Kuntal Maity
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Kuntal Maity has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Dipankar Mandal
Institute of Nano Science and Technology
8 shared publications Dipankar Mandal
6 shared publicationsSamiran Garain
Organic Nano-Piezoelectric Device Laboratory, Department of Physics, Jadavpur University, Kolkata 700032, India
4 shared publicationsBiswajit Mahanty
3 shared publicationsDieter Schmeißer
Applied Physics and Sensor Technology, Brandenburg University of Technology Cottbus−Senftenberg, Konrad-Wachsmann-Allee 17, 03046 Cottbus, Germany
3 shared publications- Karsten Henkel
Applied Physics and Semiconductor Spectroscopy Brandenburg University of Technology Cottbus-Senftenberg Konrad-Zuse-Strasse 1 03046 Cottbus Germany
3 shared publications
Latest Publications
- 10 March 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (11) , 13956-13970
Cellulose Nanocrystal-Based All-3D-Printed Pyro-Piezoelectric Nanogenerator for Hybrid Energy Harvesting and Self-Powered Cardiorespiratory Monitoring toward the Human–Machine Interface
Biomaterials with spontaneous piezoelectric property are highly emerging in recent times for the generation of electricity from mechanical energy sources that are amply available in nature. In this context, pyroelectricity, an integral property of piezoelectric materials, might be an interesting tool in harvesting thermal energy from the fluctuations of temperature. On the other hand, respiration and heart pulse are the significant human vital signs that can be used for early detection and prevention of cardiorespiratory diseases. Here, we report an all-three-dimensional (3D)-printed pyro-piezoelectric nanogenerator (Py-PNG) based on the most abundant and completely biodegradable biopolymer on earth, i.e., cellulose nanocrystal (CNC) for hybrid (mechanical as well as thermal) energy harvesting, and interestingly, the NG could be used as an e-skin sensor for application in self-powered noninvasive cardiorespiratory monitoring for personal healthcare. Notably, the CNC-based device will be biocompatible and economically advantageous due to its biomaterial-based supremacy and huge availability. This is an original approach with 3D geometrical advancement in designing a NG/sensor, where the unique all-3D-printed manner is adopted, and certainly, it has promising potential in reducing the number of processing steps to required equipment during the multilayer fabrication. The all-3D-printed NG/sensor shows outstanding mechano-thermal energy harvesting performance along with sensitivity and is capable of accurate detection of heart pulse as well as respiration, whenever and whichever required without the need of any battery or an external power supply. In addition, we have also extended its application in demonstrating a smart mask-based breath monitoring system. Thus, the real-time cardiorespiratory monitoring provides notable and fascinating information in medical diagnosis, stepping toward biomedical device development and human-machine interface.
- 10 March 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (11) , 13956-13970
Cellulose Nanocrystal-Based All-3D-Printed Pyro-Piezoelectric Nanogenerator for Hybrid Energy Harvesting and Self-Powered Cardiorespiratory Monitoring toward the Human–Machine Interface
Biomaterials with spontaneous piezoelectric property are highly emerging in recent times for the generation of electricity from mechanical energy sources that are amply available in nature. In this context, pyroelectricity, an integral property of piezoelectric materials, might be an interesting tool in harvesting thermal energy from the fluctuations of temperature. On the other hand, respiration and heart pulse are the significant human vital signs that can be used for early detection and prevention of cardiorespiratory diseases. Here, we report an all-three-dimensional (3D)-printed pyro-piezoelectric nanogenerator (Py-PNG) based on the most abundant and completely biodegradable biopolymer on earth, i.e., cellulose nanocrystal (CNC) for hybrid (mechanical as well as thermal) energy harvesting, and interestingly, the NG could be used as an e-skin sensor for application in self-powered noninvasive cardiorespiratory monitoring for personal healthcare. Notably, the CNC-based device will be biocompatible and economically advantageous due to its biomaterial-based supremacy and huge availability. This is an original approach with 3D geometrical advancement in designing a NG/sensor, where the unique all-3D-printed manner is adopted, and certainly, it has promising potential in reducing the number of processing steps to required equipment during the multilayer fabrication. The all-3D-printed NG/sensor shows outstanding mechano-thermal energy harvesting performance along with sensitivity and is capable of accurate detection of heart pulse as well as respiration, whenever and whichever required without the need of any battery or an external power supply. In addition, we have also extended its application in demonstrating a smart mask-based breath monitoring system. Thus, the real-time cardiorespiratory monitoring provides notable and fascinating information in medical diagnosis, stepping toward biomedical device development and human-machine interface.
