CTCarl J. Thrasher

Carl J. Thrasher

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Carl J. Thrasher has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Multiscale Design of Interaction-Driven Superlattice Assembly in Nanocomposite Tectons

    by Anushka Jha, Stephen Kronenberger, Carl Thrasher, Nicholas Sbalbi, Matthew D. Ye, Robert Macfarlane, Arthi Jayaraman, Safa Jamali

    Understanding how molecular-scale interactions govern the assembly and processing of nanocomposite tectons (NCTs) is essential for the design of functional nanoparticle superlattices. Here, we present a multiscale simulation framework that connects explicit microscale descriptions of polymer-grafted, supramolecularly functionalized NCTs to mesoscale predictions of superlattice formation and cold sintering. Potentials of mean force (PMFs) extracted from microscale simulations show that the graft length and nanoparticle diameter tune both the depth and range of effective attraction through the interplay of hydrogen bond-mediated association, brush entropy, and core curvature. These interactions predict the emergence of body-centered-cubic order during annealing, with a clear crossover from disordered aggregation to crystallization as the attractions strengthen. Slower annealing and higher concentration both promote larger, more ordered crystallites, whereas an excessive graft length frustrates long-range order. Simulated cold sintering further reveals how compression merges crystalline grains into continuous networks while introducing structural defects. By directly linking NCT chemistry to assembly kinetics and final microstructure, this framework provides mechanistic insights and quantitative guidance for engineering nanoparticle superlattices with tailored order and connectivity.

  • 3D Printing of Poly(methyl methacrylate) by Interfacial Photopolymerization

    by Prajwal Tumkur Mahesh, Cécile A. C. Chazot, Richard B. Church, Michael N. Durso, Carl J. Thrasher, Megan A. Creighton, A. John Hart

    Established light-based additive manufacturing (AM) processes, such as vat polymerization, utilize nonrecyclable thermoset polymers, posing sustainability concerns. This work presents a method for circular photopolymerization three-dimensional (3D) printing of thermoplastic parts, addressing the demand for low-waste production of complex, high-resolution polymer parts. This is achieved through interfacial photopolymerization (IPP), where linear polymer chains form layerwise into entangled networks at the interface between the immiscible organic and aqueous phases. IPP has previously been demonstrated, but with limited chemistries and without 3D structural control. We demonstrate herein a chemistry to form poly(methyl methacrylate) (PMMA) by IPP and a process for multilayer fabrication in a modified commercial projector-based 3D printer. Layer resolution and stability are enhanced using light-absorbing dye and a water-soluble polyethylene glycol (PEG) binder. Postprocessing with controlled air drying and thermal treatment with PEG infiltration preserves geometry and reduces cracking. The resulting composite comprises 75% PEG and 25% PMMA with mechanical properties akin to those of polymer foams. Circularity of the IPP-PMMA process is demonstrated by recycling and reincorporating printed objects across several cycles without significant degradation of properties. Although enhancements in geometric fidelity and mechanical properties are necessary, IPP 3D printing enables, for the first time, digital light processing of recyclable thermoplastic PMMA and PEG-based parts.


  • Open Access

    Dual‐Wavelength Vat Photopolymerization With Dissolvable, Recyclable Support Structures

    by Nicholas S. Diaco, Carl J. Thrasher, Max M. Hughes, Kevin A. Zhou, Michael N. Durso, Saechow Yap, Robert J. Macfarlane, A. John Hart

    Vat photopolymerization (VP) additive manufacturing (AM) is valued for its speed, precision, and material versatility. However, its requirement for support structures limits printable geometries, complicates post‐processing, and generates non‐recyclable waste when typical thermoset resins are used. Here, a wavelength‐selective resin system for VP that enables single‐vat, multi‐material printing with dissolvable supports is introduced. Exposure to visible light produces a rigid, dissolvable thermoplastic, while UV light forms a crosslinked thermoset resistant to dissolution. This process, termed selective solubility vat photopolymerization (SSVP), eliminates the geometric constraints imposed by conventional VP methods, facilitating the creation of complex objects with supports that are removable using green and food‐safe solvents such as D‐limonene and ethyl acetate, as well as mineral oil. Post‐print heat treatment tunes crosslink density and solubility. Dissolved supports can be recycled into fresh resin and reprinted without mechanical property loss, offering a practical, scalable route to reducing waste. Additionally, SSVP provides spatial control of dissolution kinetics, enabling programmable 3D dissolution profiles. By enabling the integration of dissolvable and insoluble regions in a single print, SSVP sets the stage for fully automated and more sustainable AM workflows.


  • Forging Nanoparticle Superlattices with Colloidal Metallurgy

    by Carl J. Thrasher, Nolan J. Murphy-Genao, Nicholas A. Sbalbi, Rebecca L. Li, Theodore Hueckel, Matthew Ye, A. John Hart, Robert J. Macfarlane

    Nanoparticle superlattices present transformative opportunities for material design by enabling precise control over both nanoscale organization and composition; however, translating these assemblies into macroscopic constructs while preserving nanoscale order remains a critical challenge due to the incompatibility of traditional processing techniques with colloidal systems. This study introduces "colloidal metallurgy," a framework for understanding and controlling defect evolution and densification in nanoparticle superlattices during colloidal sintering. We investigate the effects of pressure and temperature to elucidate mechanisms of particle transport, defect annealing, and densification as single-crystal colloidal assemblies coalesce into polycrystalline superlattices. Pressure-driven crystallite fracture is identified as the primary mode of densification, while temperature enhances particle mobility, enabling defect reduction and grain growth. A multistage sintering strategy employing high temperature annealing to grow grains and restore fracture-based capacity for densification was developed to produce dense (∼1% porosity) polycrystals with low defect counts, demonstrating a pathway for processing nanoparticle superlattices. By exploring the parallels and distinctions between atomic and colloidal sintering, this work establishes critical insights into the mechanisms governing colloidal material processing. These findings lay the groundwork for defect engineering in colloidal systems, offering a scalable approach to design macroscopic materials with tailored properties.


