Xuelian Zhou

Xuelian Zhou

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xuelian Zhou has a total of 56 co-authors. Here are the top co-authors by number of shared publications:

  • Yunni Zhan

    National Key Laboratory for Development and Utilization of Forest Food Resources, Institute of Chemical Industry of Forest Products, Chinese Academy of Forestry, Nanjing 210042, China

    3 shared publications
  • Chen Huang

    Institute of Chemical Industry of Forest Products, Chinese Academy of Forestry, Jiangsu Province Key Laboratory of Biomass Energy and Materials, Nanjing 210042, China

    2 shared publications
  • Fangmin Liang

    State Key Laboratory for Development and Utilization of Forest Food Resources, Institute of Chemical Industry of Forest Products, Chinese Academy of Forestry

    2 shared publications
  • Guigan Fang

    Institute of Chemical Industry of Forest Products, Chinese Academy of Forestry, Nanjing, 210042, China

    2 shared publications
  • Beiping Zhu

    1 shared publication
  • Boris Nikolayevich Kuznetsov

    Институт химии и химической технологии СО РАН, ФИЦ «Красноярский научный центр СО РАН», Сибирский федеральный университет

    1 shared publication

Latest Publications

  • Open Access

    A multi-step sequential pretreatment for boosting biomass conversion

    by Weikang Teng, Hai Cheng, Yunni Zhan, Huiyang Bian, Fangmin Liang, Tongqi Yuan, Chen Huang, Guigan Fang, Hongbin Li, Xuelian Zhou

    This study aims to overcome the structural recalcitrance of lignocellulosic biomass and improve the economic viability of biorefineries. A multi-step sequential pretreatment strategy combining hydrothermal pretreatment, twin-screw extrusion, and deep eutectic solvent (DES) treatments was developed to effectively deconstruct poplar biomass while recovering high-quality lignin, xylooligosaccharides (XOS), and fermentable sugars.The results demonstrated that this integrated approach achieved exceptional pretreatment performance, with 89.7% delignification and 85.3% xylan removal. The strategy enabled near-complete cellulose enzymatic hydrolysis at a low enzyme loading (15 FPU/g) and achieved a 45.7% XOS yield. Furthermore, the process yielded high-purity lignin (99.9%) with an 81.5% recovery rate,characterized by reduced molecular weight, enhanced antioxidant activity (IC 50 = 56.16 mg/L), and a high phenolic hydroxyl content (2.81 mmol/g).This sequential pretreatment strategy exhibits significant potential for the integrated valorization of poplar biomass into fermentable monosaccharides, functional oligosaccharides, and antioxidant lignin derivatives, advancing the sustainability of lignocellulosic biorefineries.

  • Open Access

    Synergistic Enhancement of Phenolic Hydroxyl Content in Lignin via Sequential Hydrothermal and Twin-Screw Extrusion Pretreatment Followed by Aqueous Ethanol Organosolv Extraction

    by Fangmin Liang, Ting Jiao, Jian Jiao, Chen Huang, Yan Lv, Yongjun Deng, Qingwen Tian, Ting Wu, Beiping Zhu, Shanming Han, et al.

    Lignin, the second most abundant polymer, remains largely underutilized, with nearly 90% of industrial lignin being combusted for energy due to its low phenolic hydroxyl content and structural heterogeneity of conventional extraction methods. The present study proposes a synergistic extraction method integrating sequential hydrothermal and twin-screw extrusion pretreatment followed by aqueous ethanol organosolv extraction. Three pretreatment strategies—hydrothermal pretreatment, twin-screw extrusion pretreatment, and sequential hydrothermal and twin-screw extrusion pretreatment—were compared. The sequential pretreatment exhibited the most favorable performance. Upon organosolv extraction, a lignin extraction rate of 67.9% was achieved, representing a 20.8% increase over that of the raw material. Extensive β-O-4′ bond cleavage during the integrated process liberated phenolic hydroxyl groups. This elevated the total phenolic hydroxyl content to 3.43 mmol·g−1, representing a 63.3% increase relative to lignin derived from raw material. Concurrently, this bond cleavage yielded lignin with a narrower molecular weight distribution, indicating enhanced structural homogeneity. Additionally, cellulose retention after lignin extraction reached 88.9%. Mass-balance calculations indicated that 1000 g of raw material yielded 82.5 g of xylose and xylooligosaccharides, 148.2 g of highly active lignin, and cellulose-enriched solid residues, thereby facilitating the comprehensive utilization of the three primary components of lignocellulosic biomass.


  • Open Access

    Enhancing the Value Added of Lignin Extracted from Pinus massoniana Lamb. via DES Pretreatment

    by Hai Cheng, Tong-Qi Yuan, Jinyuan Cheng, Yunni Zhan, Xuelian Zhou, Guigan Fang, Yongjun Deng

    This study systematically investigated the pretreatment effects of diol-based DESs (deep eutectic solvents) on Pinus massoniana Lamb. (P. massoniana). A diol-based DES system (Choline chloride (ChCl): AlCl3: BDO) was developed to degrade and disassemble P. massoniana, thereby facilitating saccharification and achieving the utilization of high-value lignin. The DES-based pretreatment achieved a glucan recovery yield of 92.95% and a xylan yield of 71.73% at 130 °C. Meanwhile, the lignin removal yields reached 61.96% at 130 °C, and the lignin recovered from DES fractionation was also preserved well; moreover, the β-O-4′ linkage content was retained at approximately 51.63%. DES was also demonstrated to be promising for promoting cellulose saccharification, lignin fractionation and enzymatic hydrolysis. The preservation mechanism was speculated to involve the introduction of diol -OH groups at the Cα-position of the lignin β-O-4′ structure via etherification. In addition, FT-IR indicated that the main structure of cellulose in P. massoniana remained unchanged after pretreatment. The grafting of diol onto the Cα-position of the β-O-4′ linkages was confirmed by 2D-HSQC, which could inhibit lignin further condensation; 31P NMR revealed that the total phenolic -OH content increased significantly and was enhanced by pretreatment, which indicated that methoxy and ether bond groups were reduced.