- 19 September 2022
- Published by DEStech Publications
CHARACTERIZATION AND IMPROVISATION OF DIRECT- INK-WRITING (DIW) TECHNIQUE WITH IN-SITU ELECTRIC FIELD TO PRINT HIGHLY ALIGNED CARBON FIBER/EPOXY COMPOSITE
An investigation is presented on direct-ink-writing (DIW) of carbon fiber epoxy composite with and without an electric field. Initial emphasis is focused on the importance of DIW and a common notion that DIW/3D printing aids in better alignment across a printed specimen. For this purpose, the DIW technique is utilized in printing a single filament dog bone specimen, and uniaxial tensile tests were performed on all printed specimens. Furthermore, the microstructure of the printed sample and the fracture surface of the specimens was performed using a high-resolution scanning electron microscope (SEM). It was found that the fibers adjacent to the surface of the printed specimens were highly aligned along the printing direction, whereas the fibers at the core remain mostly misaligned. This could be due to the high shear stress and higher change in velocity gradient of the ink at the inner nozzle wall, which leads to better alignment of the fibers along the print direction. However, very little or negligible change in shear stress and velocity gradient at the core of the ink filament at the nozzle leads to poor alignment of the fibers during extrusion. Thus, integrating DIW and the electric field was conceived, which could effectively be used to align fibers at the surface and the core of the ink filament during the extrusion of the ink. The in-situ electric field, in association with the direct ink writing fabrication (iEF-DIW) technique, effectively aids in controlling both in-plane and through-thickness properties of the composite by controlling the alignment of the carbon fibers. This fabrication technique could effectively replace most of the conventional as well as cumbersome methods that are used to orient/align fibers/fillers in the desired direction.
- 19 September 2022
- Published by DEStech Publications
CHARACTERIZATION AND IMPROVISATION OF DIRECT- INK-WRITING (DIW) TECHNIQUE WITH IN-SITU ELECTRIC FIELD TO PRINT HIGHLY ALIGNED CARBON FIBER/EPOXY COMPOSITE
An investigation is presented on direct-ink-writing (DIW) of carbon fiber epoxy composite with and without an electric field. Initial emphasis is focused on the importance of DIW and a common notion that DIW/3D printing aids in better alignment across a printed specimen. For this purpose, the DIW technique is utilized in printing a single filament dog bone specimen, and uniaxial tensile tests were performed on all printed specimens. Furthermore, the microstructure of the printed sample and the fracture surface of the specimens was performed using a high-resolution scanning electron microscope (SEM). It was found that the fibers adjacent to the surface of the printed specimens were highly aligned along the printing direction, whereas the fibers at the core remain mostly misaligned. This could be due to the high shear stress and higher change in velocity gradient of the ink at the inner nozzle wall, which leads to better alignment of the fibers along the print direction. However, very little or negligible change in shear stress and velocity gradient at the core of the ink filament at the nozzle leads to poor alignment of the fibers during extrusion. Thus, integrating DIW and the electric field was conceived, which could effectively be used to align fibers at the surface and the core of the ink filament during the extrusion of the ink. The in-situ electric field, in association with the direct ink writing fabrication (iEF-DIW) technique, effectively aids in controlling both in-plane and through-thickness properties of the composite by controlling the alignment of the carbon fibers. This fabrication technique could effectively replace most of the conventional as well as cumbersome methods that are used to orient/align fibers/fillers in the desired direction.
