Muhammad Dimas Aditya Ari
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Muhammad Dimas Aditya Ari has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Nike Hendrijantini
Department of Prosthodontic, Faculty of Dental Medicine, Universitas Airlangga, Surabaya, Indonesia
3 shared publications - Abil Kurdi
Department of Prosthodontics, Faculty of Dental Medicine, Universitas Airlangga, Surabaya, Indonesia
2 shared publications - Bambang Agustono
Universitas Airlangga, Indonesia
2 shared publications - Eric Priyo Prasetyo
Department of Conservative Dentistry, Faculty of Dental Medicine, Universitas Airlangga, Surabaya, Indonesia
2 shared publications - Guang Hong
Division for Globalization Initiative, Liaison Center for Innovative Dentistry, Graduate School of Dentistry, Tohoku University, Sendai, Japan
2 shared publications - Harry Laksono
Universitas Airlangga, Surabaya, Indonesia
2 shared publications
Latest Publications
- Open Access
- 2 April 2024
- Published by Universitas Airlangga in Dental Journal (Majalah Kedokteran Gigi)
- Vol. 57 (2) , 91-96
Bone formation and mineralization around the implant in osteoporotic animal models enhanced by mesenchymal stem cells
Background: Poor bone quality, sometimes caused by osteoporosis, can lead to dental implant failure. Human umbilical cord mesenchymal stem cells (hUCMSCs) can differentiate into osteoblasts and offer an alternative therapy for poor bone conditions. Purpose: This study aims to evaluate the effect of hUCMSCs induction on the extent of osseointegration by the new bone formation area of dental implants in osteoporotic animal models. Methods: The samples were divided into two groups, i.e., control and induced hUCMSCs groups at different times. An ovariectomy was performed to assess the osteoporosis condition. The control group was injected using gelatin, and the treatment group was administered hUCMSCs. Terminations were conducted at 2 and 4 weeks, respectively. The collected samples were then subjected to histological examination to analyze new bone formation and its proportion. In addition, alkaline phosphatase staining was also performed to evaluate the mineralization area. The data was analyzed using the one-way analysis of variance (ANOVA). Results: Both for new bone formation area as well as the proportion of new bone, it was observed that the best results were in the group with induction of hUCMSCs at 2 weeks. Alkaline phosphatase staining also confirmed that the highest mineralization was observed in the same group. Conclusion: hUCMSCs induced new bone formation in the implant placement in osteoporotic animal models.
- 2 April 2024
- Published by Universitas Airlangga in Dental Journal (Majalah Kedokteran Gigi)
- Vol. 57 (2) , 91-96
Open AccessBone formation and mineralization around the implant in osteoporotic animal models enhanced by mesenchymal stem cells
Background: Poor bone quality, sometimes caused by osteoporosis, can lead to dental implant failure. Human umbilical cord mesenchymal stem cells (hUCMSCs) can differentiate into osteoblasts and offer an alternative therapy for poor bone conditions. Purpose: This study aims to evaluate the effect of hUCMSCs induction on the extent of osseointegration by the new bone formation area of dental implants in osteoporotic animal models. Methods: The samples were divided into two groups, i.e., control and induced hUCMSCs groups at different times. An ovariectomy was performed to assess the osteoporosis condition. The control group was injected using gelatin, and the treatment group was administered hUCMSCs. Terminations were conducted at 2 and 4 weeks, respectively. The collected samples were then subjected to histological examination to analyze new bone formation and its proportion. In addition, alkaline phosphatase staining was also performed to evaluate the mineralization area. The data was analyzed using the one-way analysis of variance (ANOVA). Results: Both for new bone formation area as well as the proportion of new bone, it was observed that the best results were in the group with induction of hUCMSCs at 2 weeks. Alkaline phosphatase staining also confirmed that the highest mineralization was observed in the same group. Conclusion: hUCMSCs induced new bone formation in the implant placement in osteoporotic animal models.
