Alejandro Gomez-Perez
Alejandro Gomez-Perez has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
- Partha Pratim Das
NanoMEGAS SPRL, Rue Èmile Claus 49 bte 9, 1050 Brussels, Belgium
4 shared publications Stavros Nicolopoulos
3 shared publicationsClaire Fourmentin
2 shared publications- Evangelos Grivas
Eulambia Advanced Technologies Ltd., Athens, Greece
2 shared publications - John Halloran2 shared publications
- Simon J. L. Billinge
Columbia University
2 shared publications
Latest Publications
- Open Access
- 14 September 2026
- Published by Elsevier in Acta Materialia
- Vol. 321
Spatially resolved structural correlations at the nanoscale in phase-separated silicate glass revealed by electron total scattering analysis using 4D-STEM
- 14 September 2026
- Published by Elsevier in Acta Materialia
- Vol. 321
Open AccessSpatially resolved structural correlations at the nanoscale in phase-separated silicate glass revealed by electron total scattering analysis using 4D-STEM
- Open Access
- 24 June 2026
- Published by Elsevier in SSRN Electronic Journal
Spatially Resolved Structural Correlations at the nanoscale in Phase-Separated Silicate Glass Revealed by Electron Total Scattering Analysis using 4D-STEM
Understanding nanoscale structural heterogeneity in silicate glasses remains challenging because conventional diffraction techniques provide only spatially averaged information. In this work, we combine local Selected-Area Electron Diffraction (SAED) and 4D Scanning Transmission Electron Microscopy (4D-STEM) to resolve structural variations at the nanometer scale in a phase-separated silicate glass. Data processing was carried out using ePDFMapping software for electron pair distribution function (ePDF) analysis. SAED measurements reveal two distinct amorphous environments: silica-rich droplets, characterized by enhanced Si–O and O–O correlations and a first sharp diffraction peak (FSDP) shifted to lower Q values, and a modifier-rich matrix showing weaker medium-range order and clear Si–Na/Ca contributions. 4D-STEM total-scattering analysis enables spatially resolved structural mapping through Pearson correlation analysis to both reciprocal space S(Q) and real-space G(r) functions across the droplet–matrix microstructure. The resulting maps reveal two structurally coherent domains consistent with the chemical partitioning and confirm that each phase possesses a distinct short- and medium-range order. Importantly, the structural parameters extracted from 4D-STEM measurements remain consistent with those obtained from SAED, validating the reliability of spatially resolved ePDF analysis. Preliminary analysis across droplet–matrix interfaces suggest an apparent progressive evolution of the FSDP position. However, due to the finite spatial resolution of the measurement and possible convolution effects, this behavior cannot be unambiguously attributed to a genuine interfacial structural transition. Although the precise structural width of the interface cannot be quantified at this stage, these results highlight the potential of 4D-STEM total scattering analysis to reveal nanoscale structural heterogeneity in amorphous materials.
- 24 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessSpatially Resolved Structural Correlations at the nanoscale in Phase-Separated Silicate Glass Revealed by Electron Total Scattering Analysis using 4D-STEM
Understanding nanoscale structural heterogeneity in silicate glasses remains challenging because conventional diffraction techniques provide only spatially averaged information. In this work, we combine local Selected-Area Electron Diffraction (SAED) and 4D Scanning Transmission Electron Microscopy (4D-STEM) to resolve structural variations at the nanometer scale in a phase-separated silicate glass. Data processing was carried out using ePDFMapping software for electron pair distribution function (ePDF) analysis. SAED measurements reveal two distinct amorphous environments: silica-rich droplets, characterized by enhanced Si–O and O–O correlations and a first sharp diffraction peak (FSDP) shifted to lower Q values, and a modifier-rich matrix showing weaker medium-range order and clear Si–Na/Ca contributions. 4D-STEM total-scattering analysis enables spatially resolved structural mapping through Pearson correlation analysis to both reciprocal space S(Q) and real-space G(r) functions across the droplet–matrix microstructure. The resulting maps reveal two structurally coherent domains consistent with the chemical partitioning and confirm that each phase possesses a distinct short- and medium-range order. Importantly, the structural parameters extracted from 4D-STEM measurements remain consistent with those obtained from SAED, validating the reliability of spatially resolved ePDF analysis. Preliminary analysis across droplet–matrix interfaces suggest an apparent progressive evolution of the FSDP position. However, due to the finite spatial resolution of the measurement and possible convolution effects, this behavior cannot be unambiguously attributed to a genuine interfacial structural transition. Although the precise structural width of the interface cannot be quantified at this stage, these results highlight the potential of 4D-STEM total scattering analysis to reveal nanoscale structural heterogeneity in amorphous materials.
