Jongju Lee
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jongju Lee has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Alex Nikolov
Department of Chemical and Biological Engineering, Illinois Institute of Technology, Chicago, IL 60616, USA
5 shared publications - Sohail Murad
Illinois Institute of Technology
2 shared publications - Darsh Wasan
Department of Chemical and Biological Engineering, Illinois Institute of Technology, Chicago, IL 60616, United States
1 shared publication Sohail Murad
Department of Chemical and Biological Engineering
1 shared publication
Latest Publications
- Open Access
Modeling the Relationship Between the Transition Time and Energy Barrier in Films from Nanofluid Stepwise Thinning
Liquid films formed from nanofluids exhibit a ubiquitous, multiple stepwise thinning phenomenon, where the film thins layer by layer. Under film confinement, the nanoparticles experience a significant reduction in their degrees of freedom, inducing entropy-driven structural transitions. The primary goal of this research is to model this oscillatory stepwise thinning behavior and predict the associated film thickness transition time. To achieve this, the oscillatory structural film free energy was quantified from the macroscopic contact angle of the film meniscus, providing a physically grounded measure of the energy barrier. As film thickness reduces, 2D in-layer structural ordering enhances, resulting in larger energy barriers and prolonged transition times. We present a power-law model relating the transition time to the corresponding free energy barrier. The fitted scaling exponent indicates a super-linear dependence, demonstrating that progressively thinner films resist thinning disproportionately due to confinement-induced cooperative ordering. This framework establishes a quantitative, predictive basis for understanding stepwise thinning (stratification) dynamics while offering practical insights for designing stable colloidal and interfacial assemblies.
Open AccessModeling the Relationship Between the Transition Time and Energy Barrier in Films from Nanofluid Stepwise Thinning
Liquid films formed from nanofluids exhibit a ubiquitous, multiple stepwise thinning phenomenon, where the film thins layer by layer. Under film confinement, the nanoparticles experience a significant reduction in their degrees of freedom, inducing entropy-driven structural transitions. The primary goal of this research is to model this oscillatory stepwise thinning behavior and predict the associated film thickness transition time. To achieve this, the oscillatory structural film free energy was quantified from the macroscopic contact angle of the film meniscus, providing a physically grounded measure of the energy barrier. As film thickness reduces, 2D in-layer structural ordering enhances, resulting in larger energy barriers and prolonged transition times. We present a power-law model relating the transition time to the corresponding free energy barrier. The fitted scaling exponent indicates a super-linear dependence, demonstrating that progressively thinner films resist thinning disproportionately due to confinement-induced cooperative ordering. This framework establishes a quantitative, predictive basis for understanding stepwise thinning (stratification) dynamics while offering practical insights for designing stable colloidal and interfacial assemblies.
- Open Access
- 18 December 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (12) , 1505
PET-PZT Dielectric Polarization: Electricity Harvested from Photon Energy
The effect of residual stress or heat on ferroelectrics used to convert photons into electricity was investigated. The data analysis reveals that when the PET-PZT piezoelectric transducer is UV-irradiated with a 405 nm wavelength, it becomes a photon–heat–stress electric energy converter and capacitator. Our objective was to evaluate the PET-PZT photon–heat–stress electric energy conversion performance and the role of the light’s wavelength and intensity. Converting waste energy from energy-intensive processes and systems is crucial to reducing the environmental impact and achieving net-zero emissions. To achieve these, innovative materials are needed to efficiently convert ambient energy into electricity through various physical mechanisms, such as the photovoltaic effect, thermoelectricity, piezoelectricity, triboelectricity, and radiofrequency wireless power transfer.
- 18 December 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (12) , 1505
Open AccessPET-PZT Dielectric Polarization: Electricity Harvested from Photon Energy
The effect of residual stress or heat on ferroelectrics used to convert photons into electricity was investigated. The data analysis reveals that when the PET-PZT piezoelectric transducer is UV-irradiated with a 405 nm wavelength, it becomes a photon–heat–stress electric energy converter and capacitator. Our objective was to evaluate the PET-PZT photon–heat–stress electric energy conversion performance and the role of the light’s wavelength and intensity. Converting waste energy from energy-intensive processes and systems is crucial to reducing the environmental impact and achieving net-zero emissions. To achieve these, innovative materials are needed to efficiently convert ambient energy into electricity through various physical mechanisms, such as the photovoltaic effect, thermoelectricity, piezoelectricity, triboelectricity, and radiofrequency wireless power transfer.
