NFNikola Fischer

Nikola Fischer

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Nikola Fischer has a total of 36 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Remote Actuation of Concentric Tube Robots Using Torque Cables

    by Dionysios Malas, Carlo Seneci, Ross Henry, Nikola Fisher, Lyndon da Cruz, Wenfeng Xia, Alberto Arezzo, Sebastien Ourselin, Christos Bergeles

  • Open Access

    Toward AI Autonomous Navigation for Mechanical Thrombectomy Using Hierarchical Modular Multi-Agent Reinforcement Learning (HM-MARL)

    by H. Robertshaw, N. Fischer, L. Karstensen, B. Jackson, X. Chen, S. M. Hadi Sadati, C. Bergeles, A. Granados, T. C. Booth

    Mechanical thrombectomy (MT) is typically the optimal treatment for acute ischemic stroke involving large vessel occlusions, but access is limited due to geographic and logistical barriers. Reinforcement learning (RL) shows promise in autonomous endovascular navigation, but generalization across ‘long’ navigation tasks remains challenging. We propose a Hierarchical Modular Multi-Agent Reinforcement Learning (HM-MARL) framework for autonomous two-device navigation in vitro, enabling efficient and generalizable navigation. HM-MARL was developed to autonomously navigate a guide catheter and guidewire from the femoral artery to the internal carotid artery (ICA). A modular multi-agent approach was used to decompose the complex navigation task into specialized subtasks, each trained using Soft Actor-Critic RL. The framework was validated in both in silico and in vitro testbeds to assess generalization and real-world feasibility. In silico, a single-vasculature model achieved 92–100% success rates on individual anatomies, while a multi-vasculature model achieved 56–80% across multiple patient anatomies. In vitro, both HM-MARL models successfully navigated 100% of trials from the femoral artery to the right common carotid artery and 80% to the right ICA but failed on the left-side vessel superhuman challenge due to the anatomy and catheter type used in navigation. This study presents the first demonstration of in vitro autonomous navigation in MT vasculature. While HM-MARL enables generalization across anatomies, the simulation-to-real transition introduces challenges. Future work will refine RL strategies using world models and validate performance on unseen in vitro data, advancing autonomous MT towards clinical translation.


  • Open Access

    A Laryngoscope with Shape Memory Actuation

    by Nikola Fischer, Patty Ho, Christian Marzi, Patrick Schuler, Franziska Mathis-Ullrich

    Endotracheal intubation is a medical procedure to secure a patient’s airways, which can be challenging in emergency situations due to an individual’s anatomy. Intubation blades can benefit from an adjustable design with shape memory alloys. We present a novel blade design with two degrees of freedom, continuously transforming a straight into a curved blade. Our demonstrators reached mean angular deflections up to 16∘ without exceeding outer blade temperatures of 40∘C. Mean forces of almost 24N were applicable. This approach has the potential to reduce the complexity of intubation procedures and increase the success rate, especially in time-critical emergency situations.


  • A Self-Assembling Extendable Tendon-Driven Continuum Robot With Variable Length

    by N. Fischer, M. Becher, L. Höltge, F. Mathis-Ullrich

    Tendon-driven continuum robots offer enhanced dexterity for intricate tasks within confined spaces. Nevertheless, when exclusively relying on remote access points, the entire fixed-length robotic system must be precisely repositioned to insert the robotic structure. Conversely, existing methods incorporating extendability tend to introduce complex design requirements, often resulting in a larger spatial footprint. Here, we present a novel design featuring a self-assembling continuum robotic structure during extension process with variable section- and segment lengths. We investigate a compact actuator unit ( $\text{240} \,\text{mm}\times \text{140} \, \text{mm} \times \text{145} \,\text{mm}$ , $\text{1.5} \,\text{kg}$ ) assembling a robotic structure smaller than $15.4 \,\text{mm}$ in diameter, with a three-tendon configuration and two omnidirectional bendable segments, able to extend up to $240 \,\text{mm}$ . A reliable assembly performance was found with repeatability errors below $2 \,\text{mm}$ during extension, while workspace and dexterity of the continuum robot achieved a median error of $2.39 \,\text{mm}$ for bending. Our scalable approach reaches state-of-the-art dexterity and workspace range, showing great potential to be used for existing and future tendon-driven robotic systems.


  • Open Access

    Investigating Passive Haptic Learning of Piano Songs Using Three Tactile Sensations of Vibration, Stroking and Tapping

    by Likun Fang, Timo Müller, Erik Pescara, Nikola Fischer, Yiran Huang, Michael Beigl

    Passive Haptic Learning (PHL) is a method by which users are able to learn motor skills without paying active attention. In past research, vibration is widely applied in PHL as the signal delivered on the participant's skin. The human somatosensory system provides not only discriminative input (the perception of pressure, vibration, slip, and texture, etc.) to the brain but also an affective input (sliding, tapping and stroking, etc.). The former is often described as being mediated by low-threshold mechanosensitive (LTM) units with rapidly conducting large myelinated (Aᵬ) afferents, while the latter is mediated by a class of LTM afferents called C-tactile afferents (CTs). We investigated whether different tactile sensations (tapping, light stroking, and vibration) influence the learning effect of PHL in this work. We built three wearable systems corresponding to the three sensations respectively. 17 participants were invited to learn to play three different note sequences passively via three different systems. The subjects were then tested on their remembered note sequences after each learning session. Our results indicate that the sensations of tapping or stroking are as effective as the vibration system in passive haptic learning of piano songs, providing viable alternatives to the vibration sensations that have been used so far. We also found that participants on average made up to 1.06 errors less when using affective inputs, namely tapping or stroking. As the first work exploring the differences in multiple types of tactile sensations in PHL, we offer our design to the readers and hope they may employ our works for further research of PHL.


