Yali Shao
Yali Shao has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Dongyan Zhao
IC College, Zhejiang University, Hangzhou, China
4 shared publications - Fang Liu
Beijing Smart-Chip Microelectronics Technology Company Ltd., Beijing 100192, China
4 shared publications - Cong Li
School of Microelectronics, Xidian University
2 shared publications - Fang He
Research and Development Laboratory, Zhejiang Zhaolong Interconnect Technology Company Ltd., Huzhou, China
2 shared publications - Fangmin He
Naval University of Engineering
2 shared publications - Fengyu Kuang
School of Microelectronics, Xidian University, Xi’an 710071, China
2 shared publications
Latest Publications
- Open Access
- 26 July 2025
- Published by MDPI AG in Electronics
- Vol. 14 (15) , 2982
Impact of Charge Carrier Trapping at the Ge/Si Interface on Charge Transport in Ge-on-Si Photodetectors
The performance of optoelectronic devices is affected by various noise sources. A notable factor is the 4.2% lattice mismatch at the Ge/Si interface, which significantly influences the efficiency of Ge-on-Si photodetectors. These noise sources can be analyzed by examining the impact of the Ge/Si interface and deep traps on dark and photocurrents. This study evaluates the impact of these charge traps on key photodetector performance metrics, including responsivity, photo-to-dark current ratio, noise equivalent power (NEP), and specific detectivity (D*). The trapping effects on charge transport under both forward and reverse bias conditions are monitored through hysteresis analysis. When illuminated with an unmodulated 1550 nm laser, all the key performance metrics exhibit maximum variations at a specific reverse bias. This critical bias marks the transition from saturated to exponential charge transport regimes, where intensified electric fields enhance trap-assisted recombination and thus maximize metric fluctuations.
- 26 July 2025
- Published by MDPI AG in Electronics
- Vol. 14 (15) , 2982
Open AccessImpact of Charge Carrier Trapping at the Ge/Si Interface on Charge Transport in Ge-on-Si Photodetectors
The performance of optoelectronic devices is affected by various noise sources. A notable factor is the 4.2% lattice mismatch at the Ge/Si interface, which significantly influences the efficiency of Ge-on-Si photodetectors. These noise sources can be analyzed by examining the impact of the Ge/Si interface and deep traps on dark and photocurrents. This study evaluates the impact of these charge traps on key photodetector performance metrics, including responsivity, photo-to-dark current ratio, noise equivalent power (NEP), and specific detectivity (D*). The trapping effects on charge transport under both forward and reverse bias conditions are monitored through hysteresis analysis. When illuminated with an unmodulated 1550 nm laser, all the key performance metrics exhibit maximum variations at a specific reverse bias. This critical bias marks the transition from saturated to exponential charge transport regimes, where intensified electric fields enhance trap-assisted recombination and thus maximize metric fluctuations.
- Open Access
- 30 November 2024
- Published by River Publishers in Applied Computational Electromagnetics Society Journal (ACES)
- p. 970-979
Accelerated Extraction of Parasitic Capacitance in Metal Interconnects using Floating Random Walk Method
This paper presents a novel and efficient approach for the rapid extraction of parasitic capacitance in metal interconnects of large-scale integrated circuit (IC) layouts. By conducting detailed electromagnetic field simulations, we propose a streamlined method that significantly reduces both computational complexity and runtime, making the extraction process more efficient. At the heart of this approach is the use of the floating random walk (FRW) algorithm, which precisely estimates both self-capacitance and mutual capacitance of conductors. A distinguishing feature of this method is the incorporation of error thresholds, which provide a dynamic mechanism to adjust the trade-off between extraction speed and accuracy. This flexibility allows the method to adapt to varying layout complexities while maintaining a high level of precision. Experimental results reveal that, compared to traditional electromagnetic simulation tools such as ANSYS Maxwell, the proposed method achieves up to 120 times faster capacitance extraction, with accuracy deviations containedwithin 20%.
- 30 November 2024
- Published by River Publishers in Applied Computational Electromagnetics Society Journal (ACES)
- p. 970-979
Open AccessAccelerated Extraction of Parasitic Capacitance in Metal Interconnects using Floating Random Walk Method
This paper presents a novel and efficient approach for the rapid extraction of parasitic capacitance in metal interconnects of large-scale integrated circuit (IC) layouts. By conducting detailed electromagnetic field simulations, we propose a streamlined method that significantly reduces both computational complexity and runtime, making the extraction process more efficient. At the heart of this approach is the use of the floating random walk (FRW) algorithm, which precisely estimates both self-capacitance and mutual capacitance of conductors. A distinguishing feature of this method is the incorporation of error thresholds, which provide a dynamic mechanism to adjust the trade-off between extraction speed and accuracy. This flexibility allows the method to adapt to varying layout complexities while maintaining a high level of precision. Experimental results reveal that, compared to traditional electromagnetic simulation tools such as ANSYS Maxwell, the proposed method achieves up to 120 times faster capacitance extraction, with accuracy deviations containedwithin 20%.