- Open Access
- 16 October 2024
- Published by Elsevier in Acta Materialia
- Vol. 282
Room temperature electron beam sensitive viscoplastic response of ultra-ductile amorphous olivine films
- 16 October 2024
- Published by Elsevier in Acta Materialia
- Vol. 282
Open AccessRoom temperature electron beam sensitive viscoplastic response of ultra-ductile amorphous olivine films
- Open Access
- 30 July 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-13
Quantitative 3D structural analysis of small colloidal assemblies under native conditions by liquid-cell fast electron tomography
Electron tomography has become a commonly used tool to investigate the three-dimensional (3D) structure of nanomaterials, including colloidal nanoparticle assemblies. However, electron microscopy is typically done under high-vacuum conditions, requiring sample preparation for assemblies obtained by wet colloid chemistry methods. This involves solvent evaporation and deposition on a solid support, which consistently alters the nanoparticle organization. Here, we suggest using electron tomography to study nanoparticle assemblies in their original colloidal liquid environment. To address the challenges related to electron tomography in liquid, we devise a method that combines fast data acquisition in a commercial liquid-cell with a dedicated alignment and reconstruction workflow. We present the advantages of this methodology in accurately characterizing two different systems. 3D reconstructions of assemblies comprising polystyrene-capped Au nanoparticles encapsulated in polymeric shells reveal less compact and more distorted configurations for experiments performed in a liquid medium compared to their dried counterparts. A similar expansion can be observed in quantitative analysis of the surface-to-surface distances of self-assembled Au nanorods in water rather than in a vacuum, in agreement with bulk measurements. This study, therefore, emphasizes the importance of developing high-resolution characterization tools that preserve the native environment of colloidal nanostructures.
- 30 July 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-13
Open AccessQuantitative 3D structural analysis of small colloidal assemblies under native conditions by liquid-cell fast electron tomography
Electron tomography has become a commonly used tool to investigate the three-dimensional (3D) structure of nanomaterials, including colloidal nanoparticle assemblies. However, electron microscopy is typically done under high-vacuum conditions, requiring sample preparation for assemblies obtained by wet colloid chemistry methods. This involves solvent evaporation and deposition on a solid support, which consistently alters the nanoparticle organization. Here, we suggest using electron tomography to study nanoparticle assemblies in their original colloidal liquid environment. To address the challenges related to electron tomography in liquid, we devise a method that combines fast data acquisition in a commercial liquid-cell with a dedicated alignment and reconstruction workflow. We present the advantages of this methodology in accurately characterizing two different systems. 3D reconstructions of assemblies comprising polystyrene-capped Au nanoparticles encapsulated in polymeric shells reveal less compact and more distorted configurations for experiments performed in a liquid medium compared to their dried counterparts. A similar expansion can be observed in quantitative analysis of the surface-to-surface distances of self-assembled Au nanorods in water rather than in a vacuum, in agreement with bulk measurements. This study, therefore, emphasizes the importance of developing high-resolution characterization tools that preserve the native environment of colloidal nanostructures.
