Yurui Fan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yurui Fan has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Haomiao Xu
Shanghai Jiao Tong University
11 shared publications - Naiqiang Yan
Shanghai Jiao Tong University
11 shared publications - Zan Qu
Shanghai Jiao Tong University
11 shared publications - Wenjun Huang
Shanghai Jiao Tong University
10 shared publications - Zhisong Liu
Shanghai Jiao Tong University
7 shared publications - Qinyuan Hong
Shanghai Jiao Tong University
6 shared publications
Latest Publications
- 15 October 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (42) , 45775-45787
Functionalized Olefin-Linked Covalent Organic Frameworks for Selective Mercury Capture and Recovery from Vinyl Chloride-Rich Gas Streams
The calcium carbide-derived acetylene hydrochlorination route for vinyl chloride monomer (VCM, C2H3Cl) production remains a major source of mercury consumption and emission owing to its reliance on HgCl2/activated carbon catalysts. Selective removal of elemental mercury (Hg0) from crude VCM streams is intrinsically challenging because Hg0 must be captured from C2H3Cl-rich and HCl-containing atmospheres without coadsorbing valuable C2H3Cl. Here, we report a pore-engineered covalent organic framework (COF) platform in which olefin-linked sp2-carbon-conjugated frameworks suppress nonspecific C2H3Cl adsorption, while Cu-coordinated 2-(methylthio)ethoxy side chains create well-defined Cu–O2S2 pockets for selective Hg0 capture. These structural features afford an ideal adsorbed solution theory-predicted Hg0/C2H3Cl selectivity exceeding 20,000. Notably, dynamic breakthrough experiments under simulated industrial conditions containing 5 vol % HCl further revealed a Hg0 breakthrough time of over 10,000 min g–1 in C2H3Cl-rich streams, with a separation factor of approximately 52, demonstrating exceptional resistance to acid-induced deactivation. Treatment of the spent adsorbent with Na2S solution enables regeneration over 30 consecutive cycles and converts captured mercury into chemically stable HgS. This work establishes a molecularly precise removal–recovery platform for elemental mercury from chemically complex industrial gas streams, highlighting the power of programmed pore microenvironments to discriminate trace toxic species from abundant value-added molecules under chemically aggressive conditions.
- 15 October 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (42) , 45775-45787
Functionalized Olefin-Linked Covalent Organic Frameworks for Selective Mercury Capture and Recovery from Vinyl Chloride-Rich Gas Streams
The calcium carbide-derived acetylene hydrochlorination route for vinyl chloride monomer (VCM, C2H3Cl) production remains a major source of mercury consumption and emission owing to its reliance on HgCl2/activated carbon catalysts. Selective removal of elemental mercury (Hg0) from crude VCM streams is intrinsically challenging because Hg0 must be captured from C2H3Cl-rich and HCl-containing atmospheres without coadsorbing valuable C2H3Cl. Here, we report a pore-engineered covalent organic framework (COF) platform in which olefin-linked sp2-carbon-conjugated frameworks suppress nonspecific C2H3Cl adsorption, while Cu-coordinated 2-(methylthio)ethoxy side chains create well-defined Cu–O2S2 pockets for selective Hg0 capture. These structural features afford an ideal adsorbed solution theory-predicted Hg0/C2H3Cl selectivity exceeding 20,000. Notably, dynamic breakthrough experiments under simulated industrial conditions containing 5 vol % HCl further revealed a Hg0 breakthrough time of over 10,000 min g–1 in C2H3Cl-rich streams, with a separation factor of approximately 52, demonstrating exceptional resistance to acid-induced deactivation. Treatment of the spent adsorbent with Na2S solution enables regeneration over 30 consecutive cycles and converts captured mercury into chemically stable HgS. This work establishes a molecularly precise removal–recovery platform for elemental mercury from chemically complex industrial gas streams, highlighting the power of programmed pore microenvironments to discriminate trace toxic species from abundant value-added molecules under chemically aggressive conditions.
