Silvan Stettler
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Silvan Stettler has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Luis Guillermo Villanueva
École Polytechnique Fédérale de Lausanne (EPFL)
7 shared publications - Carlos Collado
Department of Signal Theory and Communications, Universitat Politècnica de Catalunya (UPC), Barcelona, Spain
2 shared publications - Edgar Navarro-Gessé
Department of Signal Theory and Communications, Universitat Politècnica de Catalunya (UPC), Barcelona, Spain
2 shared publications Jordi Mateu
Department of Signal Theory and Communications, Universitat Politècnica de Catalunya (UPC), Barcelona, Spain
2 shared publications- Marco Liffredo
Advanced NEMS Laboratory, Swiss Federal Institute of Technology Lausanne (EPFL), Lausanne, Switzerland
2 shared publications - Ana Valenzuela-Pérez
Signal Theory and Communications Department, Universitat Politcnica de Catalunya, Barcelona, Spain
1 shared publication
Latest Publications
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (9) , 7663-7674
Tunable Filter Based on Hybrid Microstrip and 35% Electroacoustic Coupling SH 0 -Wave Resonators
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (9) , 7663-7674
Tunable Filter Based on Hybrid Microstrip and 35% Electroacoustic Coupling SH 0 -Wave Resonators
- Open Access
- 21 July 2026
- Published by Springer Nature in Communications Engineering
- Vol. 5 (1)
A bulk acoustic resonator with vertical electrodes for wideband filters
Radiofrequency front ends for current and next generation (5G and 6G) wireless communication demand acoustic filters that combine wide bandwidth, high power capability, and thermal stability. Existing surface and bulk acoustic wave technologies face inherent trade-offs between electromechanical coupling, lithographic tunability, and robustness. Here, we introduce the bulk acoustic resonator with vertical electrodes (VBAR), a device that combines the advantages of suspended and solidly mounted resonators. VBARs use lithium niobate ridges with sidewall electrodes to excite a shear-horizontal bulk acoustic resonance, providing frequency control through lithography in a configuration that is mechanically anchored to the substrate. Fabricated VBARs exhibit electromechanical coupling coefficients exceeding 30% in the 2–4 GHz range, enabling ladder filters with fractional bandwidths of nearly 20%. While further optimization is necessary to minimize losses, the VBAR concept offers an alternative route toward wideband and robust radiofrequency filters for next-generation wireless systems.
- 21 July 2026
- Published by Springer Nature in Communications Engineering
- Vol. 5 (1)
Open AccessA bulk acoustic resonator with vertical electrodes for wideband filters
Radiofrequency front ends for current and next generation (5G and 6G) wireless communication demand acoustic filters that combine wide bandwidth, high power capability, and thermal stability. Existing surface and bulk acoustic wave technologies face inherent trade-offs between electromechanical coupling, lithographic tunability, and robustness. Here, we introduce the bulk acoustic resonator with vertical electrodes (VBAR), a device that combines the advantages of suspended and solidly mounted resonators. VBARs use lithium niobate ridges with sidewall electrodes to excite a shear-horizontal bulk acoustic resonance, providing frequency control through lithography in a configuration that is mechanically anchored to the substrate. Fabricated VBARs exhibit electromechanical coupling coefficients exceeding 30% in the 2–4 GHz range, enabling ladder filters with fractional bandwidths of nearly 20%. While further optimization is necessary to minimize losses, the VBAR concept offers an alternative route toward wideband and robust radiofrequency filters for next-generation wireless systems.
- Open Access
A bulk acoustic resonator with vertical electrodes for wideband filters
Radiofrequency (RF) front ends for current and next generation (5G and 6G) wireless communication demand acoustic filters that combine wide bandwidth, high power capability, and thermal stability. Existing surface and bulk acoustic wave (SAW and BAW) technologies face inherent trade-offs between electromechanical coupling, lithographic tunability, and robustness. Here we introduce the bulk acoustic resonator with vertical electrodes (VBAR), a device that combines the advantages of suspended and solidly mounted resonators. VBARs use lithium niobate (LiNbO3) ridges with sidewall electrodes to excite a shear-horizontal bulk acoustic resonance, providing frequency control through lithography in a configuration that is mechanically anchored to the substrate. Fabricated VBARs exhibit electromechanical coupling coefficients exceeding 30% in the 2-4 GHz range, enabling ladder filters with fractional bandwidths of nearly 20%. While further optimization is necessary to minimize losses, the VBAR concept offers an alternative route toward wideband and robust RF filters for next-generation wireless systems.