  • Open Access

    A Compliant Actuator-Sensor Unit using a Shape Memory Alloy and Capacitive Force Sensing for Active Exoskeleton Interfaces

    by Nikol Fischer

    Robotic lightweight-exoskeletons show great potential to enhance human motion capabilities for the disabled, elderly, and healthy. Active human-robotic interfaces with integrated actuation and sensing allow high quality measurements and an optimal fit when worn. We present a compact actuator-sensor unit to be embedded in most interfaces that provides a controllable force impact using shape memory alloy strips in a compliant parallel configuration. The sensing of interaction forces through the user’s clothing is enabled using a thin layer based capacitive force sensor. The unit was characterized in a test setup and attached to a subject’s limb. We could demonstrate controllable actuation in the force range of up to 62 N with effective force offsets of 13.7 N from arbitrary contact force requiring less than 10 W. The unit showed reliable sensing, revealing characteristic patterns of basic limb movements. The actuation controls the initial contact forces and enables robust interaction force monitoring and can thereby facilitate further signal processing. For future work, we will miniaturize the unit further and investigate compensation of interface displacements during activities of daily living in a user study.

  • Open Access

    Compact flexible actuator based on a shape memory alloy for shaping surgical instruments

    by Nikola Fischer, Franziska Mathis-Ullrich

    Conventional flexible actuators for minimally invasive interventions come with complex and bulky actuation infrastructure. We present a proof-of-concept study of a compact flexible actuator with variable shape change featuring shape memory alloy wire loops in active-antagonist configurations for a bending and S-shape. The actuator was fabricated using heat-treated wire loops. The evaluation using optical marker tracking revealed a mean maximum absolute displacement at the distal tip of 19 mm and a force of 90 mN reached in under 15 s. For control, a closed-loop regime was evaluated with steady-state errors below 2°.


  • Open Access

    Shape-sensing by self-sensing of shape memory alloy instruments for minimal invasive surgery

    by Nikola Fischer, Johannes Knapp, Franziska Mathis-Ullrich

    Shape memory alloy-based flexible instruments have potential for enhancing the safety in minimally invasive surgery compared to passive rigid devices. We developed a data-driven polynomial model to estimate deflection of a 2D bending actuator using electrical resistance. The model accurately predicts deflections (mean error <3.6 mm), but force sensing augmentation is required for unknown load cases. The model is specific to the tested actuator geometry, and future research should investigate multiple actuators and explore nonlinear modeling approaches.


  • Compliant Hall-Effect Sensor Array for Passive Magnetic Instrument Tracking

    by Nikola Fischer, Joachim Kriechbaum, Daniel Berwanger, Franziska Mathis-Ullrich

    Minimally invasive surgical procedures can strongly benefit from nonvisual magnetic instrument tracking. Most state-of-the-art sensor systems for magnetic tracking, however, are rigid and bulky or depend on multimodal sensor technologies. In this work, we investigate a compliant, wearable 2-D Hall-effect sensor array with self-sensing ability and a minimal spatial footprint. Our tracking algorithm is based on a permanent magnet model and a least squares optimization. For evaluation of self-sensing, we tested the sensor array attached to 3D-printed circular frames with known geometries. Tracking was experimentally evaluated moving the target magnet on a preset path utilizing a robotic actuator. Results show that stronger bending radii lead to larger errors of the shape estimation with an overall absolute error of $8.33^{\circ }$ . However, larger radii eventually lead to a decreased Euclidean distance error in the actual tracking procedure between 1.31 mm and 3.38 mm. Thus, the additional efforts due to shape estimation appear fair, since the overall performance of the tracking improves and the spatial footprint can be minimized with our approach. Future work will address performance improvement and implementation of a machine learning approach, aiming for real-time capability.


  • Open Access

    Biocompatible Soft Material Actuator for Compliant Medical Robots

    by Christian Marzi, Nikola Fischer, Franziska Mathis-Ullrich

    Robots from material-based actuators offer high potential for small-scale robots with abilities hardly achievable by classical methods like electric motors. Besides excellent scaling to minimally invasive systems, allowing for omission of metallic components, such robots can be applied in imaging modalities such as MRI or CT. To allow for higher accessibility in this field of research, a facile method for fabrication of such soft actuators was developed. It comprises only two materials: graphene oxide and silicone elastomer. The facile fabrication method does not require specialized equipment. The resulting actuator is biocompatible and controllable by light mediated heat. The bending motion can be controlled by the intensity of applied infrared light and the actuator was experimentally shown to move five times its own weight. Thus, providing capabilities for a medical soft robotic actuator.