- 1 February 2022
- Published by Elsevier in Nano Energy
- Vol. 92
Piezo-phototronic effect in highly stable CsPbI3-PVDF composite for self-powered nanogenerator and photodetector
- 1 February 2022
- Published by Elsevier in Nano Energy
- Vol. 92
Piezo-phototronic effect in highly stable CsPbI3-PVDF composite for self-powered nanogenerator and photodetector
- 20 September 2021
- Published by DEStech Publications
DIRECT-INK-WRITING (DIW) OF HIGHER WEIGHT CONCENTRATION OF MILLED CARBON FIBER (MCF) REINFORCED EPOXY COMPOSITE
Additive manufacturing or 3D printing of short carbon fiber composites is highly inclined toward thermoplastic material. Recently, there is some interest in developing 3D printing technology for thermosetting polymers and composites. Direct-ink-writing (DIW) of short fiber epoxy composites containing milled carbon fibers (MCF) exhibits the potential to replace the traditional composite material as it showcases the inherent capability of fabricating complex geometries, facile material processing, continuous printing capability coupled with low cost. Previous research in 3D printing of short carbon fiber epoxy composites suffered heavily from the limitation of printing low carbon fiber weight concentrations. This study developed a straightforward technique of designing the epoxy ink containing high weight concentration MCF (~40wt%) and a small concentration of thixotropic filler (3-wt%) for DIW using a pneumatic pressure-driven extruder having micron size tapered nozzle. This paper also intends to contribute to a better understanding of the effect of printing parameters on DIW. Furthermore, the printing parameters were optimized using non-dimensionalized constant C. Optimized printing condition was further used to print different geometry ranging from dog bone with 100% infill to 4-layer hollow circle and 3-layer hollow square with 0% infill. Lastly, ink exhibits the capability to self-support multi-layer geometrical structures during printing.
- 20 September 2021
- Published by DEStech Publications
DIRECT-INK-WRITING (DIW) OF HIGHER WEIGHT CONCENTRATION OF MILLED CARBON FIBER (MCF) REINFORCED EPOXY COMPOSITE
Additive manufacturing or 3D printing of short carbon fiber composites is highly inclined toward thermoplastic material. Recently, there is some interest in developing 3D printing technology for thermosetting polymers and composites. Direct-ink-writing (DIW) of short fiber epoxy composites containing milled carbon fibers (MCF) exhibits the potential to replace the traditional composite material as it showcases the inherent capability of fabricating complex geometries, facile material processing, continuous printing capability coupled with low cost. Previous research in 3D printing of short carbon fiber epoxy composites suffered heavily from the limitation of printing low carbon fiber weight concentrations. This study developed a straightforward technique of designing the epoxy ink containing high weight concentration MCF (~40wt%) and a small concentration of thixotropic filler (3-wt%) for DIW using a pneumatic pressure-driven extruder having micron size tapered nozzle. This paper also intends to contribute to a better understanding of the effect of printing parameters on DIW. Furthermore, the printing parameters were optimized using non-dimensionalized constant C. Optimized printing condition was further used to print different geometry ranging from dog bone with 100% infill to 4-layer hollow circle and 3-layer hollow square with 0% infill. Lastly, ink exhibits the capability to self-support multi-layer geometrical structures during printing.
