William Ferretto
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
William Ferretto has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Laura Savoldi
Politecnico di Torino
4 shared publications - Luca Molinaroli
Dipartimento di Energia, Politecnico di Milano, via Lambruschini 4, 20156 Milan, Italy
4 shared publications - Igor Matteo Carraretto
Department of Energy, Politecnico di Milano, Milan, Italy
3 shared publications - Luca Marocco
Department of Energy, Politecnico di Milano, Via Lambruschini 4, 20156 Milano, Italy
3 shared publications - Alessio Quamori Tanzi
Dipartimento Energia Galileo Ferraris MAHTEP Group, Politecnico di Torino, Turin, Torino, Italy
2 shared publications - Antonio Cammi
Politecnico di Milano
2 shared publications
Latest Publications
- Open Access
- 18 November 2026
- Published by Elsevier in Results in Engineering
Orientation-dependent hydraulic characterization of wall-confined Triply Periodic Minimal Surfaces (TPMS) lattices for CSP applications
- 18 November 2026
- Published by Elsevier in Results in Engineering
Open AccessOrientation-dependent hydraulic characterization of wall-confined Triply Periodic Minimal Surfaces (TPMS) lattices for CSP applications
- Open Access
- 19 September 2026
- Published by Elsevier in International Journal of Refrigeration
- Vol. 192
Multi-objective optimization of a portable air conditioner working with R290 using genetic algorithms
- 19 September 2026
- Published by Elsevier in International Journal of Refrigeration
- Vol. 192
Open AccessMulti-objective optimization of a portable air conditioner working with R290 using genetic algorithms
- Top Cited PapersOpen Access
Use of Triply Periodic Minimal Surface Lattices for Heat Transfer Applications: A Systematic Literature Investigation
The scientific interest in Triply Periodic Minimal Surface (TPMS) lattices for thermal applications has grown exponentially in recent years, largely driven by the advances in additive manufacturing. However, the lack of a transparent and reproducible selection methodology in previously published reviews hinders the clarity and comparability of findings. This paper adopts and customizes the APISSER framework, a structured and repeatable method that guides literature reviews through five steps: defining research questions, identifying sources, screening studies, extracting data, and reporting results. This approach is applied to investigate the use of TPMS lattices in heat-transfer applications, including heat sinks and heat exchangers. The study covers 170 peer-reviewed journal articles from 2000 to 2024, analyzing key aspects such as application domain, topology, working fluid, flow regime, additive manufacturing method, and numerical modeling details. Results show a predominance of numerical studies, with the Gyroid and Diamond topologies being the most investigated. These structures are frequently modeled as porous media, especially for estimating pressure drops, although detailed thermal analysis often relies on full-resolution geometries. Water and air are the most common working fluids, while turbulence modeling remains limited to RANS approaches. The structured methodology adopted ensures high reproducibility and provides a quantitative foundation for addressing the identified knowledge gaps, guiding future experimental and computational research.
Top Cited PapersOpen AccessUse of Triply Periodic Minimal Surface Lattices for Heat Transfer Applications: A Systematic Literature Investigation
The scientific interest in Triply Periodic Minimal Surface (TPMS) lattices for thermal applications has grown exponentially in recent years, largely driven by the advances in additive manufacturing. However, the lack of a transparent and reproducible selection methodology in previously published reviews hinders the clarity and comparability of findings. This paper adopts and customizes the APISSER framework, a structured and repeatable method that guides literature reviews through five steps: defining research questions, identifying sources, screening studies, extracting data, and reporting results. This approach is applied to investigate the use of TPMS lattices in heat-transfer applications, including heat sinks and heat exchangers. The study covers 170 peer-reviewed journal articles from 2000 to 2024, analyzing key aspects such as application domain, topology, working fluid, flow regime, additive manufacturing method, and numerical modeling details. Results show a predominance of numerical studies, with the Gyroid and Diamond topologies being the most investigated. These structures are frequently modeled as porous media, especially for estimating pressure drops, although detailed thermal analysis often relies on full-resolution geometries. Water and air are the most common working fluids, while turbulence modeling remains limited to RANS approaches. The structured methodology adopted ensures high reproducibility and provides a quantitative foundation for addressing the identified knowledge gaps, guiding future experimental and computational research.