- 21 July 2026
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 60 (30) , 21354-21363
Triggering Low-Temperature Chlorine Activation via Interfacial Ru–O–Mn Coordination Bridges for Robust Waste Incineration Flue Gas Mercury Oxidation
Municipal solid waste incineration (MSWI) is an important anthropogenic source of elemental mercury (Hg0) emissions. In MSWI flue gas treatment, achieving efficient Hg0 oxidation relies on the active participation of HCl under typical downstream operating conditions (<200 °C). However, the activation of HCl remains a formidable challenge at low temperatures. Herein, we rationally design a perovskite oxide catalyst featuring Ru–O–Mn coordinated active sites to promote HCl activation via a low-temperature Deacon-like pathway, enabling efficient in situ Cl* generation for Hg0 oxidation. The optimized catalyst achieves over 99% conversion of Hg0 to Hg2+ at 150 °C. Combined experimental characterization with density functional theory (DFT) calculations demonstrates that Ru incorporation markedly enhances O2 dissociation at the Ru–O–Mn interfacial sites and substantially lowers the energy barrier for HCl dehydrogenation by 0.52 eV, thereby promoting Cl* formation. The generated Cl* species further interact with surface oxygen (O*) to form highly reactive ClOx intermediates, which facilitate HgCl2 formation and significantly improve Hg0 oxidation efficiency. This work provides fundamental insights into low-temperature HCl activation and offers a promising strategy for mercury abatement in incineration flue gas.
- 21 July 2026
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 60 (30) , 21354-21363
Triggering Low-Temperature Chlorine Activation via Interfacial Ru–O–Mn Coordination Bridges for Robust Waste Incineration Flue Gas Mercury Oxidation
Municipal solid waste incineration (MSWI) is an important anthropogenic source of elemental mercury (Hg0) emissions. In MSWI flue gas treatment, achieving efficient Hg0 oxidation relies on the active participation of HCl under typical downstream operating conditions (<200 °C). However, the activation of HCl remains a formidable challenge at low temperatures. Herein, we rationally design a perovskite oxide catalyst featuring Ru–O–Mn coordinated active sites to promote HCl activation via a low-temperature Deacon-like pathway, enabling efficient in situ Cl* generation for Hg0 oxidation. The optimized catalyst achieves over 99% conversion of Hg0 to Hg2+ at 150 °C. Combined experimental characterization with density functional theory (DFT) calculations demonstrates that Ru incorporation markedly enhances O2 dissociation at the Ru–O–Mn interfacial sites and substantially lowers the energy barrier for HCl dehydrogenation by 0.52 eV, thereby promoting Cl* formation. The generated Cl* species further interact with surface oxygen (O*) to form highly reactive ClOx intermediates, which facilitate HgCl2 formation and significantly improve Hg0 oxidation efficiency. This work provides fundamental insights into low-temperature HCl activation and offers a promising strategy for mercury abatement in incineration flue gas.
- 13 November 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 59 (46) , 25103-25112
Speciation Detection Deciphering C 2 H 2 /Cl-Driven Mercury Escape Mechanisms in PVC Production
Mercury emissions from acetylene hydrochlorination processes in polyvinyl chloride (PVC) production pose severe environmental risks yet remain poorly quantified due to methodological limitations in high-reactivity C2H2/HCl atmospheres. We reported an advanced operando mercury speciation platform named PVC-OHM, engineered through systematic optimization of the Ontario Hydro method (OHM), achieving simultaneous real-time detection of elemental mercury (Hg0) and divalent mercury (Hg2+) with unprecedented sensitivity (0.12 μg/m3) under industrially relevant conditions. Our mechanistic investigation reveals three dominant mercury escape pathways: (1) thermal desorption, wherein localized hotspots accelerate HgCl2 decomposition and elevate the saturated vapor pressure at carbon-mercury interface (from 0.9 to 20.3 atm), contributed to 80% of total Hg loss; (2) C2H2 driven reductive decomposition of HgCl2 catalyst at carbon-mercury interfaces, responsible for 65-78% of Hg0 emissions and (3) excess chlorine adsorption-induced desorption ([HgCl2/AC] Cl5, Eads > 0) accounting for >10% of Hg2+ emissions. Quantitative tracking demonstrates alarming mercury loss of per gram catalyst (5 wt % Hg) reached as 3.08 mg Hg0 and 9.01 mg Hg2+, directly linked to localized thermal gradients (ΔT = 250-300 °C) at reaction hotspots. This work establishes the first experimentally validated framework for mercury fate prediction in carbide-based PVC synthesis, providing actionable strategies for emission control through hotspot mitigation and coordination environment optimization.
