Aravind Simon John Francis Rajeswary
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Aravind Simon John Francis Rajeswary has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- Vijayakumar Anand
Institute of Physics, University of Tartu, Tartu, Estonia
13 shared publications - Shivasubramanian Gopinath
Institute of Physics, University of Tartu, W. Ostwaldi 1, 50411 Tartu, Estonia
12 shared publications - Saulius Juodkazis
Optical Sciences Centre, Swinburne University of Technology, Hawthorn, VIC 3122, Australia
9 shared publications - Francis Gracy Arockiaraj
Institute of Physics, University of Tartu, W. Ostwaldi 1, 50411 Tartu, Estonia
8 shared publications - Daniel Smith
Optical Sciences Centre and ARC Training Centre in Surface Engineering for Advanced Materials (SEAM), School of Science, Swinburne University of Technology, Hawthorn, VIC 3122, Australia
7 shared publications - Soon Hock Ng
Optical Sciences Centre and ARC Training Centre in Surface Engineering for Advanced Materials (SEAM), School of Science, Swinburne University of Technology, Hawthorn, VIC 3122, Australia
7 shared publications
Latest Publications
- Open Access
- 27 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 76955-76962
Super-Resolution Correlating Optical Endoscopy
Optical endoscopy is a widely used minimally invasive diagnostic tool for imaging internal organs. The imaging resolution is defined by the numerical aperture of the objective lens. In this study, we proposed and demonstrated a Super-resolution Correlating OPtical Endoscopy (SCOPE) system. In SCOPE, modified recording and reconstruction methods are introduced with the existing built-in endoscopy lens. Instead of recording a single image, multiple images of the object are recorded by scanning the tip of the endoscope around the object. The recorded low-resolution images of the object are arranged as sub-matrices in a 2D matrix. Another similar 2D matrix with either recorded or synthesized point spread functions (PSFs) is created. The 2D matrices of the object and the PSF were processed using a deconvolution algorithm to reconstruct a super-resolution image of the object. Both simulation and proof-of-concept experimental studies have been presented. SCOPE neither requires any additional optical element nor any changes in the endoscopy system itself; therefore, it can be easily implemented in commercial endoscopy systems.
- 27 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 76955-76962
Open AccessSuper-Resolution Correlating Optical Endoscopy
Optical endoscopy is a widely used minimally invasive diagnostic tool for imaging internal organs. The imaging resolution is defined by the numerical aperture of the objective lens. In this study, we proposed and demonstrated a Super-resolution Correlating OPtical Endoscopy (SCOPE) system. In SCOPE, modified recording and reconstruction methods are introduced with the existing built-in endoscopy lens. Instead of recording a single image, multiple images of the object are recorded by scanning the tip of the endoscope around the object. The recorded low-resolution images of the object are arranged as sub-matrices in a 2D matrix. Another similar 2D matrix with either recorded or synthesized point spread functions (PSFs) is created. The 2D matrices of the object and the PSF were processed using a deconvolution algorithm to reconstruct a super-resolution image of the object. Both simulation and proof-of-concept experimental studies have been presented. SCOPE neither requires any additional optical element nor any changes in the endoscopy system itself; therefore, it can be easily implemented in commercial endoscopy systems.
- Open Access
- 17 April 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (4) , 537
Extending the Depth of Focus of an Infrared Microscope Using a Binary Axicon Fabricated on Barium Fluoride
Axial resolution is one of the most important characteristics of a microscope. In all microscopes, a high axial resolution is desired in order to discriminate information efficiently along the longitudinal direction. However, when studying thick samples that do not contain laterally overlapping information, a low axial resolution is desirable, as information from multiple planes can be recorded simultaneously from a single camera shot instead of plane-by-plane mechanical refocusing. In this study, we increased the focal depth of an infrared microscope non-invasively by introducing a binary axicon fabricated on a barium fluoride substrate close to the sample. Preliminary results of imaging the thick and sparse silk fibers showed an improved focal depth with a slight decrease in lateral resolution and an increase in background noise.
- 17 April 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (4) , 537
Open AccessExtending the Depth of Focus of an Infrared Microscope Using a Binary Axicon Fabricated on Barium Fluoride
Axial resolution is one of the most important characteristics of a microscope. In all microscopes, a high axial resolution is desired in order to discriminate information efficiently along the longitudinal direction. However, when studying thick samples that do not contain laterally overlapping information, a low axial resolution is desirable, as information from multiple planes can be recorded simultaneously from a single camera shot instead of plane-by-plane mechanical refocusing. In this study, we increased the focal depth of an infrared microscope non-invasively by introducing a binary axicon fabricated on a barium fluoride substrate close to the sample. Preliminary results of imaging the thick and sparse silk fibers showed an improved focal depth with a slight decrease in lateral resolution and an increase in background noise.