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 54 (10) , 1-8
Design, Manufacturing, and Experimental Characterization of a First-of-a-Kind DTT ECH Mirror Equipped With TPMS
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 54 (10) , 1-8
Open AccessDesign, Manufacturing, and Experimental Characterization of a First-of-a-Kind DTT ECH Mirror Equipped With TPMS
- Open Access
- 4 December 2025
- Published by MDPI AG in Preprints.org
Use of Triply Periodic Minimal Surface Lattices for Heat Transfer Applications: A Systematic Literature Investigation
The scientific interest in Triply Periodic Minimal Surface (TPMS) lattices for thermal applications has grown exponentially in recent years, largely driven by the advances in additive manufacturing. However, the lack of a transparent and reproducible selection methodology in previously published reviews hinders the clarity and comparability of findings. This paper adopts and customizes the APISSER framework, a structured and repeatable method that guides literature reviews through five steps: defining research questions, identifying sources, screening studies, extracting data, and reporting results. This approach is applied to investigate the use of TPMS structures in heat transfer applications, including heat sinks and heat exchangers. The study covers peer-reviewed journal articles from 2000 to 2024, analyzing key aspects such as application domain, topology, working fluid, flow regime, additive manufacturing method, and numerical modeling details. Results show a predominant use of numerical studies, with Gyroid and Diamond topologies being the most investigated. These structures are frequently modeled as porous media, especially for estimating pressure drops, although detailed thermal analysis often relies on full-resolution geometries. Water and air are the most common working fluids, while turbulence modeling remains limited to RANS approaches. The structured methodology adopted ensures high reproducibility and offers a quantitative foundation for the identified knowledge gaps to guide future experimental and computational research.
- 4 December 2025
- Published by MDPI AG in Preprints.org
Open AccessUse of Triply Periodic Minimal Surface Lattices for Heat Transfer Applications: A Systematic Literature Investigation
The scientific interest in Triply Periodic Minimal Surface (TPMS) lattices for thermal applications has grown exponentially in recent years, largely driven by the advances in additive manufacturing. However, the lack of a transparent and reproducible selection methodology in previously published reviews hinders the clarity and comparability of findings. This paper adopts and customizes the APISSER framework, a structured and repeatable method that guides literature reviews through five steps: defining research questions, identifying sources, screening studies, extracting data, and reporting results. This approach is applied to investigate the use of TPMS structures in heat transfer applications, including heat sinks and heat exchangers. The study covers peer-reviewed journal articles from 2000 to 2024, analyzing key aspects such as application domain, topology, working fluid, flow regime, additive manufacturing method, and numerical modeling details. Results show a predominant use of numerical studies, with Gyroid and Diamond topologies being the most investigated. These structures are frequently modeled as porous media, especially for estimating pressure drops, although detailed thermal analysis often relies on full-resolution geometries. Water and air are the most common working fluids, while turbulence modeling remains limited to RANS approaches. The structured methodology adopted ensures high reproducibility and offers a quantitative foundation for the identified knowledge gaps to guide future experimental and computational research.
- Open Access
- 18 October 2025
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 75
Experimental analysis, model development and validation of a cold room designed for off-grid operation
- 18 October 2025
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 75
Open AccessExperimental analysis, model development and validation of a cold room designed for off-grid operation
- Open Access
- 25 September 2025
- Published by Elsevier in International Journal of Refrigeration
- Vol. 180, 535-547
Performance evaluation of R744-hydrocarbon blends in a two-stage refrigeration cycle for transport applications
- 25 September 2025
- Published by Elsevier in International Journal of Refrigeration
- Vol. 180, 535-547
Open AccessPerformance evaluation of R744-hydrocarbon blends in a two-stage refrigeration cycle for transport applications
- Open Access
Performance Assessment of R-454C, R-449A, and R-744 in Food Retail Refrigeration Systems
Reduced energy use and increased energy efficiency are essential for decarbonization and sustainable development. The food cold chain is a crucial infrastructure with high energy consumption and rising demand. A careful selection of technology used in food retail systems could result in long-term energy savings, functionality, ease of maintenance, and high energy efficiency. In this work, a comparison between the energy performance of three low-GWP refrigerants, namely, R-454C, R-449A, and R-744, is carried out with reference to an existing refrigerating system that serves a real supermarket. Energy usage and seasonal efficiency have been examined for three locations in Europe, representing mild and hot ambient temperatures. Results show that systems based on R-454C and R-449A perform significantly better than R-744 architectures, improving sCOP of up to +12% and +17%, respectively, with a simpler equipment design. This suggests that careful assessment is required to select the most appropriate refrigerant for each store size and climatic condition.