- 13 November 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 59 (46) , 25103-25112
Speciation Detection Deciphering C 2 H 2 /Cl-Driven Mercury Escape Mechanisms in PVC Production
Mercury emissions from acetylene hydrochlorination processes in polyvinyl chloride (PVC) production pose severe environmental risks yet remain poorly quantified due to methodological limitations in high-reactivity C2H2/HCl atmospheres. We reported an advanced operando mercury speciation platform named PVC-OHM, engineered through systematic optimization of the Ontario Hydro method (OHM), achieving simultaneous real-time detection of elemental mercury (Hg0) and divalent mercury (Hg2+) with unprecedented sensitivity (0.12 μg/m3) under industrially relevant conditions. Our mechanistic investigation reveals three dominant mercury escape pathways: (1) thermal desorption, wherein localized hotspots accelerate HgCl2 decomposition and elevate the saturated vapor pressure at carbon-mercury interface (from 0.9 to 20.3 atm), contributed to 80% of total Hg loss; (2) C2H2 driven reductive decomposition of HgCl2 catalyst at carbon-mercury interfaces, responsible for 65-78% of Hg0 emissions and (3) excess chlorine adsorption-induced desorption ([HgCl2/AC] Cl5, Eads > 0) accounting for >10% of Hg2+ emissions. Quantitative tracking demonstrates alarming mercury loss of per gram catalyst (5 wt % Hg) reached as 3.08 mg Hg0 and 9.01 mg Hg2+, directly linked to localized thermal gradients (ΔT = 250-300 °C) at reaction hotspots. This work establishes the first experimentally validated framework for mercury fate prediction in carbide-based PVC synthesis, providing actionable strategies for emission control through hotspot mitigation and coordination environment optimization.
- 14 July 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 59 (29) , 15504-15514
Stabilizing Ru-Based Catalysts against Bromine Poisoning through Ru–O Covalency Regulation for Durable Brominated Volatile Organic Compound Oxidation
Catalytic oxidation is an effective approach for brominated volatile organic compound (BVOC) abatement to reduce its negative environmental impacts, yet its application is severely hindered by catalyst bromine poisoning. The unique bromine-induced lattice oxygen substitution may constitute a key deactivation pathway in catalytic BVOC degradation, necessitating the stabilization of lattice oxygen as the pivotal challenge. Herein, we report an Sn-mediated Ru-O covalency regulation strategy to stabilize the lattice oxygen of RuO2 against bromine poisoning. The optimized RuSn0.25/TiO2 achieves exceptional stability (>200 h) in dibromomethane oxidation, with -1·h-1, outperforming Ru/TiO2 (∼20% loss). The Ru-O covalency and lattice oxygen stability against bromine poisoning were systematically investigated. Multiple characterizations confirm the weakened Ru-O covalency, while transient CO oxidation reveals suppressed lattice oxygen depletion (5% vs 60% in pristine Ru/TiO2 after bromination). Theoretical calculations reveal that Sn doping lowers the O 2p band center, reducing Ru 4d and O 2p orbital overlap and thus weakening Ru-O covalency. As a result, the lattice oxygen was stabilized and protected from Br substitution due to a higher energy barrier. This study confirms the crucial influence of Ru-O covalency in stabilizing lattice oxygen against bromine poisoning, providing fundamental guidance for environmental catalytic reactions involving lattice oxygen and/or bromine species.
