained by the presence of m / n = 2/1 modes that cause substantial losses of fast ions. The onset of these modes coincides with the q = 2 surface residing in a local minimum in the toroidal current density profile. The maximum electron temperature at the pedestal top, T e,ped is limited with gas fuelling to ∼350 eV to maintain regular ELMs; higher T e,ped results in a transition to a non-stationary ELM-free regime. The operational space of spherical tokamaks has been expanded into small and ELM-free regimes. Strong shaping of the last closed flux surface can induce a transition from large to small ELMs, and ELM suppression with resonant magnetic perturbations has been observed for the first time in a low aspect ratio tokamak. Negative triangularity shaping has induced a transition from ELMy H-mode to a high-performance L-mode regime for the first time in a low aspect ratio tokamak. In studies of fast ion confinement, losses of fast particles due to Global Alfvén Eigenmodes have been identified. Interactions between fast ions generated by off-axis neutral beam injection and thermal neutrals can result in significant losses of fast ions. Experiments with on- and off-axis neutral beam injection exhibit a flux pumping mechanism, where the central safety factor is held to ∼1 in the absence of sawteeth. In studies of pedestal physics, it has been found that elevated main chamber neutral pressures result in an increase in the electron density and reduction in the temperature at the pedestal top. Advances in understanding plasma exhaust include the integration of a high-performance plasma core with detached outer divertors in the X -point target configuration. A newly commissioned lower divertor cryopump reduces the lower divertor neutral pressure by up to 50%, with minimal effect on the main chamber or upper divertor. New measurements and SOLPS-ITER simulations emphasise the importance of plasma–neutral interactions on divertor detachment in the conditions accessible in experiments. Real-time control of the ionisation front location in both divertor chambers independently has been demonstrated in double null experiments, enabled by the tightly baffled divertor chambers.


  • Open Access

    Hollow toroidal rotation profiles in strongly electron heated H-mode plasmas in the ASDEX Upgrade tokamak

    by Carl Friedrich Benedikt Zimmermann, Rachael M McDermott, Clemente Angioni, Basil P Duval, Ralph Dux, Emiliano Fable, Antti T Salmi, Tuomas J J Tala, Giovanni Tardini, Thomas Pütterich

    This work investigates toroidal momentum transport in type-I ELMy H-mode plasmas in the ASDEX Upgrade tokamak, focusing on the formation of hollow rotation profiles under strong electron cyclotron resonance heating (ECRH). Applying the established momentum transport analysis framework to a neutral beam injection (NBI) modulation experiment, momentum transport coefficients were inferred self-consistently. This was done for phases with dominant NBI heating and with additional strong ECRH, during which the rotation profile severely collapsed without significant changes in the externally applied torque. The experimental rotation profiles were accurately reproduced, confirming the robustness of the inferred diffusive, convective, and residual-stress contributions. While the Prandtl number and inward Coriolis pinch remained comparable between phases, the NBI+ECRH phase exhibited a strong counter-current intrinsic torque. Linear gyrokinetic simulations indicate a transition from ion-temperature-gradient (ITG) turbulence to an ITG–trapped-electron-mode (TEM) mixed regime under strong ECRH, consistent with the observed counter-current intrinsic torque and particle pinch behavior. Additional high-ECRH discharges with modified density demonstrated that hollow rotation profiles emerge from a balance between counter-current intrinsic torque and inward convective momentum transport, strongly influenced by the pedestal-top rotation level, which is dominantly set by variations in the pedestal-top density. These findings highlight the importance of intrinsic torque and inward convection for maintaining favorable rotation profiles in future low-torque tokamak scenarios and motivate further exploration of edge torque generation mechanisms.

  • Open Access

    Impurity study in the dimensionless and dimensional isotope identity experiment between JET Deuterium and Tritium L-mode plasmas

    by A. Chomiczewska, T. Tala, W. Gromelski, I. Ivanova-Stanik, E. Kowalska-Strzęciwilk, N. Wendler, I.S. Carvalho, P. Carvalho, I. Coffey, A. Kirjasuo, et al.