Open AccessA bulk acoustic resonator with vertical electrodes for wideband filters
Radiofrequency (RF) front ends for current and next generation (5G and 6G) wireless communication demand acoustic filters that combine wide bandwidth, high power capability, and thermal stability. Existing surface and bulk acoustic wave (SAW and BAW) technologies face inherent trade-offs between electromechanical coupling, lithographic tunability, and robustness. Here we introduce the bulk acoustic resonator with vertical electrodes (VBAR), a device that combines the advantages of suspended and solidly mounted resonators. VBARs use lithium niobate (LiNbO3) ridges with sidewall electrodes to excite a shear-horizontal bulk acoustic resonance, providing frequency control through lithography in a configuration that is mechanically anchored to the substrate. Fabricated VBARs exhibit electromechanical coupling coefficients exceeding 30% in the 2-4 GHz range, enabling ladder filters with fractional bandwidths of nearly 20%. While further optimization is necessary to minimize losses, the VBAR concept offers an alternative route toward wideband and robust RF filters for next-generation wireless systems.
- 1 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (12) , 2333-2336
Rayleigh Wave Suppression in Al 0.6 Sc 0.4 N-on-SiC Resonators
- 1 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (12) , 2333-2336
Rayleigh Wave Suppression in Al 0.6 Sc 0.4 N-on-SiC Resonators
- Open Access
- 1 July 2025
- Published by Springer Nature in Microsystems & Nanoengineering
- Vol. 11 (1) , 1-9
Suspended lithium niobate acoustic resonators with Damascene electrodes for radiofrequency filtering
Data rates and volume for mobile communication are ever-increasing with the growing number of users and connected devices. With the deployment of 5G and 6G on the horizon, wireless communication is advancing to higher frequencies and larger bandwidths enabling higher speeds and throughput. Current micro-acoustic resonator technology, a key component in radiofrequency front-end filters, is struggling to keep pace with these developments. This work presents an acoustic resonator architecture enabling multi-frequency, low-loss, and wideband filtering for the 5G and future 6G bands located above 3 GHz. Thanks to the exceptional performance of these resonators, filters for the 5G n77 and n79 bands are demonstrated, exhibiting fractional bandwidths of 25% and 13%, respectively, with low insertion loss of around 1 dB. With its unique frequency scalability and wideband capabilities, the reported architecture offers a promising option for filtering and multiplexing in future mobile devices.
- 1 July 2025
- Published by Springer Nature in Microsystems & Nanoengineering
- Vol. 11 (1) , 1-9
Open AccessSuspended lithium niobate acoustic resonators with Damascene electrodes for radiofrequency filtering
Data rates and volume for mobile communication are ever-increasing with the growing number of users and connected devices. With the deployment of 5G and 6G on the horizon, wireless communication is advancing to higher frequencies and larger bandwidths enabling higher speeds and throughput. Current micro-acoustic resonator technology, a key component in radiofrequency front-end filters, is struggling to keep pace with these developments. This work presents an acoustic resonator architecture enabling multi-frequency, low-loss, and wideband filtering for the 5G and future 6G bands located above 3 GHz. Thanks to the exceptional performance of these resonators, filters for the 5G n77 and n79 bands are demonstrated, exhibiting fractional bandwidths of 25% and 13%, respectively, with low insertion loss of around 1 dB. With its unique frequency scalability and wideband capabilities, the reported architecture offers a promising option for filtering and multiplexing in future mobile devices.