- Open Access
- 8 March 2024
- Published by MDPI AG in Preprints.org
Extending the Depth of Focus of Infrared Microscope Using a Binary Axicon Fabricated on Barium Fluoride
Axial resolution is one of the most important characteristics of a microscope. In all microscopes, a high axial resolution is desired in order to discriminate information efficiently along the longitudinal direction. However, when studying thick samples that do not contain laterally overlapping information, a low axial resolution is desirable as information from multiple planes can be recorded simultaneously from a single camera shot instead of plane-by-plane mechanical refocusing. In this study, we increased the focal depth of an infrared microscope non-invasively by introducing a binary axicon fabricated on barium fluoride substrate close to the sample. Preliminary results of imaging thick and sparse silk fibers showed an improved focal depth with a slight decrease in lateral resolution and increase in background noise.
- 8 March 2024
- Published by MDPI AG in Preprints.org
Open AccessExtending the Depth of Focus of Infrared Microscope Using a Binary Axicon Fabricated on Barium Fluoride
Axial resolution is one of the most important characteristics of a microscope. In all microscopes, a high axial resolution is desired in order to discriminate information efficiently along the longitudinal direction. However, when studying thick samples that do not contain laterally overlapping information, a low axial resolution is desirable as information from multiple planes can be recorded simultaneously from a single camera shot instead of plane-by-plane mechanical refocusing. In this study, we increased the focal depth of an infrared microscope non-invasively by introducing a binary axicon fabricated on barium fluoride substrate close to the sample. Preliminary results of imaging thick and sparse silk fibers showed an improved focal depth with a slight decrease in lateral resolution and increase in background noise.
- Open Access
- 14 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Coded Aperture-Based Self-wavefront Interference Using Transverse Splitting Holography
Self-wavefront interference transverse splitting holography (SWITSH) is a recently developed holographic technique to solve a fundamental problem in the manufacturing of large-area diffractive lenses. In SWITSH, a low NA diffractive lens modulates the light from an object, and the modulated light is interfered with light from the same object that reaches beyond the aperture of the diffractive lens. The resulting self-interference hologram is processed with the pre-recorded point spread hologram using the Lucy-Richardson-Rosen algorithm. Since the self-interference hologram is formed by collecting light beyond the NA of the diffractive lens, it acquires the object information corresponding to the higher spatial frequencies of the object. Consequently, a higher imaging resolution is obtained in SWITSH compared to that of direct imaging with a diffractive lens. In the proof-of-concept study, a resolution improvement of an order was demonstrated. However, the optical architecture of the first version of SWITSH was not optimal, as the strength of the self-interference signal was weak. In this study, we improve SWITSH using different coded apertures, such as axicon and spiral element. An improvement in the strength of the self-interference signal was noticed with the axicon and spiral element. Simulation and experimental results using a diffractive lens, axicon and spiral element are presented.
- 14 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Open AccessCoded Aperture-Based Self-wavefront Interference Using Transverse Splitting Holography
Self-wavefront interference transverse splitting holography (SWITSH) is a recently developed holographic technique to solve a fundamental problem in the manufacturing of large-area diffractive lenses. In SWITSH, a low NA diffractive lens modulates the light from an object, and the modulated light is interfered with light from the same object that reaches beyond the aperture of the diffractive lens. The resulting self-interference hologram is processed with the pre-recorded point spread hologram using the Lucy-Richardson-Rosen algorithm. Since the self-interference hologram is formed by collecting light beyond the NA of the diffractive lens, it acquires the object information corresponding to the higher spatial frequencies of the object. Consequently, a higher imaging resolution is obtained in SWITSH compared to that of direct imaging with a diffractive lens. In the proof-of-concept study, a resolution improvement of an order was demonstrated. However, the optical architecture of the first version of SWITSH was not optimal, as the strength of the self-interference signal was weak. In this study, we improve SWITSH using different coded apertures, such as axicon and spiral element. An improvement in the strength of the self-interference signal was noticed with the axicon and spiral element. Simulation and experimental results using a diffractive lens, axicon and spiral element are presented.