- 2 September 2021
- Published by Springer Nature
- p. 269-283
Towards the Development of Triboelectricity-Based Virus Killer Face Mask for COVID-19: Role of Different Inputs
- 2 September 2021
- Published by Springer Nature
- p. 269-283
Towards the Development of Triboelectricity-Based Virus Killer Face Mask for COVID-19: Role of Different Inputs
- Open Access
- 12 May 2021
- Published by Royal Society of Chemistry (RSC) in Materials Advances
- Vol. 2 (13) , 4370-4379
All-fiber pyro- and piezo-electric nanogenerator for IoT based self-powered health-care monitoring
In this work, an all-fiber pyro- and piezo-electric nanogenerator (PPNG) is designed using multiwall carbon nanotube (MWCNT) doped poly(vinylidene fluoride) (PVDF) electrospun nanofibers as the active layer and an interlocked conducting micro-fiber based electrode for converting both thermal and mechanical energies into useful electrical power. The PPNG generates high electrical throughput (output voltage ∼35 V, maximum power density ∼34 μW cm−2 and power conversion efficiency (ηpiezo) ∼ 19.3%) with an ultra-fast response time of ∼10 ms. Owing to the higher piezoelectric charge co-efficient (|d33| ∼ 51.3 pC N−1) and figure of merit (FoM ≈ 5.95 × 10−11 Pa−1) of PVDF–MWCNT nanofibers in comparison to the neat PVDF nanofibers (|d33| ∼ 22 pC N−1 and FoM ≈ 9.7 × 10−12 Pa−1) the PPNG operates a range of consumer electronic components such as capacitors and light emitting diodes. Furthermore, the electroactive phase content (∼87%) is improved in the active layer due to the interfacial interaction between the surface charges at from the π-electron cloud of the MWCNT and –CH2– dipoles of the PVDF chain. Additionally, the PVDF–MWCNT nanofibers possess fifteen times higher pyroelectric coefficient (∼60 nC m−2 K−1) compared to that of neat PVDF nanofibers (4 nC m−2 K−1). As a result, the PPNG is capable of converting very large temperature fluctuations (ΔT ∼ 14.30 K) to electrical energy (such as the open-circuit voltage of 250 mV and a short-circuit current of 83 pA). Besides this, it is capable of detecting very low-level thermal fluctuations (as low as ΔT ∼ 5.4 K) with responsivity of ∼1.48 s and possesses very high mechano-sensitivity (∼7.5 V kPa−1) which makes it feasible for use as a biomedical sensor since the body temperature and bio-mechanical signals (such as breathing temperature, pulse rate, vocal cord vibrations, coughing sound, and so on) have an immense signature of health conditions. As a proof-of-concept, the all-fiber PPNG is employed as a biomedical sensor by integrating with the Internet of Things (IoT) based human health care monitoring system as well as for remote care of infectious diseases (e.g., applicable for pneumonia, COVID-19) by transferring the pulse response, body temperature, coughing and laughing response wirelessly to a smartphone.
- 12 May 2021
- Published by Royal Society of Chemistry (RSC) in Materials Advances
- Vol. 2 (13) , 4370-4379
Open AccessAll-fiber pyro- and piezo-electric nanogenerator for IoT based self-powered health-care monitoring
In this work, an all-fiber pyro- and piezo-electric nanogenerator (PPNG) is designed using multiwall carbon nanotube (MWCNT) doped poly(vinylidene fluoride) (PVDF) electrospun nanofibers as the active layer and an interlocked conducting micro-fiber based electrode for converting both thermal and mechanical energies into useful electrical power. The PPNG generates high electrical throughput (output voltage ∼35 V, maximum power density ∼34 μW cm−2 and power conversion efficiency (ηpiezo) ∼ 19.3%) with an ultra-fast response time of ∼10 ms. Owing to the higher piezoelectric charge co-efficient (|d33| ∼ 51.3 pC N−1) and figure of merit (FoM ≈ 5.95 × 10−11 Pa−1) of PVDF–MWCNT nanofibers in comparison to the neat PVDF nanofibers (|d33| ∼ 22 pC N−1 and FoM ≈ 9.7 × 10−12 Pa−1) the PPNG operates a range of consumer electronic components such as capacitors and light emitting diodes. Furthermore, the electroactive phase content (∼87%) is improved in the active layer due to the interfacial interaction between the surface charges at from the π-electron cloud of the MWCNT and –CH2– dipoles of the PVDF chain. Additionally, the PVDF–MWCNT nanofibers possess fifteen times higher pyroelectric coefficient (∼60 nC m−2 K−1) compared to that of neat PVDF nanofibers (4 nC m−2 K−1). As a result, the PPNG is capable of converting very large temperature fluctuations (ΔT ∼ 14.30 K) to electrical energy (such as the open-circuit voltage of 250 mV and a short-circuit current of 83 pA). Besides this, it is capable of detecting very low-level thermal fluctuations (as low as ΔT ∼ 5.4 K) with responsivity of ∼1.48 s and possesses very high mechano-sensitivity (∼7.5 V kPa−1) which makes it feasible for use as a biomedical sensor since the body temperature and bio-mechanical signals (such as breathing temperature, pulse rate, vocal cord vibrations, coughing sound, and so on) have an immense signature of health conditions. As a proof-of-concept, the all-fiber PPNG is employed as a biomedical sensor by integrating with the Internet of Things (IoT) based human health care monitoring system as well as for remote care of infectious diseases (e.g., applicable for pneumonia, COVID-19) by transferring the pulse response, body temperature, coughing and laughing response wirelessly to a smartphone.
