Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Kristaps Siltumens has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Upcycling Textile Waste into Sustainable Acoustic Panels

    by Kristaps Siltumens, Inga Grinfelde

    Textile waste represents a growing environmental challenge, while also offering opportunities for material recovery and the development of higher-value recycled products. This study investigated the potential of post-consumer textile waste for the production of sound-absorbing acoustic panels. Five textile fiber compositions were evaluated: cotton, polyester, wool, linen, and a mixed blend consisting of 50% polyester, 30% cotton, 10% wool, 5% linen, and 5% other fibers. The panels were produced using a biopolymer binder and tested using an AFD 1000 impedance tube. The measurement software generated frequency-resolved sound absorption data from 6.25 to 6393.75 Hz at 6.25 Hz intervals; however, only the validated frequency range of 100–4000 Hz was included in the analysis. Three cylindrical specimens with a diameter of 40 mm were prepared from each material type. Sound absorption coefficients were analyzed across low- (100–250 Hz), mid- (250–1000 Hz), and high-frequency (1000–4000 Hz) ranges, and statistical differences between materials were assessed using one-way ANOVA and Tukey’s HSD post hoc test. The results showed no statistically significant differences between fiber types at low frequencies. In contrast, significant differences were observed in the mid- and high-frequency ranges. Cotton achieved the highest mean absorption coefficient in the mid-frequency range (α = 0.747), while polyester and wool performed best at high frequencies, with mean absorption coefficients of 0.913 and 0.850, respectively. Polyester showed the highest overall acoustic performance across the analyzed frequency range, with a mean absorption coefficient of α = 0.824. These findings demonstrate that post-consumer textile waste can be upcycled into functional acoustic materials, supporting circular economy principles and offering a potential alternative to conventional mineral-based sound absorbers in interior and construction applications.

  • Open Access

    Sound Absorption Coefficient Data for Laboratory-Produced Sound-Absorbing Panels from Textile Waste

    by Kristaps Siltumens, Inga Grinfelde, Raitis Brencis, Andris Paeglitis

    With the increasing demand for sustainable building materials, it has become essential to identify sustainable alternatives to conventional sound absorbers, particularly in the context of waste reduction and the circular economy. The aim of this study was to compile and describe a structured dataset of sound absorption coefficients for laboratory-produced panels made from recycled textile materials. Five types of panels were developed using cotton, polyester, wool, linen, and a mixed composition of textiles. A biopolymer binder was applied to ensure structural stability of the materials. Following careful sorting, shredding, and homogenization of the textile waste, test specimens were prepared and examined under controlled laboratory conditions. The sound absorption coefficients were measured using an AFD 1000 impedance tube in accordance with the ISO 10534-2 standard, across a frequency range from 6.25 to 6393.75 Hz. For each material, three repeated measurements were performed, and mean values were calculated to ensure accuracy and reliability. The resulting dataset contains structured values of sound absorption coefficients, which can be applied in building acoustics modeling, comparative studies with conventional insulation materials, and the development of new sustainable products. In addition, the data can be used in educational contexts and machine learning applications to predict the acoustic properties of recycled textile composites.


  • Open Access

    Dataset of chemical elements concentrations in snow samples collected in Jelgava City (Latvia) in 2021, 2022, 2023

    by Jovita Pilecka-Ulcugaceva, Anda Bakute, Maris Bertins, Arturs Viksna, Sindija Frienberga, Kristaps Siltumens, Inga Grinfelde


  • Open Access

    The landscape footprint of pollution: heavy metals in snow across urban land use types

    by Inga Grīnfelde, Inga Straupe, Kristaps Siltumēns, Oskars Purmalis, Māris Bērtiņš, Jovita Pilecka-Uļčugačeva

    Urban landscapes play a critical role in shaping air and water quality, influencing the distribution of heavy metals and other pollutants. This study investigates the spatial and temporal variations of heavy metal concentrations in urban snow water within Jelgava City, Latvia, over three winter seasons (2017–2019). The study examines the relationships between heavy metal accumulation and urban land use categories, including residential, natural, transport, apartment, public, and industrial zones. Snow samples were analyzed for lead (Pb), nickel (Ni), chromium (Cr), and vanadium (V) using Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES), with statistical analyses performed to determine pollution trends and influencing factors. Results revealed significant spatial and temporal variations in heavy metal concentrations, with Pb exhibiting the highest mean concentration of 7.07 µg/L, followed by Ni (1.93 µg/L), Cr (2.77 µg/L), and V (2.08 µg/L). Maximum recorded values reached 72.26 µg/L for Pb, 40.75 µg/L for Ni, 71.35 µg/L for Cr, and 64.16 µg/L for V, highlighting extreme pollution events. Statistical analysis confirmed significant year-to-year variations for Pb (p = 0.0047), Ni (p = 0.00028), and Cr (p = 0.00030), whereas V remained relatively stable (p = 0.0696), suggesting a continuous pollution source. The study also highlights the influence of urban density on heavy metal accumulation, emphasizing the impact of vehicular emissions, heating systems, and industrial activities. The findings underscore the need for integrated urban planning strategies to mitigate heavy metal pollution and improve environmental quality in urban settings.

