Tengli Yu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tengli Yu has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
- Ershen Wang
Shenyang Aerospace University
11 shared publications - Song Xu
Shenyang Aerospace University
9 shared publications - Pingping Qu
College of Electronic Information Engineering, Shenyang Aerospace University, Shenyang, China
6 shared publications - Yunhao Chen
School of Electrical and Information Engineering, Yunnan Minzu University, Kunming 650500, China
3 shared publications Deyan Wang
Beijing Institute of Aerospace Control Devices
2 shared publicationsShiyu Jia
The State Key Laboratory of Comprehensive Space-time Network and Equipment Technology
2 shared publications
Latest Publications
- 1 November 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (21) , 215233
BDSBAS/MSAS fusion positioning algorithm based on sliding window variance component estimation enhanced by feedforward neural network and factor graph optimization
To address the limitation of positioning accuracy in single Satellite-Based Augmentation Systems (SBAS) imposed by regional service performance, this paper proposes a BeiDou SBAS (BDSBAS)/Multifunctional satellite augmentation system (MSAS) fusion positioning algorithm based on sliding window variance component estimation (SW-VCE) enhanced by feedforward neural network (FNN) and factor graph optimization (FGO). First, SW-VCE is employed to estimate the positioning variance of each system in real time. Combined with median absolute deviation robust estimation and the Huber weighting function, robust adaptive weighted fusion is achieved. Second, a 12-dimensional quality feature vector is constructed, comprising six basic statistical features and six system-consistency and spatio-temporal evolution features, to train an FNN that learns the nonlinear mapping from quality features to fusion weight correction factors. Third, FGO is introduced to perform global optimization over the temporal position sequence through modeling with observation factors and smoothing factors, together with the Huber robust kernel function. Finally, the algorithm is validated through static tests at IGS stations BJFS and SEJN as well as a vehicle-borne dynamic test in an urban environment in Qingdao. Experimental results show that in static testing, the SW-VCE + FNN + FGO fusion algorithm improves positioning accuracy by an average of 41.1% over the single-system BDSBAS solution, 41.6% over the single-system MSAS solution, and 26.4% over the position domain integration (PDI) method. In dynamic testing, the fusion algorithm achieves improvements of 36.8% over BDSBAS, 24.3% over MSAS, and 19.4% over PDI, confirming the effectiveness and robustness of the proposed algorithm under both static and dynamic scenarios.
- 1 November 2026
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (21) , 215233
BDSBAS/MSAS fusion positioning algorithm based on sliding window variance component estimation enhanced by feedforward neural network and factor graph optimization
To address the limitation of positioning accuracy in single Satellite-Based Augmentation Systems (SBAS) imposed by regional service performance, this paper proposes a BeiDou SBAS (BDSBAS)/Multifunctional satellite augmentation system (MSAS) fusion positioning algorithm based on sliding window variance component estimation (SW-VCE) enhanced by feedforward neural network (FNN) and factor graph optimization (FGO). First, SW-VCE is employed to estimate the positioning variance of each system in real time. Combined with median absolute deviation robust estimation and the Huber weighting function, robust adaptive weighted fusion is achieved. Second, a 12-dimensional quality feature vector is constructed, comprising six basic statistical features and six system-consistency and spatio-temporal evolution features, to train an FNN that learns the nonlinear mapping from quality features to fusion weight correction factors. Third, FGO is introduced to perform global optimization over the temporal position sequence through modeling with observation factors and smoothing factors, together with the Huber robust kernel function. Finally, the algorithm is validated through static tests at IGS stations BJFS and SEJN as well as a vehicle-borne dynamic test in an urban environment in Qingdao. Experimental results show that in static testing, the SW-VCE + FNN + FGO fusion algorithm improves positioning accuracy by an average of 41.1% over the single-system BDSBAS solution, 41.6% over the single-system MSAS solution, and 26.4% over the position domain integration (PDI) method. In dynamic testing, the fusion algorithm achieves improvements of 36.8% over BDSBAS, 24.3% over MSAS, and 19.4% over PDI, confirming the effectiveness and robustness of the proposed algorithm under both static and dynamic scenarios.
