CSCristina Mihaela Scheiner

Cristina Mihaela Scheiner

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Cristina Mihaela Scheiner has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Polymeric Protective Films as Anticorrosive Coatings—Environmental Evaluation

    by Alina Ruxandra Caramitu, Romeo Cristian Ciobanu, Magdalena Valentina Lungu, Eduard-Marius Lungulescu, Cristina Mihaela Scheiner, Mihaela Aradoaei, Adriana Mariana Bors, Traian Rus

    The behavior of two polymeric protective paint coatings (epoxy and polyurethane) applied over an epoxy primer coating on steel plates was investigated in this study, focusing on their role in providing anticorrosive protection against various climatic stress factors. Among the numerous climatic factors that can affect the lifetime of anticorrosive coatings, the following were selected for this work: dry heat, UV radiation, humidity, and extreme conditions such as salt fog, marine atmosphere, and alpine atmosphere. The objective was to determine the remaining lifetime of these protective coatings before replacement is needed to prevent damage to the equipment they protect. The behavior of these polymeric materials under the mentioned factors was analyzed based on the variation in the tangent of the dielectric loss angle (tg δ) with frequency. From the interpretation of the experimental results, it was found that the polyurethane paint coating (P2) exhibits superior resistance to climatic degradation compared to the epoxy paint coating (P1). Furthermore, a comparison of tg δ values for the P1 and P2 coatings revealed that the initial (unaged) P2 coating performs better as an insulator (dielectric) than the P1 coating. Comprehensive information is provided to the users of polymeric anticorrosive protection materials, highlighting the extent to which climatic factors can affect the performance of the equipment they protect and determining the appropriate timing for replacing the coatings.


  • Open Access

    Thermoplastic Electromagnetic Shielding Materials from the Integral Recycling of Waste from Electronic Equipment

    by Mihaela Aradoaei, Romeo C. Ciobanu, Cristina Schreiner, Andrei George Ursan, Elena Gabriela Hitruc, Magdalena Aflori

    The European Green Deal’s goals are anticipated to be fulfilled in large part thanks to the New Circular Economy Action Plan. It is believed that recycling materials will have a significant positive impact on the environment, particularly in terms of reducing greenhouse gas emissions and the impacts this will have on preventing climate change. Due to the complexity of the issue and its significant practical ramifications, the activity of Waste Electrical and Electronic Equipment (WEEE) collection networks is a subject of interest for researchers and managers, in accordance with the principles that recent laws have addressed in a large number of industrialized countries. The goal of this paper is to characterize and obtain composite materials using an injection process with a matrix of LDPE, PP, and HDPE, with up to a 10% addition of nonmetallic powders from PCBs and electronic parts from an integrated process of WEEE recycling. The composites present relevant thermal, electrical, and mechanical properties. Such composite materials, due to their relevant dielectric properties, may be further tested for applications in electromagnetic shielding at frequencies above 1 kHz, or for electromagnetic interference/electromagnetic compatibility (EMI/EMC and ESD) applications at lower frequencies due to their superior dielectric loss factor values, associated with relevant behaviors around exploitation temperatures, mainly for the electric, electronic, or automotive industries.


  • Open Access

    Special Packaging Materials from Recycled PET and Metallic Nano-Powders

    by Romeo C. Ciobanu, Mihaela Aradoaei, Alina R. Caramitu, Ioana Ion, Cristina M. Schreiner, Violeta Tsakiris, Virgil Marinescu, Elena Gabriela Hitruc, Magdalena Aflori