  • Open Access

    Experimental Dataset of Greenhouse Gas Emissions from Laboratory Biocover Experiment

    by Kristaps Siltumens, Inga Grinfelde, Juris Burlakovs

    The dataset presented in this manuscript consists of three distinct sets of data collected during a laboratory experiment aimed at quantifying the emissions of greenhouse gases (GHGs), specifically methane (CH4), carbon dioxide (CO2), and nitrous oxide (N2O). The experiment was conducted in three phases, each initiated at different times. The first phase began on 6 June 2022, using a biocover composed of 60% fine-fraction waste, 20% clay soil, and 20% stabilized compost. The second phase commenced on 26 August 2022, with two biocover variants: one composed of 50% fine-fraction waste and 50% clay soil, and the other consisting of 40% fine-fraction waste, 40% clay soil, and 20% shredded paper. The final phase started on 27 October 2022, introducing two biocovers: one containing 25% dried algae, 25% fine-fraction waste, 25% gravel (0–20 mm), and 25% ash, and the other composed of 40% fine-fraction waste, 40% dried algae, and 20% chernozem. Emission assessments were conducted three weeks after the biocover installation to allow for settling and stabilization, followed by weekly measurements two to three days before irrigation with 250 mL of water to simulate field conditions. GHG emission quantification was carried out using the Cavity Ring-Down Spectroscopy gas measurement device, Picarro G2508. This dataset offers substantial scientific value for advancing biocover technologies aimed at reducing GHG emissions in landfill environments, particularly for mitigating methane emissions. In addition to initial experimental use, the dataset offers a wide range of possibilities for reuse, including modeling landfill gas emissions, validating gas flow measurement methods, developing machine learning models, and performing meta-analyses. Its detailed structure facilitates multi-faceted environmental research and supports optimization of landfill management.

  • Open Access

    The role of red clover (Trifolium pratense L.) in mitigating greenhouse gas emissions: Insights from a temperate agricultural ecosystem

    by Kristine Valujeva, Inga Grinfelde, Jovita Pilecka-Ulcugaceva, Olga Skiste, Sindija Frienberga, Kristaps Siltumens, Lidija Vojevoda, Andis Lazdins


  • EFFECTS OF TILLAGE SYSTEMS ON METHANE ASSIMILATION IN CAMBIC CALCISOL AND IMPLICATIONS FOR CLIMATE CHANGE MITIGATION

    by Kristine Valujeva, Jovita Pilecka-Ulcugaceva, Kristaps Siltumens, Olga Skiste, Inga Grinfelde

    Well-aerated soils are essential for methane (CH4) uptake from the atmosphere, acting as significant sinks for this greenhouse gas, which has a global warming potential 25 times greater than that of carbon dioxide (CO2). These soils contain methanotrophic bacteria, which oxidize CH4 and thereby reduce atmospheric methane concentrations. The potential of soils to assimilate CH4 depends on factors such as soil type and moisture regime. This study investigates the ability of clay soil Cambic Calcisol to assimilate CH4. Measurements were conducted at an experimental site with two tillage systems and two crop rotations from 2018 to 2023, with observations taken every two weeks from April to October. Experimental plots under conventional tillage demonstrated a higher rate of CH4 assimilation compared to reduced tillage plots (-4.1 g CH4 ha-1 day-1 and -3.5 g CH4 ha-1 day-1, respectively). CH4 uptake by soils plays a vital role in regulating methane emissions, making soil management practices a key factor in climate change mitigation efforts. Understanding the variables influencing CH4 assimilation is crucial for optimizing land-use strategies to enhance greenhouse gas mitigation.