- Open Access
- 14 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Faithful Transfer of 3D Propagation Characteristics of Deterministic and Random Optical Fields to Coded Aperture Imaging Systems Using Lucy-Richardson-Rosen Algorithm
Engineering the complex amplitude and polarization of light is essential for various applications. In this direction, many deterministic and random optical beams such as Airy Bessel, and self-rotating beams were developed. While the above beams satisfied the requirements for the targeted applications, they are not suitable for imaging applications in spite of the valuable axial characteristics they possess, as they are not effective object-image mapping elements. Consequently, when exotic beams were implemented for direct imaging, only a distorted image was obtained. However, the scenario is different in coded aperture imaging (CAI) methods, where the imaging mode is indirect, consisting of optical recording and computational image recovery. Therefore, the point spread function (PSF) in CAI is not the recorded intensity distribution but the reconstructed intensity distribution. By employing a suitable computational reconstruction method, it is possible to convert the recorded intensity distribution into a Delta-like function. In this study, Lucy-Richardson-Rosen algorithm has been implemented as a generalized image recovery method for a wide range of optical beams, and the performance is validated in both simulation and optical experiments.
- 14 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Open AccessFaithful Transfer of 3D Propagation Characteristics of Deterministic and Random Optical Fields to Coded Aperture Imaging Systems Using Lucy-Richardson-Rosen Algorithm
Engineering the complex amplitude and polarization of light is essential for various applications. In this direction, many deterministic and random optical beams such as Airy Bessel, and self-rotating beams were developed. While the above beams satisfied the requirements for the targeted applications, they are not suitable for imaging applications in spite of the valuable axial characteristics they possess, as they are not effective object-image mapping elements. Consequently, when exotic beams were implemented for direct imaging, only a distorted image was obtained. However, the scenario is different in coded aperture imaging (CAI) methods, where the imaging mode is indirect, consisting of optical recording and computational image recovery. Therefore, the point spread function (PSF) in CAI is not the recorded intensity distribution but the reconstructed intensity distribution. By employing a suitable computational reconstruction method, it is possible to convert the recorded intensity distribution into a Delta-like function. In this study, Lucy-Richardson-Rosen algorithm has been implemented as a generalized image recovery method for a wide range of optical beams, and the performance is validated in both simulation and optical experiments.
- Open Access
- 14 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Realizing Fresnel Incoherent Correlation Holography as a Coded Aperture Imaging System using Advanced Computational Algorithms
Fresnel incoherent correlation holography (FINCH) also called as incoherent digital holography. In FINCH, a self-interference Fresnel hologram is created when light from an object point is split into two, modulated using two different quadratic phase masks and interfered. At least three such holograms are needed with phase shifts $0,2\pi /3$ and $4\pi /3$ and combined to remove the twin image and bias terms during computational reconstruction involving Fresnel backpropagation. When the FINCH setup is engineered to achieve the same beam diameter for the two interfering beams, a super lateral resolution which is 1.5 times that of a direct imaging system for the same numerical aperture, is obtained. FINCH has a low temporal and axial resolution and low light throughput when compared to the direct imaging system. In this study, FINCH is enhanced and realized as a coded aperture imaging (CAI) system using three computational algorithms: Transport of Amplitude into Phase based on Gerchberg Saxton Algorithm (TAP-GSA), Lucy-Richardson-Rosen algorithm (LRRA) and computational point spread function engineering (CPSFE) technique. The PSF is recorded for FINCH in the first step as in CAI and used as the reconstruction function. The TAP-GSA was used to improve the design of phase masks and achieve a high light throughput. The CPSFE was used to shift the lateral resolution limit from the diameter of the pinhole which is used for recording the PSF to the limit of FINCH. The LRRA was used for the reconstruction of FINCH holograms. Optical experimental results of CAI-inspired ‘perfect’ FINCH are promising for applications in fluorescence microscopy.- 14 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Open AccessRealizing Fresnel Incoherent Correlation Holography as a Coded Aperture Imaging System using Advanced Computational Algorithms
