AFAlgimantas Fedaravičius

Algimantas Fedaravičius

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Algimantas Fedaravičius has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Transportation of Objects on an Inclined Plane Oscillating in the Longitudinal Direction Applying Dynamic Dry Friction Manipulations

    by Ribal El Banna, Kristina Liutkauskienė, Vaidas Lukoševičius, Algimantas Fedaravičius, Sigitas Kilikevičius

    A transportation system requires an asymmetry to achieve objects’ motion on an oscillating surface. Transportation methods based on vibrational techniques usually employ different types of asymmetries, such as temporal (time) asymmetry, kinematic asymmetry, wave asymmetry or power asymmetry. However, transporting an object on an inclined angle requires a relatively high net frictional force over each period of vibrational cycles due to the gravitational potential energy exerted on the object. This paper investigates the transportation of an object upward on an inclined plane that harmonically oscillates in its longitudinal direction. The novelty of this research is attributed to the upward motion of the object on the inclined plane, which is achieved by creating an additional asymmetry of the system through dry friction dynamic manipulations. For this reason, periodic dynamic dry friction manipulations have been employed to create the asymmetry of frictional conditions, resulting in a net frictional force that outweighs the gravitational force. A mathematical model has been developed using the Lagrange method, which describes the moving object’s motion. Moreover, the theoretical findings and results confirmed that the object’s velocity and direction can be controlled by dynamic dry friction manipulations. To demonstrate the technical feasibility of the proposed method, an experimental investigation was carried out where the results demonstrated that the control parameters significantly influence the characteristics of the directional motion of the moving object. This transportation method is beneficial for various modern industries engaged in transportation and manipulation tasks with objects spanning a broad range of sizes, including those operating at small scales for applications in lab-on-a-chip technology, micro-assembly lines, micro-feeder systems and other delicate component manipulation systems. The presented research advances the classical theories of vibrational transportation on inclined surfaces.


  • Open Access

    Design and Research of the Image Processing Unit and Telemetric Equipment for the Laser-Guided Very Short Range Air Defence Systems Field Simulator

    by Algimantas Fedaravicius, Karolis Jasas, Arvydas Survila, Vitas Grimaila

    In this article, the engineering concept of the laser-guided very short range air defence system field simulator, its structure, and practical use are presented. The possibilities and advantages of the practical use of the equipment developed in tactical exercises and individual training of air defence specialists are shown. The field simulator equipment without invasion and compromising functionality into the combat air defence system has been connected and installed. The simulator performs all required shooting procedures without using combat missiles, target detection, shot execution, and maintaining the target in the sighting lens until its destruction. The field simulator reduces training process expenses and increases its efficiency. In the article, the ground control and onboard control units are presented. The units consist of target detection and its positioning, coordinate defining and data transmission (global positioning system (GPS), personal computer (PC), radio frequency (RF) transceiver), pyrotechnic charge for missile launch simulation, and target destruction devices (e.g., smoke generator), whose operating principles, functional capabilities, and work reliability are ensured on the basis of conducted research. The field simulator, which was created based on synthesising the simulator systems studied, has proven itself in practise.


  • Open Access

    Aerodynamic and External Ballistic modelling of a Rocket Target with Two Motors in a Parallel Configuration

    by Hari Prasanna Manimaran, Algimantas Fedaravicius

    Rocket targets are essential for live-fire military training. RT-400 is a short-range rocket target. This rocket must be improvised for a longer range. So, two motors are used to upgrade the range of the rocket. as the dimensions of the rocket change, it is required to analyse the nose cone shape for the prediction of forces and coefficients. With obtained values, ballistic analysis is carried out to determine the theoretical maximum range and altitudes are obtained.