- 3 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 8509817
UWB Positioning in Complex Environments: A Soft Computing-Based Error Estimation Method
In complex measurement environments, Ultra-Wideband (UWB) positioning systems often face significant measurement uncertainties and reduced accuracy due to multipath propagation and Non-Line-of-Sight (NLOS) interference. This paper proposes a soft-computing-based UWB measurement correction framework—the Adaptive Noise Wavelet Packet Network (ANWP-Net)—to improve the accuracy of dynamic positioning in complex environments. First, a heuristic-based Noise Adaptive Wavelet Packet Transform (NA-WPT) module is introduced for signal preprocessing, aiming to suppress non-stationary noise and improve the integrity of ranging observations. Second, a Deep Bidirectional Long Short-Term Memory (D-BILSTM) module is employed to model nonlinear ranging errors with temporal correlations and to estimate ranging correction values for each anchor based on conditional sequence measurement results. Subsequently, the corrected distances are combined with the known anchor coordinates, and a standard least-squares multilateration solver is used to recover the final target position. Experimental results show that, compared to baseline methods, the proposed ANWP-Net reduces the average localization error by 52.2% in simulation experiments, and by 38.4% and 81.8% in indoor and outdoor physical experiments, respectively.
- 3 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 8509817
UWB Positioning in Complex Environments: A Soft Computing-Based Error Estimation Method
In complex measurement environments, Ultra-Wideband (UWB) positioning systems often face significant measurement uncertainties and reduced accuracy due to multipath propagation and Non-Line-of-Sight (NLOS) interference. This paper proposes a soft-computing-based UWB measurement correction framework—the Adaptive Noise Wavelet Packet Network (ANWP-Net)—to improve the accuracy of dynamic positioning in complex environments. First, a heuristic-based Noise Adaptive Wavelet Packet Transform (NA-WPT) module is introduced for signal preprocessing, aiming to suppress non-stationary noise and improve the integrity of ranging observations. Second, a Deep Bidirectional Long Short-Term Memory (D-BILSTM) module is employed to model nonlinear ranging errors with temporal correlations and to estimate ranging correction values for each anchor based on conditional sequence measurement results. Subsequently, the corrected distances are combined with the known anchor coordinates, and a standard least-squares multilateration solver is used to recover the final target position. Experimental results show that, compared to baseline methods, the proposed ANWP-Net reduces the average localization error by 52.2% in simulation experiments, and by 38.4% and 81.8% in indoor and outdoor physical experiments, respectively.
- 17 April 2026
- Published by World Scientific Pub Co Pte Ltd in Unmanned Systems
- p. 1-18
UAV Swarm Collaborative Transhipment Scheduling with Deep Reinforcement Learning
As intelligent manufacturing continues to emerge as a dominant industrial paradigm, unmanned aerial vehicles (UAVs) have proven instrumental in enhancing workshop transhipment efficiency through their inherent operational flexibility. In this paper, we develop a comprehensive UAV swarm collaborative transhipment scheduling model with respect to three-dimensional continuous environments, and introduce Soft-QMIX that systematically integrates maximum entropy with an order-preserving transformation mechanism into collaborative transhipment scheduling tasks, which shows that it can effectively enhance the strategy exploration capability within three-dimensional continuous action spaces and significantly improve UAV’s ability to achieve globally optimal strategies. Besides, a comprehensive simulation environment for three-dimensional UAV swarm scheduling is constructed, with experimental evaluations conducted under different UAV swarm sizes. The results reveal that Soft-QMIX consistently delivers superior cumulative rewards, loss stability, and execution efficiency, approximately achieving 7% increase in cumulative reward for 4-UAV swarm and 5% increase for 8-UAV swarm compared with QMIX. Meanwhile, compared with QMIX, the execution efficiency is improved approximately by 8% and 12.5% for 4-UAV and 8-UAV swarm, respectively. Our work will provide insights for collaborative transhipment scheduling of UAV swarm in complex three-dimensional continuous scenes.