- Open Access
- 22 March 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (4) , 424
Leakage and Thermal Reliability Optimization of Stacked Nanosheet Field-Effect Transistors with SiC Layers
In this work, we propose a SiC-NSFET structure that uses a PTS scheme only under the gate, with SiC layers under the source and drain, to improve the leakage current and thermal reliability. Punch-through stopper (PTS) doping is widely used to suppress the leakage current, but aggressively high PTS doping will cause additional band-to-band (BTBT) current. Therefore, the bottom oxide isolation nanosheet field-effect transistor (BOX-NSFET) can further reduce the leakage current and become an alternative to conventional structures with PTS. However, thermal reliability issues, like bias temperature instability (BTI), hot carrier injection (HCI), and time-dependent dielectric breakdown (TDDB), induced by the self-heating effect (SHE) of BOX-NSFET, become more profound due to the lower thermal conductivity of than silicon. Moreover, the bottom oxide will reduce the stress along the channel due to the challenges associated with growing high-quality SiGe material on . Therefore, this method faces difficulties in enhancing the mobility of p-type devices. The comprehensive TCAD simulation results show that SiC-NSFET significantly suppresses the substrate leakage current compared to the conventional structure with PTS. In addition, compared to the BOX-NSFET, the stress reduction caused by the bottom oxide is avoided, and the SHE is mitigated. This work provides significant design guidelines for leakage and thermal reliability optimization of next-generation advanced nodes.- 22 March 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (4) , 424
Open AccessLeakage and Thermal Reliability Optimization of Stacked Nanosheet Field-Effect Transistors with SiC Layers
In this work, we propose a SiC-NSFET structure that uses a PTS scheme only under the gate, with SiC layers under the source and drain, to improve the leakage current and thermal reliability. Punch-through stopper (PTS) doping is widely used to suppress the leakage current, but aggressively high PTS doping will cause additional band-to-band (BTBT) current. Therefore, the bottom oxide isolation nanosheet field-effect transistor (BOX-NSFET) can further reduce the leakage current and become an alternative to conventional structures with PTS. However, thermal reliability issues, like bias temperature instability (BTI), hot carrier injection (HCI), and time-dependent dielectric breakdown (TDDB), induced by the self-heating effect (SHE) of BOX-NSFET, become more profound due to the lower thermal conductivity of than silicon. Moreover, the bottom oxide will reduce the stress along the channel due to the challenges associated with growing high-quality SiGe material on . Therefore, this method faces difficulties in enhancing the mobility of p-type devices. The comprehensive TCAD simulation results show that SiC-NSFET significantly suppresses the substrate leakage current compared to the conventional structure with PTS. In addition, compared to the BOX-NSFET, the stress reduction caused by the bottom oxide is avoided, and the SHE is mitigated. This work provides significant design guidelines for leakage and thermal reliability optimization of next-generation advanced nodes. - Open Access
- 21 March 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (3) , 420
Interaction of Negative Bias Instability and Self-Heating Effect on Threshold Voltage and SRAM (Static Random-Access Memory) Stability of Nanosheet Field-Effect Transistors
In this paper, we investigate the effects of negative bias instability (NBTI) and self-heating effect (SHE) on threshold voltage in NSFETs. To explore accurately the interaction between SHE and NBTI, we established an NBTI simulation framework based on trap microdynamics and considered the influence of the self-heating effect. The results show that NBTI weakens the SHE effect, while SHE exacerbates the NBTI effect. Since the width of the nanosheet in NSFET has a significant control effect on the electric field distribution, we also studied the effect of the width of the nanosheet on the NBTI and self-heating effect. The results show that increasing the width of the nanosheet will reduce the NBTI effect but will enhance the SHE effect. In addition, we extended our research to the SRAM cell circuit, and the results show that the NBTI effect will reduce the static noise margin (SNM) of the SRAM cell, and the NBTI effect affected by self-heating will make the SNM decrease more significantly. In addition, our research results also indicate that increasing the nanosheet width can help slow down the NBTI effect and the negative impact of NBTI on SRAM performance affected by the self-heating effect.
- 21 March 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (3) , 420
Open AccessInteraction of Negative Bias Instability and Self-Heating Effect on Threshold Voltage and SRAM (Static Random-Access Memory) Stability of Nanosheet Field-Effect Transistors
In this paper, we investigate the effects of negative bias instability (NBTI) and self-heating effect (SHE) on threshold voltage in NSFETs. To explore accurately the interaction between SHE and NBTI, we established an NBTI simulation framework based on trap microdynamics and considered the influence of the self-heating effect. The results show that NBTI weakens the SHE effect, while SHE exacerbates the NBTI effect. Since the width of the nanosheet in NSFET has a significant control effect on the electric field distribution, we also studied the effect of the width of the nanosheet on the NBTI and self-heating effect. The results show that increasing the width of the nanosheet will reduce the NBTI effect but will enhance the SHE effect. In addition, we extended our research to the SRAM cell circuit, and the results show that the NBTI effect will reduce the static noise margin (SNM) of the SRAM cell, and the NBTI effect affected by self-heating will make the SNM decrease more significantly. In addition, our research results also indicate that increasing the nanosheet width can help slow down the NBTI effect and the negative impact of NBTI on SRAM performance affected by the self-heating effect.
