Pakharuddin Mohd Samin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Pakharuddin Mohd Samin has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Abdulmunem Raad Abdulmunem
University of Technology - Iraq
2 shared publications - Izhari Izmi Mazali
University of Technology Malaysia
2 shared publications - Abdullah Jubair
School of Mechanical Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Johor Bahru 81310, Malaysia
1 shared publication - Abdullateef A. Jadallah
Mechanical Department, College of Engineering- Al Shirqat, Tikrit University, Tikrit, Iraq
1 shared publication - Binfa Bongfa
Federal Polytechnic
1 shared publication - Habibah Ghazali
Health & Engineering Victoria University
1 shared publication
Latest Publications
- Open Access
- 29 July 2026
- Published by Yildiz Technical University in Journal of Thermal Engineering
- Vol. 12 (6) , 2276
Sustainability in thermal applications using bio-phase change materials: a review
Bio-based phase change materials offer a promising solution for environmentally friendly thermal energy storage systems. Bio-phase-change materials exhibit desirable properties, such as high latent heat, low vapor pressure in the melt, chemical stability, safety, and cost-effectiveness. Unlike their petroleum-based counterparts, bio-phase change materials, being entirely hydrogenated, pose a significantly lower risk of oxidation even after multiple solidification and melting cycles. Moreover, their production can be scaled up using readily available, inexpensive, and biocompatible sources such as animal fat mixtures and oils. This paper provides an extensive review and analysis of studies on the development of bio-phase change materials (BPCMs), the design of bio-supported matrix configurations, phase change procedures, and their integrated use, manufacture, and application in thermal energy storage systems. Its purpose is to objectively examine the viability of different kinds of BPCMs in thermal energy storage applications, emphasizing their life-cycle impacts and prospective advantages, while recognizing existing problems and limitations. This work advances our understanding of how BPCMs can be used efficiently in various thermal energy storage systems.
- 29 July 2026
- Published by Yildiz Technical University in Journal of Thermal Engineering
- Vol. 12 (6) , 2276
Open AccessSustainability in thermal applications using bio-phase change materials: a review
Bio-based phase change materials offer a promising solution for environmentally friendly thermal energy storage systems. Bio-phase-change materials exhibit desirable properties, such as high latent heat, low vapor pressure in the melt, chemical stability, safety, and cost-effectiveness. Unlike their petroleum-based counterparts, bio-phase change materials, being entirely hydrogenated, pose a significantly lower risk of oxidation even after multiple solidification and melting cycles. Moreover, their production can be scaled up using readily available, inexpensive, and biocompatible sources such as animal fat mixtures and oils. This paper provides an extensive review and analysis of studies on the development of bio-phase change materials (BPCMs), the design of bio-supported matrix configurations, phase change procedures, and their integrated use, manufacture, and application in thermal energy storage systems. Its purpose is to objectively examine the viability of different kinds of BPCMs in thermal energy storage applications, emphasizing their life-cycle impacts and prospective advantages, while recognizing existing problems and limitations. This work advances our understanding of how BPCMs can be used efficiently in various thermal energy storage systems.
- Open Access
- 20 March 2024
- Published by Universiti Malaysia Pahang Al-Sultan Abdullah Press (UMPSA Press) in International Journal of Automotive and Mechanical Engineering
- Vol. 21 (1) , 11099-11124
Development of a Dynamic Hitch Lift Controller using a Hybrid Control Strategy in A Heavy Combination Vehicle
This study presents a novel hybrid control strategy for the active hitch system, named the Dynamic Hitch Lift (DHIL), comprising a hybrid controller and a force actuator. The controller was designed to mitigate longitudinal load transfer in heavy combination vehicles by reducing the semitrailer pitch rate and rejecting the pitch moment, assisted by the virtual Skyhook moment. The new controller can calculate the desired force of the DHIL actuator to counter incoming load transfer during harsh braking exceeding 0.5 g braking deceleration. The proposed controller was assessed using a verified 12-degrees-of-freedom tractor-semitrailer model in harsh braking tests across different vehicle configurations. The first evaluation involved a stability test to demonstrate the stability of the controller in reducing load transfer across different vehicle configurations. The second evaluation was on controller performance, which revealed that the dynamic vehicle response has efficiently reduced load transfer by up to 9.14%. The third evaluation has focused on the DHIL actuator performance, which indicated that the actuator generated a force of 159,197 N, which translated into a stepper motor torque of 1,695 Nm at a speed of 1,000 rpm. Simulation results affirmed that the proposed DHIL controller was stable and could effectively reduce longitudinal load transfer in heavy combination vehicles during harsh braking.