- 17 April 2026
- Published by World Scientific Pub Co Pte Ltd in Unmanned Systems
- p. 1-18
UAV Swarm Collaborative Transhipment Scheduling with Deep Reinforcement Learning
As intelligent manufacturing continues to emerge as a dominant industrial paradigm, unmanned aerial vehicles (UAVs) have proven instrumental in enhancing workshop transhipment efficiency through their inherent operational flexibility. In this paper, we develop a comprehensive UAV swarm collaborative transhipment scheduling model with respect to three-dimensional continuous environments, and introduce Soft-QMIX that systematically integrates maximum entropy with an order-preserving transformation mechanism into collaborative transhipment scheduling tasks, which shows that it can effectively enhance the strategy exploration capability within three-dimensional continuous action spaces and significantly improve UAV’s ability to achieve globally optimal strategies. Besides, a comprehensive simulation environment for three-dimensional UAV swarm scheduling is constructed, with experimental evaluations conducted under different UAV swarm sizes. The results reveal that Soft-QMIX consistently delivers superior cumulative rewards, loss stability, and execution efficiency, approximately achieving 7% increase in cumulative reward for 4-UAV swarm and 5% increase for 8-UAV swarm compared with QMIX. Meanwhile, compared with QMIX, the execution efficiency is improved approximately by 8% and 12.5% for 4-UAV and 8-UAV swarm, respectively. Our work will provide insights for collaborative transhipment scheduling of UAV swarm in complex three-dimensional continuous scenes.
- 27 March 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (12) , 126304
Robust visual pose measurement and uncertainty suppression for UAVs in dynamic landing environments
High-precision relative attitude measurement is a critical prerequisite for autonomous recovery of micro unmanned aerial vehicles (UAVs) in GNSS-restricted and dynamic environments. However, motion blur and drastic scale changes often lead to a surge in visual observation noise, causing significant drift in state estimation. To address this, this paper proposes a holistic visual metrology system that deeply fuses enhanced perception with uncertainty suppression. First, at the perception layer, an improved YOLO11n-Landing network serves as a high-fidelity instrument, utilizing multi-scale feature enhancement and anti-blur attention mechanisms to boost detection confidence in dynamic scenes. Second, a height-constrained Kalman filter was constructed at the fusion layer, explicitly managing uncertainty propagation through a physical covariance model. The validity of the optimal fusion interval was confirmed based on parameter sensitivity analysis. Crucially, at the system level, a perception-control coupled isolation mechanism has been introduced. Unlike traditional loosely coupled architectures, this mechanism uses the visual confidence factor as an information hub, synchronously mapping it to the filter covariance, switching gain K , and boundary layer thickness. This dynamically reconstructs the system’s response bandwidth, actively isolating invalid observations, and physically blocking the propagation of measurement outliers into the control loop. Experimental results demonstrate that compared to traditional benchmark methods, this integrated system significantly converges the root mean square error to 0.156 m, reduces the error variance by approximately 74.7%, and achieves a 99.0% landing success rate in Monte Carlo simulations. This work not only provides a highly system-integrity-preserving technical solution for robust autonomous landing of micro UAVs, but its core coupling paradigm also demonstrates broad prospects for generalization to high-risk tasks such as aerial docking and close-range inspection.
- 27 March 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (12) , 126304
Robust visual pose measurement and uncertainty suppression for UAVs in dynamic landing environments
High-precision relative attitude measurement is a critical prerequisite for autonomous recovery of micro unmanned aerial vehicles (UAVs) in GNSS-restricted and dynamic environments. However, motion blur and drastic scale changes often lead to a surge in visual observation noise, causing significant drift in state estimation. To address this, this paper proposes a holistic visual metrology system that deeply fuses enhanced perception with uncertainty suppression. First, at the perception layer, an improved YOLO11n-Landing network serves as a high-fidelity instrument, utilizing multi-scale feature enhancement and anti-blur attention mechanisms to boost detection confidence in dynamic scenes. Second, a height-constrained Kalman filter was constructed at the fusion layer, explicitly managing uncertainty propagation through a physical covariance model. The validity of the optimal fusion interval was confirmed based on parameter sensitivity analysis. Crucially, at the system level, a perception-control coupled isolation mechanism has been introduced. Unlike traditional loosely coupled architectures, this mechanism uses the visual confidence factor as an information hub, synchronously mapping it to the filter covariance, switching gain K , and boundary layer thickness. This dynamically reconstructs the system’s response bandwidth, actively isolating invalid observations, and physically blocking the propagation of measurement outliers into the control loop. Experimental results demonstrate that compared to traditional benchmark methods, this integrated system significantly converges the root mean square error to 0.156 m, reduces the error variance by approximately 74.7%, and achieves a 99.0% landing success rate in Monte Carlo simulations. This work not only provides a highly system-integrity-preserving technical solution for robust autonomous landing of micro UAVs, but its core coupling paradigm also demonstrates broad prospects for generalization to high-risk tasks such as aerial docking and close-range inspection.