- Open Access
- 15 May 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 42 (4)
Piezoelectric and elastic properties of Al0.60Sc0.40N thin films deposited on patterned metal electrodes
Sc-doped aluminum nitride (AlScN) allows for piezoelectric devices with large electromechanical coupling and the benefits increase with larger Sc doping in the film. However, with a larger Sc concentration, the process window narrows, and it is necessary to fine-tune the deposition parameters to achieve a good film. In this paper, we investigate depositions of highly doped AlScN (40% Sc) on unpatterned and patterned metal layers, to show how it is possible to maintain a good film quality on a metal electrode. We find how high-temperature deposition of the metal improves the AlScN film quality, how the gas mixture allows to reduce defects, and how film quality changes with thickness. We show that extreme care must be taken in the apparently trivial step of photoresist cleaning. Finally, we extract the mechanical, electrical, and piezoelectric properties of our optimized layer from a batch of fabricated resonators, obtaining a 5× improvement of piezoelectric coupling compared to undoped AlN and a 1.5× improvement from 32% doped AlScN.
- 15 May 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 42 (4)
Open AccessPiezoelectric and elastic properties of Al0.60Sc0.40N thin films deposited on patterned metal electrodes
Sc-doped aluminum nitride (AlScN) allows for piezoelectric devices with large electromechanical coupling and the benefits increase with larger Sc doping in the film. However, with a larger Sc concentration, the process window narrows, and it is necessary to fine-tune the deposition parameters to achieve a good film. In this paper, we investigate depositions of highly doped AlScN (40% Sc) on unpatterned and patterned metal layers, to show how it is possible to maintain a good film quality on a metal electrode. We find how high-temperature deposition of the metal improves the AlScN film quality, how the gas mixture allows to reduce defects, and how film quality changes with thickness. We show that extreme care must be taken in the apparently trivial step of photoresist cleaning. Finally, we extract the mechanical, electrical, and piezoelectric properties of our optimized layer from a batch of fabricated resonators, obtaining a 5× improvement of piezoelectric coupling compared to undoped AlN and a 1.5× improvement from 32% doped AlScN.
- 30 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 32 (3) , 279-289
Transversal Spurious Mode Suppression in Ultra-Large-Coupling SH0 Acoustic Resonators on YX36°-Cut Lithium Niobate
This work reports on the design and fabrication of fundamental shear horizontal (SH0) mode acoustic resonators based on a suspended lithium niobate (LNO) film at 1.04 GHz. Due to the large $\bm{e}_{\bm{16}}$ piezoelectric coefficient of YX36 $^{\circ}$ -cut LNO, fabricated devices exhibit ultra-large effective electromechanical coupling ( $\bm{k}_{\bm{eff}}^{\bm{2}})$ as high as 29% with a loaded quality factor of 500 at resonance. Moreover, improved device designs with suppressed spurious mode responses are developed based on analysis of the dispersion relation of the SH0 mode in the suspended film. By adding a low-velocity region at the transducer edge and perforations in the inactive area, a spurious-free response is obtained without any reduction in $\bm{k}_{\bm{eff}}^{\bm{2}}$ . In combination with the ability to tune the resonance frequency lithographically, the demonstrated devices are promising for wide-band or tunable radio frequency (RF) filters. 2023-0008
- 30 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 32 (3) , 279-289
Transversal Spurious Mode Suppression in Ultra-Large-Coupling SH0 Acoustic Resonators on YX36°-Cut Lithium Niobate
This work reports on the design and fabrication of fundamental shear horizontal (SH0) mode acoustic resonators based on a suspended lithium niobate (LNO) film at 1.04 GHz. Due to the large $\bm{e}_{\bm{16}}$ piezoelectric coefficient of YX36 $^{\circ}$ -cut LNO, fabricated devices exhibit ultra-large effective electromechanical coupling ( $\bm{k}_{\bm{eff}}^{\bm{2}})$ as high as 29% with a loaded quality factor of 500 at resonance. Moreover, improved device designs with suppressed spurious mode responses are developed based on analysis of the dispersion relation of the SH0 mode in the suspended film. By adding a low-velocity region at the transducer edge and perforations in the inactive area, a spurious-free response is obtained without any reduction in $\bm{k}_{\bm{eff}}^{\bm{2}}$ . In combination with the ability to tune the resonance frequency lithographically, the demonstrated devices are promising for wide-band or tunable radio frequency (RF) filters. 2023-0008