- 20 March 2024
- Published by Universiti Malaysia Pahang Al-Sultan Abdullah Press (UMPSA Press) in International Journal of Automotive and Mechanical Engineering
- Vol. 21 (1) , 11099-11124
Open AccessDevelopment of a Dynamic Hitch Lift Controller using a Hybrid Control Strategy in A Heavy Combination Vehicle
This study presents a novel hybrid control strategy for the active hitch system, named the Dynamic Hitch Lift (DHIL), comprising a hybrid controller and a force actuator. The controller was designed to mitigate longitudinal load transfer in heavy combination vehicles by reducing the semitrailer pitch rate and rejecting the pitch moment, assisted by the virtual Skyhook moment. The new controller can calculate the desired force of the DHIL actuator to counter incoming load transfer during harsh braking exceeding 0.5 g braking deceleration. The proposed controller was assessed using a verified 12-degrees-of-freedom tractor-semitrailer model in harsh braking tests across different vehicle configurations. The first evaluation involved a stability test to demonstrate the stability of the controller in reducing load transfer across different vehicle configurations. The second evaluation was on controller performance, which revealed that the dynamic vehicle response has efficiently reduced load transfer by up to 9.14%. The third evaluation has focused on the DHIL actuator performance, which indicated that the actuator generated a force of 159,197 N, which translated into a stepper motor torque of 1,695 Nm at a speed of 1,000 rpm. Simulation results affirmed that the proposed DHIL controller was stable and could effectively reduce longitudinal load transfer in heavy combination vehicles during harsh braking.
- Open Access
- 1 March 2023
- Published by Human Resources Management Academic Research Society (HRMARS) in International Journal of Academic Research in Business and Social Sciences
- Vol. 13 (3) , 1006-1016
Job Performance of Shipyard Workforce in the Shipbuilding and Ship Repair Industry: Do Competencies Matter in Malaysian Shipyards?
HRMARS is well established journal publisher based in Pakistan. It is publishing prominent journals in social sciences since 2011.
- 1 March 2023
- Published by Human Resources Management Academic Research Society (HRMARS) in International Journal of Academic Research in Business and Social Sciences
- Vol. 13 (3) , 1006-1016
Open AccessJob Performance of Shipyard Workforce in the Shipbuilding and Ship Repair Industry: Do Competencies Matter in Malaysian Shipyards?
HRMARS is well established journal publisher based in Pakistan. It is publishing prominent journals in social sciences since 2011.
- Open Access
- 18 January 2023
- Published by Akademia Baru Publishing in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
- Vol. 101 (1) , 11-36
Review on Flow Controls for Vehicles Aerodynamic Drag Reduction
Reducing aerodynamic drag in automobiles has been one of the focuses in automotive industry as it will increase vehicles performance and reduce power consumption which subsequently save the environment. Drag is a force that tend to pull the vehicle backwards. Pressure drag is the major contributor to drag of vehicle which caused by lower pressure in the rear area compared to front of vehicle. When vehicle moves forward, the stagnation point occurs in the front part of vehicle. The airflow then goes over the vehicle and separate at the back due to adverse pressure gradient. Thus, flow separation is created in the rear area of vehicle as indicated by the wake. Wake is a low-pressure region that need to be reduced so that the pressure between the front and rear could be reduced to minimize the drag. Flow control is introduced to delay this flow separation and it has been categorized as active and passive. Active flow controls require power input while passive flow controls do not need power input. This review article will explore those studies on flow controls applied in automobiles and investigate their working mechanisms along with research gaps detected. Relative comparison of effectiveness for each flow control is unfeasible as the parameters used differs but this problem can be resolved. Standard parameters need to be used in future researches in order address the discrepancy of results obtained from numerous studies around the globe. A current flow control technique is proposed to be conducted in UTM Aerolab to further investigate this interesting flow field.