- 1 March 2026
- Published by Elsevier in Digital Signal Processing
- Vol. 176
MCRF-Net: A low visible airport runway instance segmentation method based on improved YOLOv8s-seg
- 1 March 2026
- Published by Elsevier in Digital Signal Processing
- Vol. 176
MCRF-Net: A low visible airport runway instance segmentation method based on improved YOLOv8s-seg
- 20 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-16
A Multistep Ambiguity Subset Optimization Algorithm for RTK Positioning in Dynamic Environment
With the increasing demand for high-precision navigation applications, traditional real-time kinematic (RTK) algorithm faces the problems of low ambiguity fixation rate and large error fluctuation in dynamic environment. In order to improve the accuracy and reliability of positioning algorithms, this paper proposes a covariance-driven ambiguity subset preference and adaptive threshold partial ambiguity resolution (CDAT-PAR) algorithm to address the low quality ambiguity interference problem in the ambiguity fixation process. To improve the success rate of ambiguity fixation, the covariance matrix factor is used to divide the quality of the ambiguity subsets, sort and select the ambiguity subsets that satisfy the low correlation, and establish new integer ambiguities and covariance matrices. In order to prevent incorrect ambiguity fixation, the ambiguity fixation threshold is optimized by constructing carrier motion state features and applying a polynomial coefficient algorithm. By integrating the two strategies, a complete set of ambiguity screening-fixation-verification optimization schemes is formed, and more robust relative positioning results are obtained. This paper carried out static, low-dynamics vehicle, and general aviation aircraft relative positioning experiments respectively. The experimental results show that in different experimental environment, the positioning accuracy of CDAT-PAR is improved by 26.40%, 27.78% and 59.46% compared with the RTKLIB algorithm, and the fixation rate is improved to 99.64%, 87.11% and 92.02%, and the dynamic positioning accuracy is improved to the decimeter level. The proposed algorithm effectively improves the ambiguity fixation success rate and positioning accuracy in dynamic environment, especially in environment with weak satellite geometry or poor signal quality.
- 20 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-16
A Multistep Ambiguity Subset Optimization Algorithm for RTK Positioning in Dynamic Environment
With the increasing demand for high-precision navigation applications, traditional real-time kinematic (RTK) algorithm faces the problems of low ambiguity fixation rate and large error fluctuation in dynamic environment. In order to improve the accuracy and reliability of positioning algorithms, this paper proposes a covariance-driven ambiguity subset preference and adaptive threshold partial ambiguity resolution (CDAT-PAR) algorithm to address the low quality ambiguity interference problem in the ambiguity fixation process. To improve the success rate of ambiguity fixation, the covariance matrix factor is used to divide the quality of the ambiguity subsets, sort and select the ambiguity subsets that satisfy the low correlation, and establish new integer ambiguities and covariance matrices. In order to prevent incorrect ambiguity fixation, the ambiguity fixation threshold is optimized by constructing carrier motion state features and applying a polynomial coefficient algorithm. By integrating the two strategies, a complete set of ambiguity screening-fixation-verification optimization schemes is formed, and more robust relative positioning results are obtained. This paper carried out static, low-dynamics vehicle, and general aviation aircraft relative positioning experiments respectively. The experimental results show that in different experimental environment, the positioning accuracy of CDAT-PAR is improved by 26.40%, 27.78% and 59.46% compared with the RTKLIB algorithm, and the fixation rate is improved to 99.64%, 87.11% and 92.02%, and the dynamic positioning accuracy is improved to the decimeter level. The proposed algorithm effectively improves the ambiguity fixation success rate and positioning accuracy in dynamic environment, especially in environment with weak satellite geometry or poor signal quality.