- 31 October 2023
- Published by A and V Publications in Research Journal of Pharmacy and Technology
- Vol. 16 (10) , 4805-4810
Alveolar Bone Formation Enhancement Induced by The Combination of Propolis Extract and Bovine Bone Graft Through SMAD3 Expression and Woven Bone in The Socket Preservation (An In Vivo Study)
After tooth extraction, preservation of the socket is performed to maintain the alveolar bone dimension. The materials such as Bovine Bone Graft (BBG) are commonly used and in combination with propolis extract, it's hoped can accelerate the bone remodeling so as to increase the success of prosthodontics treatment and improve individual good health and well-being. This study aimed to determine the capability of the combination of propolis extract and BBG in alveolar bone regeneration in terms of SMAD3 expression and the area of woven bone. This study used 84 Cavia cobaya which were divided into 4 groups for the 3rd, 7th, and 30th day, each group consist of 7 subjects. The first mandibular incisor of the subject was extracted then the socket for each group was filled with PEG (K1), propolis extract (K2), BBG (K3), and a combination of propolis extract and BBG (K4). After the duration was reached, the experimental animals were terminated and the specimen were processed to evaluate the expression of SMAD3 and calculate the area of the woven bone. Data were analyzed using Analysis of Variance (ANOVA). All groups expressed SMAD3 and demonstrated the presence of woven bone. The highest expression of SMAD3 and the area of woven bone were found in the K4 group on the 3rd, 7th, and 30th day. There were significant differences in each group (p = 0.00; p <0.05) both on the SMAD3 expression and the area of the woven bone. Propolis extract and BBG combination supports enhancement bone formation by increasing SMAD3 expression and woven bone area.
- 31 October 2023
- Published by A and V Publications in Research Journal of Pharmacy and Technology
- Vol. 16 (10) , 4805-4810
Alveolar Bone Formation Enhancement Induced by The Combination of Propolis Extract and Bovine Bone Graft Through SMAD3 Expression and Woven Bone in The Socket Preservation (An In Vivo Study)
After tooth extraction, preservation of the socket is performed to maintain the alveolar bone dimension. The materials such as Bovine Bone Graft (BBG) are commonly used and in combination with propolis extract, it's hoped can accelerate the bone remodeling so as to increase the success of prosthodontics treatment and improve individual good health and well-being. This study aimed to determine the capability of the combination of propolis extract and BBG in alveolar bone regeneration in terms of SMAD3 expression and the area of woven bone. This study used 84 Cavia cobaya which were divided into 4 groups for the 3rd, 7th, and 30th day, each group consist of 7 subjects. The first mandibular incisor of the subject was extracted then the socket for each group was filled with PEG (K1), propolis extract (K2), BBG (K3), and a combination of propolis extract and BBG (K4). After the duration was reached, the experimental animals were terminated and the specimen were processed to evaluate the expression of SMAD3 and calculate the area of the woven bone. Data were analyzed using Analysis of Variance (ANOVA). All groups expressed SMAD3 and demonstrated the presence of woven bone. The highest expression of SMAD3 and the area of woven bone were found in the K4 group on the 3rd, 7th, and 30th day. There were significant differences in each group (p = 0.00; p <0.05) both on the SMAD3 expression and the area of the woven bone. Propolis extract and BBG combination supports enhancement bone formation by increasing SMAD3 expression and woven bone area.
- Open Access
- 1 January 2023
- Published by FapUNIFESP (SciELO) in Journal of Applied Oral Science
- Vol. 31, e20220375
Human umbilical cord mesenchymal stem cells accelerate and increase implant osseointegration in diabetic rats
This study was conducted to assess the effect of hUCMSCs injection on the osseointegration of dental implant in diabetic rats via Runt-related Transcription Factor 2 (Runx2), Osterix (Osx), osteoblasts, and Bone Implant Contact (BIC). The research design was a true experimental design using Rattus norvegicus Wistar strain. Rattus norvegicus were injected with streptozotocin to induce experimental diabetes mellitus. The right femur was drilled and loaded with titanium implant. Approximately 1 mm from proximal and distal implant site were injected with hUCMSCs. The control group was given only gelatin solvent injection. After 2 and 4 weeks of observation, the rats were sacrificed for further examination around implant site using immunohistochemistry staining (RUNX2 and Osterix expression), hematoxylin eosin staining, and bone implant contact area. Data analysis was done using ANOVA test. Data indicated a significant difference in Runx2 expression (p<0.001), osteoblasts (p<0.009), BIC value (p<0.000), and Osterix expression (p<0.002). In vivo injection of hUCMSCs successfully increased Runx2, osteoblasts, and BIC value significantly, while decreased Osterix expression, indicating an acceleration of the bone maturation process. The results proved hUCMSCs to accelerate and enhance implant osseointegration in diabetic rat models.