- 18 January 2023
- Published by Akademia Baru Publishing in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
- Vol. 101 (1) , 11-36
Open AccessReview on Flow Controls for Vehicles Aerodynamic Drag Reduction
Reducing aerodynamic drag in automobiles has been one of the focuses in automotive industry as it will increase vehicles performance and reduce power consumption which subsequently save the environment. Drag is a force that tend to pull the vehicle backwards. Pressure drag is the major contributor to drag of vehicle which caused by lower pressure in the rear area compared to front of vehicle. When vehicle moves forward, the stagnation point occurs in the front part of vehicle. The airflow then goes over the vehicle and separate at the back due to adverse pressure gradient. Thus, flow separation is created in the rear area of vehicle as indicated by the wake. Wake is a low-pressure region that need to be reduced so that the pressure between the front and rear could be reduced to minimize the drag. Flow control is introduced to delay this flow separation and it has been categorized as active and passive. Active flow controls require power input while passive flow controls do not need power input. This review article will explore those studies on flow controls applied in automobiles and investigate their working mechanisms along with research gaps detected. Relative comparison of effectiveness for each flow control is unfeasible as the parameters used differs but this problem can be resolved. Standard parameters need to be used in future researches in order address the discrepancy of results obtained from numerous studies around the globe. A current flow control technique is proposed to be conducted in UTM Aerolab to further investigate this interesting flow field.
- Open Access
- 14 January 2023
- Published by Tikrit University in Tikrit Journal of Engineering Sciences
- Vol. 30 (1) , 104-111
Insulation Materials Based on Recycled Feather Waste: A Review
Recently, the world has been moving towards reusing wastes in many industrial applications, such as buildings and automotive, to eliminate the environmental pollution impact due to increasing waste worldwide. Besides, waste reuse also leads to cost savings and improves sustainability. Therefore, this short review aims to present and discuss the recently used methods of utilizing feather waste as sustainable and renewable insulation instead of traditional petroleum-derived materials. The father's low thermal conductivity ranges from 0.024 W/(m. K) to 0.034 W/(m. K), and it's chemical composition and microstructure effectively trap air and produce a good barrier. So, feather waste fibers can be used as an effective thermal and acoustic insulation material with the same or better performance than commercially available products. However, several significant barriers and limitations associated with the manufacturing process of feathers insulations were identified in this review. These limitations make the commercial development of insulation materials based on feather waste a challenge. They need to be appropriately addressed to realize the potential of feather waste as a reliable insulation material.
- 14 January 2023
- Published by Tikrit University in Tikrit Journal of Engineering Sciences
- Vol. 30 (1) , 104-111
Open AccessInsulation Materials Based on Recycled Feather Waste: A Review
Recently, the world has been moving towards reusing wastes in many industrial applications, such as buildings and automotive, to eliminate the environmental pollution impact due to increasing waste worldwide. Besides, waste reuse also leads to cost savings and improves sustainability. Therefore, this short review aims to present and discuss the recently used methods of utilizing feather waste as sustainable and renewable insulation instead of traditional petroleum-derived materials. The father's low thermal conductivity ranges from 0.024 W/(m. K) to 0.034 W/(m. K), and it's chemical composition and microstructure effectively trap air and produce a good barrier. So, feather waste fibers can be used as an effective thermal and acoustic insulation material with the same or better performance than commercially available products. However, several significant barriers and limitations associated with the manufacturing process of feathers insulations were identified in this review. These limitations make the commercial development of insulation materials based on feather waste a challenge. They need to be appropriately addressed to realize the potential of feather waste as a reliable insulation material.
- Open Access
- 8 February 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (3) , 1735
Review of the Methods to Optimize Power Flow in Electric Vehicle Powertrains for Efficiency and Driving Performance
Electric vehicles (EV) are quickly gaining a foothold in global markets due to their zero tailpipe emissions and increasing practicality in terms of battery technologies. However, even though EV powertrains emit zero emissions during driving, their efficiency has not been fully optimized, particularly due the commonly used single-speed transmission. Hence, this paper provides an extensive review on the latest works carried out to optimize the power flow in EV powertrains using multispeed discrete transmission, continuously variable transmission and multi-motor configurations. The relevant literatures were shortlisted using a keyword search related to EV powertrain in the ScienceDirect and Scopus databases. The review focused on the related literatures published from 2018 onwards. The publications were reviewed in terms of the methodologies applied to optimize the powertrain for efficiency and driving performance. Next, the significant findings from these literatures were discussed and compared. Finally, based on the review, several future key research areas in EV powertrain efficiency and performance are highlighted.