- 17 September 2025
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 36 (9) , 096307
BDS receiver autonomous integrity monitoring algorithm assisted by baseband domain parameters
The vulnerability of the BeiDou satellite navigation signal and the complexity of its transmission environment lead to abnormal events when it reaches the baseband domain, such as ‘evil waveform (EWF)’ and multipath (MP) effects caused by diffuse reflections. These abnormal events lead to code phase errors in the receiver tracking loop, which ultimately result in tiny pseudo-range biases. The traditional receiver autonomous integrity monitoring (RAIM) algorithm detects faults in receiver terminals (measurement domain), but it is difficult to detect tiny pseudo-range biases caused by distorted signals in the baseband domain. This study proposed a baseband domain parameter assisted RAIM algorithm to solve the limitations of traditional RAIM. Firstly, a baseband domain faults detection and exclusion (BDDE) method is constructed, which integrates baseband domain monitoring parameters such as the squared distance of the sample set vectors, carrier-to-noise ratio, and position-velocity-time solution time for detecting the two types of distorted signals, MP and EWF. Secondly, the fault exclusion weights of the measurement domain and baseband domain modules are reasonably assigned by designing the weight factors of the fusion of BDDE and RAIM. The simulation and real experiment results show that the BDDE method is able to detect the occurrence time and duration of BeiDou B1I distorted signals in the baseband domain. Compared with the RAIM and the extended Kalman filter based RAIM algorithm, simulation experiments show that the position accuracy of BDDE assisted RAIM algorithm can be improved by 16.33% and 8.48%, respectively, and real experimental results in a MP environment show that the position accuracy of BDDE assisted RAIM algorithm is improved by 36.48% and 20.35%, respectively.
- 17 September 2025
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 36 (9) , 096307
BDS receiver autonomous integrity monitoring algorithm assisted by baseband domain parameters
The vulnerability of the BeiDou satellite navigation signal and the complexity of its transmission environment lead to abnormal events when it reaches the baseband domain, such as ‘evil waveform (EWF)’ and multipath (MP) effects caused by diffuse reflections. These abnormal events lead to code phase errors in the receiver tracking loop, which ultimately result in tiny pseudo-range biases. The traditional receiver autonomous integrity monitoring (RAIM) algorithm detects faults in receiver terminals (measurement domain), but it is difficult to detect tiny pseudo-range biases caused by distorted signals in the baseband domain. This study proposed a baseband domain parameter assisted RAIM algorithm to solve the limitations of traditional RAIM. Firstly, a baseband domain faults detection and exclusion (BDDE) method is constructed, which integrates baseband domain monitoring parameters such as the squared distance of the sample set vectors, carrier-to-noise ratio, and position-velocity-time solution time for detecting the two types of distorted signals, MP and EWF. Secondly, the fault exclusion weights of the measurement domain and baseband domain modules are reasonably assigned by designing the weight factors of the fusion of BDDE and RAIM. The simulation and real experiment results show that the BDDE method is able to detect the occurrence time and duration of BeiDou B1I distorted signals in the baseband domain. Compared with the RAIM and the extended Kalman filter based RAIM algorithm, simulation experiments show that the position accuracy of BDDE assisted RAIM algorithm can be improved by 16.33% and 8.48%, respectively, and real experimental results in a MP environment show that the position accuracy of BDDE assisted RAIM algorithm is improved by 36.48% and 20.35%, respectively.