    The European methodology for plastics, as a feature of the EU’s circular economy activity plan, ought to support the decrease in plastic waste. The improvement of recycled plastics’ economics and quality is one important part of this action plan. Additionally, achieving the requirement that all plastic packaging sold in the EU by 2030 be recyclable or reusable is an important objective. This means that food packaging materials should be recycled in a closed loop at the end. One of the most significant engineering polymers is polyethylene terephthalate (PET), which is widely used. Due to its numerous crucial qualities, it has a wide variety of applications, from packaging to fibers. The thermoplastic polyolefin, primarily polyethylene and polypropylene (PP), is a popular choice utilized globally in a wide range of applications. In the first phase of the current experiment, the materials were obtained by hot pressing with the press machine. The reinforcer is made of Al nanopowder 800 nm and Fe nanopowder 790 nm and the quality of the recycled polymer was examined using Fourier transform infrared spectroscopy (FTIR), a scanning electron microscope (SEM), and differential scanning calorimetry (DSC). From DSC variation curves as a function of temperature, the values from the transformation processes (glass transition, crystallization, and melting) are obtained. SEM measurements revealed that the polymer composites with Al have smooth spherical particles while the ones with Fe have bigger rough spherical particles.


  • Open Access

    Three-Dimensional Printable Flexible Piezoelectric Composites with Energy Harvesting Features

    by Mihaela Aradoaei, Romeo C. Ciobanu, Cristina Schreiner, Marius Paulet, Alina R. Caramitu, Jana Pintea, Mihaela Baibarac

    The purpose of this work was to obtain an elastic composite material from polymer powders (polyurethane and polypropylene) with the addition of BaTiO3 until 35% with tailored dielectric and piezoelectric features. The filament extruded from the composite material was very elastic but had good features to be used for 3D printing applications. It was technically demonstrated that the 3D thermal deposition of composite filament with 35% BaTiO3 was a convenient process for achieving tailored architectures to be used as devices with functionality as piezoelectric sensors. Finally, the functionality of such 3D printable flexible piezoelectric devices with energy harvesting features was demonstrated, which can be used in various biomedical devices (as wearable electronics or intelligent prosthesis), generating enough energy to make such devices completely autonomous only by exploiting body movements at variable low frequencies.


  • Open Access

    Flexible Electromagnetic Shielding Nano-Composites Based on Silicon and NiFe2O4 Powders

    by Alina R. Caramitu, Romeo C. Ciobanu, Ioana Ion, Cristina M. Schreiner, Mihaela Aradoaei, Violeta Tsakiris, Jana Pintea, Virgil Marinescu

    In this paper, the obtaining and characterization of five experimental models of novel polymer composite materials with ferrite nano-powder are presented. The composites were obtained by mechanically mixing two components and pressing the obtained mixture on a hot plate press. The ferrite powders were obtained by an innovative economic co-precipitation route. The characterization of these composites consisted of physical and thermal properties: hydrostatic density, scanning electron microscopy (SEM), and TG DSC thermal analyses, along with functional electromagnetic tests in order to demonstrate the functionality of these materials as electromagnetic shields (magnetic permeability, dielectric characteristics, and shielding effectiveness). The purpose of this work was to obtain a flexible composite material, applicable to any type of architecture for the electrical and automotive industry, necessary for protection against electromagnetic interference. The results demonstrated the efficiency of such materials at lower frequencies, but also in the microwave domain, with higher thermal stability and lifetime.


  • Open Access

    Simulation of Dielectric Properties of Nanocomposites with Non-Uniform Filler Distribution

    by Romeo C. Ciobanu, Radu F. Damian, Cristina M. Schreiner, Mihaela Aradoaei, Alexandru Sover, Ashok M. Raichur

    Dielectric properties for nanocomposites with metallic fillers inside a polymer matrix were determined using CST STUDIO SUITE—Electromagnetic field simulation software followed by the free-space Nicolson–Ross–Weir procedure. The structure is randomly generated to simulate the intrinsic non-uniformity of real nanomaterials. Cubic insertions were equated to corresponding spherical particles in order to provide either the same volume index or the same exterior surface index. The energy concentration around the inserts and within the entire material was determined as useful information in practice in order to design materials tailored to avoid exceeding the field/temperature limit values. The paper successfully associated the dialectic measurements with the results from the computer simulations, which are mainly based on energetic effects in electromagnetic applications. The experimental results are comparable with the software simulation in terms of precision. The conclusions outline the practical applications of the method for both electromagnetic shielding and microwave domain/telecommunications applications.