- 8 February 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (3) , 1735
Open AccessReview of the Methods to Optimize Power Flow in Electric Vehicle Powertrains for Efficiency and Driving Performance
Electric vehicles (EV) are quickly gaining a foothold in global markets due to their zero tailpipe emissions and increasing practicality in terms of battery technologies. However, even though EV powertrains emit zero emissions during driving, their efficiency has not been fully optimized, particularly due the commonly used single-speed transmission. Hence, this paper provides an extensive review on the latest works carried out to optimize the power flow in EV powertrains using multispeed discrete transmission, continuously variable transmission and multi-motor configurations. The relevant literatures were shortlisted using a keyword search related to EV powertrain in the ScienceDirect and Scopus databases. The review focused on the related literatures published from 2018 onwards. The publications were reviewed in terms of the methodologies applied to optimize the powertrain for efficiency and driving performance. Next, the significant findings from these literatures were discussed and compared. Finally, based on the review, several future key research areas in EV powertrain efficiency and performance are highlighted.
- 22 March 2016
- Published by Wiley in Lubrication Science
- Vol. 28 (6) , 381-404
Suitable additives for vegetable oil‐based automotive shock absorber fluids: an overview
Formulation of a cost‐effective, high‐performance and eco‐friendly lubricant, largely depends on the base oil quality, then the selection of suitable additives and their proportions. Vegetable oils, identified to be eco‐friendly, renewable, future‐available and cost‐effective treasures for lubricant formulation, apart from processing, will rely much on suitable additives to meet the performance requirements for automotive shock absorber (ASA) fluids. Additives that will guarantee performance, longevity and eco‐friendliness of formulated vegetable‐based functional fluids have to be uncommonly effective, resistant to depletion, non‐toxic and highly biodegradable. Their selection in these regards will require skills and experience, which will harness the various arms of synergism as effective tools to succour the known weaknesses of the base oil. This is a review on additives that could be used in formulation of vegetable oil‐based (ASA) fluids. The outcome shows that there are customary and novel additives that are suitable for formulating vegetable oil‐based ASA fluids. Copyright © 2016 John Wiley & Sons, Ltd.
- 22 March 2016
- Published by Wiley in Lubrication Science
- Vol. 28 (6) , 381-404
Suitable additives for vegetable oil‐based automotive shock absorber fluids: an overview
Formulation of a cost‐effective, high‐performance and eco‐friendly lubricant, largely depends on the base oil quality, then the selection of suitable additives and their proportions. Vegetable oils, identified to be eco‐friendly, renewable, future‐available and cost‐effective treasures for lubricant formulation, apart from processing, will rely much on suitable additives to meet the performance requirements for automotive shock absorber (ASA) fluids. Additives that will guarantee performance, longevity and eco‐friendliness of formulated vegetable‐based functional fluids have to be uncommonly effective, resistant to depletion, non‐toxic and highly biodegradable. Their selection in these regards will require skills and experience, which will harness the various arms of synergism as effective tools to succour the known weaknesses of the base oil. This is a review on additives that could be used in formulation of vegetable oil‐based (ASA) fluids. The outcome shows that there are customary and novel additives that are suitable for formulating vegetable oil‐based ASA fluids. Copyright © 2016 John Wiley & Sons, Ltd.
- 1 January 2015
- Published by Inderscience Publishers in International Journal of Vehicle Autonomous Systems
- Vol. 13 (1) , 65
Tyre force control strategy for semi-active magnetorheological damper suspension system for light-heavy duty truck
A semi-active controller scheme for magnetorheological (MR) damper of a light-heavy vehicle suspension known as Tyre Force Control (TFC) is proposed. The effectiveness of the proposed TFC algorithm is compared with Groundhook (GRD) control. A simulation model was developed and simulated using MATLAB Simulink software. The performance of the semi-active MR damper using TFC is analytically studied. Ride test was conducted at three different speeds and two different bumps, and the simulation results of TFC and GRD are compared and analysed. The results showed that the proposed controller is able to reduce tyre force significantly compared to GRD control strategy.
- 1 January 2015
- Published by Inderscience Publishers in International Journal of Vehicle Autonomous Systems
- Vol. 13 (1) , 65
Tyre force control strategy for semi-active magnetorheological damper suspension system for light-heavy duty truck
A semi-active controller scheme for magnetorheological (MR) damper of a light-heavy vehicle suspension known as Tyre Force Control (TFC) is proposed. The effectiveness of the proposed TFC algorithm is compared with Groundhook (GRD) control. A simulation model was developed and simulated using MATLAB Simulink software. The performance of the semi-active MR damper using TFC is analytically studied. Ride test was conducted at three different speeds and two different bumps, and the simulation results of TFC and GRD are compared and analysed. The results showed that the proposed controller is able to reduce tyre force significantly compared to GRD control strategy.