    The behaviour of impurities in fusion plasmas is of crucial importance for achieving sustained fusion reactions, and understanding similarities and differences between Deuterium (D) and Tritium (T) plasmas is needed to assess potential changes from DD to DT in ITER and future reactors. The first dimensionless and dimensional isotope identity experiments between Deuterium (D) and Tritium (T) L-mode plasmas were conducted at the JET W/Be wall. In the first approach, the discharges with matched ρ∗, ν∗, β n, q, and T e/T i were compared to emphasize direct isotope effects, while in the dimensional approach engineering parameters such as toroidal magnetic field B T, plasma current I p, plasma electron density and NBI power P NBI were matched. The dimensionless isotope scaling showed an improvement in global confinement and local transport in T plasmas in comparison to the matched D one (Cordey et al 1999 Nucl. Fusion 39 301). Detailed impurity analyses using VUV, visible spectroscopy, SXR cameras, and bolometry revealed that T plasmas exhibited higher radiation and impurity content, particularly Ni and W, compared to D plasmas. Understanding the origin of the increased impurity content is addressed in this paper. The dimensionless experiments showed differences in impurity transport. The Be source behaviour varied: D plasmas had higher Be influx in the dimensionless approach due to lower electron density and enhanced sputtering (Saibene et al 1999 Nucl. Fusion 39 1133), while T plasmas showed a higher Be source in the dimensional experiments, highlighting isotope mass effects. W in the divertor region was not sputtered by hydrogen isotopes. W in the divertor region was not sputtered by hydrogen isotopes. In the dimensionless experiments, W sputtering was primarily influenced by Ni in T plasmas and by Be in D plasmas. However, in the dimensional approach, Be played a more significant role in W sputtering within T plasmas. MHD instabilities, including ST oscillations, were present in all cases other ones were correlated with NBI power levels; higher NBI power led to elevated levels of Be, Ni, and W impurities. The comprehensive comparison underscores the necessity of accounting for isotope mass effects in predictive modelling and optimization of plasma performance in fusion reactors.


  • Open Access

    Detection of alpha heating in JET-ILW DT plasmas by a study of the electron temperature response to ICRH modulation

    by P. Mantica, F. Auriemma, I. Casiraghi, D. Gallart, K. Kirov, E. Lerche, A. Salmi, A. Dal Molin, E. Delabie, J. Eriksson, et al.

    In the JET DTE2 campaign a new method was successfully tested to detect the heating of bulk electrons by α-particles, using the dynamic response of the electron temperature T e to the modulation of ion cyclotron resonance heating (ICRH). A fundamental deuterium (D) ICRH scheme was applied to a tritium-rich hybrid plasma with D-neutral beam injection (NBI). The modulation of the ion temperature T i and of the ICRH accelerated deuterons leads to modulated α-heating with a large delay with respect to other modulated electron heating terms. A significant phase delay of ∼40° is measured between central T e and T i, which can only be explained by α-particle heating. Integrated modelling using different models for ICRH absorption and ICRH/NBI interaction reproduces the effect qualitatively. Best agreement with experiment is obtained with the European Transport Solver/Heating and Current Drive workflow.


  • Open Access

    Experimental validation of momentum transport theory in the core of H-mode plasmas in the ASDEX Upgrade tokamak

    by C. F. B. Zimmermann, C. Angioni, R. M. McDermott, B. P. Duval, R. Dux, E. Fable, A. Salmi, U. Stroth, T. Tala, G. Tardini, et al.

    This study employs the established momentum transport analysis at ASDEX Upgrade [Zimmermann et al., Nucl. Fusion 63, 124003 (2023)] to investigate the parametric variations of the momentum transport coefficients in the core of H-mode plasmas. These experimental results are compared to a comprehensive database of gyrokinetic calculations. Generally, good agreement between predicted and measured diffusive and convective transport coefficients is found. The predicted and measured Prandtl numbers correlate most dominantly with the magnetically trapped particle fraction. The experimentally inferred pinch numbers strongly depend on the logarithmic density gradient and magnetic shear, consistent with the theoretical predictions of the Coriolis pinch. The intrinsic torque from residual stress in the inner core is small, scales with the local logarithmic density gradient, and the data indicate a possible sign reversal. In the outer periphery of the core, the intrinsic torque is always co-current-directed and scales with the pressure gradient. This is consistent with prior experimental findings and global, non-linear gyrokinetic predictions. It suggests that profile shearing effects generate the intrinsic torque in the inner core. Toward the outer core, most likely, effects from E×B-shearing become more influential. These results offer the first comprehensive picture of this transport channel in the core plasma and contribute to validating the corresponding theoretical understanding. The derived scaling laws are used to construct a reduced momentum transport model, which has been validated against an additional dataset. This demonstrates that the model captures the essential contributions to momentum transport in the core of H-mode plasmas.


  • Open Access

    Improved accuracy and robustness of electron density profiles from JET’s X-mode frequency-modulated continuous-wave reflectometers

    by R. B. Morales, A. Salmi, P. Abreu, C. H. S. Amador, L. Appel, P. Carman, J. Fessey, J. Flanagan, M. Fontana, L. Frassinetti, et al.