- 14 July 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 59 (29) , 15504-15514
Stabilizing Ru-Based Catalysts against Bromine Poisoning through Ru–O Covalency Regulation for Durable Brominated Volatile Organic Compound Oxidation
Catalytic oxidation is an effective approach for brominated volatile organic compound (BVOC) abatement to reduce its negative environmental impacts, yet its application is severely hindered by catalyst bromine poisoning. The unique bromine-induced lattice oxygen substitution may constitute a key deactivation pathway in catalytic BVOC degradation, necessitating the stabilization of lattice oxygen as the pivotal challenge. Herein, we report an Sn-mediated Ru-O covalency regulation strategy to stabilize the lattice oxygen of RuO2 against bromine poisoning. The optimized RuSn0.25/TiO2 achieves exceptional stability (>200 h) in dibromomethane oxidation, with -1·h-1, outperforming Ru/TiO2 (∼20% loss). The Ru-O covalency and lattice oxygen stability against bromine poisoning were systematically investigated. Multiple characterizations confirm the weakened Ru-O covalency, while transient CO oxidation reveals suppressed lattice oxygen depletion (5% vs 60% in pristine Ru/TiO2 after bromination). Theoretical calculations reveal that Sn doping lowers the O 2p band center, reducing Ru 4d and O 2p orbital overlap and thus weakening Ru-O covalency. As a result, the lattice oxygen was stabilized and protected from Br substitution due to a higher energy barrier. This study confirms the crucial influence of Ru-O covalency in stabilizing lattice oxygen against bromine poisoning, providing fundamental guidance for environmental catalytic reactions involving lattice oxygen and/or bromine species.
- 26 June 2025
- Published by American Chemical Society (ACS) in ACS Nano
Electric-Symmetric-Breaking in Cu Single-Atom Catalysts for Enhanced Acetylene Hydrochlorination
Acetylene hydrochlorination for vinyl chloride monomer (VCM) synthesis represents a vital industrial reaction, where the development of nonmercury catalysts has emerged as a critical research frontier. While metal-nitrogen-carbon (metal-N-C) materials, particularly Cu-N-C catalysts, have shown promise as mercury alternatives, their practical application has been hindered by the inherent limitations of the symmetric D4h electric field in planar Cu-N4 structures, which induces excessive adsorption of *C2H3Cl intermediates and compromises long-term stability. Herein, we present a design strategy through the development of electric-symmetry-broken Cu single-atom catalysts, designated as CuN4-P/C, achieved by the strategic incorporation of phosphorus atoms into the second coordination shell. Comprehensive experimental investigations coupled with density functional theory calculations demonstrate that the engineered asymmetric electric field effectively modulates the electron cloud distribution around the Cu-N bond and downshifts the d-band center, endowing the exceptional coke resistance. This structural innovation dramatically reduces carbon accumulation from 12.1% to a mere 0.28%. Consequently, the prepared catalysts demonstrate a VCM yield (>98.5%) and stability (>400 h, 180 h-1) in pilot-scale trials, surpassing those of previously reported Cu counterparts. Overall, these findings offer a strategy to suppress the deactivation by overadsorption of intermediates on Cu sites during acetylene hydrochlorination.
- 26 June 2025
- Published by American Chemical Society (ACS) in ACS Nano
Electric-Symmetric-Breaking in Cu Single-Atom Catalysts for Enhanced Acetylene Hydrochlorination
Acetylene hydrochlorination for vinyl chloride monomer (VCM) synthesis represents a vital industrial reaction, where the development of nonmercury catalysts has emerged as a critical research frontier. While metal-nitrogen-carbon (metal-N-C) materials, particularly Cu-N-C catalysts, have shown promise as mercury alternatives, their practical application has been hindered by the inherent limitations of the symmetric D4h electric field in planar Cu-N4 structures, which induces excessive adsorption of *C2H3Cl intermediates and compromises long-term stability. Herein, we present a design strategy through the development of electric-symmetry-broken Cu single-atom catalysts, designated as CuN4-P/C, achieved by the strategic incorporation of phosphorus atoms into the second coordination shell. Comprehensive experimental investigations coupled with density functional theory calculations demonstrate that the engineered asymmetric electric field effectively modulates the electron cloud distribution around the Cu-N bond and downshifts the d-band center, endowing the exceptional coke resistance. This structural innovation dramatically reduces carbon accumulation from 12.1% to a mere 0.28%. Consequently, the prepared catalysts demonstrate a VCM yield (>98.5%) and stability (>400 h, 180 h-1) in pilot-scale trials, surpassing those of previously reported Cu counterparts. Overall, these findings offer a strategy to suppress the deactivation by overadsorption of intermediates on Cu sites during acetylene hydrochlorination.