Fresnel incoherent correlation holography (FINCH) also called as incoherent digital holography. In FINCH, a self-interference Fresnel hologram is created when light from an object point is split into two, modulated using two different quadratic phase masks and interfered. At least three such holograms are needed with phase shifts $0,2\pi /3$ and $4\pi /3$ and combined to remove the twin image and bias terms during computational reconstruction involving Fresnel backpropagation. When the FINCH setup is engineered to achieve the same beam diameter for the two interfering beams, a super lateral resolution which is 1.5 times that of a direct imaging system for the same numerical aperture, is obtained. FINCH has a low temporal and axial resolution and low light throughput when compared to the direct imaging system. In this study, FINCH is enhanced and realized as a coded aperture imaging (CAI) system using three computational algorithms: Transport of Amplitude into Phase based on Gerchberg Saxton Algorithm (TAP-GSA), Lucy-Richardson-Rosen algorithm (LRRA) and computational point spread function engineering (CPSFE) technique. The PSF is recorded for FINCH in the first step as in CAI and used as the reconstruction function. The TAP-GSA was used to improve the design of phase masks and achieve a high light throughput. The CPSFE was used to shift the lateral resolution limit from the diameter of the pinhole which is used for recording the PSF to the limit of FINCH. The LRRA was used for the reconstruction of FINCH holograms. Optical experimental results of CAI-inspired ‘perfect’ FINCH are promising for applications in fluorescence microscopy. - Open Access
Single-Shot 3D Incoherent Imaging Using Deterministic and Random Optical Fields with Lucy–Richardson–Rosen Algorithm
Coded aperture 3D imaging techniques have been rapidly evolving in recent years. The two main directions of evolution are in aperture engineering to generate the optimal optical field and in the development of a computational reconstruction method to reconstruct the object’s image from the intensity distribution with minimal noise. The goal is to find the ideal aperture–reconstruction method pair, and if not that, to optimize one to match the other for designing an imaging system with the required 3D imaging characteristics. The Lucy–Richardson–Rosen algorithm (LR2A), a recently developed computational reconstruction method, was found to perform better than its predecessors, such as matched filter, inverse filter, phase-only filter, Lucy–Richardson algorithm, and non-linear reconstruction (NLR), for certain apertures when the point spread function (PSF) is a real and symmetric function. For other cases of PSF, NLR performed better than the rest of the methods. In this tutorial, LR2A has been presented as a generalized approach for any optical field when the PSF is known along with MATLAB codes for reconstruction. The common problems and pitfalls in using LR2A have been discussed. Simulation and experimental studies for common optical fields such as spherical, Bessel, vortex beams, and exotic optical fields such as Airy, scattered, and self-rotating beams have been presented. From this study, it can be seen that it is possible to transfer the 3D imaging characteristics from non-imaging-type exotic fields to indirect imaging systems faithfully using LR2A. The application of LR2A to medical images such as colonoscopy images and cone beam computed tomography images with synthetic PSF has been demonstrated. We believe that the tutorial will provide a deeper understanding of computational reconstruction using LR2A.
Open AccessSingle-Shot 3D Incoherent Imaging Using Deterministic and Random Optical Fields with Lucy–Richardson–Rosen Algorithm
Coded aperture 3D imaging techniques have been rapidly evolving in recent years. The two main directions of evolution are in aperture engineering to generate the optimal optical field and in the development of a computational reconstruction method to reconstruct the object’s image from the intensity distribution with minimal noise. The goal is to find the ideal aperture–reconstruction method pair, and if not that, to optimize one to match the other for designing an imaging system with the required 3D imaging characteristics. The Lucy–Richardson–Rosen algorithm (LR2A), a recently developed computational reconstruction method, was found to perform better than its predecessors, such as matched filter, inverse filter, phase-only filter, Lucy–Richardson algorithm, and non-linear reconstruction (NLR), for certain apertures when the point spread function (PSF) is a real and symmetric function. For other cases of PSF, NLR performed better than the rest of the methods. In this tutorial, LR2A has been presented as a generalized approach for any optical field when the PSF is known along with MATLAB codes for reconstruction. The common problems and pitfalls in using LR2A have been discussed. Simulation and experimental studies for common optical fields such as spherical, Bessel, vortex beams, and exotic optical fields such as Airy, scattered, and self-rotating beams have been presented. From this study, it can be seen that it is possible to transfer the 3D imaging characteristics from non-imaging-type exotic fields to indirect imaging systems faithfully using LR2A. The application of LR2A to medical images such as colonoscopy images and cone beam computed tomography images with synthetic PSF has been demonstrated. We believe that the tutorial will provide a deeper understanding of computational reconstruction using LR2A.