  • Open Access

    Dynamics of the Missile Launch from the Very Short-Range Mobile Firing Unit

    by Algimantas Fedaravičius, Karolis Jasas, Rimvydas Gaidys, Kęstutis Pilkauskas

    In this article, the results of research of dynamical processes during the first stage of a missile launch from very short-range mobile firing unit (MFU) are presented. The determined laws of motion of the system’s components enabled determining characteristic motions that need to be reconstructed by the launcher simulator intended to be developed for personnel training. The half-car approach is applied for modelling the unit which consists of a vehicle and is attached to its missile launcher. The combined system is represented by a lumped-parameter model. The mathematical model is derived by applying the principle of Lagrange differential equations. Motion laws of the components of the system as its response to excitation load generated during missile launch were determined.


  • Open Access

    Omnidirectional Manipulation of Microparticles on a Platform Subjected to Circular Motion Applying Dynamic Dry Friction Control

    by Sigitas Kilikevičius, Kristina Liutkauskienė, Ernestas Uldinskas, Ribal El Banna, Algimantas Fedaravičius

    Currently used planar manipulation methods that utilize oscillating surfaces are usually based on asymmetries of time, kinematic, wave, or power types. This paper proposes a method for omnidirectional manipulation of microparticles on a platform subjected to circular motion, where the motion of the particle is achieved and controlled through the asymmetry created by dynamic friction control. The range of angles at which microparticles can be directed, and the average velocity were considered figures of merit. To determine the intrinsic parameters of the system that define the direction and velocity of the particles, a nondimensional mathematical model of the proposed method was developed, and modeling of the manipulation process was carried out. The modeling has shown that it is possible to direct the particle omnidirectionally at any angle over the full 2π range by changing the phase shift between the function governing the circular motion and the dry friction control function. The shape of the trajectory and the average velocity of the particle depend mainly on the width of the dry friction control function. An experimental investigation of omnidirectional manipulation was carried out by implementing the method of dynamic dry friction control. The experiments verified that the asymmetry created by dynamic dry friction control is technically feasible and can be applied for the omnidirectional manipulation of microparticles. The experimental results were consistent with the modeling results and qualitatively confirmed the influence of the control parameters on the motion characteristics predicted by the modeling. The study enriches the classical theories of particle motion on oscillating rigid plates, and it is relevant for the industries that implement various tasks related to assembling, handling, feeding, transporting, or manipulating microparticles.


  • Modeling of the Missile Launch Dynamic Processes in Short-Range Air Defense System

    by Algimantas Fedaravičius, Karolis Jasas, Egidijus Sližys, Arvydas Survila

    Armament systems such as guns, launchers simulators are effective tools for training armed forces personnel. A firearm is a complex biomechanical system, so the best quality of training is achieved when training in a simulator, repeating the dynamic processes of the weapon by simulating the perception of real weapon use (feeling). The paper investigates the dynamic and stability properties of the short-range air defense system RBS-70. The RBS-70 short-range air defense system is designed to combat low-flying air targets. The purpose of this paper is to present the physical and mathematical models with com numerical dynamic simulation of the launcher in the first phase of missile flight. The theoretical model was formulated in the vertical plane and verified by the numerical modeling simulation.


  • Open Access

    Vibrational Transportation on a Platform Subjected to Sinusoidal Displacement Cycles Employing Dry Friction Control

    by Sigitas Kilikevičius, Algimantas Fedaravičius

    Currently used vibrational transportation methods are usually based on asymmetries of geometric, kinematic, wave, or time types. This paper investigates the vibrational transportation of objects on a platform that is subjected to sinusoidal displacement cycles, employing periodic dynamic dry friction control. This manner of dry friction control creates an asymmetry, which is necessary to move the object. The theoretical investigation on functional capabilities and transportation regimes was carried out using a developed parametric mathematical model, and the control parameters that determine the transportation characteristics such as velocity and direction were defined. To test the functional capabilities of the proposed method, an experimental setup was developed, and experiments were carried out. The results of the presented research indicate that the proposed method ensures smooth control of the transportation velocity in a wide range and allows it to change the direction of motion. Moreover, the proposed method offers other new functional capabilities, such as a capability to move individual objects on the same platform in opposite directions and at different velocities at the same time by imposing different friction control parameters on different regions of the platform or on different objects. In addition, objects can be subjected to translation and rotation at the same time by imposing different friction control parameters on different regions of the platform. The presented research extends the classical theory of vibrational transportation and has a practical value for industries that operate manufacturing systems performing tasks such as handling and transportation, positioning, feeding, sorting, aligning, or assembling.