- 26 July 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 18 (31) , 20624-20635
Lattice-Strain Engineering in Ni–Ru Heterostructures for Efficient Acetylene Hydrochlorination toward Vinyl Chloride
Ru-based catalysts have emerged as promising alternatives to HgCl2 in vinyl chloride monomer (VCM) production by acetylene hydrochlorination. However, poor C2H2 activation and the generation of key intermediates (*CH2═CH) have posed grand challenges for enhanced catalytic performances. Herein, we synthesized a Ni-intercalated Ru heterostructure using a lattice-strain engineering strategy, resulting in the desired electronic and chemical environments. The collaboration of Ni splits the adsorption centers of C2H2 and HCl by weakening the strong steric hindrance, and it also promotes the activation of the linear C≡C configurations. The well-controlled lattice strain enables strong d-d hybridization interactions between Ni and Ru, resulting in an upshift of the d-band center from -3.72 eV (for Ru/C) to -3.49 eV and electronic delocalization. This optimized local Ni-Ru/C structure thus enhances *H adsorption while weakening the energy barrier for generating *CH2═CH intermediates. Furthermore, the energy barrier for VCM formation was simultaneously reduced. Accordingly, the Ni-Ru/C heterostructures achieve improved performance in pilot-scale trials, with a conversion of >99.2% and stability for over 500 h. These performances significantly surpass most reported Ru-based moieties and the traditional Hg catalysts, offering a promising avenue for C2H2 activation in industrial applications.
- 26 July 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 18 (31) , 20624-20635
Lattice-Strain Engineering in Ni–Ru Heterostructures for Efficient Acetylene Hydrochlorination toward Vinyl Chloride
Ru-based catalysts have emerged as promising alternatives to HgCl2 in vinyl chloride monomer (VCM) production by acetylene hydrochlorination. However, poor C2H2 activation and the generation of key intermediates (*CH2═CH) have posed grand challenges for enhanced catalytic performances. Herein, we synthesized a Ni-intercalated Ru heterostructure using a lattice-strain engineering strategy, resulting in the desired electronic and chemical environments. The collaboration of Ni splits the adsorption centers of C2H2 and HCl by weakening the strong steric hindrance, and it also promotes the activation of the linear C≡C configurations. The well-controlled lattice strain enables strong d-d hybridization interactions between Ni and Ru, resulting in an upshift of the d-band center from -3.72 eV (for Ru/C) to -3.49 eV and electronic delocalization. This optimized local Ni-Ru/C structure thus enhances *H adsorption while weakening the energy barrier for generating *CH2═CH intermediates. Furthermore, the energy barrier for VCM formation was simultaneously reduced. Accordingly, the Ni-Ru/C heterostructures achieve improved performance in pilot-scale trials, with a conversion of >99.2% and stability for over 500 h. These performances significantly surpass most reported Ru-based moieties and the traditional Hg catalysts, offering a promising avenue for C2H2 activation in industrial applications.
- 7 June 2024
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 58 (24) , 10717-10728
Asymmetric Coordination of Single-Atom Ru Sites Achieves Efficient N(sp3)–H Dehydrogenation Catalysis for Ammonia Oxidation
Ruthenium single-atom catalysts have great potential in ammonia-selective catalytic oxidation (NH3-SCO); however, the stable sp3 hybrid orbital of NH3 molecules makes N(sp3)-H dissociation a challenge for conventional symmetrical metallic oxide catalysts. Herein, we propose a heterogeneous interface reverse atom capture strategy to construct Ru with unique asymmetric Ru1N2O1 coordination. Ru1N2O1/CeO2 exhibits intrinsic low-temperature conversion (T100 at 160 °C) compared to symmetric coordinated Ru-based (280 °C), Ir-based (220 °C), and Pt-based (200 °C) catalysts, and the TOF is 65.4 times that of Ag-based catalysts. The experimental and theoretical studies show that there is a strong d-p orbital interaction between Ru and N atoms, which not only enhances the adsorption of ammonia at the Ru1N2O1 position but also optimizes the electronic configuration of Ru. Furthermore, the affinity of Ru1N2O1/CeO2 to water is significantly weaker than that of conventional catalysts (the binding energy of the Pd3Au1 catalyst is -1.19 eV, but it is -0.39 eV for our material), so it has excellent water resistance. Finally, the N(sp3)-H activation of NH3 requires the assistance of surface reactive oxygen species, but we found that asymmetric Ru1N2O1 can directly activate the N(sp3)-H bond without the involvement of surface reactive oxygen species. This study provides a novel principle for the rational design of the proximal coordination of active sites to achieve its optimal catalytic activity in single-atom catalysis.