  • Open Access

    Demethylation and Acetylation Modification of Alkali Lignin and Their Potential Applications in Sunscreen

    by Jianan Hu, Yunni Zhan, Xuelian Zhou

    In order to improve the utilization of alkali lignin (AL) as an effective component for ultraviolet (UV) shielding, demethylation and acetylation modification were carried out to improve the UV absorption performance of lignin. Then, lignin-based sunscreens were successfully prepared by mixing the modified lignin and commercial cream without UV shielding ingredients. The modified alkali lignin was comprehensively characterized in terms of its molecular weight, functional groups and structural properties by GPC, UV spectroscopy and 31P NMR. The results showed that the Mw of all three lignin feedstocks (AL, ALMeOH and ALAcetone) was decreased with prolonged demethylation time. Compared to the original feedstock, demethylated AL had a darker color and improved UV absorption performance due to the increased phenolic hydroxyl content (approximately 4.35 mmol/g). 31P-NMR spectra showed that the guaiacyl phenolic hydroxyl content decreased rapidly after acetylation, causing the sample color to become lighter. Among all lignin-based sunscreens, DALAcetone achieved the highest SPF value of 11.23, a 69.4% increase over its pre-reaction level and a 7.58-fold enhancement compared to the original lignin. In summary, this study opens a promising avenue for repurposing industrial lignin as a sustainable biomaterial in high-value sectors like UV-blocking agents and cosmetic formulations.


  • A novel type Ⅳ deep eutectic solvent for pretreating wheat straw to co-produce fermentable sugars and hydrophobic micro-nano lignin particle

    by Ting Wang, Chen Huang, Xuelian Zhou, Yunni Zhan, Jinyuan Cheng, Jing Ren, Shaojie Zhang, Yubin Fei, Qiang Yong


  • Open Access

    In-situ deposition of β-FeOOH nanoparticles on commercially available filter paper for fast and efficient removal of antibiotic

    by Chaojian Li, Yaqian Yu, Weiqi Wei, Sha Wang, Tingting Xu, Huining Xiao, Hongqi Dai, Xuelian Zhou, Huiyang Bian


  • Open Access

    Deep eutectic solvent (DES) pretreatment and lignin regeneration for the development of a bamboo leaf-based bioplastic

    by Chao Liu, Hongfei Liu, Huijie Wang, Zhaochuan Yu, Ming Yan, Xuelian Zhou, Renai Li

    The excessive utilization of petroleum-based plastic products has led to a pervasive environmental and human health threat. In response, the adoption of bioplastics derived from biomass has emerged as the foremost alternative to conventional plastics, owing to their inherent biodegradability and sustainability. The present study demonstrates the preparation of a biodegradable and cost-effective lignocellulosic bioplastic by utilizing dissolving bamboo leaf powder with deep eutectic solvents (DES) and regenerating lignin in situ. The DES was synthesized through a one-step heating and stirring method using choline chloride (ChCl) and anhydrous oxalic acid. The crystallinity of the bioplastics is enhanced by DES pretreatment, thereby improving the internal structural order of the material. Moreover, lignin regeneration reduces the pore size within the bioplastics and contributes to a more compact internal structure. The prepared lignocellulosic bioplastics exhibit remarkable mechanical strength, with a tensile strength of 113 MPa. Additionally, they demonstrate good water stability, as evidenced by a contact angle of 55.52°. Moreover, these bioplastics possess an exceptional biodegradability with a degradation rate exceeding 98% after 60 days. This study presents an innovative approach for the high-value utilization of bamboo leaf resources.


  • Open Access

    Low pH Stress Enhances Gluconic Acid Accumulation with Enzymatic Hydrolysate as Feedstock Using Gluconobacter oxydans

    by Lin Dai, Zhina Lian, Yixiu Fu, Xin Zhou, Yong Xu, Xuelian Zhou, Boris N. Kuznetsov, Kankan Jiang

    Gluconic acid has been increasingly in demand in recent years due to the wide applications in the food, healthcare and construction industries. Plant-derived biomass is rich in biopolymers that comprise glucose as the monomeric unit, which provide abundant feedstock for gluconic acid production. Gluconobacter oxydans can rapidly and incompletely oxidize glucose to gluconic acid and it is regarded as ideal industrial microorganism. Once glucose is depleted, the gluconic acid will be further bio-oxidized to 2-ketogluconic acid by Gluconobacter oxydans. The endpoint is difficult to be controlled, especially in an industrial fermentation process. In this study, it was found that the low pH environment (2.5~3.5) could limit the further metabolism of gluconic acid and that it resulted in a yield over 95%. Therefore, the low pH stress strategy for efficiently producing gluconic acid from biomass-derived glucose was put forward and investigated with enzymatic hydrolysate. As a result, 98.8 g/L gluconic acid with a yield of 96% could be obtained from concentrated corncob enzymatic hydrolysate that initially contained 100 g/L glucose with 1.4 g/L cells loading of Gluconobacter oxydans. In addition, the low pH stress strategy could effectively control end-point and decrease the risk of microbial contamination. Overall, this strategy provides a potential for industrial gluconic acid production from lignocellulosic materials.