- 11 February 2024
- Published by Elsevier in Acta Materialia
- Vol. 268
Diffuse electron scattering reveals kinetic frustration as origin of order in CoCrNi medium entropy alloy
- 11 February 2024
- Published by Elsevier in Acta Materialia
- Vol. 268
Diffuse electron scattering reveals kinetic frustration as origin of order in CoCrNi medium entropy alloy
- Open Access
- 1 March 2023
- Published by Taylor & Francis in International Journal of Nanomedicine
- Vol. ume 18, 1085-1106
In vitro Evaluation of Paliperidone Palmitate Loaded Cubosomes Effective for Nasal-to-Brain Delivery
Introduction: This work aimed to develop chitosan-coated cubosomal nanoparticles intended for nose-to-brain delivery of paliperidone palmitate. They were compared with standard and cationic cubosomal nanoparticles. This comparison relies on numerous classical in vitro tests and powder deposition within a 3D-printed nasal cast. Methods: Cubosomal nanoparticles were prepared by a Bottom-up method followed by a spray drying process. We evaluated their particle size, polydispersity index, zeta-potential, encapsulation efficiency, drug loading, mucoaffinity properties and morphology. The RPMI 2650 cell line was used to assess the cytotoxicity and cellular permeation. An in vitro deposition test within a nasal cast completed these measurements. Results: The selected chitosan-coated cubosomal nanoparticles loaded with paliperidone palmitate had a size of 305.7 ± 22.54 nm, their polydispersity index was 0.166 ± 0.022 and their zeta potential was +42.4 ± 0.2 mV. This formulation had a drug loading of 70% and an encapsulation efficiency of 99.7 ± 0.1%. Its affinity with mucins was characterized by a ΔZP of 20.93 ± 0.31. Its apparent permeability coefficient thought the RPMI 2650 cell line was 3.00E-05 ± 0.24E-05 cm/s. After instillation in a 3D-printed nasal cast, the fraction of the injected powder deposited in the olfactory region reached 51.47 ± 9.30% in the right nostril and 41.20 ± 4.59% in the left nostril, respectively. Conclusion: The chitosan coated cubosomal formulation seems to be the most promising formulation for nose-to-brain delivery. Indeed, it has a high mucoaffinity and a significantly higher apparent permeability coefficient than the two other formulations. Finally, it reaches well the olfactory region. Graphical Abstract:
- 1 March 2023
- Published by Taylor & Francis in International Journal of Nanomedicine
- Vol. ume 18, 1085-1106
Open AccessIn vitro Evaluation of Paliperidone Palmitate Loaded Cubosomes Effective for Nasal-to-Brain Delivery
Introduction: This work aimed to develop chitosan-coated cubosomal nanoparticles intended for nose-to-brain delivery of paliperidone palmitate. They were compared with standard and cationic cubosomal nanoparticles. This comparison relies on numerous classical in vitro tests and powder deposition within a 3D-printed nasal cast. Methods: Cubosomal nanoparticles were prepared by a Bottom-up method followed by a spray drying process. We evaluated their particle size, polydispersity index, zeta-potential, encapsulation efficiency, drug loading, mucoaffinity properties and morphology. The RPMI 2650 cell line was used to assess the cytotoxicity and cellular permeation. An in vitro deposition test within a nasal cast completed these measurements. Results: The selected chitosan-coated cubosomal nanoparticles loaded with paliperidone palmitate had a size of 305.7 ± 22.54 nm, their polydispersity index was 0.166 ± 0.022 and their zeta potential was +42.4 ± 0.2 mV. This formulation had a drug loading of 70% and an encapsulation efficiency of 99.7 ± 0.1%. Its affinity with mucins was characterized by a ΔZP of 20.93 ± 0.31. Its apparent permeability coefficient thought the RPMI 2650 cell line was 3.00E-05 ± 0.24E-05 cm/s. After instillation in a 3D-printed nasal cast, the fraction of the injected powder deposited in the olfactory region reached 51.47 ± 9.30% in the right nostril and 41.20 ± 4.59% in the left nostril, respectively. Conclusion: The chitosan coated cubosomal formulation seems to be the most promising formulation for nose-to-brain delivery. Indeed, it has a high mucoaffinity and a significantly higher apparent permeability coefficient than the two other formulations. Finally, it reaches well the olfactory region. Graphical Abstract:
- Open Access
- 30 July 2020
- Published by Oxford University Press (OUP) in Microscopy and Microanalysis
- Vol. 26 (S2) , 1522
Structural Characterization of Beam Sensitive Pharmaceutical Compounds Using 3D Electron Diffraction-Micro-ED at Low Dose with Pixelated Detectors
- 30 July 2020
- Published by Oxford University Press (OUP) in Microscopy and Microanalysis
- Vol. 26 (S2) , 1522
Open AccessStructural Characterization of Beam Sensitive Pharmaceutical Compounds Using 3D Electron Diffraction-Micro-ED at Low Dose with Pixelated Detectors