- 7 June 2024
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 58 (24) , 10717-10728
Asymmetric Coordination of Single-Atom Ru Sites Achieves Efficient N(sp3)–H Dehydrogenation Catalysis for Ammonia Oxidation
Ruthenium single-atom catalysts have great potential in ammonia-selective catalytic oxidation (NH3-SCO); however, the stable sp3 hybrid orbital of NH3 molecules makes N(sp3)-H dissociation a challenge for conventional symmetrical metallic oxide catalysts. Herein, we propose a heterogeneous interface reverse atom capture strategy to construct Ru with unique asymmetric Ru1N2O1 coordination. Ru1N2O1/CeO2 exhibits intrinsic low-temperature conversion (T100 at 160 °C) compared to symmetric coordinated Ru-based (280 °C), Ir-based (220 °C), and Pt-based (200 °C) catalysts, and the TOF is 65.4 times that of Ag-based catalysts. The experimental and theoretical studies show that there is a strong d-p orbital interaction between Ru and N atoms, which not only enhances the adsorption of ammonia at the Ru1N2O1 position but also optimizes the electronic configuration of Ru. Furthermore, the affinity of Ru1N2O1/CeO2 to water is significantly weaker than that of conventional catalysts (the binding energy of the Pd3Au1 catalyst is -1.19 eV, but it is -0.39 eV for our material), so it has excellent water resistance. Finally, the N(sp3)-H activation of NH3 requires the assistance of surface reactive oxygen species, but we found that asymmetric Ru1N2O1 can directly activate the N(sp3)-H bond without the involvement of surface reactive oxygen species. This study provides a novel principle for the rational design of the proximal coordination of active sites to achieve its optimal catalytic activity in single-atom catalysis.
- 5 December 2023
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 57 (50) , 21272-21283
Cation Concavities Induced d-Band Electronic Modulation on Co/FeOx Nanostructure to Activate Molecular and Interfacial Oxygen for CO Oxidation
Cobalt-based catalysts have been identified for effective CO oxidation, but their activity is limited by molecular O-2 and interfacial oxygen passivation at low temperatures. Optimization of the d-band structure of the cobalt center is an effective method to enhance the dissociation of oxygen species. Here, we developed a novel Co/FeOx catalyst based on selective cationic deposition to anchor Co cations at the defect site of FeOx, which exhibited superior intrinsic low-temperature activity (100%, 115 degrees C) compared to that of Pt/Co3O4 (100%, 140 degrees C) and La/Co2O3 (100%, 150 degrees C). In contrast to catalysts with oxygen defects, the cationic Fe defect in Co/FeOx showed an exceptional ability to accept electrons from the Co 3d orbital, resulting in significant electron delocalization at the Co sites. The Co/FeOx catalyst exhibited a remarkable turnover frequency of 178.6 per Co site per second, which is 2.3 times higher than that of most previously reported Co-based catalysts. The d-band center is shifted upward by electron redistribution effects, which promotes the breaking of the antibonding orbital *pi of the O=O bond. In addition, the controllable regulation of the Fe-O-v-Co oxygen defect sites enlarges the Fe-O bond from 1.97 to 2.02 angstrom to activate the lattice oxygen. Moreover, compared to CoxFe3-xO4, Co/FeOx has a lower energy barrier for CO oxidation, which significantly accelerates the rate-determining step, *COO formation. This study demonstrates the feasibility of modulating the d-band structure to enhance O-2 molecular and interfacial lattice oxygen activation.
