Xiaojing Yang
Xiaojing Yang has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Lufeng Yang
State Key Laboratory of Technology in Space Cryogenic Propellants, Beijing Special Engineering Design and Research Institute, Beijing 100028, China
2 shared publications - Gang Lei
State Key Laboratory of Technology in Space Cryogenic Propellants, Beijing 100028, China
1 shared publication - Jia Yan
School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, China
1 shared publication - Qiang Chen
State Key Laboratory of Technology in Space Cryogenic Propellants, Beijing 100028, China
1 shared publication - Qiang Chen
State Key Laboratory of Technologies in Space Cryogenic Propellants, Beijing 100028, China
1 shared publication - Qingguo Sun
State Key Laboratory of Technology in Space Cryogenic Propellants, Beijing Special Engineering Design and Research Institute, Beijing 100028, China
1 shared publication
Latest Publications
- Open Access
Development and Recent Progress of Hoses for Cryogenic Liquid Transportation
Recently, the application of cryogenic hoses in the field of cryogenic media has become a hot topic, especially in the industry of offshore liquefied natural gas and aerospace field. However, the structure of cryogenic hoses is complex, and reasonable structural properties are required due to the harsh working conditions. There is still plenty of scope for further development to improve the performance in all aspects. In this paper, the current development status of cryogenic hoses for liquefied natural gas (LNG) transportation is reviewed first, including the types, manufacturers, structural forms, performance, and key technical challenges. And then, the recent progress and prospect of cryogenic hoses for cryogenic liquid transportation (such as LNG and liquid oxygen) are summarized, including structure design, low-temperature resistant polymers, liquid oxygen compatible polymers, and leakage monitoring technologies. This paper provides a comprehensive overview of the research development and application of cryogenic hoses. Moreover, future research directions have been proposed to facilitate its practical applications in aerospace.
Open AccessDevelopment and Recent Progress of Hoses for Cryogenic Liquid Transportation
Recently, the application of cryogenic hoses in the field of cryogenic media has become a hot topic, especially in the industry of offshore liquefied natural gas and aerospace field. However, the structure of cryogenic hoses is complex, and reasonable structural properties are required due to the harsh working conditions. There is still plenty of scope for further development to improve the performance in all aspects. In this paper, the current development status of cryogenic hoses for liquefied natural gas (LNG) transportation is reviewed first, including the types, manufacturers, structural forms, performance, and key technical challenges. And then, the recent progress and prospect of cryogenic hoses for cryogenic liquid transportation (such as LNG and liquid oxygen) are summarized, including structure design, low-temperature resistant polymers, liquid oxygen compatible polymers, and leakage monitoring technologies. This paper provides a comprehensive overview of the research development and application of cryogenic hoses. Moreover, future research directions have been proposed to facilitate its practical applications in aerospace.
- Open Access
Analysis of Unsteady Heat Transfer in the Pre-Cooling Process of 300 m3 Liquid Hydrogen Tank
A mathematical model for the pre-cooling process was established to solve the problems of the long pre-cooling time and uncertain parameters of cryogenic propellant tanks. The pre-cooling parameters of a 300 m3 liquid hydrogen tank at several cooling rates were calculated and analyzed. The results show that the liquid hydrogen flow required to pre-cool the gas in the tank, tank wall, accessories, and interlayer thermal insulation materials increases first and then decreases and that the liquid hydrogen flow needed to offset the heat leakage gradually increases with the temperature reduction. When the average cooling rate rose from 0.1 K/min to 1 K/min, the pre-cooling time was shortened from 2730 min to 273 min, and the consumption of liquid hydrogen decreased from 2115 kg to 2091 kg. Among the various heat loads, the inner tank wall and accessories consumed the most significant proportion of liquid hydrogen, accounting for 87.84% to 88.61%. The cooling capacity was derived from the liquid hydrogen’s evaporation and the cryogenic hydrogen gas’s heating process, of which the liquid hydrogen accounted for 23.00%. Considering the principle of safe operation, it is recommended that stepped pre-cooling in two or three stages based on the maximum cooling rate is conducted.
Open AccessAnalysis of Unsteady Heat Transfer in the Pre-Cooling Process of 300 m3 Liquid Hydrogen Tank
A mathematical model for the pre-cooling process was established to solve the problems of the long pre-cooling time and uncertain parameters of cryogenic propellant tanks. The pre-cooling parameters of a 300 m3 liquid hydrogen tank at several cooling rates were calculated and analyzed. The results show that the liquid hydrogen flow required to pre-cool the gas in the tank, tank wall, accessories, and interlayer thermal insulation materials increases first and then decreases and that the liquid hydrogen flow needed to offset the heat leakage gradually increases with the temperature reduction. When the average cooling rate rose from 0.1 K/min to 1 K/min, the pre-cooling time was shortened from 2730 min to 273 min, and the consumption of liquid hydrogen decreased from 2115 kg to 2091 kg. Among the various heat loads, the inner tank wall and accessories consumed the most significant proportion of liquid hydrogen, accounting for 87.84% to 88.61%. The cooling capacity was derived from the liquid hydrogen’s evaporation and the cryogenic hydrogen gas’s heating process, of which the liquid hydrogen accounted for 23.00%. Considering the principle of safe operation, it is recommended that stepped pre-cooling in two or three stages based on the maximum cooling rate is conducted.