  • Open Access

    Manipulation of Miniature and Microminiature Bodies on a Harmonically Oscillating Platform by Controlling Dry Friction

    by Sigitas Kilikevičius, Algimantas Fedaravičius, Virginija Daukantienė, Kristina Liutkauskienė, Linas Paukštaitis

    Currently used nonprehensile manipulation systems that are based on vibrational techniques employ temporal (vibrational) asymmetry, spatial asymmetry, or force asymmetry to provide and control a directional motion of a body. This paper presents a novel method of nonprehensile manipulation of miniature and microminiature bodies on a harmonically oscillating platform by creating a frictional asymmetry through dynamic dry friction control. To theoretically verify the feasibility of the method and to determine the control parameters that define the motion characteristics, a mathematical model was developed, and modeling was carried out. Experimental setups for miniature and microminiature bodies were developed for nonprehensile manipulation by dry friction control, and manipulation experiments were carried out to experimentally verify the feasibility of the proposed method and theoretical findings. By revealing how characteristic control parameters influence the direction and velocity, the modeling results theoretically verified the feasibility of the proposed method. The experimental investigation verified that the proposed method is technically feasible and can be applied in practice, as well as confirmed the theoretical findings that the velocity and direction of the body can be controlled by changing the parameters of the function for dynamic dry friction control. The presented research enriches the classical theories of manipulation methods on vibrating plates and platforms, as well as the presented results, are relevant for industries dealing with feeding, assembling, or manipulation of miniature and microminiature bodies.


  • Open Access

    Nonprehensile Manipulation of Parts on a Horizontal Circularly Oscillating Platform with Dynamic Dry Friction Control

    by Sigitas Kilikevičius, Kristina Liutkauskienė, Algimantas Fedaravičius

    This paper presents a novel method for nonprehensile manipulation of parts on a circularly oscillating platform when the effective coefficient of dry friction between the part and the platform is being dynamically controlled. Theoretical and experimental analyses have been performed to validate the proposed method and to determine the control parameters that define the characteristics of the part’s motion. A mathematical model of the manipulation process with dynamic dry friction control was developed and solved. The modeling showed that by changing the phase shift between the function for dynamic dry friction control and the function defining the circular motion of the platform, the part can be moved in any direction as the angle of displacement can be controlled in a full range from 0 to 2π. The nature of the trajectory and the mean displacement velocity of the part mainly depend on the width of the rectangular function for dynamic dry friction control. To verify the theoretical findings, an experimental setup was developed, and experiments of manipulation were carried out. The experimental results qualitatively confirmed the theoretical findings. The presented analysis enriches the classical theories of nonprehensile manipulation on oscillating platforms, and the presented findings are relevant for mechatronics, robotics, mechanics, electronics, medical, and other industries.


  • Numerical Study on Internal Ballistics Characteristics of a Solid Propellant Rocket Motor

    by Fedaravičius Algimantas, Račkauskas Saulius, Survila Arvydas

    The viability of numerical simulations to design a solid propellant rocket motor, as opposed to static testing, is discussed in this paper. The results demonstrate that an objectively more detailed insight into the processes taking place within the motor in active combustion can be gained by employing computer simulations. The abundance of readily available computing power allows complex simulations to be run on personal desktop computers, thus, saving money by eliminating the need for static testing during the design phase of the motor. The computer simulation results are validated by a comparison with test data gathered during static tests on the motor. In this study, an RM-12K solid propellant rocket motor is designed and developed, which is currently used in real-world air defence training applications, and therefore, sufficient empirical data are available. The numerical method, based on computer simulations using personal computers, is sufficiently accurate to allow for motor design decisions and an adequate substitute for static testing. Even though a single simulation can take up to 715 h on an 8-core personal machine, it is still an effective solution.