- 5 December 2023
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 57 (50) , 21272-21283
Cation Concavities Induced d-Band Electronic Modulation on Co/FeOx Nanostructure to Activate Molecular and Interfacial Oxygen for CO Oxidation
Cobalt-based catalysts have been identified for effective CO oxidation, but their activity is limited by molecular O-2 and interfacial oxygen passivation at low temperatures. Optimization of the d-band structure of the cobalt center is an effective method to enhance the dissociation of oxygen species. Here, we developed a novel Co/FeOx catalyst based on selective cationic deposition to anchor Co cations at the defect site of FeOx, which exhibited superior intrinsic low-temperature activity (100%, 115 degrees C) compared to that of Pt/Co3O4 (100%, 140 degrees C) and La/Co2O3 (100%, 150 degrees C). In contrast to catalysts with oxygen defects, the cationic Fe defect in Co/FeOx showed an exceptional ability to accept electrons from the Co 3d orbital, resulting in significant electron delocalization at the Co sites. The Co/FeOx catalyst exhibited a remarkable turnover frequency of 178.6 per Co site per second, which is 2.3 times higher than that of most previously reported Co-based catalysts. The d-band center is shifted upward by electron redistribution effects, which promotes the breaking of the antibonding orbital *pi of the O=O bond. In addition, the controllable regulation of the Fe-O-v-Co oxygen defect sites enlarges the Fe-O bond from 1.97 to 2.02 angstrom to activate the lattice oxygen. Moreover, compared to CoxFe3-xO4, Co/FeOx has a lower energy barrier for CO oxidation, which significantly accelerates the rate-determining step, *COO formation. This study demonstrates the feasibility of modulating the d-band structure to enhance O-2 molecular and interfacial lattice oxygen activation.
- 22 November 2023
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 57 (48) , 20431-20439
Unveiling the Halogenation-Induced Formation of Hg3Se2X2 (X = Cl, Br, and I) Compounds for Multiphase Mercury Cycling
The interaction between mercury (Hg) and inorganic compounds, including selenium (Se), sulfur (S), and halogens (X = Cl, Br, or I), plays a critical role in the global mercury cycle. However, most previously reported mercury compounds are susceptible to reduction, leading to the release of elemental mercury (Hg0) and causing secondary pollution. In this study, we unveil a groundbreaking discovery that underscores the vital role of halogenation in creating exceptionally stable Hg3Se2X2 compounds. Through the dynamic interplay of Hg, Se, and halogens, an intermediary stage denoted [HgSe]m[HgX2]n emerges, and this transformative process significantly elevates the stabilization of mercury. Remarkably, halogen ions strategically occupy pores at the periphery of HgSe clusters, engendering a more densely packed atomic arrangement of Hg, Se, and halogen components. A marked enhancement in both thermal and acid stability is observed, wherein temperatures ascend from 130 to 300 °C (transitioning from HgSe to Hg3Se2Cl2). This sequence of escalating stability follows the order HgSe < Hg3Se2I2 < Hg3Se2Br2 < Hg3Se2Cl2 for thermal resilience, complemented by virtually absent acid leaching. This innovative compound formation fundamentally alters the transformation pathways of gaseous Hg0 and ionic mercury (Hg2+), resulting in highly efficient in situ removal of both Hg0 and Hg2+ ions. These findings pave the way for groundbreaking advancements in mercury stabilization and environmental remediation strategies, offering a comprehensive solution through the creation of chemically stable precipitates.