- 16 December 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40 (52) , 27356-27363
Surfactant-Enhanced Spreading on Solids: Roles of the Surface Tension Gradient, Spreading Contact Angle, and Viscosity
Despite its important technological applications, surfactant-enhanced (spontaneous) spreading on a solid surface and how to optimize it on surfaces with different wettabilities are not well understood. Spontaneous spreading involves a surface tension gradient (Marangoni stresses), which enhances spreading over a large area. Experimental observations reveal that the spreading rate and surfactant concentration have an optimum substrate wettability of 60 ± 5° (Hill, R. M. Curr. Opin. Colloid Interface Sci. 1998, 3, 247).This paper discusses why the optimum for surfactant-enhanced spreading requires an initial macroscopic three-phase contact angle of 60 ± 5°. An equation based on experimental evidence allows for the calculation of the surface tension gradient over time using data on the spreading rate, spreading macroscopic contact angle, and droplet spreading radius. This novel approach for estimating the surface tension gradient and explaining the optimum substrate wettability underscores the role of the surface tension gradient, viscosity, and substrate wettability in surfactant-enhanced spreading on solids. The roles of the spreading three-phase contact angle and surface tension gradient in surfactant-enhanced spreading were analyzed, demonstrating that the surface tension gradient contributes more significantly to the spreading rate than the contact angle. Fingering instability formation, an instability at the droplet spreading edge caused by the Marangoni stresses, also serves as evidence of the role that the surface tension gradient plays in surfactant-enhanced spreading. Furthermore, applications of surfactant-enhanced spreading were demonstrated, suggesting potential uses in oil spill removal, leaf pesticide delivery, and oil spill remediation. The goal of the proposed study is to use experimental evidence to develop a model for calculating the optimum spreading rate during the first several seconds of surfactant-enhanced spreading on a solid substrate.
- 16 December 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40 (52) , 27356-27363
Surfactant-Enhanced Spreading on Solids: Roles of the Surface Tension Gradient, Spreading Contact Angle, and Viscosity
Despite its important technological applications, surfactant-enhanced (spontaneous) spreading on a solid surface and how to optimize it on surfaces with different wettabilities are not well understood. Spontaneous spreading involves a surface tension gradient (Marangoni stresses), which enhances spreading over a large area. Experimental observations reveal that the spreading rate and surfactant concentration have an optimum substrate wettability of 60 ± 5° (Hill, R. M. Curr. Opin. Colloid Interface Sci. 1998, 3, 247).This paper discusses why the optimum for surfactant-enhanced spreading requires an initial macroscopic three-phase contact angle of 60 ± 5°. An equation based on experimental evidence allows for the calculation of the surface tension gradient over time using data on the spreading rate, spreading macroscopic contact angle, and droplet spreading radius. This novel approach for estimating the surface tension gradient and explaining the optimum substrate wettability underscores the role of the surface tension gradient, viscosity, and substrate wettability in surfactant-enhanced spreading on solids. The roles of the spreading three-phase contact angle and surface tension gradient in surfactant-enhanced spreading were analyzed, demonstrating that the surface tension gradient contributes more significantly to the spreading rate than the contact angle. Fingering instability formation, an instability at the droplet spreading edge caused by the Marangoni stresses, also serves as evidence of the role that the surface tension gradient plays in surfactant-enhanced spreading. Furthermore, applications of surfactant-enhanced spreading were demonstrated, suggesting potential uses in oil spill removal, leaf pesticide delivery, and oil spill remediation. The goal of the proposed study is to use experimental evidence to develop a model for calculating the optimum spreading rate during the first several seconds of surfactant-enhanced spreading on a solid substrate.
- Open Access
- 4 April 2023
- Published by MDPI AG in Colloids and Interfaces
- Vol. 7 (2) , 29
Ballpoint/Rollerball Pens: Writing Performance and Evaluation
Here, a brief history of the development of the ballpoint/rollerball pen and the fountain pen is presented. Their principle of operation is analogous that of multipart microfluidics-type devices, where capillarity–gravity drives the ink, a complex fluid, to flow in the confinement of a micrometer-sized canal or to lubricate a ball rotating in a socket. The differences in the operational writing principles of the fountain pen versus the ballpoint/rollerball pen are discussed. The ballpoint/rollerball pen’s manner of writing was monitored using lens end fiber optics and was digitally recorded. The ball rotation rate per unit length was monitored using a piezoelectric disk oscilloscope technique. The role of ink (a complex fluid) chemistry in the wetting phenomenon is elucidated. We also discuss methods for studying and evaluating ink–film–ball–paper surface wetting. The goal of the proposed research is to optimize and improve the writing performance of the ballpoint/rollerball pen.
- 4 April 2023
- Published by MDPI AG in Colloids and Interfaces
- Vol. 7 (2) , 29
Open AccessBallpoint/Rollerball Pens: Writing Performance and Evaluation
Here, a brief history of the development of the ballpoint/rollerball pen and the fountain pen is presented. Their principle of operation is analogous that of multipart microfluidics-type devices, where capillarity–gravity drives the ink, a complex fluid, to flow in the confinement of a micrometer-sized canal or to lubricate a ball rotating in a socket. The differences in the operational writing principles of the fountain pen versus the ballpoint/rollerball pen are discussed. The ballpoint/rollerball pen’s manner of writing was monitored using lens end fiber optics and was digitally recorded. The ball rotation rate per unit length was monitored using a piezoelectric disk oscilloscope technique. The role of ink (a complex fluid) chemistry in the wetting phenomenon is elucidated. We also discuss methods for studying and evaluating ink–film–ball–paper surface wetting. The goal of the proposed research is to optimize and improve the writing performance of the ballpoint/rollerball pen.
- 29 January 2023
- Published by Elsevier in Advances in Colloid and Interface Science
- Vol. 313, 102847
DLVO surface forces in liquid films and statistical mechanics of colloidal oscillatory structural forces in dispersion stability
- 29 January 2023
- Published by Elsevier in Advances in Colloid and Interface Science
- Vol. 313, 102847
DLVO surface forces in liquid films and statistical mechanics of colloidal oscillatory structural forces in dispersion stability