- 1 January 2021
- Published by Elsevier
- p. 239-282
Piezoelectric polymers and composites for multifunctional materials
- 1 January 2021
- Published by Elsevier
- p. 239-282
Piezoelectric polymers and composites for multifunctional materials
- 5 November 2020
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2265 (1) , 030655
Polymer nanofiber based triboelectric nanogenerator for energy harvesting and self-powered electronics
In this work, electrospun nanofibers (NFs) (ESPUNFs) of Polyurethane (PU) have been prepared through the electrospinning process. The prepared electrospun (ESPUNFs) shows the average fiber diameter ranges from 90-225 nm while the maximum number of fibers possess diameter of 135 nm. The prepared triboelectric nanogenerator (TENG) with ESPUNFs (PU-TENG) demonstrates the output performance such as, open-circuit voltage∼2.3 V under 8kPa of compressive stress, approximated output power of 2.0 µW. The available maximum output load current is about 0.35 µA. The fabricated PU-TENG can turn on three light emitting diodes (LEDs). It is also found that the designed PU-TENG can charge up different capacitors (such as, 1 µF, 2.2 µF and 4.7 µF) by repetitive compressive stress. This work shows a very simple and cost effective method to fabricate the triboelectric nanogenerator for self-powered flexible electronics.
- 5 November 2020
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2265 (1) , 030655
Polymer nanofiber based triboelectric nanogenerator for energy harvesting and self-powered electronics
In this work, electrospun nanofibers (NFs) (ESPUNFs) of Polyurethane (PU) have been prepared through the electrospinning process. The prepared electrospun (ESPUNFs) shows the average fiber diameter ranges from 90-225 nm while the maximum number of fibers possess diameter of 135 nm. The prepared triboelectric nanogenerator (TENG) with ESPUNFs (PU-TENG) demonstrates the output performance such as, open-circuit voltage∼2.3 V under 8kPa of compressive stress, approximated output power of 2.0 µW. The available maximum output load current is about 0.35 µA. The fabricated PU-TENG can turn on three light emitting diodes (LEDs). It is also found that the designed PU-TENG can charge up different capacitors (such as, 1 µF, 2.2 µF and 4.7 µF) by repetitive compressive stress. This work shows a very simple and cost effective method to fabricate the triboelectric nanogenerator for self-powered flexible electronics.
- Top Cited Papers
- 16 January 2020
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 2 (2) , 862-878
Self-Powered Human-Health Monitoring through Aligned PVDF Nanofibers Interfaced Skin-Interactive Piezoelectric Sensor
- 16 January 2020
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 2 (2) , 862-878
Top Cited PapersSelf-Powered Human-Health Monitoring through Aligned PVDF Nanofibers Interfaced Skin-Interactive Piezoelectric Sensor