- 22 November 2023
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 57 (48) , 20431-20439
Unveiling the Halogenation-Induced Formation of Hg3Se2X2 (X = Cl, Br, and I) Compounds for Multiphase Mercury Cycling
The interaction between mercury (Hg) and inorganic compounds, including selenium (Se), sulfur (S), and halogens (X = Cl, Br, or I), plays a critical role in the global mercury cycle. However, most previously reported mercury compounds are susceptible to reduction, leading to the release of elemental mercury (Hg0) and causing secondary pollution. In this study, we unveil a groundbreaking discovery that underscores the vital role of halogenation in creating exceptionally stable Hg3Se2X2 compounds. Through the dynamic interplay of Hg, Se, and halogens, an intermediary stage denoted [HgSe]m[HgX2]n emerges, and this transformative process significantly elevates the stabilization of mercury. Remarkably, halogen ions strategically occupy pores at the periphery of HgSe clusters, engendering a more densely packed atomic arrangement of Hg, Se, and halogen components. A marked enhancement in both thermal and acid stability is observed, wherein temperatures ascend from 130 to 300 °C (transitioning from HgSe to Hg3Se2Cl2). This sequence of escalating stability follows the order HgSe < Hg3Se2I2 < Hg3Se2Br2 < Hg3Se2Cl2 for thermal resilience, complemented by virtually absent acid leaching. This innovative compound formation fundamentally alters the transformation pathways of gaseous Hg0 and ionic mercury (Hg2+), resulting in highly efficient in situ removal of both Hg0 and Hg2+ ions. These findings pave the way for groundbreaking advancements in mercury stabilization and environmental remediation strategies, offering a comprehensive solution through the creation of chemically stable precipitates.
- 11 May 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (20) , 24701-24712
Metal–Organic Frameworks Encaged Ru Single Atoms for Rapid Acetylene Harvest and Activation in Hydrochlorination
Ruthenium (Ru)-based catalysts have been candidates in hydrochlorination for vinyl chloride monomer (VCM) production, yet they are limited by efficient acetylene (C2H2) utilization. The strong adsorption performance of HCl can deactivate Ru active sites which resulted in weak C2H2 adsorption and slow activation kinetics. Herein, we designed a channel that employed metal-organic framework (MOF)-encaged Ru single atoms to achieve rapid adsorption and activation of C2H2. Low-Ru (∼0.5 wt %) single-atom catalysts (named Ru-NC@MIL) were assembled by hydrogen-bonding nanotraps (the H-C≡C-Hδ+···Oδ- interactions between C2H2 and carboxylate groups/furan rings). Results confirmed that C2H2 could easily enter the encapsulation channels in an optimal mode perpendicular to the channel with a potential energy of 42.3 kJ/mol. The harvested C2H2 molecules can be quickly passed to Ru-N4 active sites for activation by stretching the length of carbon-carbon triple bonds (C≡C) to 1.212 Å. Such a strategy guaranteed >99% C2H2 conversion efficiency and >99% VCM selectivity. Moreover, a stable long-term (>150 h) catalysis with high efficiency (∼0.85 kgvcm/h/kgcat.) and a low deactivation constant (0.001 h-1) was also achieved. This work provides an innovative strategy for precise C2H2 adsorption and activation and guidance for designing multi-functional Ru-based catalysts.
- 11 May 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (20) , 24701-24712
Metal–Organic Frameworks Encaged Ru Single Atoms for Rapid Acetylene Harvest and Activation in Hydrochlorination
Ruthenium (Ru)-based catalysts have been candidates in hydrochlorination for vinyl chloride monomer (VCM) production, yet they are limited by efficient acetylene (C2H2) utilization. The strong adsorption performance of HCl can deactivate Ru active sites which resulted in weak C2H2 adsorption and slow activation kinetics. Herein, we designed a channel that employed metal-organic framework (MOF)-encaged Ru single atoms to achieve rapid adsorption and activation of C2H2. Low-Ru (∼0.5 wt %) single-atom catalysts (named Ru-NC@MIL) were assembled by hydrogen-bonding nanotraps (the H-C≡C-Hδ+···Oδ- interactions between C2H2 and carboxylate groups/furan rings). Results confirmed that C2H2 could easily enter the encapsulation channels in an optimal mode perpendicular to the channel with a potential energy of 42.3 kJ/mol. The harvested C2H2 molecules can be quickly passed to Ru-N4 active sites for activation by stretching the length of carbon-carbon triple bonds (C≡C) to 1.212 Å. Such a strategy guaranteed >99% C2H2 conversion efficiency and >99% VCM selectivity. Moreover, a stable long-term (>150 h) catalysis with high efficiency (∼0.85 kgvcm/h/kgcat.) and a low deactivation constant (0.001 h-1) was also achieved. This work provides an innovative strategy for precise C2H2 adsorption and activation and guidance for designing multi-functional Ru-based catalysts.