- 1 January 2023
- Published by FapUNIFESP (SciELO) in Journal of Applied Oral Science
- Vol. 31, e20220375
Open AccessHuman umbilical cord mesenchymal stem cells accelerate and increase implant osseointegration in diabetic rats
This study was conducted to assess the effect of hUCMSCs injection on the osseointegration of dental implant in diabetic rats via Runt-related Transcription Factor 2 (Runx2), Osterix (Osx), osteoblasts, and Bone Implant Contact (BIC). The research design was a true experimental design using Rattus norvegicus Wistar strain. Rattus norvegicus were injected with streptozotocin to induce experimental diabetes mellitus. The right femur was drilled and loaded with titanium implant. Approximately 1 mm from proximal and distal implant site were injected with hUCMSCs. The control group was given only gelatin solvent injection. After 2 and 4 weeks of observation, the rats were sacrificed for further examination around implant site using immunohistochemistry staining (RUNX2 and Osterix expression), hematoxylin eosin staining, and bone implant contact area. Data analysis was done using ANOVA test. Data indicated a significant difference in Runx2 expression (p<0.001), osteoblasts (p<0.009), BIC value (p<0.000), and Osterix expression (p<0.002). In vivo injection of hUCMSCs successfully increased Runx2, osteoblasts, and BIC value significantly, while decreased Osterix expression, indicating an acceleration of the bone maturation process. The results proved hUCMSCs to accelerate and enhance implant osseointegration in diabetic rat models.
- Open Access
- 1 September 2022
- Published by Universitas Airlangga in Dental Journal (Majalah Kedokteran Gigi)
- Vol. 55 (3) , 179-185
Management of a complete denture in the flat mandibular ridge using a semi-adjustable articulator along with an effective suction method
Background: Complete dentures can improve the quality of life of edentulous patients. The selection of a suitable articulator and an impression technique is important to construct a stable and retentive complete denture with good occlusion. The use of a semiadjustable articulator ensures that the dentures can be constructed such that their movement closely resembles the patient’s physiological movements. The effective suction method can ensure the development of the border seal according to the patient’s anatomical condition. The use of a semi-adjustable articulator along with an effective suction method is expected to provide good results in the construction of a complete denture. Purpose: This report aimed to describe the management of individual complete dentures in the flat mandibular ridge using a semi-adjustable articulator along with an effective suction method. Case: A 69-year-old female patient came with a chief complaint of her old dentures being unusable and wanted new dentures made. The patient’s general condition was good, and the last extraction was done three months prior to the patient’s arrival. The mandibular posterior alveolar ridge showed dextral tapering and sinistral flatness. Case Management: A complete denture with an acrylic base was fabricated using a semi-adjustable articulator along with an effective suction method. Conclusion: Flat ridge case management using a semi-adjustable articulator with an effective suction method can improve complete denture retention and stability.
- 1 September 2022
- Published by Universitas Airlangga in Dental Journal (Majalah Kedokteran Gigi)
- Vol. 55 (3) , 179-185
Open AccessManagement of a complete denture in the flat mandibular ridge using a semi-adjustable articulator along with an effective suction method
Background: Complete dentures can improve the quality of life of edentulous patients. The selection of a suitable articulator and an impression technique is important to construct a stable and retentive complete denture with good occlusion. The use of a semiadjustable articulator ensures that the dentures can be constructed such that their movement closely resembles the patient’s physiological movements. The effective suction method can ensure the development of the border seal according to the patient’s anatomical condition. The use of a semi-adjustable articulator along with an effective suction method is expected to provide good results in the construction of a complete denture. Purpose: This report aimed to describe the management of individual complete dentures in the flat mandibular ridge using a semi-adjustable articulator along with an effective suction method. Case: A 69-year-old female patient came with a chief complaint of her old dentures being unusable and wanted new dentures made. The patient’s general condition was good, and the last extraction was done three months prior to the patient’s arrival. The mandibular posterior alveolar ridge showed dextral tapering and sinistral flatness. Case Management: A complete denture with an acrylic base was fabricated using a semi-adjustable articulator along with an effective suction method. Conclusion: Flat ridge case management using a semi-adjustable articulator with an effective suction method can improve complete denture retention and stability.
- Open Access
- 24 November 2021
- Published by University of the Philippines Manila in Acta Medica Philippina
- Vol. 55 (8)
Maxillary Occlusion Rehabilitation of Multiple Anterior Teeth Agenesis Followed by Tooth Wear: A Case Report
A 19-year-old female patient came with the chief complaint that the upper anterior teeth looked small and with many spaces. The patient claimed that the tooth had never been replaced since birth. The patient wanted to improve the aesthetics of the tooth. Treatment, in this case, was made using a fixed prosthetic to aesthetically rehabilitate through prosthodontic treatment in the anterior teeth agenesis followed by attrition. It can be concluded that fixed prosthodontic treatment using a splint bridge is one treatment option that can be used in multiple anterior teeth agenesis followed by tooth wear. An appropriate material selection increases the aesthetics and functional aspects of the final treatment.