    JET’s frequency-modulated continuous wave (FMCW) reflectometers have been operating well with the current design since 2005, and density profiles have been automatically calculated intershot since then. However, the calculated profiles had long suffered from several shortcomings: poor agreement with other diagnostics, sometimes inappropriately moving radially by several centimeters, elevated levels of radial jitter, and persistent wriggles (strong unphysical oscillations). In this research, several techniques are applied to the reflectometry data analysis, and the shortcomings are significantly improved. Starting with improving the equilibrium reconstruction that estimates the background magnetic field, adding a ripple correction in the reconstructed magnetic field profile, and adding new inner-wall reflection positions estimated through ray-tracing, these changes not only improve the agreement of reconstructed profiles to other diagnostics but also solve density profile wriggles that were present during band transitions. Other smaller but also persistent wriggles were also suppressed by applying a localized correction to the measured beat frequency where persistent oscillations are present. Finally, the burst analysis method, as introduced by Varela et al. [Nucl. Fusion 46 S693 (2006)], has been implemented to extract the beat frequency from stacked spectrograms. Due to the strong suppression of spurious reflections, the radial jitter that sometimes would span several centimeters has been strongly reduced. The stacking of spectrograms has also been shown to be very useful for stacking recurring events, like small gas puff modulations, and extracting transport coefficients that would otherwise be below the noise level.


  • Open Access

    Experimental determination of the three components of toroidal momentum transport in the core of a tokamak plasma

    by C.F.B. Zimmermann, R.M. McDermott, C. Angioni, B.P. Duval, R. Dux, E. Fable, T. Luda, A. Salmi, U. Stroth, T. Tala, et al.

    A new approach to infer the momentum transport in tokamak core plasmas via perturbation experiments is presented. For the first time, the analysis self-consistently includes all momentum transport components and their time dependencies, which are essential to separate the momentum fluxes and closely match the experiment. The quantitative agreement between the experimentally inferred transport coefficients and the gyrokinetic predictions provides an unprecedented validation. This work shows that the new methodology and gyrokinetic predictions can now be utilized on the route to physics-based prediction of momentum transport in future reactor plasmas.


  • Open Access

    Isotope mass scaling and transport comparison between JET Deuterium and Tritium L-mode plasmas

    by T. Tala, A.E. Järvinen, C.F. Maggi, P. Mantica, A. Mariani, A. Salmi, I.S. Carvalho, A. Chomiczewska, E. Delabie, F. Devasagayam, et al.

    The dimensionless isotope mass scaling experiment between pure Deuterium and pure Tritium plasmas with matched ρ ∗ , ν ∗ , β n , q and T e / T i has been achieved in JET L-mode with dominant electron heating (NBI+ohmic) conditions. 28% higher scaled energy confinement time B t τ E , t h / A is found in favour of the Tritium plasma. This can be cast in the form of the dimensionless energy confinement scaling law as Ω i τ E , t h ∼ A 0.48 ± 0.16 . This significant isotope mass scaling is consequently seen in the scaled one-fluid heat diffusion coefficient A χ e f f / B t which is around 50% lower in the Tritium plasma throughout the whole plasma radius. The isotope mass dependence in the particle transport channel is negligible, supported also by the perturbative particle transport analysis with gas puff modulation. The comparison of the edge particle fuelling or ionisation profiles from the EDGE2D-EIRENE simulations show that the absolute density differences that are necessary for the dimensionless match in the confined plasma dominate over any isotope mass dependencies of particle fuelling and ionization profiles at the plasma edge. Local GENE simulation results indicate a mild anti-gyroBohm effect at ρ t o r = 0.6 and thereby a small isotope mass dependence in favour of Tritium on heat transport and a negligible effect on particle transport. A significant fraction of the isotope scaling and reduced heat transport observed in the Tritium plasma is not captured in the GENE and ASTRA-TGLF-SAT2 simulations by simply changing the isotope mass for the same input profiles.


  • Open Access

    Comparison of momentum transport in matched hydrogen and deuterium H-mode plasmas in ASDEX Upgrade

    by C.F.B. Zimmermann, R.M. McDermott, C. Angioni, B.P. Duval, R. Dux, E. Fable, A. Salmi, U. Stroth, T. Tala, G. Tardini, et al.

    Advanced momentum transport analysis is used to study matched hydrogen (H) and deuterium (D) plasmas in the core of ASDEX Upgrade. The aim is to validate gyrokinetic theory and assess a possible isotope dependence. The methodology extracts momentum diffusion, convection, and intrinsic torque as a function of time from experiments employing neutral beam injection (NBI) modulation. H and D plasma scenarios with comparable ion heat fluxes, NBI torque, electron densities, and several dimensionless parameters were designed to highlight any mass dependency. Linear gyrokinetic simulations predict that, for similar background gradients, the Prandtl and pinch numbers should be similar for H and D. This was confirmed by the experimental momentum transport analyses. The assessed intrinsic torques were found to be similar between H and D, co-current directed and located near the outermost region of the plasma core. The strength of the intrinsic torque is correlated with the amplitude of the plasma pressure gradient in the pedestal. Finally, a robust error analysis demonstrates the uniqueness of the parameters obtained together with their uncertainties. Neglecting the intrinsic torque, or its time dependence, systematically distorts the assessed momentum diffusion and convection. This is the first method to separate all three transport mechanisms from experimental data by retaining their time dependencies, that is found to match, quantitatively, the gyrokinetic predictions for Prandtl and pinch numbers, within experimental uncertainties.