Open AccessPerformance Assessment of R-454C, R-449A, and R-744 in Food Retail Refrigeration Systems
Reduced energy use and increased energy efficiency are essential for decarbonization and sustainable development. The food cold chain is a crucial infrastructure with high energy consumption and rising demand. A careful selection of technology used in food retail systems could result in long-term energy savings, functionality, ease of maintenance, and high energy efficiency. In this work, a comparison between the energy performance of three low-GWP refrigerants, namely, R-454C, R-449A, and R-744, is carried out with reference to an existing refrigerating system that serves a real supermarket. Energy usage and seasonal efficiency have been examined for three locations in Europe, representing mild and hot ambient temperatures. Results show that systems based on R-454C and R-449A perform significantly better than R-744 architectures, improving sCOP of up to +12% and +17%, respectively, with a simpler equipment design. This suggests that careful assessment is required to select the most appropriate refrigerant for each store size and climatic condition.
- Open Access
Horizontal Stratified Air–Foam–Water Flows: Preliminary Modelling Attempts with OLGA
Water accumulation is a major problem in the flow assurance of gas pipelines. To limit liquid loading issues, deliquification by means of surfactant injection is a promising alternative to the consolidated mechanical methods. However, the macroscopic behavior of foam pipe flow in the presence of other phases has barely been explored. The goal of this work was to propose an approach to simulate air–water–foam flows in horizontal pipes using OLGA by Schlumberger, an industry standard tool for the transient simulation of multiphase flow. The simulation results were compared with experimental data for 60 mm and 30 mm ID (Inner Diameter) horizontal pipelines. Preliminary validation for two-phase air–water flow was carried out, which showed that correct flow pattern recognition is essential to accurately reproduce the experimental data. Then, stratified air–foam–water flows were investigated, assuming different models for the foam local velocity distribution. Foam rheology was considered through the Herschel–Bulkley model with the yield stress varying in time due to foam decay. The results showed good agreement for a uniform velocity profile and fresh foam properties in the case of the 60 mm ID pipeline, whereas for the 30 mm ID, which was characterized by significantly higher velocities, a linear velocity profile and 2000 s foam aging provided the best agreement. In both cases, the pressure gradient was overestimated, and the mean absolute prediction error ranged from about 5% to 30%.
Open AccessHorizontal Stratified Air–Foam–Water Flows: Preliminary Modelling Attempts with OLGA
Water accumulation is a major problem in the flow assurance of gas pipelines. To limit liquid loading issues, deliquification by means of surfactant injection is a promising alternative to the consolidated mechanical methods. However, the macroscopic behavior of foam pipe flow in the presence of other phases has barely been explored. The goal of this work was to propose an approach to simulate air–water–foam flows in horizontal pipes using OLGA by Schlumberger, an industry standard tool for the transient simulation of multiphase flow. The simulation results were compared with experimental data for 60 mm and 30 mm ID (Inner Diameter) horizontal pipelines. Preliminary validation for two-phase air–water flow was carried out, which showed that correct flow pattern recognition is essential to accurately reproduce the experimental data. Then, stratified air–foam–water flows were investigated, assuming different models for the foam local velocity distribution. Foam rheology was considered through the Herschel–Bulkley model with the yield stress varying in time due to foam decay. The results showed good agreement for a uniform velocity profile and fresh foam properties in the case of the 60 mm ID pipeline, whereas for the 30 mm ID, which was characterized by significantly higher velocities, a linear velocity profile and 2000 s foam aging provided the best agreement. In both cases, the pressure gradient was overestimated, and the mean absolute prediction error ranged from about 5% to 30%.