- 24 November 2021
- Published by University of the Philippines Manila in Acta Medica Philippina
- Vol. 55 (8)
Open AccessMaxillary Occlusion Rehabilitation of Multiple Anterior Teeth Agenesis Followed by Tooth Wear: A Case Report
A 19-year-old female patient came with the chief complaint that the upper anterior teeth looked small and with many spaces. The patient claimed that the tooth had never been replaced since birth. The patient wanted to improve the aesthetics of the tooth. Treatment, in this case, was made using a fixed prosthetic to aesthetically rehabilitate through prosthodontic treatment in the anterior teeth agenesis followed by attrition. It can be concluded that fixed prosthodontic treatment using a splint bridge is one treatment option that can be used in multiple anterior teeth agenesis followed by tooth wear. An appropriate material selection increases the aesthetics and functional aspects of the final treatment.
- Open Access
- 11 August 2021
- Published by Universitas Airlangga in Dental Journal (Majalah Kedokteran Gigi)
- Vol. 54 (3) , 119-123
Evaluation of osteogenic properties after application of hydroxyapatite-based shells of Portunus pelagicus
Background: After tooth extraction, the socket leaves a defect on the alveolar bone. The administration of shell crab-derived hydroxyapatite maintains bone dimensions that are important for achieving successful prosthodontic treatment. Purpose: The aim of the study was to determine the osteogenic properties, such as the number of osteoclasts, osteoblasts and osteocytes, after the application of hydroxyapatite-based shell crab in the post-extraction sockets of Wistar rats. Methods: There were two groups: the control group (K) and the treatment group (T). Wistar rats were randomly divided into control and treatment groups. After tooth extraction, hydroxyapatite gel derived from Portunus pelagicus shells was applied to the tooth sockets of Wistar rats. Observations and calculations of osteoclasts, osteoblasts and osteocytes were carried out on the 14th and 28th days under a light microscope with 400 times magnification. Statistical analysis was performed using one-way ANOVA. Results: There was a significant difference (p<0.05) between the K14 and P14 groups, K28 and P28 groups, K14 and K28 groups, and P14 and P28 groups. The results indicated that there were significant differences between groups of variables. Conclusion: The application of shell crab-derived hydroxyapatite (Portunus pelagicus) was able to decrease the number of osteoclasts and increase the number of osteoblasts and osteocytes.
- 11 August 2021
- Published by Universitas Airlangga in Dental Journal (Majalah Kedokteran Gigi)
- Vol. 54 (3) , 119-123
Open AccessEvaluation of osteogenic properties after application of hydroxyapatite-based shells of Portunus pelagicus
Background: After tooth extraction, the socket leaves a defect on the alveolar bone. The administration of shell crab-derived hydroxyapatite maintains bone dimensions that are important for achieving successful prosthodontic treatment. Purpose: The aim of the study was to determine the osteogenic properties, such as the number of osteoclasts, osteoblasts and osteocytes, after the application of hydroxyapatite-based shell crab in the post-extraction sockets of Wistar rats. Methods: There were two groups: the control group (K) and the treatment group (T). Wistar rats were randomly divided into control and treatment groups. After tooth extraction, hydroxyapatite gel derived from Portunus pelagicus shells was applied to the tooth sockets of Wistar rats. Observations and calculations of osteoclasts, osteoblasts and osteocytes were carried out on the 14th and 28th days under a light microscope with 400 times magnification. Statistical analysis was performed using one-way ANOVA. Results: There was a significant difference (p<0.05) between the K14 and P14 groups, K28 and P28 groups, K14 and K28 groups, and P14 and P28 groups. The results indicated that there were significant differences between groups of variables. Conclusion: The application of shell crab-derived hydroxyapatite (Portunus pelagicus) was able to decrease the number of osteoclasts and increase the number of osteoblasts and osteocytes.
- Open Access
- 4 December 2019
- Published by University of the Philippines Manila in Acta Medica Philippina
- Vol. 53 (6)
Management of Short Alveolar Bone with Implant Retained Splinted Crown
Implant placement on maxillary posterior region has some limitations because of limited bone height, low bone density, and anatomical consideration involving the floor of the maxillary sinus. A 56-year-old male with a history of hypertension and stroke, consulted for edentulous in teeth 25 and 26 with limited bone height. A short implant for 26 (Ø 4.8 mm; 4 mm) and 25 (Ø 4.1 mm; 10 mm) were placed and splint crown was performed after 6 months.
- 4 December 2019
- Published by University of the Philippines Manila in Acta Medica Philippina
- Vol. 53 (6)
Open AccessManagement of Short Alveolar Bone with Implant Retained Splinted Crown
Implant placement on maxillary posterior region has some limitations because of limited bone height, low bone density, and anatomical consideration involving the floor of the maxillary sinus. A 56-year-old male with a history of hypertension and stroke, consulted for edentulous in teeth 25 and 26 with limited bone height. A short implant for 26 (Ø 4.8 mm; 4 mm) and 25 (Ø 4.1 mm; 10 mm) were placed and splint crown was performed after 6 months.