WTWojciech Turbański

Wojciech Turbański

*This is an algorithmically generated author record based on publicly available information.

Wojciech Turbański has a total of 5 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Economic Efficiency of Pine Wood Processing in Furniture Production

    by Marek Wieruszewski, Wojciech Turbański, Katarzyna Mydlarz, Maciej Sydor

    The wood industry faces challenges due to rising prices and limited wood availability, putting pressure on material efficiency in wood processing. This justifies the analysis of the relationship between efficiency and economy in pine wood processing. The study aimed to measure the impact of variations in the thickness of logs, changes in the technology of their further processing, and changes in prices of raw materials and products on the material efficiency in the context of large-scale production of furniture elements made of pinewood. The raw material input consisted of three categories of log sizes, from which the specialized purpose lumber was produced. The lumber was then processed into semi-finished furniture elements with three technologies: without detecting natural wood defects, with human detection, and with automatic detection. The study was conducted in Poland from 2020 to 2022. The material efficiencies in every stage of the analyzed wood processing and the cost efficiencies were calculated and analyzed based on the results obtained under real industrial conditions. The main findings are as follows: (1) when comparing the logs in the three tested diameter ranges (14–23 cm, 23–30 cm, and more than 30 cm), it can be observed that the overall material efficiency of sawing is in the range of 70%–85% and increases with the thickness of the log; (2) the share of 38 mm specialized sawn timber in the total amount of sawn timber was 41%–58% and increased with increasing log diameter; (3) the economic efficiency of the technological process is 170%–290%, based on the log size and the technology of further processing employed. The determining factor affecting cost efficiencies is unexpected changes in raw material prices and product demand in 2022. The findings suggest that while improvements in processing technology can boost efficiency, they cannot fully offset the rise in raw wood material prices.


  • Open Access

    Application of 3D Scanning Method to Assess Mounting Holes’ Shape Instability of Pinewood

    by Maciej Sydor, Jerzy Majka, Michał Rychlik, Wojciech Turbański

    Swelling and shrinkage anisotropy affect the susceptibility to an assembly of wooden elements by changing designed clearances or interference fits. This work described the new method to measure mounting holes’ moisture-induced shape instability and its verification using three sets of twin samples made of Scots pinewood. Each set of samples contained a pair with different grain patterns. All samples were conditioned under reference conditions (relative air humidity–RH = 60% and temperature 20 °C), and their moisture content (MC) reached equilibrium (10.7 ± 0.1%). On the side of each sample, the seven mounting holes of 12 mm in diameter were drilled. Immediately after drilling, Set 1 was used to measure the effective hole diameter with 15 cylindrical plug-gauges with diameters of 0.05 mm step, while Set 2 and Set 3 were separately re-seasoned by six months in two extreme conditions. Set 2 was conditioned with air at 85% RH (reached an equilibrium MC of 16.6 ± 0.5%), while Set 3 was exposed to air at 35% RH (reached an equilibrium MC of 7.6 ± 0.1%). Results of the plug gauge tests highlighted that holes in the samples subjected to swelling (Set 2) increased an effective diameter in the range of 12.2–12.3 mm (1.7–2.5%), while samples subjected to shrinking (Set 3) reduced the effective diameter to 11.9–11.95 mm (0.8–0.4%). To accurately reproduce the complex shape of the deformation, gypsum casts of holes were made. The 3D optical scanning method was used to read the gypsum casts’ shape and dimensions. The 3D surface map of deviations analysis provided more detailed information than the plug-gauge test results. Both the shrinking and swelling of the samples changed the shapes and sizes of the holes, but shrinking reduced the effective diameter of the hole more than swelling increased it. The moisture-induced changes in the shape of holes are complex: the holes ovalized with a different range, depending on the wood grain pattern and hole depth, and were slightly extended in diameter at the bottom. Our study provides a new way to measure 3D hole initial shape changes in wooden elements during desorption and absorption.