  • Open Access

    RECYCLING OF TEXTILE WASTE INTO SOUND-ABSORBING ACOUSTIC PLATES

    by Kristaps Siltumens, Inga Grinfelde, Ginters Znots, Rudolfs Golubovs, Raitis Brencis

    The textile waste problem is a significant concern both in Latvia and globally. The textile industry, particularly the fashion industry, is considered one of the most polluting industries, generating a substantial amount of waste. Worldwide, the production of textiles has been on the rise due to population growth and increased consumption, leading to a significant increase in textile waste generation. The management of textile waste is crucial for ensuring sustainability and minimizing environmental impacts. Recycling and reusing textile waste are essential strategies for implementing a circular economy model and reducing the environmental hazards associated with textile production and disposal. One way we can reduce the amount of textile waste in landfills is to create new products from this waste by intercepting it before it ends up in landfills. The aim of this study is to develop sound-absorbing acoustic plates using textile waste. Experiments with textile waste started in January 2024, beginning with the acquisition of textile waste. The textile obtained for the experiment was sourced from the waste management company in Latvia's North Vidzeme, which collects clean textile waste from residents. In the next stages, textile waste was shredded, and slabs were formed using a compactor. Textile processing into a finer fraction was carried out using an industrial shredding machine. A mixture of water-based glue, an isotonic solution (containing boric acid and sodium borate), PVA glue, and sodium bicarbonate was used as a binder for making the plates. The created plates were tested for acoustic properties in the laboratory. The absorption coefficient of the acoustic plate at the best performance level (1250 - 3500 Hz) ranged from 1.14 to 1.6. This is consistent with the fact that non-separated textiles were used.


  • Impacts of biocover composition on greenhouse gas emission

    by Latvia University of Life Sciences and Technologies, Kristaps Siltumens, Inga Grinfelde, Juris Burlakovs, Sindija Liepa, Linda Grinberga

    It is generally estimated that gas, which generates more than half of the greenhouse gas (GHG) emission from waste industries in landfills, is seen as a serious environmental problem worldwide. It is therefore essential to promote management methods to reduce GHG emissions from landfills as well as other sources. One way of achieving this is the usage of different types of biocover applied to them. The aim of this study is to clarify the impact of the biocover created on GHG emissions. An experiment was conducted in laboratory conditions that studied the effectiveness of biocover developed in the laboratory. Three experimental columns with a diameter of 160 mm and a height of 1500 mm were created. Active compost saturated with water at a thickness of 500 mm was used as a source of methane, a permeable layer of sand at a thickness of 300 mm was further formed and finally covered with biocover. Biocover represented 60% of fine-fraction waste, 20% of soil and 20% of compost. The experiment was launched on June 6, 2022, and the first measurements were made two weeks later. All measurements were performed with the CRDS gas measurement device Picarro G2508 (Picarro Inc., USA California). All data analysis was carried out using Descriptive statistics methods. The largest reduction in emissions is projected directly for methane emissions, as biocover technology is appropriate to reduce methane emissions. Other GHG emissions are also expected to be reduced. NH3 emission measurements were also carried out to investigate the impact of the biocover on it. This experiment shows that the biocover created is effective and can be composed of material that has already been served. The experiment is intended to continue to obtain long-term data on the development of biotransformation and to develop more promising approaches in the future to reduce GHG emissions from landfills.


  • Open Access

    Case Study-Based Integrated Assessment of Former Waste Disposal Sites Transformed to Green Space in Terms of Ecosystem Services and Land Assets Recovery

    by Zane Vincevica-Gaile, Juris Burlakovs, Maija Fonteina-Kazeka, Magdalena Wdowin, Emil Hanc, Vita Rudovica, Maris Krievans, Inga Grinfelde, Kristaps Siltumens, Mait Kriipsalu, et al.

    Growing global production leads to continuing generation of waste, part of which still ends its life cycle in landfills and dumps. Despite the efforts of waste reuse and recycling and waste self-degradation, existing and old landfills and dumps remain a huge challenge for the future. The majority of landfills can be identified as non-sanitary and can be designated as existing or former dumps, meaning hills or fields of abandoned garbage and degraded inert waste masses without any or with little aftercare maintenance. In contrast, the term ‘landfill’ refers to legally organized waste disposal sites created in a controlled manner, according to modern environmentally responsible standards. The paper gives a case study-based integrated assessment of closed and revitalized waste disposal sites that have undergone a functional change from ‘lost territories’ to primarily green space beneficial for society and the urban environment, in terms of ecosystem services estimation based on the criteria evaluation approach and monetary assessment of land assets value recovery potential. The chosen four case studies (in the United States, Australia, Poland and Estonia) serve as successful examples of a sustainable degraded site revitalization gateway indicating opportunities for accelerating land value through the prism of ecosystem services estimations and spatial planning criteria. Beneficial value of land assets after site revitalization is assessed in monetary terms.