- 11 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-13
High-Precision UWB TDOA Localization Algorithm Based on UKF-FNN-CHAN-RIC
Ultrawideband (UWB) technology has garnered significant attention due to its extensive applications in indoor positioning. However, its performance is susceptible to interference from environmental factors. In response to the positioning accuracy issues in time difference of arrival (TDOA) scenarios, this article proposes an integrated TDOA-UKF-FNN-Chan-RIC algorithm that incorporates the unscented Kalman filter (UKF), feedforward neural networks (FNNs), Chan’s algorithm, and redundant information correction (RIC) to effectively enhance the positioning accuracy and robustness of UWB systems. Initially, by investigating the redundant information within the UWB solution model in TDOA scenarios, the inter-relationship between redundant information and measurement vectors is revealed. Subsequently, a gradient descent error correction algorithm for redundant information suitable for TDOA scenarios is proposed, and UKF and FNN transformations are combined to ensure that the data meet the preconditions for algorithmic application. To address the stability issues of positioning algorithms based on implicit function solutions in TDOA scenarios, Chan’s algorithm is employed to convert range difference measurements into range measurements, thereby enhancing computational robustness. Ultimately, the TDOA-UKF-FNN-Chan-RIC algorithm is proposed, and its effectiveness is validated through simulation and practical experiments. The experimental results demonstrate that this algorithm significantly improves positioning accuracy and robustness, achieving millimeter-level fixed-point accuracy and centimeter-level track accuracy in practical experiments.
- 11 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-13
High-Precision UWB TDOA Localization Algorithm Based on UKF-FNN-CHAN-RIC
Ultrawideband (UWB) technology has garnered significant attention due to its extensive applications in indoor positioning. However, its performance is susceptible to interference from environmental factors. In response to the positioning accuracy issues in time difference of arrival (TDOA) scenarios, this article proposes an integrated TDOA-UKF-FNN-Chan-RIC algorithm that incorporates the unscented Kalman filter (UKF), feedforward neural networks (FNNs), Chan’s algorithm, and redundant information correction (RIC) to effectively enhance the positioning accuracy and robustness of UWB systems. Initially, by investigating the redundant information within the UWB solution model in TDOA scenarios, the inter-relationship between redundant information and measurement vectors is revealed. Subsequently, a gradient descent error correction algorithm for redundant information suitable for TDOA scenarios is proposed, and UKF and FNN transformations are combined to ensure that the data meet the preconditions for algorithmic application. To address the stability issues of positioning algorithms based on implicit function solutions in TDOA scenarios, Chan’s algorithm is employed to convert range difference measurements into range measurements, thereby enhancing computational robustness. Ultimately, the TDOA-UKF-FNN-Chan-RIC algorithm is proposed, and its effectiveness is validated through simulation and practical experiments. The experimental results demonstrate that this algorithm significantly improves positioning accuracy and robustness, achieving millimeter-level fixed-point accuracy and centimeter-level track accuracy in practical experiments.
- 14 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (23) , 39659-39668
A Low-Cost UAV Swarm Relative Positioning Architecture Based on BDS/Barometer/UWB
The issue of relative positioning in Unmanned Aerial Vehicle (UAV) swarms is critical for effective cooperative management and network construction. However, current low-cost BeiDou System (BDS) exhibit poor accuracy, typically ranging from several meters to tens of meters, which fails to meet the basic requirements for cooperative positioning. To address this challenge, a combined positioning architecture based on BDS, Barometer, and Ultra-Wideband (UWB), alongside an accuracy optimization algorithm using gradient descent, is proposed. Firstly, existing UAV swarm positioning technologies and algorithms are analyzed. By combining data from BDS, barometer, and UWB sensors, the accuracy problem of the combined system was transformed into an optimization problem. Then, models such as data credibility evaluation, information difference calculation, and gradient descent optimization were used to solve the optimization problem. Finally, a precision optimized BDS/Barometer/UWB combined positioning architecture is proposed. Simulations and real-world experiments demonstrate that the fusion positioning architecture achieves higher cooperative positioning accuracy compared to mainstream systems such as Inertial Navigation System (INS) and BDS. The final distance Root Mean Square Error (RMSE) is reduced to 1.313 m, a 69.0% improvement over the 4.231 m observed with standalone BDS.