- Open Access
- 3 August 2023
- Published by MDPI AG in Preprints.org
Single Shot 3D Incoherent Imaging Using Deterministic and Random Optical Fields with Lucy-Richardson-Rosen Algorithm
Coded aperture 3D imaging techniques have been rapidly evolving in the recent years. The two main directions of evolution are in aperture engineering to generate the optimal optical field and in development of computational reconstruction to reconstruct the object’s image from the intensity distribution with a minimal noise. The goal is to find the ideal aperture-reconstruction method pair and if not, to optimize one to match the other for designing an imaging system with required 3D imaging characteristics. Lucy-Richardson-Rosen algorithm (LR2A), a recently developed computational reconstruction method was found to perform better than its predecessors such as matched filter, Weiner filter, phase-only filter, Lucy-Richardson algorithm and non-linear reconstruction (NLR) for certain apertures when the point spread function (PSF) is a real and symmetric function. For other cases of PSF, NLR performed better than the rest of the methods. In this tutorial, LR2A has been presented as a generalized approach for any optical field along with MATLAB codes for reconstruction of any image when the PSF is known. The common problems and pitfalls in using LR2A has been discussed. Simulation and experimental studies for common optical fields such as spherical, Bessel, vortex beams and exotic optical fields such as Airy, scattered and self-rotating beams have been presented. From this study, it can be seen that it is possible to transfer the 3D imaging characteristics from non-imaging type exotic fields to indirect imaging systems faithfully using LR2A. The application of LR2A to medical images such as colonoscopy images and cone beam computed tomography images with synthetic PSF has been demonstrated. We believe that the tutorial will provide a deeper understanding of computational reconstruction using LR2A.
- 3 August 2023
- Published by MDPI AG in Preprints.org
Open AccessSingle Shot 3D Incoherent Imaging Using Deterministic and Random Optical Fields with Lucy-Richardson-Rosen Algorithm
Coded aperture 3D imaging techniques have been rapidly evolving in the recent years. The two main directions of evolution are in aperture engineering to generate the optimal optical field and in development of computational reconstruction to reconstruct the object’s image from the intensity distribution with a minimal noise. The goal is to find the ideal aperture-reconstruction method pair and if not, to optimize one to match the other for designing an imaging system with required 3D imaging characteristics. Lucy-Richardson-Rosen algorithm (LR2A), a recently developed computational reconstruction method was found to perform better than its predecessors such as matched filter, Weiner filter, phase-only filter, Lucy-Richardson algorithm and non-linear reconstruction (NLR) for certain apertures when the point spread function (PSF) is a real and symmetric function. For other cases of PSF, NLR performed better than the rest of the methods. In this tutorial, LR2A has been presented as a generalized approach for any optical field along with MATLAB codes for reconstruction of any image when the PSF is known. The common problems and pitfalls in using LR2A has been discussed. Simulation and experimental studies for common optical fields such as spherical, Bessel, vortex beams and exotic optical fields such as Airy, scattered and self-rotating beams have been presented. From this study, it can be seen that it is possible to transfer the 3D imaging characteristics from non-imaging type exotic fields to indirect imaging systems faithfully using LR2A. The application of LR2A to medical images such as colonoscopy images and cone beam computed tomography images with synthetic PSF has been demonstrated. We believe that the tutorial will provide a deeper understanding of computational reconstruction using LR2A.
- Open Access
- 25 July 2023
- Published by MDPI AG in Engineering Proceedings
- Vol. 34 (1) , 28
Statement of Peer Review
In submitting conference proceedings to Engineering Proceedings, the editors of the proceedings certify to the publisher that all papers published in this volume have been subjected to peer review
- 25 July 2023
- Published by MDPI AG in Engineering Proceedings
- Vol. 34 (1) , 28
Open AccessStatement of Peer Review
In submitting conference proceedings to Engineering Proceedings, the editors of the proceedings certify to the publisher that all papers published in this volume have been subjected to peer review
- Open Access
- 24 July 2023
- Published by MDPI AG in Engineering Proceedings
- Vol. 34 (1) , 29
Preface: International Conference on Holography Meets Advanced Manufacturing (HMAM2)
The CIPHR group, Institute of Physics, University of Tartu, Estonia, and Optical Sciences Center, Swinburne University of Technology, Australia, jointly organized the interdisciplinary online conference “Holography Meets Advanced Manufacturing” during 20–22 February 2023.
- 24 July 2023
- Published by MDPI AG in Engineering Proceedings
- Vol. 34 (1) , 29
Open AccessPreface: International Conference on Holography Meets Advanced Manufacturing (HMAM2)
The CIPHR group, Institute of Physics, University of Tartu, Estonia, and Optical Sciences Center, Swinburne University of Technology, Australia, jointly organized the interdisciplinary online conference “Holography Meets Advanced Manufacturing” during 20–22 February 2023.