JWJia Wang

Jia Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jia Wang has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Compact Wideband HTS Duplexer Using Dual‐Mode Resonators with Improved Isolation

    by Jinding Li, Yaoqi Zhou, Wei Xie, Shaoqi Yan, Yang Meng, Xiaoling Zhang, Qingduan Meng, Chi Zhang, Jia Wang, Chunguang Li, et al.

    A wideband high‐temperature superconducting (HTS) duplexer is designed and is characteristic of more than 50% fraction bandwidth in its two channels. The duplexer is composed of a linear half‐wavelength resonator and two channels. Each channel is composed of five dual‐mode resonators with the attenuated second harmonic. To improve the isolation of the duplexer, we loaded a quarter‐wavelength resonator at the output port of Channel 2; besides, a 5‐pole dual‐hairpin lowpass filter is cascaded at the output port of Channel 1 to improve its out‐of‐band rejection. The duplexer was fabricated on a MgO substrate coated with YBCO thin film on its double sides, and the area of the duplexer is 44.42 × 8.00 mm. The measured results showed that the 1 dB bandwidth of the channels is 2.679–4.645 and 5.083–9.014 GHz, respectively; the corresponding fractional bandwidths are 55.7% and 58.1%. The rectangularity of 60/3 dB is 1.51 and 1.11, respectively. The isolation between two channels is larger than 70 dB. The out‐of‐band rejection in the frequency range lower than 15 GHz is larger than 36 dB. The return loss is 10.6 and 6.0 dB and will be improved by subsequent tuning.

  • A High-Temperature Superconducting Triplexer Based on Co-Coupling of Multimode Resonators

    by Yan Shaoqi, Wei Xie, Li Jinding, Long Teng, Xiaoling Zhang, Qingduan Meng, Chi Zhang, Jia Wang, Chunguang Li, Yun Wu, et al.

    This article presents a miniaturized C-band high-temperature superconducting triplexer. The triplexer is composed of multimode resonators and adopts the co-coupling structure to reduce its size. Furthermore, the co-coupling structure voids designing the impedance matching structure of triplexers adopting branch line structures and improves the design efficiency of triplexers. Besides, the isolation of the triplexer has been effectively improved by adjusting the coupling between resonators without increasing its size. The measured results show that the center frequencies of the triplexer are 5.503, 6.002, and 6.500 GHz, with relative bandwidths of 1.113%, 1.155%, and 1.115%, respectively. The insertion losses are 0.53, 0.28, and 0.37 dB, respectively. The isolations between channels are larger than 33.9 dB. The adopted approaches benefit to design miniaturized triplexers with high performance.

  • Open Access

    Fabrication of C-Band High-Temperature Superconducting Microstrip Triplexer with High Accuracy

    by Runbo Jiang, Wei Xie, Shaoqi Yan, Jinding Li, Xiaoling Zhang, Qingduan Meng, Jinhao Dai, Yuefeng Yuan, Chi Zhang, Jia Wang, et al.

    This article presents a miniaturized C-band triplexer fabricated with high-temperature superconducting (HTS) microstrip lines and to be applied to quantum computers. The triplexer consists of three bandpass filters and branch lines. In the design of the bandpass filters, folded step impedance resonators (SIRs) are firstly used to achieve good stopband performances by harmonic suppression. Secondly, cross-coupling structures are also utilized to further improve the passband edge steepness of the bandpass filters. Finally, the parasitic transmission zeros originating from the assembling box sizes are employed to achieve a deeper out-of-band rejection. Three bandpass filters are designed and connected to the common input port of the triplexer. After that, the triplexer is coarsely optimized by advanced design system (ADS) for time-saving and is finely optimized by Sonnet for better accuracy. The optimized layout of the triplexer is fabricated on a 2-inch diameter and 0.5mm thickness MgO wafer; here, the MgO wafer is double-sided coated with HTS YBa2Cu3O7 (YBCO) thin films. The measured passband bandwidths (return loss greater than 12dB) of the triplexer are 6.420-6.680GHz, 6.780-7.030GHz, and 7.110-7.380GHz, respectively, which satisfy the required design specifications.


  • High-Selectivity Lowpass–Bandpass Filters With Flexible Passband Allocation

    by Yuefeng Yuan, Wei Xie, Jinhao Dai, Chi Zhang, Runbo Jiang, Jia Wang, Chunguang Li, Yun Wu, Xu Wang, Liang Sun

    This letter presents a dual-band lowpass–bandpass filter utilizing dual-mode unit cells. The first mode can be tuned without affecting the second mode. The I/O coupled lines for the bandpass response introduce a transmission zero (TZ) to improve the selectivity of the lowpass response. Indeed, the developed improved unit cell provides a frequency ratio ranging from 1 to 4 and a fractional bandwidth of up to 60%. Additionally, a seven-section lowpass–bandpass filter is designed and fabricated, affording a flexible passband allocation, where the lowpass response’s cutoff frequency and roll-off rate are 0.917 GHz and 1055 dB/GHz, respectively. The center frequency and fractional bandwidth of the bandpass response are 1.718 GHz and 13%, respectively, and the filter measures only 0.139 $\lambda _{g} $ $ \times $ 0.046 $\lambda_{g}.$


  • A Broad Stopband and High Rejection HTS Lowpass Filter for Quantum Computers

    by Yuefeng Yuan, Wei Xie, Chunguang Li, Jinhao Dai, Chi Zhang, Jia Wang, Yun Wu, Xu Wang, Liang Sun

    This paper presents a novel approach for extending the upper stopband of lowpass filters. The proposed technique involves dividing the hairpin unit cells' coupled lines into multiple smaller components, which shifts the harmonics to higher frequencies while maintaining the cut-off frequency. Additionally, the stopband is further extended by modifying the tapping position to suppress the second harmonic. For demonstration, an improved dual-hairpin unit cell is devised, which is able to extend the stopband up to 11.3 times the cut-off frequency. Furthermore, a cascaded lowpass filter utilizing multiple improved dual-hairpin unit cells is also designed, which is divided into two sub-filters to suppress enclosure resonance. The cascaded filter is fabricated on an HTS (high-temperature superconducting) thin film deposited on a MgO substrate, demonstrating a cut-off frequency of 483 MHz, extending the stopband to 25.1 GHz (51.9 fc ), affording a rejection level exceeding 60 dB and insertion loss below 0.04 dB. Notably, the roll-off rate exceeds 569 dB/GHz, and the size measures only 0.144 λg × 0.030 λg .


  • Ultrawide Stopband Superconducting Filters With Multiple Harmonics Suppression

    by Yuefeng Yuan, Wei Xie, Jinhao Dai, Chunguang Li, Chi Zhang, Runbo Jiang, Jia Wang, Yun Wu, Xu Wang, Liang Sun

    Multiple harmonics are suppressed by reduced external couplings and a symmetrical layout. The reduced external couplings are implemented by employing dual-hairpin resonators that simultaneously cancel the electric and magnetic fields. The symmetrical layout is utilized to additionally eliminate the spurious modes of substructure resonators. For validation, an eight-order superconducting filter incorporating two groups of stagger-tuned dual-hairpin resonators is designed and fabricated. The filter demonstrates excellent harmonic rejection suppressing six harmonics, extending the stopband to 17.4 f 0 with a rejection of 60 dB, highlighting straightforward synthesis and compact size (0.206 λg × 0.046 λg ) .