QPQikai Peng

Qikai Peng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Qikai Peng has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Performance Assessment of a Diesel Engine Fueled with Biodiesel in a Plateau Environment

    by Guangmeng Zhou, Xumin Zhao, Zhongjie Zhang, Zengyong Liu, Surong Dong, Qikai Peng

    Biodiesel has a higher oxygen content and a higher cetane number, which can compensate for the intake oxygen deficiency in diesel engines in a plateau environment to a certain extent. However, the decreased air density makes biodiesel fuel spray atomization and evaporation more difficult due to its higher density and kinematic viscosity, reducing the quality of the air-fuel mixture. The investigations in this study focus on the effects of biodiesel blending ratios and their coupling with injection timing on diesel engine performances under varying altitude conditions. The results show that as the altitude increases, using a high proportion of biodiesel-blended fuel results in a lower degree of torque reduction. The torque reduction of B100 is 14% lower than that of baseline at an altitude of 4500 m. In addition, when the altitude increases by 2000 m, the optimal fuel injection timing is delayed by 4° CA, regardless of the biodiesel blending ratio. The low-temperature combustion heat release ratio of biodiesel engines slightly increases with the delay of injection time, which is increased with the biodiesel blending ratio. For B100 fuel, increasing the pilot injection quantity under high-altitude conditions helps to improve the heat release rate during the early and late stages of combustion and reduce expansion losses.


  • Open Access

    Study on Through-Flow Characteristics of a Diesel Two-Stage Supercharged Centrifugal Compressor under Variable-Altitude and Multiple Operating Conditions

    by Qikai Peng, Ruilin Liu, Guangmeng Zhou, Xumin Zhao, Surong Dong, Zhongjie Zhang

    Understanding the influence of environmental boundary parameters on the through-flow characteristics of two-stage supercharged centrifugal compressors is the key to maximizing the power recovery potential of diesel engines at high altitudes. In this paper, the influence of the compressor through-flow characteristics on the full-load thermal cycle performance of a diesel engine under variable altitude is studied by means of tests and simulation. The results show that with the increase in altitude, the range of stable work flow decreases, and the pressure ratio of the plugging point changes greatly with altitude. The efficiency of the compressor with the same mass flow point decreases, and the highest efficiency point moves in the direction of the small flow range. With the goal of maximizing the torque of the diesel engine under full load and low speed, the key geometric parameters of the variable-altitude through-flow characteristics of the two-stage supercharged compressor were optimized as follows: at the altitudes of 0 m, 2500 m, and 5500 m, the diesel engine torque increased by 5.89%, 3.78%, and 2.18%, respectively. Based on the optimization method of the compressor through-flow design, a new direction is provided to break through the research on the independent limitation of the diesel engine thermal cycle performance optimization and compressor flow control.


  • Open Access

    Experimental Study on the Flow Characteristics of Two-Stage Variable Turbines in a Twin-VGT System

    by Qikai Peng, Zhongjie Zhang, Guangmeng Zhou, Surong Dong, Xumin Zhao, Han Zhang, Ruilin Liu, Jun Cai

    The twin variable geometry turbocharger (VGT) System, through efficient use of exhaust energy, maximizes internal combustion engine (ICE) power, reduces exhaust emissions and improves reliability. However, the internal flow characteristics of the twin-VGT system are greatly affected by the environment. To ensure that the two-stage adjustable supercharged internal combustion engine is efficient in all geographical environments and under all operating conditions, it is necessary to conduct in-depth research on the internal flow characteristics of high- and low-pressure turbines. In this paper, an experimental system of the flow characteristics of a double variable-geometry turbocharging (twin-VGT) system is designed and developed. A two-stage variable turbine flow characteristic test was carried out, focusing on the relationship between the initial rotational velocity of high variable-geometry turbocharging (HVGT) and blade opening in low variable-geometry turbocharging (LVGT). The effects of high- and low-pressure variable-geometry turbocharger (VGT) blade opening on available exhaust energy, expansion ratio distribution, blade velocity ratio, compressor power consumption and isentropic efficiency were studied. The results show that when the available energy of exhaust gas is constant, with the increase in HVGT turbine speed, when the LVGT blade opening decreases by 10%, the low-pressure turbine expansion ratio increases by about 0.23.


  • Open Access

    Summary of Turbocharging as a Waste Heat Recovery System for a Variable Altitude Internal Combustion Engine

    by Qikai Peng, Ruilin Liu, Guangmeng Zhou, Xumin Zhao, Surong Dong, Zhongjie Zhang, Han Zhang

    The increase in altitude causes the decrease in internal combustion engine power and the increase in pollutant emission. Converting waste heat into more useful forms of energy through the recovery of waste heat from internal combustion engines is the most promising mechanism for improving both of these goals. This paper comprehensively reviews the development and research of waste heat recovery technology of an internal combustion engine in a variable altitude environment. It is found that exhaust gas turbocharging is the most promising waste heat recovery technology to restore high-altitude internal combustion engine power. Turbochargers are affected by low temperature and low pressure at high altitudes, resulting in poor environmental adaptability, inadequate supercharging ratios, and decreased supercharging efficiency. Therefore, it is very important to select the high pressurization system facing the plateau area and its reasonable matching characteristics. The quality of exhaust energy determines how much waste heat a turbine can recover, and only the exergy part of exhaust energy can realize heat/work conversion. The main disadvantage of turbocharging technology applied in the plateau area is that the speed ratio deviates from the design value, leading to the increase of flow loss inside the supercharger. Therefore, optimizing the internal flow field of a high-altitude supercharger is a key problem to improve the efficiency of energy recovery. The conclusion drawn from this Review is that a two-stage turbocharging system will be a key technology to improve the thermal efficiency and reduce the fuel consumption of high-altitude internal combustion engines in the coming decades. In addition, the efficient utilization of the exhaust energy of the two-stage turbine and the influence of the variable compression process of the two-stage compressor on the working medium in the cylinder will be the focus of future research.


  • Combustion and performance characteristics of a diesel engine fueled with coal-based hybrid fuel at various altitudes

    by Surong Dong, Zekun Liu, Ruilin Liu, Guangmen Zhou, Zhongjie Zhang, Qikai Peng

    At high altitude and low pressure, the changes of inlet and exhaust pressure and the combustion environment in the cylinder lead to the deterioration of physicochemical characteristics and combustion in the cylinder of the coal-based mixed fuel. In this research, based on the plateau environment simulation test platform, the combustion characteristics, dynamic performance and fuel economy of the turbocharged diesel engine burned at different simulated altitudes (0 m, 1500 m, 2500 m, 3500 m and 4500 m) were studied. The results revealed that as altitude increased, the coal-based composite fuel caused the diesel engine’s in-cylinder pressure, pressure rise rate, and instantaneous heat release rate to gradually decrease, the flameout period to gradually extend, and the center of gravity of combustion to gradually delay. At low engine speed, the average effective pressure cycle variation rate increased significantly. The coal-based complex fuel diesel engine has increased in-cylinder pressure, torque, and effective thermal efficiency, as well as peak instantaneous heat release rate at high altitude, when compared to diesel combustion. It also causes a reduction in the maximum pressure rise rate, a forward shift in the combustion center of gravity, a reduction in the average effective pressure cycle rate of change, and a shortening of the stall period.