  • Open Access

    Forging Nanoparticle Superlattices with Colloidal Metallurgy

    by Carl Thrasher, Nolan Murphy-Genao, Nicholas Sbalbi, Rebecca Li, Theodore Hueckel, Matthew Ye, A. John Hart, Robert Macfarlane

    Nanoparticle superlattices present transformative opportunities for material design by enabling precise control over both nanoscale organization and composition, however, translating these assemblies into macroscopic constructs while preserving nanoscale order remains a critical challenge due to the incompatibility of traditional processing techniques with colloidal systems. This study introduces "colloidal metallurgy," a framework for understanding and controlling defect evolution and densification in nanoparticle superlattices during colloidal sintering. We investigate the effects of pressure and temperature to elucidate mechanisms of particle transport, defect annealing, and densification as single-crystal colloidal assemblies coalesce into polycrystalline superlattices. Pressure-driven crystallite fracture is identified as the primary mode of densification, while temperature enhances particle mobility, enabling defect reduction and grain growth. A multi-stage sintering strategy employing high temperature annealing to grow grains and restore fracture-based capacity for densification was developed to produce dense (~1% porosity) polycrystals with low defect counts, demonstrating a novel pathway for processing nanoparticle superlattices. By exploring the parallels and distinctions between atomic and colloidal sintering, this work establishes critical insights into the mechanisms governing colloidal material processing. These findings lay the groundwork for defect engineering in colloidal systems, offering a scalable approach to design macroscopic materials with tailored properties.

  • Open Access

    Regio‐Selective Mechanical Enhancement of Polymer‐Grafted Nanoparticle Composites via Light‐Mediated Crosslinking

    by Kyungtae Kim, Benjamin C. Grummon, Carl J. Thrasher, Robert J. Macfarlane

    Polymer‐brush‐grafted nanoparticles (PGNPs) that can be covalently crosslinked post‐processing enable the fabrication of mechanically robust and chemically stable polymer nanocomposites with high inorganic filler content. Modifying PGNP brushes to append UV‐activated crosslinkers along the polymer chains would permit a modular crosslinking strategy applicable to a diverse range of nanocomposite compositions. Further, light‐activated crosslinking reactions enable spatial control of crosslink density to program intentionally inhomogeneous mechanical responses. Here, a method of synthesizing composites using UV‐crosslinkable brush‐coated nanoparticles (referred to as UV‐XNPs) is introduced that can be applied to various monomer compositions by incorporating photoinitiators into the polymer brushes. UV crosslinking of processed UV‐XNP structures can increase their tensile modulus up to 15‐fold without any noticeable alteration to their appearance or shape. By using photomasks to alter UV intensity across a sample, intentionally designed inhomogeneities in crosslink density result in predetermined anisotropic shape changes under strain. This unique capability of UV‐XNP materials is applied to stiffness‐patterned flexible electronic substrates that prevent the delamination of rigid components under deformation. The potential of UV‐XNPs as functional, soft device components is further demonstrated by wearable devices that can be modified post‐fabrication to customize their performance, permitting the ability to add functionality to existing device architectures.


  • Open Access

    Scalable, Versatile Synthesis of Ultrathin Polyetherimide Films and Coatings via Interfacial Polymerization

    by Cécile A. C. Chazot, Carl J. Thrasher, Alexander Peraire‐Bueno, Michael N. Durso, Robert J. Macfarlane, A. John Hart

    Polyetherimides (PEI) are high‐performance thermoplastic polymers featuring a high dielectric constant and excellent thermal stability. In particular, PEI thin films are of increasing interest for use in solid‐state capacitors and membranes, yet the cost and thickness are limited by conventional synthesis and thermal drawing techniques. Here, a method of synthesizing ultrathin PEI films and coatings is introduced based on interfacial polymerization (IP) of poly(amic acid), followed by thermal imidization. Control of transport, reaction, and precipitation kinetics enables tailoring of PEI film morphology from a nanometer‐scale smooth film to a porous micrometer‐scale layer of polymer microparticles. At short reaction times (≈1 min) freestanding films are formed with ≈1 µm thickness, which to our knowledge surpass commercial state‐of‐the‐art films (3–5 µm minimum thickness) made by thermal drawing. PEI films synthesized via the IP route have thermal and optical properties on par with conventional PEI. The use of the final PEI is demonstrated in structurally colored films, dielectric layers in capacitors, and show that the IP route can form nanometer‐scale coatings on carbon nanotubes. The rapid film formation rate and fine property control are attractive for scale‐up, and established methods for roll‐to‐roll processing can be applied in future work.