- 2 September 2023
- Published by Wiley in International Journal of Numerical Modelling: Electronic Networks, Devices and Fields
- Vol. 37 (2)
Crosstalk analysis of twisted bundle of twisted wire pairs (TBTWPs) and star‐quad cables under the effect of inner and outer excitations
In this article, deep neural network (DNN) and chain parameter methods are used to analyze the crosstalk coupling of a star‐quad and a twisted bundle of twisted wire pairs (TBTWP) cables for different excitations, respectively. A DNN is used to extract the per‐unit‐length (p.u.l) resistance, inductance, capacitance, and conductance (RLCG) parameters at any position for the star‐quad and TBTWP cables. The induced common mode (CM) and differential mode (DM) currents due to crosstalk are calculated by combining the obtained RLCG parameters with the chain parameter method. The obtained results show good agreement with that of FEKO software. Moreover, it is found that the star‐quad cable can reduce the external coupling more effectively than that of the TBTWP cable. Finally, measurements are performed to further validate the accuracy of our proposed algorithm.
- 2 September 2023
- Published by Wiley in International Journal of Numerical Modelling: Electronic Networks, Devices and Fields
- Vol. 37 (2)
Crosstalk analysis of twisted bundle of twisted wire pairs (TBTWPs) and star‐quad cables under the effect of inner and outer excitations
In this article, deep neural network (DNN) and chain parameter methods are used to analyze the crosstalk coupling of a star‐quad and a twisted bundle of twisted wire pairs (TBTWP) cables for different excitations, respectively. A DNN is used to extract the per‐unit‐length (p.u.l) resistance, inductance, capacitance, and conductance (RLCG) parameters at any position for the star‐quad and TBTWP cables. The induced common mode (CM) and differential mode (DM) currents due to crosstalk are calculated by combining the obtained RLCG parameters with the chain parameter method. The obtained results show good agreement with that of FEKO software. Moreover, it is found that the star‐quad cable can reduce the external coupling more effectively than that of the TBTWP cable. Finally, measurements are performed to further validate the accuracy of our proposed algorithm.
- 23 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 65 (3) , 689-704
Coupling Analysis of Shielded and Unshielded Star Quad Cables Excited by an Intentional Electromagnetic Pulse
Coupling analysis of shielded and unshielded star quad cables excited by an intentional electromagnetic pulse (IEMP) is investigated using the transmission line theory-based perturbation technique. A detailed modal analysis is presented to obtain the modal per-unit-length parameters of the modal signals in such shielded/unshielded star quad cables. Due to their geometrical balanced structures, with opposite wires used for +leg and −leg to transfer the differential-mode (DM) signal, the external coupling is dramatically suppressed. Moreover, stochastic analyses based on the Monte Carlo simulation are also performed to study the sensitivity of the induced common-mode (CM) and DM currents, due to the deformation effects of the twisting structure of the cable. It is found that the induced CM and DM currents are slightly affected by the twisting deformation of the cable because the interference cancelations do not mainly depend on the twisting loops of the cable. In particular, time domain analysis is performed to study the field-to-wire coupling of the star quad cables exposed to an IEMP, where the worst-case waveform signals in the presence of an IEMP attack are captured and analyzed.
- 23 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 65 (3) , 689-704
Coupling Analysis of Shielded and Unshielded Star Quad Cables Excited by an Intentional Electromagnetic Pulse
Coupling analysis of shielded and unshielded star quad cables excited by an intentional electromagnetic pulse (IEMP) is investigated using the transmission line theory-based perturbation technique. A detailed modal analysis is presented to obtain the modal per-unit-length parameters of the modal signals in such shielded/unshielded star quad cables. Due to their geometrical balanced structures, with opposite wires used for +leg and −leg to transfer the differential-mode (DM) signal, the external coupling is dramatically suppressed. Moreover, stochastic analyses based on the Monte Carlo simulation are also performed to study the sensitivity of the induced common-mode (CM) and DM currents, due to the deformation effects of the twisting structure of the cable. It is found that the induced CM and DM currents are slightly affected by the twisting deformation of the cable because the interference cancelations do not mainly depend on the twisting loops of the cable. In particular, time domain analysis is performed to study the field-to-wire coupling of the star quad cables exposed to an IEMP, where the worst-case waveform signals in the presence of an IEMP attack are captured and analyzed.