- 14 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (23) , 39659-39668
A Low-Cost UAV Swarm Relative Positioning Architecture Based on BDS/Barometer/UWB
The issue of relative positioning in Unmanned Aerial Vehicle (UAV) swarms is critical for effective cooperative management and network construction. However, current low-cost BeiDou System (BDS) exhibit poor accuracy, typically ranging from several meters to tens of meters, which fails to meet the basic requirements for cooperative positioning. To address this challenge, a combined positioning architecture based on BDS, Barometer, and Ultra-Wideband (UWB), alongside an accuracy optimization algorithm using gradient descent, is proposed. Firstly, existing UAV swarm positioning technologies and algorithms are analyzed. By combining data from BDS, barometer, and UWB sensors, the accuracy problem of the combined system was transformed into an optimization problem. Then, models such as data credibility evaluation, information difference calculation, and gradient descent optimization were used to solve the optimization problem. Finally, a precision optimized BDS/Barometer/UWB combined positioning architecture is proposed. Simulations and real-world experiments demonstrate that the fusion positioning architecture achieves higher cooperative positioning accuracy compared to mainstream systems such as Inertial Navigation System (INS) and BDS. The final distance Root Mean Square Error (RMSE) is reduced to 1.313 m, a 69.0% improvement over the 4.231 m observed with standalone BDS.
- Open Access
- 3 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 79851-79860
Generalized Likelihood Ratio Satellite Navigation Spoofing Detection Algorithm Based on Moving Variance
The vulnerability of Global Navigation Satellite Systems (GNSS) to spoofing limits their widespread use in military security and national economy. Therefore, fast and accurate detection of GNSS spoofing is of great significance. When spoofing cannot be accurately detected in the capture tracking phase, spoofing detection needs to be performed again at the localization solver. In order to detect the spoofing jamming of Global Navigation Satellite System in pseudo-range measurements, a generalized likelihood ratio satellite navigation spoofing detection algorithm based on moving variance is proposed by analyzing the pseudo-ranges cleared by the positioning of global satellite navigation signals. A new data subset is created by calculating the variance of the pseudo-range of different satellites at the same time and moving it forward. The variance is calculated again by this data subset to obtain the moving variance, the generalized likelihood ratio detection model is used to calculate the detection statistics of the pseudo-range movement variance, the detection statistic is then compared to the detection threshold under the condition that the probability of false alarm is 1×10 -7 , so as to realize the spoofing jamming detection of global satellite navigation receiver for pseudo-range. Taking the software receiver as the experimental platform, the effectiveness of the proposed algorithm is verified by comparing it with two other algorithms. The result show that when the number of spoofed satellites is less than 9, the algorithm has a good detection effect. When the false alarm rate is 1×10 -7 , the average prediction accuracy rate is kept above 98 %.
- 3 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 79851-79860
Open AccessGeneralized Likelihood Ratio Satellite Navigation Spoofing Detection Algorithm Based on Moving Variance
The vulnerability of Global Navigation Satellite Systems (GNSS) to spoofing limits their widespread use in military security and national economy. Therefore, fast and accurate detection of GNSS spoofing is of great significance. When spoofing cannot be accurately detected in the capture tracking phase, spoofing detection needs to be performed again at the localization solver. In order to detect the spoofing jamming of Global Navigation Satellite System in pseudo-range measurements, a generalized likelihood ratio satellite navigation spoofing detection algorithm based on moving variance is proposed by analyzing the pseudo-ranges cleared by the positioning of global satellite navigation signals. A new data subset is created by calculating the variance of the pseudo-range of different satellites at the same time and moving it forward. The variance is calculated again by this data subset to obtain the moving variance, the generalized likelihood ratio detection model is used to calculate the detection statistics of the pseudo-range movement variance, the detection statistic is then compared to the detection threshold under the condition that the probability of false alarm is 1×10 -7 , so as to realize the spoofing jamming detection of global satellite navigation receiver for pseudo-range. Taking the software receiver as the experimental platform, the effectiveness of the proposed algorithm is verified by comparing it with two other algorithms. The result show that when the number of spoofed satellites is less than 9, the algorithm has a good detection effect. When the false alarm rate is 1×10 -7 , the average prediction accuracy rate is kept above 98 %.